Related
How to unroot Eris to 2.1 ?
How would I do that if needed ?
I can't help but think that there is an easier way that I just haven't seen in my 5 minutes of searching, but I know that you could do it this way:
Follow the unroot process back to stock 1.5: http://forum.xda-developers.com/showthread.php?t=652419
Then get the official 2.1 OTA Rom from here: http://forum.xda-developers.com/showthread.php?t=695593&highlight=ruu&page=2
Once that is installed I believe you should be on an official stock rom. The older posts mention not being able to root this, but I do think they have come up with a couple of other options for rooting if you need to go back to it. Hope this helps...
I guess we could cobble together a new "downgrade.zip" that uses the boot.img and /system/ directory from stock 2.1 instead of the ones from stock 1.5 (and of course it wouldn't need to downgrade the radio.img anymore, so that would be removed).
If you're just doing it to return the phone, I'd recommend just running the RUU for 2.1. The only reason that's never been suggested before is that it upgrades your HBOOT to 1.49 S-ON, which previously meant that it was unrootable. Now that it's rootable, it shouldn't make any difference.
es0tericcha0s said:
I can't help but think that there is an easier way that I just haven't seen in my 5 minutes of searching, but I know that you could do it this way:
Follow the unroot process back to stock 1.5: http://forum.xda-developers.com/showthread.php?t=652419
Then get the official 2.1 OTA Rom from here: http://forum.xda-developers.com/showthread.php?t=695593&highlight=ruu&page=2
Once that is installed I believe you should be on an official stock rom. The older posts mention not being able to root this, but I do think they have come up with a couple of other options for rooting if you need to go back to it. Hope this helps...
Click to expand...
Click to collapse
What's RUU ?
If you follow the guide to go to 1.5 stock then get OTA update for 2.1, can you root again later ?
The RUU is the main stock rom that the Eris comes shipped with. You can grab it here: http://forum.xda-developers.com/showthread.php?t=606699 (use the one posted by thenestor 1/2 way down the 1st page) and save it, just in case. Now they have figured out how to root all the versions of roms out there for our phones. More info found here: http://forum.xda-developers.com/showthread.php?t=725096 . I do like to help, but most of these threads are right on the first page of the Development forum. Feel free to browse through there and the stickies at the top of the forum to gather some more information. You can't be too prepared when you are messing with the internal information of your phone...
Let me know if I can help with anything else.
Hey all,
I've been perusing these and "other" forums trying to decide if I should perform the stock update and reflash one of the new roms.
I'm currently running Vegan 5.1.1 and loving it. Everything works like I want it to, it's very stable, and I've spent a lot of time "making it mine."
With the new update, and subsequent new roms released by our dear friend Roebeet, I was wondering if there would be much of a benefit for me to Nvflash to stock, perform the stock update, then reflash one of the newer roms, ie Brilliant Corners, Mountain Laurel, or his newest Adam based rom?
I've always been of the school that if it's not broken, don't fix it. I figured that these new roms were intended for those that received their gtablet with the already updated 1.2 bootloader, but I've read people on forums going from 1.1 custom roms, back ot stock, then to 1.2 then reflashing a newer rom. Most of them only report on bugs etc in the new rom, but I've not seen anyone comment on whether it was actually better than their 1.1 rom, or what, if any benefits they saw from it.
I planned on using my current setup until it's outdated significantly. For instance, if Nvidea provides drivers, and VS creates a GB update, then the wonderful devs that are working on gtablet make a true working, supported gingerbread rom, THAT'S when I'll update.
so, bottom line, would it be worth it to nvflash to stock, update to 1.2 bootloader, then install Brilliant Corners? or an I best just not fixing what isn't broken?
thanks for the replies, and I apologizse if this was addressed in another thread. I've searched, read, and couldn't find anything this specific. I've read what the update contains, and what it does, and the problems with it, but I have not read anyone adress a direct comparison betweeen the options that are currently available.
