[Odin][Recovery][Bootloader/Modem/Recovery/Kernel][G900TUVU1DOB1] - T-Mobile Samsung Galaxy S 5

I saw alot of people asking about these, so I've repacked the stock Modem, Bootloader, Kernel and Recovery from the full .tar separately as Odin flashable .tar's for anyone who needs them. And also created a recovery flashable stock kernel.
I've tested them all out and they work correctly for me, use at your own risk though. For G900T ONLY
Also, consider this: Warning flashing Bootloader/Modem/ FULL FIRMWARE LOLLIPOP
Flashable in Odin:
Bootloader/BL:
Bootloader
Bootloader Mirror
Phone/CP:
Modem
PDA/AP:
Kernel
Recovery
Full .tar thanks to @GSXeclipsePSI and SamMobile
Flashable in recovery(I used TWRP):
Stock Recovery Flashable .zip

Thanks so much for posting these. I upgraded modem, bootloader and kernel no problem.
Stock kernel seems to work better than the ktoonsez one (for me at least), but i don't think I can get SElinux to be permissive on the stock kernel (doesn't seem to stick when I use SElinux mode changer app), which in turn seems to mean I can't use Viper...so I flashed back ktoonsez kernel since I can't live without Viper
Any thoughts on what I may be doing wrong...I know this isn't a Viper thread, but I'm pretty sure I read over there that SElinux permissive was a must for Viper to work, so if stock kernel doesn't allow for that, then my next thought is it possible to have stock kernel that's SElinux permissive?

How did you guys install the stock kernel? I used odin, wiped cache, and all I get is the initial Galaxy S5 Power By Android logo and it never goes past this.

did you try pulling the battery before you start the phone up on download mode? I always have to do that first and the always works for me.

cyhamada said:
Thanks so much for posting these. I upgraded modem, bootloader and kernel no problem.
Stock kernel seems to work better than the ktoonsez one (for me at least), but i don't think I can get SElinux to be permissive on the stock kernel (doesn't seem to stick when I use SElinux mode changer app), which in turn seems to mean I can't use Viper...so I flashed back ktoonsez kernel since I can't live without Viper
Any thoughts on what I may be doing wrong...I know this isn't a Viper thread, but I'm pretty sure I read over there that SElinux permissive was a must for Viper to work, so if stock kernel doesn't allow for that, then my next thought is it possible to have stock kernel that's SElinux permissive?
Click to expand...
Click to collapse
I have the same problem, nothing sounds as good without Viper But i'm dealing with the stock kernel for now.
ALaz502 said:
How did you guys install the stock kernel? I used odin, wiped cache, and all I get is the initial Galaxy S5 Power By Android logo and it never goes past this.
Click to expand...
Click to collapse
As cyhamada says above, you sometimes have to pull the battery before going into Download mode. Also, try a different version of Odin. With Odin 3.09 flashing the full .tar results with my phone sitting on the boot logo.

Updated Bootloader/Modem, yet my Baseband hasn't changed from NK2, shouldn't it change to the OB1?
I'm running CM12, boots fine, LTE signal's been junk since upgrading to NK2 and was hoping this new modem would have some corrections. (Phoenix, AZ)

Paulenski said:
Updated Bootloader/Modem, yet my Baseband hasn't changed from NK2, shouldn't it change to the OB1?
I'm running CM12, boots fine, LTE signal's been junk since upgrading to NK2 and was hoping this new modem would have some corrections. (Phoenix, AZ)
Click to expand...
Click to collapse
You have to be on stock for it to stick, and sometimes it will take a couple tries of lashing it even then, usually the best way is to pull battery and then boot into download.

aaricchavez said:
You have to be on stock for it to stick, and sometimes it will take a couple tries of lashing it even then, usually the best way is to pull battery and then boot into download.
Click to expand...
Click to collapse
I actually got it to stick on cm12 after pulling battery.

spidey2483 said:
I actually got it to stick on cm12 after pulling battery.
Click to expand...
Click to collapse
Really? What i've always seen and experienced is that you have to be on stock, on previous updates I had to go to stock to get it to stick. I guess ymmv.

