Hi All,
Thank you xda forum, I was searching and learning from you and ppcgeeks all these two days.
My Touch Pro (Bell Mobility) now is always in reboot loop, it only shows white "Touch PRO" in the 1st screen. After around 30 - 40 seconds, reboot again. Neven been rebooted sucessfully.
Here are what I did:
1. originally it should be SPL-0.35 or -0.25 somthing like that, after use Raphael_CDMA_HSPL_037 unlock , well done, it shows 0.37-comex (thanks this forum and authors)
2. use PC to flash a chinese version ROM, says sucessfully 100% done.
BUT after that it was going to reboot loop (what i guess is it's a GSM version only?)
3. I want to make it back to original, so I use that Raphael_CDMA_Relocker (BEFORE I REALIZED should flash BELL Stock rom first).
4. in tri-cololr screen, now it says RAPH800 SPL-0.37-0000 (relocked already?)
5. I could not flash anything in anymore, ActiveSync conection could not been connnected, and RUU always said 262 error and when reboot 100% goes to reboot loop, have to take out of the battery to close it.
Anyone have suggestion how should I do? I am still in the 1st month warranty, but afraid Bell will not accept it.
I tried hardset, use Raphael_CDMA_HSPL_037 to lock it again (failed due 262 problem, stucked on 0% screen), or put different RAPHIMG.nbh (tried one by one) to SD card (always only "loading", and after long time i have to reboot it and still the same infinite loop).
Thanks for you patience, please ignore my bad english.
unbrick
i suggest if you havent already done so: to put .nbh image on your sd card and boot it.
I agree. the only thing at this point you can do is flash from the SD card.
Take it out of your phone, and plug it into your computer. Take the .nbh file from another ROM that has worked for you and rename it RAPHIMG.nbh . Then copy that onto the Root of your SD card. put the card back into your phone, and enter bootloader by holding the power button, and volume down button, take your stylus and reset. (Don't need to hold the center okay button like a hard reset) take the stylus out and follow the instructions.
on my experience download a shipped ROM of any kind. If you still see SPL 0.37.CMONEX i think you are still safe. Just plug it in, active sync will not recognize it since it is in a different operating mode, just execute the shipped rom and that should do the trick.
unforunatly theres no bell shipped, just bell dumped roms..but put it in bootloader (hold volume down, poer, then stylus in reset hole till tri-colour screen) and plug it into your computer. does the word 'serial' change to 'usb' at the bottom? if so, run the RUU for the bell stock rom. feel free to pm me, im on bell too and im sure we can sort you out mate. lemme know if you cant find the stock bell rom
the-wrangler said:
unforunatly theres no bell shipped, just bell dumped roms..but put it in bootloader (hold volume down, poer, then stylus in reset hole till tri-colour screen) and plug it into your computer. does the word 'serial' change to 'usb' at the bottom? if so, run the RUU for the bell stock rom. feel free to pm me, im on bell too and im sure we can sort you out mate. lemme know if you cant find the stock bell rom
Click to expand...
Click to collapse
on the money here..just what i would have suggested!
Not really happy with this phone anymore. I flashed my first phone to a rom, everything seemed fine, then the freezing and lagging of the phone happened. After multiple resets, the phone starts to turn off by itself. Then I have to take the battery out and restart it this way. After a while of this the screen stays white and I have to leave the phone alone for 30 minutes, before it will start up again. Other issues with the phone after flashing the phone:
Phone would get hot at times when charging and show no signs of charging
Lag and Lag and Lag
I would set up emails and wifi accounts and then the phone would lose all the settings and I would have to reset everything
Now my second phone is doing the same as above....Getting a replacement sent to me
Will I have to reload the stock SPL from my sd card?
Where is the link to the stock ROM?
I believe from looking in the TMOUS HD2 forum section, the TMOUS stock rom you're looking for is the following:
http://www.vbnfiles.com/xda/xmoo/Le...dio_Signed_15.34.50.07U_2.08.50.08_2_Ship.zip
Will obviously wipe everything and flash back ROM and Radio as to the how it was the day you bought in if you need to send it back for repair.