OK, don't kill me. New here, just got my Gtab today. I have read a lot and a lot and a lot. Maybe too much. I have not touched my tab yet. Can I start following the easy steps to adding a new ROM, or do I need to do something to the tab first? It looks like vegan is the one to use, but exactly what file is it that I use? I am tech savy, but very new to doing these types of things. Sorry for asking such a noob question. But my brain is in overload right now.
Thanks
Stolly
Just follow the instructions on the vegan thread. You will find the files you need there ;-)
Good luck!
I was ready to roll, but what got me thinking was the bootloader thread. Would that apply to me?
Thanks for the reply
Make sure you know which version android you are on and what bootloader you have. There is a 1.1 and a 1.2 dev branch and I think it makes a big difference. I'm still on 1.1 Vegan 5.1. Froyo and happy with that. Newer builds use different boot loader, make sure you read instructions thoroughly before you flash device.
stolly23 said:
I was ready to roll, but what got me thinking was the bootloader thread. Would that apply to me?
Thanks for the reply
Click to expand...
Click to collapse
Check your version in the settings about tablet screen. Most likely you will have a 1.1 based kernel. So to answer your question, No, it does not apply to you.
Look under system and find "about device". Android version is listed there.
Ok, so I just powered up for the first time. Adroid OS 2.2, Tap 1.1-3389. BUT, to really make things worse, I think I have a dead pixel in the display. CRAP
Well wifey says the pixel does not bother her, So I will go ahead and get the ROM going. Is the Vegan 5.1.1 the correct version?
Thanks again
Yes, vegan 5.1.1 is a 1.1 based Rom, you'll be fine with it. HOWEVER, I do suggest that you at least update to 3588. It's still a 1.1 based Rom so flashing vegan 5.1.1 will be the same. it's just a newer version, and useful in case you want ot go to the 1.2 rom's later on.
HOWEVER, me, personally, since you're stock, I would update to 3588, theen flash teh stock 4349, then flash Brilliant Corners (it's just a 1.2 bootloader port of Vegan 5.1.1) That way, if you want to ever get on the honeycomb bandwagon when all the wrinkles are ironed out, you're already on the 1.2 bootloader.
I WAS running Vegan 5.1.1, and I liked it, don't ge tme wrong. I decided to take the plunge and get to the 1.2 bootloader, since most roms will be going that direction in the future anyway. It was more work to undo what I had already done, just to get back to where you are starting from, so you are already halfway there.
I'm not allowed to post a link to another forum that contains the files and information for Brilliant Corners, but if you use some googling skills, I'm sure you can find it. The developer that was part of Vegan 5.1.1, and created TNT lite, and is currently working on the Honeycomb port, switched most 1.1 roms over to the 1.2 bootloader, including Brilliant Corners.
I'm new to all this rooting as well what helped me was some of the video tutorials on youtube. It helps to see something being done before you do it. I have Vegan-tabs 7.0.0 running on mine.
Just order a new atrix 4G. I have looked at the possible ROM's to use and I want to try out the Neutrino ROM. I have rooted devices before but I am new to Motorola devices. Please help me find the CURRENT steps I need to take to get to be able to run the Neutrino ROM? I have used the search bar but a lot of the threads that I have found contain links that are no longer valid. Such as http://forum.xda-developers.com/showthread.php?t=1154600 Also I read a this link http://www.xda-developers.com/tag/motorola-atrix-4g/ which has me a worried that I may end up having an issue because all of the guides or seem to have been written before May 15th.
Thanks for taking a look and sorry if that was a little confusing I just didn't want to get flammed for being lazy. In the end I just want to know the most up to date way to get to the Neutrino ROM?? Below I will have included the specs. If I need to post anthing else please let me know
I recieved my phone last night and set it up on Striaght Talk.
System version: 45.31.0.MB860.AsiaRetail.en.03
Model Number: MB860
Android Version: 2.3.4
Your help is GREATLY APPRIECIATED!!