aaricchavez said:
Really? What i've always seen and experienced is that you have to be on stock, on previous updates I had to go to stock to get it to stick. I guess ymmv.
Click to expand...
Click to collapse
It stuck after I did a battery pull on the 3rd or 4th try, the blue "secure boot: enabled" appeared when it actually worked. I went from Recovery > Download, odin flashed, pulled battery, odin flashed and it worked.

bootloader went fine but modem causing me to hang on sammy screen and i cant seem to get past it no matter what i try.
tried kernel now im hung on GS5 screen. lol

aaricchavez said:
I saw alot of people asking about these, so I've repacked the stock Modem, Bootloader, Kernel and Recovery from the full .tar separately as Odin flashable .tar's for anyone who needs them. And also created a recovery flashable stock kernel.
I've tested them all out and they work correctly for me, use at your own risk though. For G900T ONLY
Also, consider this: Warning flashing Bootloader/Modem/ FULL FIRMWARE LOLLIPOP
Flashable in Odin:
Bootloader/BL:
Bootloader
Phone/CP:
Modem
PDA/AP:
Kernel
Recovery
Full .tar thanks to @GSXeclipsePSI and SamMobile
Flashable in recovery(I used TWRP):
Stock Recovery Flashable .zip
Click to expand...
Click to collapse
Bootloader link is not working for me can anyone provide working link? Thank you all in advance.

ledezma2003 said:
Bootloader link is not working for me can anyone provide working link? Thank you all in advance.
Click to expand...
Click to collapse
It looks like it's up from here. Here's a mirror though.
Bootloader Mirror

aaricchavez said:
It looks like it's up from here. Here's a mirror though.
Bootloader Mirror
Click to expand...
Click to collapse
Thank you this one worked.

is there a way to root if were on lolipop?

darren.wlsn1 said:
is there a way to root if were on lolipop?
Click to expand...
Click to collapse
Have you tried CF-Auto-Root? Next thing after that I would say install TWRP and exit, it will ask to root if it doesn't detect root.

aaricchavez said:
Have you tried CF-Auto-Root? Next thing after that I would say install TWRP and exit, it will ask to root if it doesn't detect root.
Click to expand...
Click to collapse
ya i got twrp on through cf but had to sideload in twrp but never got sideload to open but now in stuck on tmo screen and never been stuck there

darren.wlsn1 said:
ya i got twrp on through cf but had to sideload in twrp but never got sideload to open but now in stuck on tmo screen and never been stuck there
Click to expand...
Click to collapse
How long has it been on the boot animation? First boot/first clean boot(new kernel, etc.) for Lollipop takes a while to build ART.

aaricchavez said:
How long has it been on the boot animation? First boot/first clean boot(new kernel, etc.) for Lollipop takes a while to build ART.
Click to expand...
Click to collapse
any tar i flash now is hanging on tmo screen for as long as i let it sit, im at point i just want it vto boot no matter what build i use
bit the bullet and reset in stock recovery

darren.wlsn1 said:
any tar i flash now is hanging on tmo screen for as long as i let it sit, im at point i just want it vto boot no matter what build i use
Click to expand...
Click to collapse
Here's what I would do if I were in your situation. Grab the full OB1 .tar and Odin 3.07 along with TWRP. I would: Odin TWRP>Do a factory reset>Pull battery>Boot into Download mode>Flash OB1>Let it sit for about 20 min. If you have adb set up on your computer I would also do "adb logcat" to see what exactly is going on. Although I don't recall if it'll pickup after a factory reset, I just do it so often on mine I never pay attention.
If that failed I would Odin TWRP and grab one of the Lollipop roms and flash that.

Related

TWRP 2.7.1.0 (ODIN)TAR (Recovery)