Flashing Via MicroSD Card
NOTE (PLEASE READ): If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. If you flash a v2.01 or later Rom (with SPL2.*) you will NOT be able to reinstall HardSPL onto your device and could end up bricking it. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Note: Sorry if you knew all this already and was just looking for the ROM itself, just thought I'd post in case, I guess it's the same process on TMOUS as it is on my EU HD2, if anyone can clarify?
OK well I have trying my best as a noob to research for 2 days not in and out on how to fix my issue
My friend tried rooting my phone and to install a different rom. I am on 2.1 and unfortunately I got the phone used with 2.1 already on it so I don't know if it was a leaked or legit 2.1 rom, and I am learning as I go here to fix this issue as I have never new how to do this stuff nor have I ever done it.
Where I am at now:
only thing that happens when I hit power is the phone "vibrates then stays on the 3 skateboard screen" or press "volume down + power" and it goes to the Hboot screen. I go into recovery and it goes to clockworkmod and from there after trying to install any roms from the sd card it says on the last 3 lines
"E:Failure at line 9:
copy_dir PACKAGE:system SYSTEM:
Installation aborted.
and every time I go back or power up to the Hboot screen it does not have any "update bar" (I guess if this was done right as I read on other threads there should be some type of update bar) on the right corner or any other options "for me to select" accept:
FASTBOOT
RECOVERY
CLEAR STORAGE
SIMLOCK
and then with some other info above the Hboot highlighted in blue
I have tried formatting the sd card a bunch of times, I did the clearing of the "wipe data, wipe cache partition, wipe dalvikcache" as I read to do over my reading, but I see that if I go under any restore options under clockwork, no files are found for me to back up too so I am seeing he did not back up any of my info, I also have tried using 2 different ds cards.
So more less it looks like my options are to get this fixed from the only place my phone will boot to with options and thats when I press volume + and power so I guess loading whatever I need to my sd card>>if thats an option or am I screwed, I have seen many tutorials but none of them start where my particular position is stuck at in Hboot. this is my only phone and I had to buy a prepaid which is just about out of minutes, I put an add on craigslist trying to get someone I will pay to fix my issue but no luck, please I need help and I will pay u somehow to guide me through this of my exact issue, I was trying to get to rom 2.3 but if it's easier to get back to 2.1 rom then so be it.
PLEASE!~~
Please HELP!
Cheeva316 said:
Please HELP!
Click to expand...
Click to collapse
Got a solution in the making for you, just give me about 30 minutes.
Edit: Maybe 45 minutes lol, sorry i'm testing this before I have you do it to see if it works.
Ok download the following files:
http://www.mediafire.com/?njwqa7axwzyaqgb
http://www.mediafire.com/?f69cl8dc747h0l9
http://www.mediafire.com/?xg8nnqs177xggx4
http://www.mediafire.com/?qxpi5wsx5lzbhbo
http://www.mediafire.com/?4tg67hck7vh1xxs
Edit: Flash the "rootme.zip" first then follow the rest.
Now what you need to do first is extract the "nandroid" file to somewhere you can easily find it.
Now take the folder called "nandroid" along with all the other zip files you downloaded and place them on your sd card. Put your sd card in your phone and power on with volume down+end. Press volume up. Use the trackball to select "Backup/Restore". Use the trackball again to select "Nand Restore". Use it again to select "HT9BGHG01402". Use it again to select "BDS-20110125-0901". Let the restore run, then power off your phone. Turn your phone back on with just the power button, let it run (might even take up to 10 minutes for the phone to start up). Let me know if the phone boots up or not after about 10-15 minutes. This should work and if it does then we can go from there, even to getting you 2.3 if you want.
You might be asking, what the hell is he having me do ? Here's what i'm doing. I made a nandroid backup a few months ago of when I had kaosfroyov39 which is a 2.2 rom. I am going to have you flash MY backup to YOUR phone which when done right, CAN work. Anyway, let me know what happens and remember to give the phone about 10-15 minutes to boot all the way.
Cheeva316 said:
"E:Failure at line 9:
copy_dir PACKAGE:system SYSTEM:
Installation aborted.
Click to expand...
