Hello everyone on the forum.
I tried to recover a Nubia nx513j that was stuck on boot but when trying to install a ROM I made a mistake and chose the wrong one. Now the phone not even starts (no signal at all, no charge, etc) but is recognizer by the computer when connecting with USB cable.
Can I try to do something to recover it?
Please help me!!
machsantos said:
Hello everyone on the forum.
I tried to recover a Nubia nx513j that was stuck on boot but when trying to install a ROM I made a mistake and chose the wrong one. Now the phone not even starts (no signal at all, no charge, etc) but is recognizer by the computer when connecting with USB cable.
Can I try to do something to recover it?
Please help me!!
Click to expand...
Click to collapse
if u can't enter the recovery or download mode then unfortunately it got broken and u need to send it to a service center
Related
I wanted to install the ClockworkMod and have inadvertently selected the wrong then the phone had been Hongen and now it will not boot, only a black screen and no recovery mode can any help myyyyyyyyyy ?
leinad1313 said:
I wanted to install the ClockworkMod and have inadvertently selected the wrong then the phone had been Hongen and now it will not boot, only a black screen and no recovery mode can any help myyyyyyyyyy ?
Click to expand...
Click to collapse
I have had the same thing by the same procedure to unlock bootloader and flash cwm ... :crying: :crying: :crying: help us
Try this: http://forum.xda-developers.com/showpost.php?p=36688645&postcount=808
PS.: If you can't get your phone in emergency mode (step 5) you can put in download mode instead. To get it in download mode press and hold volume down and up while you connect your usb cable to your pc
the phone does not go into any recovery mode (emergency) indeed, the PC recognizes it as USB\VID_05C6&PID_9008&REV_0000
Yet another brick. There should be a counter for this.
How do I reset the counter?
the samsung is reset with a simple jig... and lg phones?
same problem
mejinn said:
How do I reset the counter?
the samsung is reset with a simple jig... and lg phones?
Click to expand...
Click to collapse
I have the same problem... any idea?
thanks
mejinn said:
I have had the same thing by the same procedure to unlock bootloader and flash cwm ... :crying: :crying: :crying: help us
Click to expand...
Click to collapse
same problem ... on l7 ( does anyone unbrick his phone?
Flash the stock firmware
Sent from my LG-P880 using xda premium
No solution to this problem
I've tried everything.
The phone simply doesn't connect.
USB\VID_05C6&PID_9008&REV_0000
This is what I get when I connect the phone by USB.
I just cant get into emergency, DIAG or emergency CS
KDZ the phone connects and then I get a message afterwards PHONE NOT FOUND.
everytime I install the drivers by LG support tool, it keeps giving me the option to install the driver, like I havent done it a hundred times over.
I think there should be a driver somewhere that can be installed but the only people that have this driver are LG tech's. So they can bill you after
send the phone in cause you rooted it. So the one billion dollar question is witch hero will find a way to unbrick this device. We only need a way
to get a driver to install and we are home free. Or maybe the only other option is throwing the phone for sale on internet for spare parts:cyclops:
HELP PLEASE HELP find a way to unbrick this phone. Believe me I flashed and bricked alot of different phones and there was a way out but in
with this phone it seems impossible!!
---------- Post added at 04:02 PM ---------- Previous post was at 03:46 PM ----------
breakercris said:
I've tried everything.
The phone simply doesn't connect.
USB\VID_05C6&PID_9008&REV_0000
This is what I get when I connect the phone by USB.
I just cant get into emergency, DIAG or emergency CS
KDZ the phone connects and then I get a message afterwards PHONE NOT FOUND.
everytime I install the drivers by LG support tool, it keeps giving me the option to install the driver, like I havent done it a hundred times over.
I think there should be a driver somewhere that can be installed but the only people that have this driver are LG tech's. So they can bill you after
send the phone in cause you rooted it. So the one billion dollar question is witch hero will find a way to unbrick this device. We only need a way
to get a driver to install and we are home free. Or maybe the only other option is throwing the phone for sale on internet for spare parts:cyclops:
HELP PLEASE HELP find a way to unbrick this phone. Believe me I flashed and bricked alot of different phones and there was a way out but in
with this phone it seems impossible!!
Click to expand...
Click to collapse
And there is no mode to put it in in because te volume buttons don't do crap, the home button also, the only time that the phone does show up is when windows tells me it has an unknown device that I for the love of god can't find a driver for. I tried SDK, the LG drivers, but no dice:crying::crying::crying::crying::crying:
Sony st23i
Same chases with me, on my phone sony st23i, please help me, can anybody give me link for this chases???
