Hello everyone I am looking for any programmers, hackers that develop a RFID remote program to open my garage door. If you know of any programs that could do that please tell me. I already tried tweaking G-remote but it doesn't work.
The HTC touch Pro does not have an RFID transmitter.
You need an RFID enabled device ( Intermec) and the RFID adapter to communicate with your RFID device. I am curious on one thing, is your garage RFID or Infra Red? there is a huge difference...
If your garage is IR, then most of the handheld phones do not have IR range strong enough to emit to these.
Isn't the HTC touch Pro RFID, and IR compatible so that you can you can use it as a remote like G-remote. Hell you can control anything with g remote why not a garage door, everything is possible right ? and it would be nice that you could open any garage doors if you have the DIP switch codes.?
look everyone if I could I would do this myself but I can't, so money could be involved in exchange for what I am looking for.
thank you,
HTC Raphael not a G-Remote
I have worked with a lot of RFID and IR devices. The simple answer about this phone it is not RFID capable.
Now for IR. the device has an IR port. But it does not have enough wave strengh to broadcast at distances longer than 3 to 5 feet. So in order to do what you want we would need to replace the IR Sensor,Get additional power and write the code to interface with the device and OS. All these mods would void the warranty on the device and make it cost prohibitive, but if you got time and lot's of money it is a cool project.
WinCe soft has created some remote software for TV and DVRs.
http://classic.pocketgear.com/software_detail.asp?id=22506&associateid=17
Also you can take a look at:
http://www.microsoft.com/windowsembedded/en-us/campaigns/fastertomarket.aspx?WT.srch=1
and see if someone has a device with the capabilities you are looking for.
well well then I tought I was screwed but since you know alots about RFID & IR maybe you could help me, find another way, and a better understanding. I saw somewhere somekind of old radio that reads RFID and records everything ex. listening to a phone and get the voicemail code through RFID, recording the DIP codes etc. What is that ?
Intermec ?
Here is the link for Intermec RFID readers
This plugs in to their 700 Model ( which also supports bar code and Cell GSRM Band), This connects via IR to the device so we may be able to use the SDK and connect to the Touch Pro.
http://www.onesource.intermec.com/products/rfid2_ip4/index.aspx
Send me a PM and I can get s general idea of what you are trying to acomplish...
ronin said:
Now for IR. the device has an IR port.
Click to expand...
Click to collapse
Ok, this is driving me nuts.
Could you please tell me in simple, layman's terms *exactly* where the IR port is located on a CDMA Touch Pro? I can't find anything that looks like a window.
Why not mod the garage door rather than the TP?
ronin said:
I have worked with a lot of RFID and IR devices. The simple answer about this phone it is not RFID capable.
Now for IR. the device has an IR port. But it does not have enough wave strengh to broadcast at distances longer than 3 to 5 feet. So in order to do what you want we would need to replace the IR Sensor,Get additional power and write the code to interface with the device and OS. All these mods would void the warranty on the device and make it cost prohibitive, but if you got time and lot's of money it is a cool project.
WinCe soft has created some remote software for TV and DVRs.
http://classic.pocketgear.com/software_detail.asp?id=22506&associateid=17
Also you can take a look at:
http://www.microsoft.com/windowsembedded/en-us/campaigns/fastertomarket.aspx?WT.srch=1
and see if someone has a device with the capabilities you are looking for.
Click to expand...
Click to collapse
Maybe instead of modding the TP, you could find a suitable module to convert your garage door to Bluetooth. Just a thought, but it would save you having to void the warranty on your TP.
mstevens said:
Ok, this is driving me nuts.
Could you please tell me in simple, layman's terms *exactly* where the IR port is located on a CDMA Touch Pro? I can't find anything that looks like a window.
Click to expand...
Click to collapse
CDMA Touch Pro does not have IR port...
the Iphone works with an DSRL Remote app. I have an HTC HD2 and it works with winmobile 6 and with android now. Does somebody know an app which works on android or winmobile 6 like the DSRL Remote camcorder app ?
Greeting from Germany
Carsten
been thinking of that for some time now, would LOVE that. But I read somewhere that it may be a problem to use the USB port as host...
http://www.gphoto.org/ ?
i recently found out that it is possible to do this with a nintendo ds but it requires some DIY work or paying someone to do this for you, surprisingly even in germany there seem to be some people building these.
my uncle bought one of these cables/modules for his canon 5dmk2 a few weeks ago. since i got my hands on it I thought about how awesome such a feature would be (preferably wireless) on an a phone.
I would love something like that! An android phone would make the holy grail of dSLR remote controls. Time intervals, exposure settings, super-smooth HDRI with bracketing of multiple photos, live view, hell even motion activated shooting (figure out a way to detect motion from image through the live view and trigger a shutter release every time that happens).