Click to collapse
( Another phone on the precipice of being ruined by someone's cobbled-together "clockwork" recovery. )
If the /system flash memory partition got corrupted in a way that left a lot of pages marked as bad pages, then the /system partition will be "short", and only small ROMs will successfully load into it, if at all. That might be the cause of the above error messages.
But - because you are using Clockwork, there is really no way to know if that is the case, or if you simply have a whole bunch of corrupted ROM files on your SD card. That's because Clockwork does not verify ROM files before it starts flashing them - which allows total garbage to be flashed to the phone. (That's why Clockwork should never be used by newbs).
Here's what I would suggest you do.
- Make sure you are keeping the phone well charged. (Leaving the phone in HBOOT mode will discharge the battery quickly, even if it is plugged in to the charger, BTW).
- Report the exact bootloader version you have - probably 1.47.0000 or 1.49.0000, but it could be something other. Please be precise.
- With the power off, eject the SD card out of the slot and see if you can boot into the normal HBOOT menu with no SD card in the slot. Report your result.
- Boot into the recovery menu and tell us what version # of the recovery you have. If you can determine the details of how your friend attempted to root the phone, that might be pertinent. Again - precise details are valuable; vague hand-waving not so much.
- The Amon_RA recovery has a mode ("USB-MS toggle") which allows you to mount the SD card to the PC. Does your "Clockwork" recovery have this feature, or are you able to put files onto the micro-SD card using a media slot on a PC?
- Be aware that one or two people that were in situations that are very close to what you described ended up bricking their phones because they went from where you are now to attempting to use either a PB00IMG.ZIP ROM, or an RUU utility. Their phones went from bootable (in the way that yours is now) to bricks in that process.
What I would suggest you do at the moment is to find the SMALLEST Eris** ROM you can find, get it onto your SD card, verify that you didn't corrupt it, and then perform a "wipe data/factory reset" in your recovery and attempt to install it. If you get the same errors as above, then you should definitely NOT try to do a PB00IMG.ZIP or RUU installation. (The current gingerbread ROMs (e.g. GSB v1.4) are pretty small - they only use about 65% of the /system partition.)
I have a flashable "repair" file which might be applicable. It is not a "ROM" per se - it uses some low-level MTD (flash memory) repair techniques, and also flashes into place the original Amon_RA (v1.6.2) recovery, instead of whatever p.o.s. "Clockwork" recovery you currently have on the phone; but I regard it as something which should only be used as a last resort. But - without some more details and testing on your part, I don't feel comfortable about posting it up.
Let me know.
**PS I wanted to ask one more question - this is an Eris we are talking about, right? (I note you were posting in the Hero CDMA forum not so long ago).
Well I want to thank you for replying with such info but it seems that the recovery image file that I reinstalled on the phone was bad cause when it was updating the bar was going up but as it was going through each item it was updating.. I noticed "bootloader in red letters" with I believe saying "error" next to it and then same on another item it tried updating then the phone powered off and now it's dead, tried everything, no charging light comes on, computer (2 different computers) wont reconize it, it's doing nothing at all, I will try to get my hands on another battery but I am broke, but I doubt it's the battery cause I heard with a bootloader error (or damaged) then the phone won't boot up or do anything so I guess the phone is scrap for parts which sucks cause now my friend who started this deal killed my only phone me n my family had, another lesson learned...time to try n sell some stuff on craigslist..damn
Yes it's a Droid Eris...or was! damnnnn...
Again thank you for your help very much appreciated...
Wish I would of read this part before I let my friend re-load the "PB00IMG.ZIP" cause thats exactly what he loaded and then it started the process what I jus described above..f***k!
Be aware that one or two people that were in situations that are very close to what you described ended up bricking their phones because they went from where you are now to attempting to use either a PB00IMG.ZIP ROM, or an RUU utility. Their phones went from bootable (in the way that yours is now) to bricks in that process.
Cheeva316 said:
Wish I would of read this part before I let my friend re-load the "PB00IMG.ZIP" cause thats exactly what he loaded and then it started the process what I jus described above..f***k!
Be aware that one or two people that were in situations that are very close to what you described ended up bricking their phones because they went from where you are now to attempting to use either a PB00IMG.ZIP ROM, or an RUU utility. Their phones went from bootable (in the way that yours is now) to bricks in that process.