I figured I'd put a link to to TWRP 2.7.1.0. since I didn't see it in any of our threads . ( If I missed it and it is in another thread then Im sure Ill hear about it) . Flash this in Odin in the AP Slot and make sure the Re-Partition is (NOT) checked .
Here it is . Ill put up 2 links now just incase one don't work. Also you can use the TWRP app from the play store but I prefer Odin . EDIT: if you dont know what a custom recovery is then this is not for you .
https://onedrive.live.com/redir?res...0149&authkey=!AKLGo_jdf9JwbXY&ithint=file,tar
Or here is a direct link to the TWRP website http://teamw.in/project/twrp2/229
I'll download when I get home. Thanks
spirodave said:
I figured I'd put a link to to TWRP 2.7.0.0 . since I didn't see it in any of our threads . ( If I missed it and it is in another thread then Im sure Ill hear about it) . Flash this in Odin in the AP Slot and make sure the Re-Partition is (NOT) checked .
Here it is . Ill put up 2 links now just incase one don't work. Also you can use the TWRP app from the play store but I prefer Odin .
https://www.dropbox.com/s/ft04pkqjirok6cp/openrecovery-twrp-2.7.0.0-klte.tar
https://onedrive.live.com/redir?resid=A8F383A48E7815DD!19925
Click to expand...
Click to collapse
What is a custom recovery for? I installed and triped knox. I thought with an unlocked bootloader you never have to worry about a custom recovery. Just use mobile odin pro to flash any custom rom of your choice?
Can you give me a bit of info? Google will just confuse me more then I am
BROKEN1981 said:
What is a custom recovery for? I installed and triped knox. I thought with an unlocked bootloader you never have to worry about a custom recovery. Just use mobile odin pro to flash any custom rom of your choice?
Can you give me a bit of info? Google will just confuse me more then I am
Click to expand...
Click to collapse
If you have handset protection on your device dont worry about KNOX. Nothing Voids handset protection If you just type what is TWRP recovery into you tube you will see exactly what it is. Also Please see our Q/A thread
The official site is here: http://teamw.in/project/twrp2/229
Version 2.7.1.0 has been out for a long while now.
Forgot to mention followed this and everything went smoothly
highwaybandit said:
Forgot to mention followed this and everything went smoothly
Click to expand...
Click to collapse
Glad you got it working .
spirodave said:
I figured I'd put a link to to TWRP 2.7.1.0. since I didn't see it in any of our threads . ( If I missed it and it is in another thread then Im sure Ill hear about it) . Flash this in Odin in the AP Slot and make sure the Re-Partition is (NOT) checked .
Here it is . Ill put up 2 links now just incase one don't work. Also you can use the TWRP app from the play store but I prefer Odin . EDIT: if you dont know what a custom recovery is then this is not for you .
https://onedrive.live.com/redir?res...0149&authkey=!AKLGo_jdf9JwbXY&ithint=file,tar
Or here is a direct link to the TWRP website http://teamw.in/project/twrp2/229
Click to expand...
Click to collapse
I tried flashing the TAR in Odin and it says successful but I do not have TWRP? Its still the stock recovery. Does something need to happen before you flash the TAR to make it stick?
GeeZus21 said:
I tried flashing the TAR in Odin and it says successful but I do not have TWRP? Its still the stock recovery. Does something need to happen before you flash the TAR to make it stick?
Click to expand...
Click to collapse
So when you hold volume up + home button and power on the phone it boots into stock recovery not TWRP? I know for flashing modems you have to pull the battery for 5 or 10 seconds then put it back in and then use odin. I guess try pulling the battery for 5 or 10 seconds then put it back in and try again.. That is the only solution i have for you and it will probably work. Or you can try using this tool kit but it does the same thing ,it just does it automaticly .But try the battery pull first and if that dont work use this
http://forum.xda-developers.com/showthread.php?t=2721146
spirodave said:
So when you hold volume up + home button and power on the phone it boots into stock recovery not TWRP? I know for flashing modems you have to pull the battery for 5 or 10 seconds then put it back in and then use odin. I guess try pulling the battery for 5 or 10 seconds then put it back in and try again.. That is the only solution i have for you and it will probably work. Or you can try using this tool kit but it does the same thing ,it just does it automaticly .But try the battery pull first and if that dont work use this
http://forum.xda-developers.com/showthread.php?t=2721146
Click to expand...
Click to collapse
taking the battery didn't work. I'm on stock build KOT49H.G900TUVU1BNG1. Its the latest update provided by T-Mobile. I'm thinking the latest build is blocking TWRP from being applied. I'm assuming I need to downgrade to apply TWRP. Thank you for the suggestion!
GeeZus21 said:
taking the battery didn't work. I'm on stock build KOT49H.G900TUVU1BNG1. Its the latest update provided by T-Mobile. I'm thinking the latest build is blocking TWRP from being applied. I'm assuming I need to downgrade to apply TWRP. Thank you for the suggestion!
Click to expand...
Click to collapse
I thought NG3 was the latest update .. Yeah i would go ahead and downgrade or if you are rooted just download the TWRP app from the play store and install it throught that
spirodave said:
I thought NG3 was the latest update .. Yeah i would go ahead and downgrade or if you are rooted just download the TWRP app from the play store and install it throught that
Click to expand...
Click to collapse
You're right that was a typo. NG3 is what I have. I'm downloading NF6 right now from http://samsung-updates.com/device/?id=SM-G900T. Ill let everyone know if that works!
GeeZus21 said:
You're right that was a typo. NG3 is what I have. I'm downloading NF6 right now from http://samsung-updates.com/device/?id=SM-G900T. Ill let everyone know if that works!
Click to expand...
Click to collapse
Yeah let me know if that worked . Mine came with NCH . I actually rooted it while i was still in the tmobile store buying it . I had Towel Root on my SD. The sales guy at T-Mobile was trying to tell me there is no root method for my phone when i got it . Before the purchase was final i was rooted . The sales people all think they know everything about phones but in reality the only solution they have to most problems is to do a factory reset.LOL...........Good Luck
For those of you having problems flashing TWRP: download Flashify from the play store and flash TWRP from there. I've never used ODIN or a PC to flash a recovery. I just use Flashify. Works like a charm.
ahrion said:
For those of you having problems flashing TWRP: download Flashify from the play store and flash TWRP from there. I've never used ODIN or a PC to flash a recovery. I just use Flashify. Works like a charm.
Click to expand...
Click to collapse
I just flashed Twrp via odin on my PC with NG3 and it worked fine .. I am the complete opposite . I have never had any problems flashing a recovery with Odin on PC . The person that posted above said TWRP wasnt sticking because he was on the latest stock firmware but he must be doing something wrong cause it worked just fine for me . I always thought and still do think flashing with Odin on my PC has been safer than flashing with an app . Out of the 900 and something people that viewed this thread only one posted about having problems with it . Im guessing user error
GeeZus21 said:
You're right that was a typo. NG3 is what I have. I'm downloading NF6 right now from http://samsung-updates.com/device/?id=SM-G900T. Ill let everyone know if that works!
Click to expand...
Click to collapse
Hey i updated to stock NG3 just to see if i could flash TWRP with ODIN on my PC and it worked fine . IM not sure why your phone isnt accepting the recovery but it is not likely the latest firmware is causing it .Hope you got it all figured out
spirodave said:
Hey i updated to stock NG3 just to see if i could flash TWRP with ODIN on my PC and it worked fine . IM not sure why your phone isnt accepting the recovery but it is not likely the latest firmware is causing it .Hope you got it all figured out
Click to expand...
Click to collapse
Thank you for trying that for me. I downgraded to NF6 by flashing the full stock TAR from http://forum.xda-developers.com/showthread.php?t=2761412. I still was not able to flash TWRP. What's weird is towelroot wouldn't work either. I'm thinking something got patched that's not reversible. When I first got the phone Towelroot worked just fine. Ill keep searching the forums.
Thanks again!
GeeZus21 said:
Thank you for trying that for me. I downgraded to NF6 by flashing the full stock TAR from http://forum.xda-developers.com/showthread.php?t=2761412. I still was not able to flash TWRP. What's weird is towelroot wouldn't work either. I'm thinking something got patched that's not reversible. When I first got the phone Towelroot worked just fine. Ill keep searching the forums.
Thanks again!
Click to expand...
Click to collapse
Do you have USB debugging Enabled ? Its under developer options . If you dont see developer options go into build version in About phone and click on Build version until it says develper option enabled .Sound like that can be your problem .Nothiung was patched that couldnt be fixed by downgrading
spirodave said:
Do you have USB debugging Enabled ? Its under developer options . If you dont see developer options go into build version in About phone and click on Build version until it says develper option enabled .Sound like that can be your problem .Nothiung was patched that couldnt be fixed by downgrading
Click to expand...
Click to collapse
Yes USB Debugging is enabled. That wouldn't matter though because the phone is in download mode when I attempt to flash TWRP, right?
GeeZus21 said:
Yes USB Debugging is enabled. That wouldn't matter though because the phone is in download mode when I attempt to flash TWRP, right?
Click to expand...
Click to collapse
All i know is USb debugging needs to be enabled . There is no way anything was patched that would stop you from being able to flash a recovery. The boot loader would have to be locked . Go back to NCH and try towel root . I hate to say this but it has to be something you are doing wrong brcause i updated to the latest firmware already and flashed a recovery . Samsung can only patch thing to work on the firmware you are running .For example if you are on ne6 and something was patched on it then that patch wouldnt be relavant when you change firmwares . Unless it was a BootLoader . I would double check usb debug is enabled then reflash TWRP . Maybe re download the twrp and try it again . I have 2.7.0.1 up . If you already have that one try 2.7.0.0 . After you flash TWRP and try to boot into recovery what does it do? Does it boot into stock recovery?