Also on the youTube videos they all seem to say "DO NOT DO TRY TO UNLOCK OR ROOT IF YOU HAVE 2.3.4 OR IT WILL BRICK YOUR PHONE!!"
Is this still the case or has there been a work around for it yet??
you have to unlock bootloader, but you can get FAIL with last step.
If you will get fail - don't worry, you can still unlock it via fastboot (tested on mine INTL Atrix, but every phone is a little bit different)
flash recovery, wipe data, wipe cache, wipe dalvik, flash rom, flash gapps. Done
Thanks ovitz. Can you point me to a thread describing how to unlock the bootloader on this phone?? I can do all the other stuff that you said I need to do after the bootloader is unlocked(clearing and flashing). Just really dont want to mess up my phone. I got 2 actually one for my girlfriend as well. I have java and all SDK/ADB and all programs that I may need. Just want a step by step for comfort.
Is the search not working for you?
http://cleanimport.xda/index.php?threads/1136261/
The thread is sticky even.
DISCLAIMER: I used this to unlock the BL on my Atrix, but mine is an older one, dating back to around Feb 2011. I do not know if this still works on brand new devices, however I am not aware of any other way to unlock (there probably isn't any other way really).
What is the other way (not using fastboot) to unlock this bootloader?? I tried fastboot oem unlock and got this message "INFOOEM unlock is not implemented"
Do I need to use an SBF with RSDlite or something to make this possible? If so please point me in the direction of that thread!?!
Thanks for anyone that can help
ravilov said:
Is the search not working for you?
http://cleanimport.xda/index.php?threads/1136261/
The thread is sticky even.
DISCLAIMER: I used this to unlock the BL on my Atrix, but mine is an older one, dating back to around Feb 2011. I do not know if this still works on brand new devices, however I am not aware of any other way to unlock (there probably isn't any other way really).
Click to expand...
Click to collapse
Sorry ravilov...Did not see your post as I had started a post and then ventured off to seach XDA and some other forums again as well. I have gotten to the link that you posted several times. I just saw that is was posted a long time ago and that there is a lot of things in that post that dont make too much sense to me.
First it says "All phones If you have unlocked then try to use 2.3.4 update zip from Motorola servers, then revert back to a "pre-unlock" version(1.8.3 or earlier on ATT) you will get bricked! Do not use the OTA via experimental servers and revert to older versions WITHOUT pudding preinstalled in your sbf. ATT ONLY Get your 1.8.3 with pudding from the pudding/unlocker section below."
Then shortly after is says "Disclaimer: Tested on 1.8.3 and 2.3.4 using sbf_flash and RSDLITE 5.3.1 or higher, usual warnings being responsible for your own actions yada yada"
So I dont really know if it works or not on the newer atrix's. I dont want to brick a brand new phone and I would just like to see that some one else has done it recently. So yes my eyes are open and search did work for me if you did not see the 2 other threads I mentioned. I just want something up to date, not from early 2011. If it can be confirmed that this works or If you know someone who has unlocked it recently, that would be great to hear from them.
Thanks for posting the link to that thread anyways though. Much apprieciated!
Can anyone tell me if the IHOP method to unlock bootloader will work with my phone?? I cant post in that thread because I do not have enough posts. Here are my specs so I could get some help with which patch to use with RSDlite.
System version: 45.31.0.MB860.AsiaRetail.en.03
Model number: MB860
Android version: 2.3.4
Baseband version: N_01.100.00R
Kernel version: 2.6.32.9
[email protected] #3
APflex version: GAS_ASIA_USAOLYGBSEART_P011
GAS_ASIA_USAOLYGBSEART_A003
GAS_ASIA_USAOLEMSEARET_M001
Build number: 4.5.2A-74_OLE-31
Something else I want to note is that it was bought on ebay as unlocked so I am assuming that is the radio. When I set up the APN for straight talk it did have the choices for AT&T US, AT&T US HSDPA, AT&T US Tether, AT&T US MMS. So this is why I am a little confused/scared as to which piece of pudding to use. It looks easy enough to unlock and clear the caches and flash the ROM I will want to use. Just would like to know which one to use.