Click to expand...
Click to collapse
Well, I am very sorry that this happened to you and my advice to you didn't reach you in time. From the details that you added, I am pretty sure that you indeed have a hard brick.
BUT - the death of your Eris can still help others avoid the same fate. If you can reconstruct the rooting process you went through,
[SIZE=+2]PLEASE LET US KNOW EXACTLY WHAT ROOTING METHOD YOU USED[/SIZE] - and then we can wave people away from it.
When I say exactly, I mean extremely specific: do you still have the download file that you used? If so, push it up to an uploader site and give a link to it. (I think you mentioned unrevoked or something). Do you still have the exact link you used to download that rooting software? Was it Unrevoked? Z4root?
bftb0
I will tomorrow as I saved all the files on my laptop n I am on my pc now, but will do try my best as I am a newb to this phone stuff
Did you try what I suggested or is it too late ?
phone wont do anything so cant do nothing...
Did you find out any more details about the rooting method you used?
might be a couple more days till I can get to it, my laptop is messing up now...all the saved info was on it
I've spent a couple days searching, but there doesn't appear to be a relevant enough thread to help me here, so I've resorted to asking for help, hopefully you guys can help me figure this out.
I got my girlfriend a used Telus SGH-T959D (same thing as the T-mobile version pretty well) several months back. It was on stock 2.1 and worked fine but was very laggy compared to my rooted HTC Desire on oxygen 2.3.2. So I rooted it and installed a 2.2 rom with Voodoo sound control (but no lagfix), and she's been using it this way for months now. It was better than stock but still laggy. I can't remember what rom it was but it was based on Samsuck firmware, hence why it's still laggy I guess.
For some reason, when I originally rooted it I had trouble with CWM recovery not installing, I can't even remember now what exactly was happening, but I managed to get the rom installed without a proper custom recovery, so when I go into recovery it's just the stock Samsung recovery, with no options for nandroid backup, restore, flash zip from sd card, etc. Basically I can't do anything useful in recovery.
Anyways lately, worse and worse she has been getting the Android text message to wrong recipient bug. If you aren't aware of it, it causes messages you sent to go to a different person in your text message message list. No it is not user error.
So I decided to try and data wipe. After this there is basically no launcher when it boots up. The notification pulldown is there and working, and it shows the phone has a signal and wifi is turning on and working, capacitive buttons light up when you press them, but you can't do anything except grab the pulldown.
It won't connect to USB when booted up, phone shows a message that you must close running processes first, or something like that. But I cannot flash a rom from recovery anyways, since it only brings up a stock recovery.
I can get it into download mode, if I hold my tongue just right and try several times, but not sure what to try to flash with Odin. I already downloaded an ICS Passion rom, but then reading the tutorial saw that I must first download CM7 and install that, then upgrade the bootloaders to the GB ones, then flash the ICS rom. I would really like to at least upgrade to 2.3 and something not based on Samsung fw, but the main priority is to get it working again.
Anyways, whatever you guys can suggest to try would be greatly appreciated. Thanks.
Honestly bro, everything I'm seeing in Google makes it seem like that phone is more on par with the Galaxy S Fascinate than with our Vibrant. Although on the exterior they all look so similar... I dunno, maybe check out their forums and see if you get anymore help there?
Here's the link:http://forum.xda-developers.com/forumdisplay.php?f=718
Goodluck!
The title of this thread looks similar to my problem with my Samsung Vibrant. So I would ask it here, too.
I'm not sure if I bricked my vibrant, it's still power up, only to to first screen, which has the words Vibrant (and) Samsung and stay there forever.
I first rooted my Vibrant successfully.
Then, I've followed the instructions below:
1. Download the latest version of the ROM from the original development page.
2. Transfer the downloaded zip file to the root of the internal SD card on your phone.
3. Turn off your phone and wait for complete shutdown (wait for capacitive button lights to go off).
4. Then, boot into Clockworkmod (CWM) recovery. To do so, press and hold these 3 buttons together: Volume Up, Volume Down, & the Power button till the screen turns on, then let go of the buttons. In recovery, use Volume keys to scroll up and down and power key to select an option.