"Firmware Upgrade Encountered an Issue" "Device not responding" Samsung Kies

"Firmware Upgrade Encountered an Issue" "Device not responding" Samsung Kies
I tried to flash an Android 5.0 ROM earlier, and my phone was only booting to the stock recovery (Safestrap was installed but I did a factory reset). Now, if the phone was turned off by removing the battery, it won't turn on when I hold the power button, or attempt to go into download/recovery mode. Nothing happens. If I plug it in, I can use whatever button combinations as normal. However, I don't think I can get to recovery mode. Both volume down/power and volume down/power/home enter download mode to the phone. I tried to flash a stock ROM in Odin, but it failed. Otherwise, it shows a screen that says " Firmware Upgrade encountered an issue. Please select recovery mode in kies and try again" And when I open kies, it just says "connecting" for an extremely long time until it eventually says "Device not responding" and I can't do anything. What do I have to do to fix this? I can't find anything for this phone that has had this problem or knows how to fix it. I've tried a few different things so far but flashing nothing in odin has worked. Any help is appreciated, thanks in advance.
Bumping for others to hopefully see... I've still made no progress and am in the same situation and simply can't find what I need to do.
What build were you on before you started? What file are you trying to flash with Odin?
Jmick363 said:
I tried to flash an Android 5.0 ROM earlier, and my phone was only booting to the stock recovery (Safestrap was installed but I did a factory reset). Now, if the phone was turned off by removing the battery, it won't turn on when I hold the power button, or attempt to go into download/recovery mode. Nothing happens. If I plug it in, I can use whatever button combinations as normal. However, I don't think I can get to recovery mode. Both volume down/power and volume down/power/home enter download mode to the phone. I tried to flash a stock ROM in Odin, but it failed. Otherwise, it shows a screen that says " Firmware Upgrade encountered an issue. Please select recovery mode in kies and try again" And when I open kies, it just says "connecting" for an extremely long time until it eventually says "Device not responding" and I can't do anything. What do I have to do to fix this? I can't find anything for this phone that has had this problem or knows how to fix it. I've tried a few different things so far but flashing nothing in odin has worked. Any help is appreciated, thanks in advance.
Click to expand...
Click to collapse
Here's the issue: since you have safestrap installed that means you're on the new bootloader. We cannot install anything other than TW based roms from nothing newer than nc5 base. If you can get into download mode, you'll need to flash the full wipe nc5 tar file through Odin. That will get you back on stock and you can re-root from there.
Hightower24 said:
Here's the issue: since you have safestrap installed that means you're on the new bootloader. We cannot install anything other than TW based roms from nothing newer than nc5 base. If you can get into download mode, you'll need to flash the full wipe nc5 tar file through Odin. That will get you back on stock and you can re-root from there.
Click to expand...
Click to collapse
Crap. You're right. I completely forgot about that last night. I was getting frustrated with Hyperdrive because when I was trying to install version 20, the WiFi would never work no matter which modules.zip I flashed.
I got fed up and just wanted to flash something else and I did this without even thinking about it... I can get the phone into download mode, but when I try to flash this in odin, it fails.
I saw someone with the same screen as me with a Note 2 and someone said something about flashing a PIT file or something like that? I think I'm going to look into that next, hopefully I can find some useful links.
riker147 said:
What build were you on before you started? What file are you trying to flash with Odin?
Click to expand...
Click to collapse
Sorry I didn't see this post at first. The file I'm using in Odin is mentioned in the above post. Before I had done anything, I was successfully using Hyperdrive 17.something. I did a factory reset, flashed the Hyperdrive 20 rom, flashed the modules.zip (I used like 3 or 4 different ones and none of them got WiFi to work) and rebooted and let the phone sit for 10 minutes, and when I would try to toggle WiFi, it wouldn't work. To make things worse, every time, when I rebooted, SafeStrap wouldn't load. So I had to go back to the ROM and install Towelroot and root the phone again, then install safestrap and install the recovery again and then I could boot to it. But I could never get the WiFi to work a single time.