Please, please somebody help!!:fingers-crossed:
Thanks you for taking a look to help. Much apprieciated!!!
For a phone with the Asia Retail firmware, you'll want to use RSD Lite to flash the IHOP SBF. Your phone will likely enter a soft brick as stated above, just proceed with the unlock commands in fastboot from the error screen.
Since its an international phone, if you don't load a new ROM soon after unlocking then you'll need to flash the "RAMfix" from the Development section here. Most ROMs have that built in to the kernel, though, so it's not needed if you're going directly to a ROM.
In case you need it in the future, you might want to locate your stock SBF for Asia Retail and keep it on hand. If you see the Atrix Firmware Superthread in the Dev section, find the later Page that has new links to updated download sites. It's a post with a link to all Gingerbread firmwares and a link to all Froyo firmwares. Yours will have "searet" in the name. Make sure it's the same version, 2.3.4. Flashing anything older will brick you.
Good luck!
Sent from my MB865 Atrix 2 via Tapatalk 2
das8nt said:
For a phone with the Asia Retail firmware, you'll want to use RSD Lite to flash the IHOP SBF. Your phone will likely enter a soft brick as stated above, just proceed with the unlock commands in fastboot from the error screen.
Since its an international phone, if you don't load a new ROM soon after unlocking then you'll need to flash the "RAMfix" from the Development section here. Most ROMs have that built in to the kernel, though, so it's not needed if you're going directly to a ROM.
In case you need it in the future, you might want to locate your stock SBF for Asia Retail and keep it on hand. If you see the Atrix Firmware Superthread in the Dev section, find the later Page that has new links to updated download sites. It's a post with a link to all Gingerbread firmwares and a link to all Froyo firmwares. Yours will have "searet" in the name. Make sure it's the same version, 2.3.4. Flashing anything older will brick you.
Good luck!
Sent from my MB865 Atrix 2 via Tapatalk 2
Click to expand...
Click to collapse
Awesome das8nt!! wish I could thank you more than once!!! I was just confused because it said asia in some spots but the APN's were for AT&T.
Oregon2 said:
Awesome das8nt!! wish I could thank you more than once!!! I was just confused because it said asia in some spots but the APN's were for AT&T.
Click to expand...
Click to collapse
Quite welcome.
APNs are usually set by your SIM, if it's provisioned properly and the phone supports it.
Sent from my MB865 Atrix 2 via Tapatalk 2
Good to know About the APNs. Just to let you know I unlocked, rooted, and flashed the ROM the day you first replied. So I've been running with a new ROM for 3 days and the battery life is great!!
If anyone out there has installed the Neutrino ROM, I have one more question. On the Neurino ROM page it say to do these 2 steps:
"Then, after booting, click on script manager, navigate to /system/etc and run NitroCharger.sh as ROOT and at BOOT!
It is also HIGHLY recommended to download the GPS Mod found in #2. Then you're done."
I tried flashing the GPS mod but I keep gettng an error. Then on my first boot I tried going to /system/etc and from there I do not know where to locate NitroCharger to run it for either. Any help on these two issues would be great!! Also another thanks for everyone for taking a look and helping.
I would post in that thread but I still dont have enought posts.
You really need to reread the original Neutrino thread, since all of this has been answered countless times.
YOU DO NOT FLASH THE GPS MOD DIRECTLY. Open the ZIP and read the instructions.
NitroCharger is only available as an OTA update, but you might reconsider if you really want it since it's been known to cause issues.
Again, I know the thread is very large, but whatever questions or issues you might have, it's very likely answered there already.
Thanks you for just answering, even though you think I should just reread the thread. That answered my questions very fast. I will just not run Nitrocharger, I thought it may casue problems if I could not get it to run, instead you said it is the opposite. As for the GPS mod I just did open up the .zip and read the readme. I pulled out the United_States.zip
Can I just use CWM recovery to flash the US.zip now or do I have to clear all my caches and the likes beforehand?