Hello,
I have Jiayu G3 which is bricked, it is completely dead, cannot power on, no charging, no recovery....
so i need help please, i also tried this: With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds.
but this is not working because my pc does not detects it....
so please i need other solution or how to find test points on Jiayu g3 ?
thank you !!!
chief_wolfinjo said:
Hello,
I have Jiayu G3 which is bricked, it is completely dead, cannot power on, no charging, no recovery....
so i need help please, i also tried this: With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds.
but this is not working because my pc does not detects it....
so please i need other solution or how to find test points on Jiayu g3 ?
thank you !!!
Click to expand...
Click to collapse
hi how did you brick your G3?
mine is semi-brick, I was updating Lewa OTA then when iot rebooted the screen was like just snow on a TV Set
I took out the battery then now it just stays at the Lewa Logo.
I'm trying SP flash method but still no go
give this a shot
https://plus.google.com/113031144280405994468/posts/Td1SNjjZWaN
http://forum.xda-developers.com/showthread.php?t=1943442
mengfei said:
hi how did you brick your G3?
mine is semi-brick, I was updating Lewa OTA then when iot rebooted the screen was like just snow on a TV Set
I took out the battery then now it just stays at the Lewa Logo.
I'm trying SP flash method but still no go
give this a shot
https://plus.google.com/113031144280405994468/posts/Td1SNjjZWaN
http://forum.xda-developers.com/showthread.php?t=1943442
Click to expand...
Click to collapse
Hi
thank you for the reply, but this unfortunately did not help, my G3 just wont power up
maybe with test points it will power up... but i dont which one to use on motherboard
thank you
chief_wolfinjo said:
Hi
thank you for the reply, but this unfortunately did not help, my G3 just wont power up
maybe with test points it will power up... but i dont which one to use on motherboard
thank you
Click to expand...
Click to collapse
try SP Flash method that needs NO battery
http://techideki.com/how-to-root-jiayu-g3-working-recovery-mode/
http://vondroid.com/threads/cwm-recovery-jiayu-g3.4837/
http://androidunbricked.blogspot.com/2013/06/unbrick-your-mtk6577-android-mobile.html
just got my G3 up & running again via SP Flashtool, important thing is that you must have the drivers installed
http://www.needrom.com/tutorial-mt657x-flashing/
mengfei said:
just got my G3 up & running again via SP Flashtool, important thing is that you must have the drivers installed
http://www.needrom.com/tutorial-mt657x-flashing/
Click to expand...
Click to collapse
thank you
I will try that today when i come home.
otherwise Do you know which test points will power up ?
Hi I have the Jiayu g3s which is the quad core variant. I have my phone too but it boots up and goes until the boot logo where it freezes please help
revive JIAYU G3S(G3T)
I BRICKED MY PHONE USING A ROM NOT PROPER FOR MY DEVICE JIAYU G3S(G3T). AFTER THIS, THE PHONE WON'T CHARGE, WON'T START, IT WAS DEAD. BUT AFTER HOURS SPENT SERCHING ON THE INTERNET, I WAS ALLOWED TO FIND WHAT I NEEDED TO REVIVE MY PHONE: ROM "JY-G3-20130523-102107" UNDER "SP_Flash_Tool_v3.1332.0.187". IN WINXP AFTER INSTALLING DRIVERS, MY DEVICE WAS DETECTABLE WHEN I PLUG IT, WITH NO BATTERY IN "SP_Flash_Tool_v3.1332.0.187" , SCATTER - LOADING PUT/MOUNT THE FILE FROM ROM "JY-G3-20130523-102107" NAMED "MT6589_Android_scatter_emmc" AND HIT "FIRMWARE->UPGRADE" CONNECT THE PHONE TO PC WITH NO BATTERY AND PUSH NOT FOR LONG, POWER BUTTON AND VOLUME MINUS/DOWN. AFTER THAT THE PROCESS OF RESTORE THE SOFT IN THE PHONE IT SHOULD STARTING. THANKS TO ANYONE WHO POSTED THE SOFTWARE NEEDED. FOR A FEW DAYS HERE IS A DOWNLOAD LINK
don't forget to add (point) .html at the end
fastupload.rol.ro/8d37335019a3fa55a5decead42e8b667
there is a official rom on this page:
www.talkingmobi.com/rom-download-2/rom-download-2013-may-2014/
scroll through it there are many roms but it is there.
you can also find the flashing guide and tools to download you need to reply to the posts there to see the links i know it is a odd restriction and also no right clicking is allowed
used that to fix my bricked Jiayu G3T and it worked
good luck
Hi everyone! I'm asking a desperate help to solve a problem about recovery an almost bricked Huawei G610S-U00.
I tell you the story...
Few days ago I've tried to flash the original firmware of this device with the SP Flash Tool. The firmware has been downloaded from another forum.