Anyone up for this?! I'll be getting both my SGS and 5DMKII in about a month, super willing to beta-test
I'd love this too for Nikon Devices!
minus30 said:
I'd love this too for Nikon Devices!
Click to expand...
Click to collapse
It is possible. Only drawback is that a laptop is needed like with the iphone app.
So a possible setup would be like this:
Camera <-> USB cable <-> Laptop running Linux <-> WLAN/Edge/3G <-> Android
The only big dislike is the laptop in that chain
klaus27 said:
It is possible. Only drawback is that a laptop is needed like with the iphone app.
So a possible setup would be like this:
Camera <-> USB cable <-> Laptop running Linux <-> WLAN/Edge/3G <-> Android
The only big dislike is the laptop in that chain
Click to expand...
Click to collapse
It's the same setup used for the iPhone, it's basically a remote control setup and I can't really see how it helps that much, it feels like more of a gimmick rather than something helpful since you still need to carry a laptop with you.
Now, if the camera could be directly connected to the phone, that'd be awesome, since you pretty much carry a phone with you at all times.
zeusalmighty said:
It's the same setup used for the iPhone, it's basically a remote control setup and I can't really see how it helps that much, it feels like more of a gimmick rather than something helpful since you still need to carry a laptop with you.
Now, if the camera could be directly connected to the phone, that'd be awesome, since you pretty much carry a phone with you at all times.
Click to expand...
Click to collapse
That's the point. It is not possible... well, everything is, but the effort cannot be worth the outcome.
It is more likely to do it with an Arduino board with Wlan chip and USB host.
But then again, you have to reverse engineer the Nikon and Canon protocols or use the linux library.... Should be possible, but you need to buy some hardware anyway.
Check this:
http://webcache.googleusercontent.c...h/gphoto/remote.html&cd=1&hl=de&ct=clnk&gl=de
Cheap plug-computers like sheevaplug or this one: http://www.ionicsplug.com/cumulus.html would make it kind of easy as they run linux, have USB connector(s) and have WLAN (sheevaplug needs USB WLAN stick).
Cross-compiling gphoto library, writing a software which talks through gphoto to the cam and report the capabilities back to the connected Android / Iphone.
Only (major) drawback is that those plug computers need a power supply. I have seen someone running sheevaplug with solar panel .
Sheevaplug is around 75€, so quite affordable.
I need to connect my 5DM2 and check whether things like touch-focus, live preview and stuff would be possible...
What do you think about the power plug issue?
Hehe, I like how you assumed that I can understand these things I dont
At work atm but will try to read through the article, but as I understand so far, this guy uses a small linux computer that can communicate through a WLAN adapter so you basically have a wifi remote control. Looks pretty darn cool, especially for the money, and using a solar panel would be awesome!
Only thing is that it doesn't have that much to do with android as far as I can tell, if it's a web interface then you can use it with any device, right?
What I was thinking was more in the likes of a replacement for the $100+ timer triggers with your phone. I think it should be possible but maybe people wouldn't invest in it (though I think they should).
BTW, I just remembered that you can also trigger the camera through the headphone jack, as with those diy remote releases. Do you think there could be a way to use the SGS headphone jack to cause shutter releases? You wouldn't get any control of the settings from the phone, but you could still program time intervals or bulb shots! Hey, even motion sensing shots, provided you dock your phone some place. And you have to admit it doesn't sound too difficult, right?
See the diy thing here: http://www.instructables.com/id/Rem...or-Canon-Cameras/step2/Cut-off-the-ear-peice/
If/when someone does make something like this, I would think a small netbook would be sufficiently portable, compared to a 15" or 17" laptop, to use as the "host" device.
zeusalmighty said:
Hehe, I like how you assumed that I can understand these things I dont
At work atm but will try to read through the article, but as I understand so far, this guy uses a small linux computer that can communicate through a WLAN adapter so you basically have a wifi remote control. Looks pretty darn cool, especially for the money, and using a solar panel would be awesome!
Only thing is that it doesn't have that much to do with android as far as I can tell, if it's a web interface then you can use it with any device, right?
What I was thinking was more in the likes of a replacement for the $100+ timer triggers with your phone. I think it should be possible but maybe people wouldn't invest in it (though I think they should).
BTW, I just remembered that you can also trigger the camera through the headphone jack, as with those diy remote releases. Do you think there could be a way to use the SGS headphone jack to cause shutter releases? You wouldn't get any control of the settings from the phone, but you could still program time intervals or bulb shots! Hey, even motion sensing shots, provided you dock your phone some place. And you have to admit it doesn't sound too difficult, right?
See the diy thing here: http://www.instructables.com/id/Rem...or-Canon-Cameras/step2/Cut-off-the-ear-peice/
Click to expand...