I know your very busy and I apprieciate the time you take to just look at it.
I have just started my own business and it is going great!! but I have been working 14+ hour days with usually 9 hours hour doing very hard physical labor 6 days a week!! I need to hire more employees soon, lol. I read the whole IHOP thread from front to back and the Neutrino thread but I was very exhasted and stayed up until 330 in the morning doing it!! So again I thank you for taking your time I appriciate it very MUCH that you are helping me to have a fun android experiance and also to learn something new to me!!
Yes, you can just go ahead and flash United_States.zip. No need to clear anything.
Awesome your the MAN!! Thanks again :laugh: :good:
Afternoon all,
I have a Prime that presently has Android version "4.0.3" and build number "AndroWook Prime v2.1". I am attempting to upgrade to the lastest Hairybean release, but I am uncertain as to which instructions to follow as I am unable to determine my bootloader version. Any suggestions?
Thanks
CoosaCounty said:
Afternoon all,
I have a Prime that presently has Android version "4.0.3" and build number "AndroWook Prime v2.1". I am attempting to upgrade to the lastest Hairybean release, but I am uncertain as to which instructions to follow as I am unable to determine my bootloader version. Any suggestions?
Thanks
Click to expand...
Click to collapse
I got confused there for a minute but you are talking about Androwook 2.1 and not Androwook Hairybean 2.1.
By the Android version number you are still on ICS.
I would highly advise that you go thru the nvflash process first as you can only do it while on ICS and it makes you brick proof.
Once you have done that you just have to follow the instructions in the Hairybean thread for 2.2 which will upgrade your bootloader and recovery and then flash the rom.
I'd wait a week tho as 2.3 is due soon.
flumpster said:
I got confused there for a minute but you are talking about Androwook 2.1 and not Androwook Hairybean 2.1.
By the Android version number you are still on ICS.
I would highly advise that you go thru the nvflash process first as you can only do it while on ICS and it makes you brick proof.
Once you have done that you just have to follow the instructions in the Hairybean thread for 2.2 which will upgrade your bootloader and recovery and then flash the rom.
I'd wait a week tho as 2.3 is due soon.
Click to expand...
Click to collapse
Thank you very much for the reply; I was unaware that they are two different roms. I am going to find how to follow the nvflash process as you advised.
Thanks again.
CoosaCounty said:
Thank you very much for the reply; I was unaware that they are two different roms. I am going to find how to follow the nvflash process as you advised.
Thanks again.
Click to expand...
Click to collapse
Androwook was based off ICS. When it switched to Jellybean it became Androwook HairyBean.
nvflash is definitely worth it mate. There are people on here who would kill to go back to ICS so they could nvflash backup
Related question to this thread
flumpster said:
Androwook was based off ICS. When it switched to Jellybean it became Androwook HairyBean.
nvflash is definitely worth it mate. There are people on here who would kill to go back to ICS so they could nvflash backup
Click to expand...
Click to collapse
My query is somewhat related, and apologies before it it has previously been addressed in another thread, so I won't start a new thread for my related query.
I have just purchased an ex-display model Asus EeePad Prime here in the UK on eBay for about the third of the price as a new one. So far, all seems to be working and running fine, dongleless Wi-Fi included, but I have a question.
As soon as I turned on Wi-Fi and connected with my router, my Asus Prime started 'automatically' downloading what I assume is (the latest) firmware, I couldn't find a way to cancel the download (no user-manual, unfortunately), so I immediately turned off Wi-Fi, as I have no idea what version firmware my Prime is downloading. Right at the moment, it's running stock 4.0.3, but I don't want it downloading some firmware that I may regret at some point later. So, may I ask, is it advisable to let the firmware download and do its thang, or wait for another, different or better firmware. I am totally new to using tablets and my only other Android device is a Samsung Galaxy S3 running JB 4.1.2,
Without reading through an online manual (probably a fruitless exercise anyway) or wading though hundreds of forum posts, would one of you more experienced in firmware than I, be good enough to advise me about which is the best, most stable firmware I should be running on my Asus Prime, as well as how to disable automatic firmware updates (I couldn't find an option for that in the settings yet), and any more cautionary steps I should be advised to take before I mess up or brick my new tablet....OR point me to a thread that already has the answers to my questions here?