The flash procedure ends successfully but when I've tried to reboot the phone it powers on correctly but the screen remain black. I can say it turn on correctly because you can see the back ligth of the screen and you also che feel the vibration pushing the power on button.
Now I think that the problem is due to an wrong scatter file or a wrong firmware version.
Now the situation is that the phone turns on and is recognized by the SP Flash Tool and I can do flashing operations but I need the correct files to flash.
Can anyone help me in this situation?
I really thank everyone could help!
Thank you very much
andbrigo said:
Hi everyone! I'm asking a desperate help to solve a problem about recovery an almost bricked Huawei G610S-U00.
I tell you the story...
Few days ago I've tried to flash the original firmware of this device with the SP Flash Tool. The firmware has been downloaded from another forum.
The flash procedure ends successfully but when I've tried to reboot the phone it powers on correctly but the screen remain black. I can say it turn on correctly because you can see the back ligth of the screen and you also che feel the vibration pushing the power on button.
Now I think that the problem is due to an wrong scatter file or a wrong firmware version.
Now the situation is that the phone turns on and is recognized by the SP Flash Tool and I can do flashing operations but I need the correct files to flash.
Can anyone help me in this situation?
I really thank everyone could help!
Thank you very much
Click to expand...
Click to collapse
No one can help?
Same problem here. I've downloaded a rom and flashed via SPFlash tools and I end at black screen. But once connected to usb the phone is recognized by the PC so it can be flashed if I have the right files. So if possible , someone with G610s , please make a whole backup and give us the file so we can flash . Please !
jazzymc said:
Same problem here. I've downloaded a rom and flashed via SPFlash tools and I end at black screen. But once connected to usb the phone is recognized by the PC so it can be flashed if I have the right files. So if possible , someone with G610s , please make a whole backup and give us the file so we can flash . Please !
Click to expand...
Click to collapse
Hi, I've solved the problem using a full backup given me from a friend.
I upload it to a cloud and then I will give you the link.
:good:
Mine is blank as well
andbrigo said:
Hi, I've solved the problem using a full backup given me from a friend.
I upload it to a cloud and then I will give you the link.
:good:
Click to expand...
Click to collapse
Hi bud, i understand it's an old thread but same thing happened to my G610 U00 and the only option i have is a proper rom for sp flashtool, please if you may, upload the link to the one that saved your phone, thanks ahead!
Hello, I have a problem with lenovo s660. I try put rom from A880. I put in mobile with flashtool and everything was good and
I got green circle. Now I try turn phone on but nothing happend . I connect phone back to pc and try to format all, but phone
did not want to connect to pc. Please what to do mobile is dual sim, chinese version (not russian)? Sorry about bad engilsh.
Thank you.
Daniel318 said:
Hello, I have a problem with lenovo s660. I try put rom from A880. I put in mobile with flashtool and everything was good and
I got green circle. Now I try turn phone on but nothing happend . I connect phone back to pc and try to format all, but phone
did not want to connect to pc. Please what to do mobile is dual sim, chinese version (not russian)? Sorry about bad engilsh.
Thank you.
Click to expand...
Click to collapse
Hardbricked.
Befire you can simply putting any rom should u require to make sure it compatible to your phone. If u die hard wanted to have a custom rom but no such option for your phone,sell it and find phone can be custom. I cant help you but from my thought its bricked.
Please help me with lenovo s660w china firmware, based on mtk 6582
Hello. I have flashed my Lenovo Vibe K5, former build A6020a40_S004 to A6020a40_105, hoping for that VoLTE update. Following the proper steps and downloading the Stock ROM Firmware from trusted supplier, my phone won't boot into anything: recovery, or normal. Though the LED lights up when connected to a computer. However, it doesn't appear on my computer or hear that USB chime. I'm using a Windows 10 (which I've seen many have issues with Windows 10 and drivers) running on Bootcamp 6. I appreciate it if you guys could help me. Thank you very much.
By the way, I have no custom recovery installed. Just the basic Android System Recovery <3e> and I'm not that familiar with Android systems.
justinfinity09 said:
Hello. I have flashed my Lenovo Vibe K5, former build A6020a40_S004 to A6020a40_105, hoping for that VoLTE update. Following the proper steps and downloading the Stock ROM Firmware from trusted supplier, my phone won't boot into anything: recovery, or normal. Though the LED lights up when connected to a computer. However, it doesn't appear on my computer or hear that USB chime. I'm using a Windows 10 (which I've seen many have issues with Windows 10 and drivers) running on Bootcamp 6. I appreciate it if you guys could help me. Thank you very much.
By the way, I have no custom recovery installed. Just the basic Android System Recovery <3e> and I'm not that familiar with Android systems.[/Q
Click to expand...