5. Perform a full Wipe (this will not wipe your SD cards)
a. Wipe data / factory reset –> then Select Yes - Wipe data/Factory reset on the next screen.
b. Select “mounts and storage“, then select “format system” -> select “Yes” on next screen to confirm. Then, select “go back” to go back to the main recovery menu.
6. Now scroll to “Install zip from sdcard” and select it.
7. Select “Choose zip from sdcard”. Scroll to the file you transferred in Step 2 and select it.
8. Now confirm installation by selecting “Yes — Install **your_rom_file_name**.zip – The ROM will start installing.
9. The phone will reboot to recovery in the middle of the installation, then continue installing the ROM.
When I got to step 7, instead of running the zip file downloaded on step 1. I run the update.zip (something like that). And I couldn't get back to the CWM recovery screen anymore. Only I can boot it to the regular recovery screen, where it let you:
reboot the system
reinstall packages
delete all user data
delete cache data.
Or boot up to the screen described at the beginning of this post.
So what should/can do to fix this problem?
I think my phone is t959 (it's t-mobile Samsung Vibrant)
Thanks for the reply. As far as I thought the only similarity between this and the at t fascinate was the name fascinate. There's is the i5000 and mine is the t959d? Should this post be moved over there? I found a thread there with someone having partly. the same issue as mine not being able to install cwm but its been there for days and likely will not be replied to.
I've spent a lot of time trying to fix messed-up installs. Seems to me that if for any reason you can't rrflash the rom, or reflashing and wiping doesn't work, just Odin-ing back to JFD and going from there is the best bet.
Well I was about to go ahead and download stock JFD and try flashing that but it appears that Mega upload has been shutdown by the FBI for fraudulent activity, and Rapid share is not working either. Maybe they're too busy because of the mega Upload shutdown or they were owned by the same people and have also been shut down. So now I'm not sure where to even find files that are safe to flash.
I just spent another hour on here and Android forums, and basically all the the threads are one or two posts, with no resolution to the OP, and none of the downloads links anywhere are working. I'm pretty patient but I'm ready to give up. Does anyone want to trade a soft bricked T959D in mint condition for any old beatup HTC that works? I've had my fill of Samsung's now.
No trade sorry but if you want to donate shoot me a pm.
Before you dump it, give me some time to look into this and I'll see if I can get you up and running with some files. Sammys are way user friendly unless you aren't doing something right, then you could always go back to stock.
Hold the phone. Haha. I'll get back to you.
You too ciditin
Thanks Woodrube, I will definitely wait patiently as long as I know I'm going to be able to sort it out eventually. I'm busy with schoolwork so even though I enjoy this kind of thing I hate spending hours upon hours on it just trying to get the phone operational again.
I've been spoiled by my htc desire, it's been almost foolproof to do anything after spending a short time reading a few FAQ's and there have been no close calls. Soon I'll probably try an ICS rom once they get a bit more stable.
I will definitely do a donate if you can help me get it going with a decent rom. I would love to have lag fix on it since my girlfriend is a bit annoyed at the lag.
Since I got my first Android phone in August 2010, I've rooted and rom'd an LG Shine Plus, LG Optimus One, HTC Desire, the T959D and Galaxy S2 T989D (sold after I got it on an early renewal). I also had to fix my sisters I9000M after a failed 2.3 update operation. So I'm no expert on this, but I've got a little bit of experience messing around with stuff. Just they all require different processes, different programs to do the job, so you have to relearn it for every new phone.
The Samsung's have been the biggest pain compared to the others, but I think it's mostly because the Canadian versions are always slightly different than the Tmobile version, but besides that Samsung always has several different versions of the same.
If I get this thing up and running again I will probably check out your GPS fix thread, cause the GPS on this phone would lock on but it was way out to lunch. Like 6 streets away from us out to lunch.
I found the way to fix my problem, hopefully it'll fix yours.
I was able to restore my stock.
Here is what you have to do.
WARNING!!! THIS WILL WIPE ANY DATA ON YOUR DEVICE, IT WILL REPLACE YOUR BASEBAND, KERNEL, RECOVERY AND OS.