I'm finding this a bit frustrating, as obviously, I can't use Wi-Fi for anything else until I have an answer as to how to stop automatic downloading of firmware via Wi-Fi.....help?!?
Many thanks before.
NB.
My Kernel version:-
2.6.39.4
android @venus #1
Al.Gray said:
My query is somewhat related, and apologies before it it has previously been addressed in another thread, so I won't start a new thread for my related query.
I have just purchased an ex-display model Asus EeePad Prime here in the UK on eBay for about the third of the price as a new one. So far, all seems to be working and running fine, dongleless Wi-Fi included, but I have a question.
As soon as I turned on Wi-Fi and connected with my router, my Asus Prime started 'automatically' downloading what I assume is (the latest) firmware, I couldn't find a way to cancel the download (no user-manual, unfortunately), so I immediately turned off Wi-Fi, as I have no idea what version firmware my Prime is downloading. Right at the moment, it's running stock 4.0.3, but I don't want it downloading some firmware that I may regret at some point later. So, may I ask, is it advisable to let the firmware download and do its thang, or wait for another, different or better firmware. I am totally new to using tablets and my only other Android device is a Samsung Galaxy S3 running JB 4.1.2,
Without reading through an online manual (probably a fruitless exercise anyway) or wading though hundreds of forum posts, would one of you more experienced in firmware than I, be good enough to advise me about which is the best, most stable firmware I should be running on my Asus Prime, as well as how to disable automatic firmware updates (I couldn't find an option for that in the settings yet), and any more cautionary steps I should be advised to take before I mess up or brick my new tablet....OR point me to a thread that already has the answers to my questions here?
Many thanks before.
NB.
My Kernel version:-
2.6.39.4
android @venus #1
Click to expand...
Click to collapse
You are still on ICS and at the moment you can make nvflash backups that will make you completely brickproof. It will also allow you to go back to ICS from jellybean if you wanted to which people without the backups cannot do.
I would highly advise that you make these backups before upgrading anything.
You will need an unlocked bootloader to be able to do nvflash.
http://androidroot.mobi/pages/tegra3-guide-nvflash/
flumpster said:
You are still on ICS and at the moment you can make nvflash backups that will make you completely brickproof. It will also allow you to go back to ICS from jellybean if you wanted to which people without the backups cannot do.
I would highly advise that you make these backups before upgrading anything.
You will need an unlocked bootloader to be able to do nvflash.
http://androidroot.mobi/pages/tegra3-guide-nvflash/
Click to expand...
Click to collapse
Thanks for that tidbit, certainly something I'll need to look into (after finding 'Nerves of Steel' <g> ).....but more concerned about disabling this (unknown) firmware update auto-downloading first?.......Diolch i ti ffrind!
NB.
Guess I should read up as much as I can on AndroWook too, eh?
Oddly, the automatic firmware update OTA download has (thankfully) stalled/stopped/stuck at 23% and I have no idea what I did to stop it downloading or even how. Anyone got a clue to help me figure it out? All other downloads via Wi-Fi are working as they should.
But, saying the firmware download has stopped, is there any way that anyone knows off to cancel/delete the 23% of it that has been automatically downloaded and taking up valuable space on my internal memory, please? (I'm guessing I'd need to root my Prime to do that?)
One last important (important to me anway lol), question.....is it advisable or not to make those nvflash backups before of after rooting my ICS 4.0.3 firmware (I was thinking of using 'Viper' to root it, or maybe you guys can suggest a better application to use?), or won't rooting it before I've made those backups make any difference? Please advise, thanks.
Hope that's not too many dumb questions, but hope one of you if good and has time enough to answer them for me........ANYone......please??