Click to collapse
Well sorry to hear about that but I know very well how to recover from such situation. You'll need to flash the recovery IMG again so that it boots into recovery mode
Brawler leon said:
Well sorry to hear about that but I know very well how to recover from such situation. You'll need to flash the recovery IMG again so that it boots into recovery mode
Click to expand...
Click to collapse
Thanks! Can you tell me how? I've been researching about this as well for a long time now. Any help is appreciated.
Yes my bud. I will provide you the link shortly to some SDK tools so that you can flash your recovery IMG again and et access to recovery mode. I know that situation is chaotic and sucks but I am assuming that you aren't able to access twrp or anything.when you turn the phone on it gets stuck at lenovo and after few minutes it gets restarted on its own. And on connection g it to computer, it just doesn't get connected and nothing appears to be connected. I want you to take the battery out and place it again after few minutes and press the "vol down" button and "power button at the same time. You'll see the same lenovo icon but there will be something written in Chinese or something like that. Now connect your phone to your computer and I advise you to use a very good quality data sharing cable or original lenovo cable. Now your computer will recognise your phone as a hard drive or a storage device.i I'll try to upload a video on that too. Till then try these steps and lemme know if they work and your computer recognises your dead phone.if it does then there is still a hope left. BTW I was stuck in the same situation twice but thank god I saved myself and I am using my device. Note:- this method doesn't uses any software like " QFIL" or "QCOM" loader to flash stock firmware. Hope it works
---------- Post added at 05:30 PM ---------- Previous post was at 05:22 PM ----------
Just keep replying if it works and within a week you'll get your phone fully functional.
Here I have uploaded the platform tools needs d to flash recovery
Brawler leon said:
Here I have uploaded the platform tools needs d to flash recovery
Click to expand...
Click to collapse
Thanks a lot, man. Where the hell have you been all my life? Lol.
So my phone doesn't boot. It doesn't even show the Lenovo logo on it. Just mere darkness. :'(
I am going to Hong Kong later this week (this is where I bought the phone) and I don't know, maybe have someone fix it.
PS. Can you please DM me the links or if it isn't a loss for you you may just reply it here.
Thanks in advance and more power. The world needs more people like you.
Sincerely,
Justin
Sorry for responding late bud.but I am not able to post the link on this thread. If you have any e mail address then tell me so that I can mail you the links. And as you said your phone doesn't boot I want to ask you whether your phone charges when you connect it to the power and charging bar is shown or not. If yes then pls remove your phone battery and put it back and press the power button and the vol. down button hardly .if you see lenovo logo and something written in Chinese or something like that then you're on the way to get your phone back.just reply me the results soon bud
Brawler leon said:
Sorry for responding late bud.but I am not able to post the link on this thread. If you have any e mail address then tell me so that I can mail you the links. And as you said your phone doesn't boot I want to ask you whether your phone charges when you connect it to the power and charging bar is shown or not. If yes then pls remove your phone battery and put it back and press the power button and the vol. down button hardly .if you see lenovo logo and something written in Chinese or something like that then you're on the way to get your phone back.just reply me the results soon bud
Click to expand...
Click to collapse
Hey man. Justin here, again.
You may reach me through "[email protected]".
It doesn't show anything. Though, the LED light illuminates when connected to a power source or laptop. I'm starting to think it's absolutely hopeless. But please do message me anyway.
Fondly,
Justin
I think you have hard bricked your phone but still let's try
Brawler leon said:
I think you have hard bricked your phone but still let's try
Click to expand...
Click to collapse
Sure. I will wait for you in my e-mail. Thanks!
Brawler leon said:
Yes my bud. I will provide you the link shortly to some SDK tools so that you can flash your recovery IMG again and et access to recovery mode. I know that situation is chaotic and sucks but I am assuming that you aren't able to access twrp or anything.when you turn the phone on it gets stuck at lenovo and after few minutes it gets restarted on its own. And on connection g it to computer, it just doesn't get connected and nothing appears to be connected. I want you to take the battery out and place it again after few minutes and press the "vol down" button and "power button at the same time. You'll see the same lenovo icon but there will be something written in Chinese or something like that. Now connect your phone to your computer and I advise you to use a very good quality data sharing cable or original lenovo cable. Now your computer will recognise your phone as a hard drive or a storage device.i I'll try to upload a video on that too. Till then try these steps and lemme know if they work and your computer recognises your dead phone.if it does then there is still a hope left. BTW I was stuck in the same situation twice but thank god I saved myself and I am using my device. Note:- this method doesn't uses any software like " QFIL" or "QCOM" loader to flash stock firmware. Hope it works
Tried removing battery, its still in bootloop.
Click to expand...
Click to collapse