Jmick363 said:
Sorry I didn't see this post at first. The file I'm using in Odin is mentioned in the above post. Before I had done anything, I was successfully using Hyperdrive 17.something. I did a factory reset, flashed the Hyperdrive 20 rom, flashed the modules.zip (I used like 3 or 4 different ones and none of them got WiFi to work) and rebooted and let the phone sit for 10 minutes, and when I would try to toggle WiFi, it wouldn't work. To make things worse, every time, when I rebooted, SafeStrap wouldn't load. So I had to go back to the ROM and install Towelroot and root the phone again, then install safestrap and install the recovery again and then I could boot to it. But I could never get the WiFi to work a single time.
Click to expand...
Click to collapse
Use this wifi fix module. It works best for me:
https://www.androidfilehost.com/?fid=23487008491963696
Hightower24 said:
Use this wifi fix module. It works best for me:
https://www.androidfilehost.com/?fid=23487008491963696
Click to expand...
Click to collapse
Thanks for this, but right now I need to be more concerned with actually getting to Safestrap... or stock touchwiz for that matter. Hopefully this will work if I manage to fix the phone.
Jmick363 said:
Thanks for this, but right now I need to be more concerned with actually getting to Safestrap... or stock touchwiz for that matter. Hopefully this will work if I manage to fix the phone.
Click to expand...
Click to collapse
My bad. Here's a link to the tar files. I suggest using the full wipe nc5:
http://forum.xda-developers.com/showthread.php?t=2735172
Hightower24 said:
My bad. Here's a link to the tar files. I suggest using the full wipe nc5:
http://forum.xda-developers.com/showthread.php?t=2735172
Click to expand...
Click to collapse
Using the Full Wipe method on that link, I was able to resolve the problem and at least get back to a working phone. From here I'll use towelroot to root and install safestrap and then install hyperdrive 20 with those modules you linked. To be more specific for anyone reading years from now with the same problem as me, I used odin 1.85 (though many versions work) with the pit file provided from that link with "re=partition, auto reboot and f. reset time" checked in the options. At first, I was having some trouble, but I think it was because the phone had low battery. I plugged it in for a bit, booted it up, and am setting it up right now. Thanks for the help everyone, it's much appreciated. I very much hope that the modules you linked work for me, because if they don't, I have no idea what ROM to use.
I was reading a thread last night where someone listed all of the ROMS working with SafeStrap, but it was from like 2 years ago and almost all of the ROMs had been abandoned.... Is there a more updated list of options? Or just something to look for to make sure a ROM will work right away?
Jmick363 said:
Using the Full Wipe method on that link, I was able to resolve the problem and at least get back to a working phone. From here I'll use towelroot to root and install safestrap and then install hyperdrive 20 with those modules you linked. To be more specific for anyone reading years from now with the same problem as me, I used odin 1.85 (though many versions work) with the pit file provided from that link with "re=partition, auto reboot and f. reset time" checked in the options. At first, I was having some trouble, but I think it was because the phone had low battery. I plugged it in for a bit, booted it up, and am setting it up right now. Thanks for the help everyone, it's much appreciated. I very much hope that the modules you linked work for me, because if they don't, I have no idea what ROM to use.
I was reading a thread last night where someone listed all of the ROMS working with SafeStrap, but it was from like 2 years ago and almost all of the ROMs had been abandoned.... Is there a more updated list of options? Or just something to look for to make sure a ROM will work right away?
Click to expand...
Click to collapse
Hyperdrive and echoerom seem to be the most talked about. I'm running echoe v39.1
Hightower24 said:
Hyperdrive and echoerom seem to be the most talked about. I'm running echoe v39.1
Click to expand...
Click to collapse