DOWNLOADS:
ODIN application
512 PIT file - I can't post link so pm me
T-Mobile Vibrant JFD Image – I can't post link so pm me
USB Drivers from the Samsung Galaxy S – 32 Bit Windows Download \ 64 Bit Windows Download (again I can't post link, yet)
INSTRUCTIONS:
1. Turn off your phone (remove battery, and usb cable to pc).
2. Plug usb cable to your phone (this is just for easy to connect to the PC in the next step), do NOT connect it to your pc just yet.
3. Get your phone into DOWNLOAD mode by holding the Volume Up, Volume down, and plug your usb cable to your PC. A yellow digging Android sign should be on the screen of your phone. This may take a few tries to get it right.
3. Launch ODIN.The third box dow from the top-left box should then say a COM port (the box under the top-left box should be yellow).
4. In ODIN, load each file with its corresponding field:
___a. Click PIT and select *.pit file extracting from the 512 PIT file above.
___b. Click PDA and select the *.tar, stock JFD file.
5. Don’t check anything else, the other two boxes should be checked by default (Auto Reboot and Reset Time)
6. Hit “start.” Be patient for a couple minutes! (The bar under the top left box should show the progress, and on you phone, too)
7. You should have your Vibrant back in with stock configuration.
Good luck!
NOTE: COM3 worked fine for me. COM should not matter as long as you are using the correct drivers.
350Rocket said:
I will definitely do a donate if you can help me get it going with a decent rom. I would love to have lag fix on it since my girlfriend is a bit annoyed at the lag.
Click to expand...
Click to collapse
Ok. I wasn't soliciting for a monetary donation, I was just going off that you wanted to trade. I can't trade but if you ever want to donate your phone then just PM me.
I have to agree with kawika that everything I have read has been that your model number is for the Fascinate. Easy tip off would be; does your phone have a sim card? It is probably a CDMA phone with no sim slot. I suggest getting the files you need from the Fascinate forums as I am almost positive that the T959 files will not work on the T959d. Since you have modded a I-9000m you know that they are slightly different than the I-9000. Same thing goes with this circumstance.
Good luck and sorry that there wasn't more I could do but it is just a different phone.
@Citidin - Good to see you got yours solved. If you have questions, please ask (in the correct thread for your question a this one will probably be closed out).
It definitely has a sim card and it's HSPA, I pulled the Sim card out and put it in my HTC Desire for her to use, and put my SIM card in this crappy little LG Optimus One that's too small for me to type on. So I guarantee it has a sim card and is nothing like the Verizon phones which will not work on any of the Canadian carriers AFAIK. I think nobody understands what the phone is, and that's why almost every thread with a problem like this ends in 0 replies. I think from now on I will stay away from Samsung's abortion phones that they sell in Canada. Or at least I will research community support before getting one.
Ours is called the Fascinate, but its completely different model # than theirs, it is the T959D. Just like how the new Telus galaxy S2x is the T989D, same phone as the T mobile T989_.
For some reason there seems to be a few posts in the Fascinate section, for Telus only, I think that only started because of confusion about what the phone was, but the phone has nothing in common with the Verizon CDMA version. Actually I think if you look up, just about every phone that Telus or Bell (same network basically) gets, is a phone that T mobile got first. HTC Amaze being another one. HTC Desire Z is the same as the Tmobile G2.
Sorry I misunderstood you about donating the phone itself. My last effort will be the JFD file that Citidin sent me a link to. Hopefully that gets it going. If not I will stash it away until I have extra time to try again.
Well once I got the JFD file downloaded and put phone in download mode, turned on Odin, realized the PC recognizes the device attached and being malfunctioned, so I cannot flash with Odin.
I tried Heimdall which I downloaded yesterday, but the program won't load as it says I'm missing a DLL file.
I tried Android flasher which I downloaded who knows when, and tried to just install a recovery image with it, but it gets stuck while pushing recovery image and the program locks up.
