Hello, I have a problem with lenovo s660. I try put rom from A880. I put in mobile with flashtool and everything was good and
I got green circle. Now I try turn phone on but nothing happend . I connect phone back to pc and try to format all, but phone
did not want to connect to pc. Please what to do mobile is dual sim, chinese version (not russian)? Sorry about bad engilsh.
Thank you.
Daniel318 said:
Hello, I have a problem with lenovo s660. I try put rom from A880. I put in mobile with flashtool and everything was good and
I got green circle. Now I try turn phone on but nothing happend . I connect phone back to pc and try to format all, but phone
did not want to connect to pc. Please what to do mobile is dual sim, chinese version (not russian)? Sorry about bad engilsh.
Thank you.
Click to expand...
Click to collapse
Hardbricked.
Befire you can simply putting any rom should u require to make sure it compatible to your phone. If u die hard wanted to have a custom rom but no such option for your phone,sell it and find phone can be custom. I cant help you but from my thought its bricked.
Please help me with lenovo s660w china firmware, based on mtk 6582
Related
hello everyone,
i started rooting my X10,
i followed the instructions in step one, started my x10 in flashmood, pressed enter and the screen began to show messages then when it finished i unpluged my mobile from usb cable and tried to start it but it did not start . i removed the battery , put it again and tried to start it but again it did not start
did everything but the mobile is not responding to anything
even i tried to install a new software but the pc does not identify the mobile anymore, please helpppppppppppppp
is my mobile hardware got burned or is there anything i can do, please
Normally the phone does not get burned! (i don't know anyone who bricked his phone)!
So please try to take out the battery for a least one minute and try to flash via SEUS on another USB-Port!
Regards
Bin4ry
i will try this solution,
thx Bin
Bin4ry said:
Normally the phone does not get burned! (i don't know anyone who bricked his phone)!
So please try to take out the battery for a least one minute and try to flash via SEUS on another USB-Port!
Regards
Bin4ry
Click to expand...
Click to collapse
by this , do u mean Sony Ericsson PC companion ? cuz the main problem is still the same, the pc does not identify that there is a mobile connected via USB port so how can i flash it?
firstly you dont mean rooting do you - rooting doesnt require flashing
you're installing bin4ry's 2.1 rom ?
you will need flash mode to do this so im sure you know how to do it.
if you still cant get the x10 to boot back up, make sure it's got plenty of charge then use SEUS to Repair it - you should still be able to get into flash mode to do this
all of this is not working, i think i might got a virus while using seus or the hardware got a problem
I has a problem with my phone. For solve it I download a rom from pandawillforum and after flashing it the phone was bricked. The phone is not detected for the pc and I don't know if I can do something for unbricked it.
The post of pandawill is titled " [ROM]Multilanguge rom for GT-I9300 MTK6577 sku35701 & sku33771".
Thank you
feli501 said:
I has a problem with my phone. For solve it I download a rom from pandawillforum and after flashing it the phone was bricked. The phone is not detected for the pc and I don't know if I can do something for unbricked it.
The post of pandawill is titled " [ROM]Multilanguge rom for GT-I9300 MTK6577 sku35701 & sku33771".
Thank you
Click to expand...
Click to collapse
Hi, just to be sure if it's totally bricked, please check if the device manager of your computer detected your phone when you connect to it.
What is your phone model? Just asking this because there's FAKE Samsung Galaxy S3 GT-I9300 out there so we know where we should start.
omnuaz soldier
pizzaboydee said:
Hi, just to be sure if it's totally bricked, please check if the device manager of your computer detected your phone when you connect to it.
What is your phone model? Just asking this because there's out there so we know where we should start.
Click to expand...
Click to collapse
Yes, its totally bricked. The device manager doesn't detect the phone. My phone is model GT-N9300+ SSN:N9300+GSMH, I think that is a Feiteng.
Hi, I have Micromax Doodle 2 Phone which I rooted and then while installing Chainfire3d, there was a message saying 'if the device does not boot, you may need to flash ROM'
and like it said, my device got stuck on reboot.
I have no clue what to do.. The phone does not have a SD Card slot. and I don't know how to copy ROM files into the drive.
Please help.
Aneelneupane said:
Hi, I have Micromax Doodle 2 Phone which I rooted and then while installing Chainfire3d, there was a message saying 'if the device does not boot, you may need to flash ROM'
and like it said, my device got stuck on reboot.
I have no clue what to do.. The phone does not have a SD Card slot. and I don't know how to copy ROM files into the drive.
Please help.
Click to expand...