Click to collapse
I see. The thing is there are ready to use solutions out there which do exactly what you are requesting.
My approach was a different one. I wanted to be able to mount the camera somewhere, connect sheevaplug, then go somewhere and remotely control the camera in every aspect. Imaging you have to shoot a marriage. You could place the camera somewhere, take a seat somewhere and see exactly the live-view image from the camera, can point somewhere on the touchscreen to focus on that point, control exposure settings and hit the button to take the shot.
That was my approach. If I would be able to achieve this just with a sheevaplug computer for 75€, that would be great. But there still is the issue with the power necessary to run the computer.
Another problem would be to gain the time needed to write the app. I am able to do that, but time is rare...
I can understand the appeal, as I said it would be awesome to have such a setup, just not for me so far. I'll try to understand how the shutter release works through the remote and report here, i think the headphone jack would be really nice considering that no amount of extra equipment would be necessary, apart from the cable.
Just a quick question, why would you require any coding on the phone, why not use a VNC-like application and install the official canon application on windows?
zeusalmighty said:
I can understand the appeal, as I said it would be awesome to have such a setup, just not for me so far. I'll try to understand how the shutter release works through the remote and report here, i think the headphone jack would be really nice considering that no amount of extra equipment would be necessary, apart from the cable.
Just a quick question, why would you require any coding on the phone, why not use a VNC-like application and install the official canon application on windows?
Click to expand...
Click to collapse
have you ever tried to watch a movie through a VNC connection?
Sheevaplug is driven by a Marvell ARM CPU, no x86 which would be needed by Windows. So only possible way would be to install linux with virtualization, setup windows XP in a container, install EOS software and a VNC server, then use a crappy VNC client on Android to control my camera? Sounds like a crappy setup to me
Having a small, slick and performant native UI would be muuuuuuch better.
I personally don't think that you will succeed with this headphone jack thingie. But I wish you good luck
Hehe, thanks
Good luck with ur project.
Lookie what I just found...
Googling aroud on more general terms for this topic, i found someone pointing to libgPhoto, a multi platform camera control lib: *crap, cannot post links, wtf*
*edit* google for libGphoto, it also has a remote.
Looking a bit further, i came across this:
google for : gitorious agphoto2 commits / master
Now i haven't found any more info on the project yet, but this looks like a project that some of us here on XDA could maybe join in on.. The only problem that then remains is the usb-usb cable There's an actual start on porting an existing lib available!
Just to keep this discussion running (I am not a programmer).
Take a look at:
http://www.mail-archive.com/[email protected]/msg00321.html They are making progress on a workable solution...
klaus27 said:
I see. The thing is there are ready to use solutions out there which do exactly what you are requesting.
My approach was a different one. I wanted to be able to mount the camera somewhere, connect sheevaplug, then go somewhere and remotely control the camera in every aspect. Imaging you have to shoot a marriage. You could place the camera somewhere, take a seat somewhere and see exactly the live-view image from the camera, can point somewhere on the touchscreen to focus on that point, control exposure settings and hit the button to take the shot.
That was my approach. If I would be able to achieve this just with a sheevaplug computer for 75€, that would be great. But there still is the issue with the power necessary to run the computer.
Another problem would be to gain the time needed to write the app. I am able to do that, but time is rare...
Click to expand...
Click to collapse
You just want cash
I'm in for this and would pay for software like this. I even got time for programming but cant do this alone. Just got my nikon D5000
Revisit: Direct Tether for xoom?
With all of our marvelous hacking friends, I don't see why we couldn't expect direct tethering for a DSLR on Xoom or other tabs with usb capabilities.
TheZuneLune said:
With all of our marvelous hacking friends, I don't see why we couldn't expect direct tethering for a DSLR on Xoom or other tabs with usb capabilities.
Click to expand...
Click to collapse
I am teaching myself how to use my DSLR, and I begin thinking... "Wow, a lot of these settings could be a lot easier and more intuitive to control... why isn't there a DSLR powered by Android?"
Anyway, I found this thread and I figured I'd post my Xoom hooked up to my Canon. ..Not that either recognizes the other.
If someone could find a way to make this thing able to do the directv rvu mode, then I would buy one for every room in my house.
For those who dont know, rvu is the new way a single dtv dvr will communicate with up to 6 (i think) remote boxes to distribute live tv and recorded content. some of the new samsung smart tvs have this feature integrated already.
just throwin this out there
any one have any thoughts on this?
I forgot to mention, the main reason i am asking this here is since i thought the samsung smart tvs have some android functionality.
sounds cool
i thought it would be cool since none of my tvs have good speakers, so this could be a one piece solution for sound, satellite and streaming in rooms other than the main tv room. someone should tell google this.lol