I decided to try my girlfriends Laptop instead of mine after maybe 40 failed attempts to get Odin to communicate on mine, and to my surprise it recognized it right away. I transferred my files, with the JFD to this computer and then flashed with Odin. It took about 2 minutes and it was up and running. I checked about phone and it said 2.3.3 firmware. Really confused I looked back at odin and realized I flashed the I9000M stock 2.3.3 firmware (KG3) that I flashed on my sisters phone back around xmas. I forgot I did that on this laptop.
Anyways it is working as it should except for the home button not working (which I had already read about in a thread about using I9000M or Vibrant roms on the T959D).
While it is unfortunately stock again, the 2.3.3 should fix the original problem of sending to texts to the wrong recipient, and it also seems a lot less laggy. I think I'll just let her try it as is and hope she is happy.
If you use the JFD file from the link I sent you, it should be the stock Tmobile Vibrant.
Similar problem
Sorry dont mean to hijack your thread but I think I am having a similar problem - posted in the wrong spot before so hopefully I am ok here...
Have a Vibrant and some how got crossed up on it.
I have been able to use Odin to update the phone, however after it says its done, it does a reboot as it supposed to, shows the samsung screen then just shuts down.
After about a hundred tries, someone pointed me to Eugene's no brick. I tried that and it will fix it so it will boot and go into recovery, but I can't seem to do much once I get there. My only options are to update, wide data and wipe cache. Can't get to the point where I can load an update onto the unit.
I tried wide data and reset, then reboot. It shows the samsung vibrant logo, then the splash screen, then the big S and then screen goes black and the cap buttons stay lit.
If I try to go back and load the stock pit and jfd file, it just goes back to not booting at all and shutting down after the logo
I cant seem to get it into recovery unless I do Eugene's fix
In one of my earlier attempts, I did check to repartition as direct in one of the other threads - been chasing this a while now!
Edit: It was originally a bell phone - does this matter?
If it was a Bell phone than it should be the I9000M. It sounds like your problem is a bit different than mine was. I was able to get into recovery mode and download mode just fine. I just didn't know which files to flash with.
I intended to flash the JFD that citidin sent me, but I accidentally use the KJ3 (latest I9000M 2.3.3 firmware). The I9000 and Vibrant roms are compatible with the T959D Telus Fascinate though, only problem being no home or search button.
It sounds like the Eugene thing (whatever that is, I'm not familiar) gets you into stock recovery. Like my original issue, you cannot flash or mount the sd card, or much of anything with the stock recovery.
Do you know that the file your flashing is compatible with your phone (the I9000M I assume)? More info that would probably help, is what firmware did you have on it before, was it JFD? What update did you try on it? Bootloader version - there are gingerbread bootloaders, and froyo bootloaders I think?
Have you tried different files other than the one that doesn't seem to boot up for you? I think most of the tutorials I've looked at, said not to check repartition. When i finally got this T959D working with the I9000 rom I did not check repartition and did not select a pit file, just the PDA, phone, CSC.
Yes it is a I9000M - I was trying to load the JFD tar file along with the 512 pit file. I followed a thread in the I9000 section and loaded a JPD tar file onto it, now it shows up as a I9000B - maybe I should stop
I can now get into recovery and or download (i think the steps are differant than hold both volume buttons - mine is holding the volume one way for recovery and the other way for download, along with home and power)
Wondering if I am in this bind because it isnt really what most are calling a Vibrant - maybe under Bell it is something else.
Bootloader? didn't know I had to do anything there
I just picked up the phone used from someone - I assumed it was stock and didn't do a good check to see what was on it.
I9000m is not the Vibrate but rather the Bell version of the Captivate. There is a dev section for the I9000m in the I9000 group.
I would definately stop what you are doing and read over there.
******
Also 350 you can re-map your keys to work but I am mobile now and cant search it for you. Reason being that the. Vibrant keys are laid out differently in, ahh can't think right niece where they are, but it is fixable. Just search key remap or remapping.
Thanks very much for the help - have to wonder why they cant call them the same names regardless of where they are sold - guess thats why they get the big bucks
I have the GT-S7560M through Solo (Bell) and I rooted it shortly after purchase last year. I've been happy with the phone and for the last few weeks an upgrade notice has been appearing but would fail when applied. Some searching suggested the root was interfering. At first I started to look into un-rooting the phone, but then thought that a factory reset would be the simplest, least-risky solution. I had done a factory reset on my last Galaxy phone without a problem so it seemed like a safe choice. I backed up the contact info, etc with Kies (I don't use many apps so I didn't go all out ie Titanium Backup) and removed my SD card.
