A friend of mine has an ATT Titan (phone says PI39100) with a cracked front glass. I was looking to purchase a new front lens/digitizer for her phone and do the replacement. Most of what I find online are for the x310e.
Long question short: is the front lens for the x310e the same exact one as for the PI39100? or are the two not compatible?
Also, if someone can point to a DIY for doing this I'd appreciate it - otherwise, i'll take on it the same as the Galaxy Tab 10.1 I did earlier this week (using a hair dryer and an exacto knife) I would like to at least know the lens is the same so I can order soon.
Thanks in advance.
The screens are the same. The only difference will be that the new screen will have the HTC-Brand name instead of AT&T. Is it just the glass cover that's broken or is the whole touch screen? You can either replace just the glass cover or the entire touch screen. At least that is what I understand because I've seen both parts offered separately.
Regarding the DIY replacement have a look here:
http://forum.xda-developers.com/showthread.php?t=1569714
Hope this helps.
malvo26 said:
The screens are the same. The only difference will be that the new screen will have the HTC-Brand name instead of AT&T. Is it just the glass cover that's broken or is the whole touch screen? You can either replace just the glass cover or the entire touch screen. At least that is what I understand because I've seen both parts offered separately.
Regarding the DIY replacement have a look here:
http://forum.xda-developers.com/showthread.php?t=1569714
Hope this helps.
Click to expand...
Click to collapse
Excellent. This is EXACTLY what I was looking for. Thank you VERY much for your assistance
Oh, and it's the glass cover that's broken, because she's still able to (and currently continues to) use the phone. On ebay, I've seen the glass and digitizer going for under $30 shipped, so I think it's reasonable enough.
Thanks again. :good:
Glad to help. That's we are all here for: help each other.
Hey all,
Unfortunately my phone dropped, it had a case (not a full one) and the glass shattered.
Screen and digitizer are working fine.
Does someone was able to only replace the glass+digitizer on this phone?
i have looked for a video/procedure but couldn't find one for the DNA. (Video anyone?)
I'm about to order the part but I am not sure if I should go for the digitizer only (50$) or for the LCD + digitizer (160$).
I have all the hand tools and the "hands" I'm just not sure if it is possible.
Disassembly
http://m.youtube.com/watch?v=z8BJVchUlTs
Assembly
http://m.youtube.com/watch?v=7St2hw_mqVQ
Thx but I already saw it. it doesn'y show how to take only the glass apart.
vemplord said:
Hey all,
Unfortunately my phone dropped, it had a case (not a full one) and the glass shattered.
Screen and digitizer are working fine.
Does someone was able to only replace the glass+digitizer on this phone?
i have looked for a video/procedure but couldn't find one for the DNA. (Video anyone?)
I'm about to order the part but I am not sure if I should go for the digitizer only (50$) or for the LCD + digitizer (160$).
I have all the hand tools and the "hands" I'm just not sure if it is possible.
Click to expand...
Click to collapse
Why not just have htc replace? They do a good job....
In my experience, No. It is VERY VERY hard to separate the LCD and the digitizer. I was not successful on my first attempt and it ended up costing me double because I had to buy an entire front section, which is pricy. If you want to take a shot at it, I still have an HTC oem digitizer thats sitting here collecting dust. PM me.
tucstwo said:
In my experience, No. It is VERY VERY hard to separate the LCD and the digitizer. I was not successful on my first attempt and it ended up costing me double because I had to buy an entire front section, which is pricy. If you want to take a shot at it, I still have an HTC oem digitizer thats sitting here collecting dust. PM me.
Click to expand...
Click to collapse
Thanks for the offer.
I decided to take it to a repair shop in Cambridge, MA,
They said they can replace the glass only for 120$.
Where did you repair it eventually? How much did you pay for entire front section?
Guys,
Today I dropped my DX (so much to say about Friday the 13th...)
You can see it in the attached picture. I just wanted to ask, will the following replacement work:
http://www.ebay.de/itm/HTC-Desire-X...AU_MobilePhoneAccessories&hash=item20d2dca972
Thank you in advance!
Few weeks ago, I dropped my DX too, although damage was less. I read about digitizer replacement on HTC devices (in general) and I read it's not that easy as on Samsung devices. One guy tried to replace digitizer and he ended up with broken LCD panel. You can also buy whole module (LCD screen + digitizer) but it's like a roll of a dice - you can get good lcd and you can get bad lcd too. It's a risk. You can send it to local repair centre. I was told it would cost about 100-120€. From then, I knew, I have to live with that broken screen. lol
Found something different:
http://www.parts4repair.com/complete-screen-assembly-with-lgp-for-htc-desire-x-t328e/
Does anybody have experience with that shop? The price is ok, I would even order a new back cover there (because mine is a bit broken, too).
Hard to replace
I've tried to replace the touch screen (only the glass). In eBay it's about 25$ or something like that.
It hard, very hard to replace. I've ended with a broken LCD, because when try to separate the glass from LCD, LCD broke.
For me, it's better to replace the whole screen, not only the glass. I've seen it for 51$ in eBay, but worth it.
Video on how to replace (as you can see, you need a dryer, and big ball, because phone gets VERY hot, and you're the whole time thinking you're going to melt it
.you*tube*.co*m/*watch?v=hzRsLDahWVg
I won't try to replace only the glass, because my lcd is already broken. So I'll replace whole display unit (see link above for shopping details). Video on how to replace just the whole screen assembly can be found here: https://www.youtube.com/watch?v=hzRsLDahWVg
Good news guys... My package arrived in Germany, so soon I will be able to replace my screen and get my DX working again...
I have a Problem
I didnt drop my xtouch but its touchscreen isnt working at the corners HELLLPPPP
WHAT TO DO?
Anybody knows a reliable source for a new lcd + digitizer module for desire X?
kisbatyu75 said:
Anybody knows a reliable source for a new lcd + digitizer module for desire X?
Click to expand...
Click to collapse
Look a few posts above, my post #3 contains a link (that's the shop I used, lcd + digitizer are stil working well).
Firday the 13th... aaaand I dropped my Desire X smack on the corner, leaving me with a nice mosaic of cracks all over.
Thanks for the provided links. Guess I have some tinkering ahead of me....
help
after i replaced removed the digitizer and put it back it not sticking ...
i cleaned it using glass cleaner also ...!!
[email protected] said:
after i replaced removed the digitizer and put it back it not sticking ...
i cleaned it using glass cleaner also ...!!
Click to expand...
Click to collapse
Did you remove the digitizer from the lcd? If yes, I actually don't know what to do; but I used a complete assembly of lcd and digitizer as replacement. It's sticking at the four corners, at least for me.
Its is sticking but slight gap near the ui keys .....
I think there is dust between the screen and the digitizer
Sent from my HTC Desire X
hi help
can i use this
http://www.ebay.in/itm/121348746163?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
or
http://www.ebay.in/itm/151326952917?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
to stick the glass back
which is better to buy
please some one tell fast
Hi all.I have the at&t htc one x + and the back camera lens gets scratched very easily. i bought the oem casing on Etradesupply costed me around $25. Again i can see some scratches. I the question is can i put on the international ONE X + housing since its camera lens covers can be changed , unlike the at&t versions. I know at&t is Lte and might have some issues, but would someone care to explain if its possible?
Thank you.
So somehow I broke the glass over the camera. Does anyone know how difficult it is to change it. I was going to exchange it for a refurb model with the htc program but i've rooted and s-off'ed it