Click to collapse
do you have doodle 2 stock Rom or nandroid backup ?
is your pc detecting your phone ?
is there something like a pc suite for micromax devices to update phones ?
if none of the above works then you should probably give your phone to a micromax service centre.
if your phone is under warranty,they will do it for free !
flash stock rom via sp flash tools. install necessary drivers for your phone on your pc.
smz2014 said:
do you have doodle 2 stock Rom or nandroid backup ?
is your pc detecting your phone ?
is there something like a pc suite for micromax devices to update phones ?
if none of the above works then you should probably give your phone to a micromax service centre.
if your phone is under warranty,they will do it for free !
Click to expand...
Click to collapse
My PC was not detecting the Phone and I could not go to 'fastboot mode' as well..
But I went to the service center and they replaced my phone since It was just few days old. :laugh:
I have one more query,
Is it possible to install Paranoid Android ROM on this phone (doodle 2)
I really want to try it but I'm afraid I'll brick the phone again.
Thanks a lot for response.
Aneelneupane said:
My PC was not detecting the Phone and I could not go to 'fastboot mode' as well..
But I went to the service center and they replaced my phone since It was just few days old. :laugh:
I have one more query,
Is it possible to install Paranoid Android ROM on this phone (doodle 2)
I really want to try it but I'm afraid I'll brick the phone again.
Thanks a lot for response.
Click to expand...
Click to collapse
i dont know about paranoid android for your device.
i cannot find a device section for doodle 2
Hello Guys !
I have Qmobile Z10 which is same as Micromax 5 e481 ,Wiko Fever & Blu Life One X
I have flashed Wiko Fever Stock Rom on my Qmob Z10 which was done through official wiko software and it worked flawlessly , then i decided after few days to go back to previous offical Qmob Z10 Rom , i found some several same links , but it was supposed to be flashed via sp flash tool cause its MTK 6753 device ... So i downloaded that and load scatter file and everything and i flashed it and it flashed 100% successfully but after it was completed i unplug the usb cable and try to on my device but nothing appears at all (Hard Bricked i guess) but still i get my device led light on when i plug usb cable with it and it is recognized by computer and sp flash tool and i can reflash it again , but im unable to find any solution that why official stock rom made it bricked
If any moderators or any one share their opinion or way of help that would be really appreciated
Charge the phone for a couple minutes then reflash the stock using spflash tools. After turn it on while charging and/or try while unplugged.
This happened to my blu when I restored to a previous backup using twrp 3.0
Sent from my BLU LIFE ONE X using XDA-Developers mobile app
I have same issue can anyone help me to recover my mobile qmobile Z10. I have flashed weko fever rom but it is not recognize my sims so i decided to revert back orignal stock rom but when i refleshed stock rom my cel phone got bricked and unable to switched on now. I have try everything to recover my cell phone but unable. Plz anyone help me please what can i do now to recover my bricked phone back to its original state.
m.haseebhaider said:
I have same issue can anyone help me to recover my mobile qmobile Z10. I have flashed weko fever rom but it is not recognize my sims so i decided to revert back orignal stock rom but when i refleshed stock rom my cel phone got bricked and unable to switched on now. I have try everything to recover my cell phone but unable. Plz anyone help me please what can i do now to recover my bricked phone back to its original state.
Click to expand...
Click to collapse
Can u flash with spflash?
Teblakuda4o4 said:
Can u flash with spflash?
Click to expand...
Click to collapse
Yes bro lot of time i re flashed using SP tool but on my cell phone only red light on when i connect USB cable and nothing else showing.
m.haseebhaider said:
Yes bro lot of time i re flashed using SP tool but on my cell phone only red light on when i connect USB cable and nothing else showing.
Click to expand...
Click to collapse
Try doing a manual format in the format tab of spflash, then Downloading the firmware to your phone. See if that works. If that doesn't work, try another similar phones firmware.
My Blu life one x did the same thing and I flashed it with the wiko fever firmware, then manually formatted and downloaded the Blu firmware to it and it finally worked.
Hope it works out for you.
PS- Never flash the bootloader
Hello everyone on the forum.
I tried to recover a Nubia nx513j that was stuck on boot but when trying to install a ROM I made a mistake and chose the wrong one. Now the phone not even starts (no signal at all, no charge, etc) but is recognizer by the computer when connecting with USB cable.
Can I try to do something to recover it?
Please help me!!
machsantos said:
Hello everyone on the forum.
I tried to recover a Nubia nx513j that was stuck on boot but when trying to install a ROM I made a mistake and chose the wrong one. Now the phone not even starts (no signal at all, no charge, etc) but is recognizer by the computer when connecting with USB cable.
Can I try to do something to recover it?
Please help me!!
Click to expand...
Click to collapse
if u can't enter the recovery or download mode then unfortunately it got broken and u need to send it to a service center