Now the phone boots to screen asking me to pick a language and press Start. Then it moves on to a black screen with the info bar at the top (clock, cell strength, data xfer) and nothing else. It is auto-rotating. The phone does react to touches with the buttons lighting up, but I can't get anywhere. Kies can see the phone, the phone number, the firmware version and all that. It reports Internal Memory as 84.83MB used of 1.58GB. I can navigate through the phone using Windows Explorer. I did a Restore with Kies but it doesn't seem to have had any relevant effect.
I am able to boot into CWM Recovery. I don't remember doing a back-up with it, and when I ask it to restore from either the SD card or the interal SD it says it can't mount.
At this point I would start thinking about taking the phone back to the store, but a flash counter appears during start-up and I'd rather they didn't see that for obvious reasons.
When I google I just get people who have bricked their phones. I just want my phone to work again. I'm not worried about modifying it further to achieve that.
Yoqui said:
I have the GT-S7560M through Solo (Bell) and I rooted it shortly after purchase last year. I've been happy with the phone and for the last few weeks an upgrade notice has been appearing but would fail when applied. Some searching suggested the root was interfering. At first I started to look into un-rooting the phone, but then thought that a factory reset would be the simplest, least-risky solution. I had done a factory reset on my last Galaxy phone without a problem so it seemed like a safe choice. I backed up the contact info, etc with Kies (I don't use many apps so I didn't go all out ie Titanium Backup) and removed my SD card.
Now the phone boots to screen asking me to pick a language and press Start. Then it moves on to a black screen with the info bar at the top (clock, cell strength, data xfer) and nothing else. It is auto-rotating. The phone does react to touches with the buttons lighting up, but I can't get anywhere. Kies can see the phone, the phone number, the firmware version and all that. It reports Internal Memory as 84.83MB used of 1.58GB. I can navigate through the phone using Windows Explorer. I did a Restore with Kies but it doesn't seem to have had any relevant effect.
I am able to boot into CWM Recovery. I don't remember doing a back-up with it, and when I ask it to restore from either the SD card or the interal SD it says it can't mount.
At this point I would start thinking about taking the phone back to the store, but a flash counter appears during start-up and I'd rather they didn't see that for obvious reasons.
When I google I just get people who have bricked their phones. I just want my phone to work again. I'm not worried about modifying it further to achieve that.
Click to expand...
Click to collapse
You have posted in wrong section
BTW your solution is just flash stock Rom via ODIN , your problem will get solved.
BTW your solution is just flash stock Rom via ODIN , your problem will get solved.
Click to expand...
Click to collapse
I've just finished doing that, and it appears to have worked.
For anyone else with a similar problem who finds this thread:
- Go to the FAQ here: http://forum.xda-developers.com/showthread.php?p=45767157#post45767157
- Download Daver18qc's root kit at the link provided (you'll have to scroll down to the second post). You want this to get Odin; don't worry about the zip's other contents.
- Go here: http://www.sammobile.com/ and register. It's free and all it wants is an e-mail and your country.
- Go here: http://www.sammobile.com/firmwares/ and type s7560m in the search box. The list will automatically update. I'm a Solo customer and chose 'Canada (Bell Mobile)'. When I first tried this in Firefox I would get a screen telling me I wasn't logged in. I tried it in IE (which I never use and so is 'clean') and the download went through.
- Go back to the FAQ http://forum.xda-developers.com/showthread.php?p=45767157#post45767157 and scroll down to 'Short Tutorials' and 'How to Flash with Odin:'.
- One thing it leaves out is that when you boot into Download Mode, you will first get a warning screen that asks you to either press Volume Up to continue or Volume Down to abort and reboot. Not a big deal but it caught me off guard. Odin will not detect the phone until you get past this screen.
- Continue with the Tutorial. After it is done you will have to setup the phone again. But at least it's working now.