So right now things aren't going as smoothly as I would've hoped.... The first time I flashed Hyperdrive and then that modules zip you linked, and the phone got stuck on the Samsung custom screen in some sort of loop. I reset it with odin and just the PDA from the link from before, and I then installed towelroot and safestrap again then flashed hyperdrive and modules and now I'm stuck on the hyperdrive red screen... It's just the boot animation and nothing else. When I take out the battery, the power button does nothing if the phone is not plugged in. When I plug the phone in and hold down the power button, it just shows an empty battery with a loading icon in the middle. I can't do anything else.... I'm going to reset it again now and maybe try installing this echoe rom.... Are you talking about this?
Jmick363 said:
I'm going to reset it again now and maybe try installing this echoe rom.... Are you talking about this?
Click to expand...
Click to collapse
Hightower24 said:
Hyperdrive and echoerom seem to be the most talked about. I'm running echoe v39.1
Click to expand...
Click to collapse
With EchoeRom, where do I find the signal bar fix? Is the wifi fix the thing you linked already? or is it separate from modules zip?
Jmick363 said:
With EchoeRom, where do I find the signal bar fix? Is the wifi fix the thing you linked already? or is it separate from modules zip?
Click to expand...
Click to collapse
Sorry! I had started this reply earlier in the morning then got busy with work. The link for the signal bar fix is in the OP from the forum you found by jds. It's down by the link for v26. I sent you the wifi fix that works for me. If you're going to use v39.1, you will need jrkruse's nk2 patch found here:
http://forum.xda-developers.com/showthread.php?t=2674280
The echoe site is here:
http://echoerom.com/roms/echoefull/s4/i9505/
Flash in this order:
Rom
Nk2 patch (not needed for v29/29.1)
Signal bar fix
WiFi fix
Updated supersu.zip (optional)
Be sure to verify the md5 of the downloads. Good luck!
Hightower24 said:
Sorry! I had started this reply earlier in the morning then got busy with work. The link for the signal bar fix is in the OP from the forum you found by jds. It's down by the link for v26. I sent you the wifi fix that works for me. If you're going to use v39.1, you will need jrkruse's nk2 patch found here:
http://forum.xda-developers.com/showthread.php?t=2674280
The echoe site is here:
http://echoerom.com/roms/echoefull/s4/i9505/
Flash in this order:
Rom
Nk2 patch (not needed for v29/29.1)
Signal bar fix
WiFi fix
Updated supersu.zip (optional)
Be sure to verify the md5 of the downloads. Good luck!
Click to expand...
Click to collapse
No need to apologize!! Your job isn't to monitor me, and I can't thank you enough for all the help. I'm going to give this a shot at some point today, hopefully it'll work. I'll comment back in the thread whatever happens... As you can probably tell, I typically have horrible luck with these things.
So I have had the same issue as the OP after trying to flash to a 5.0 ROM, but my issue is still ongoing, as when I try to flash the stock ROM from this link I get the error that it failed in Odin.
madhavok09 said:
So I have had the same issue as the OP after trying to flash to a 5.0 ROM, but my issue is still ongoing, as when I try to flash the stock ROM from this link I get the error that it failed in Odin.
Click to expand...
Click to collapse
Are you flashing the full wipe? Good download? Check MD5? Using the cable that came with the phone? Try a different USB port?
Sent from my NCC-1701 using Tapatalk.
riker147 said:
Are you flashing the full wipe? Good download? Check MD5? Using the cable that came with the phone? Try a different USB port?
Sent from my NCC-1701 using Tapatalk.
Click to expand...
Click to collapse
Well the OP said he did the wipe with that link I listed, and I would assume it's a good link. I am flashing the full wipe with the PIT file, using the cable that came with the phone, and I have tried using a different USB port. I have tried 3 different MD5 files as well and still have had no luck.
Edit (2:13 PM Eastern): Had the wrong file after some digging, and got the NC5 instead of the MK2. Phone is booting normally. Thanks for the help.

S4 MDK Soft brick?

So been on HD since the beginning and had no issues until today.
Installed rls21 per the OP and everything ran pretty smooth. Was unable to get HD Tweaks to load
and it would cause settings to FC then touchwiz home would FC.
I went into recovery, cleared cache and rebooted. Still had the same issues. Re-installed the rom from
the beginning and still same problem.
Downloaded new copies of rls21 and the UI and installed. Now my phone wont boot past the samsung logo with the lock.
I tried to odin back to stock and it is still stuck at the logo.
I can get into recovery and the download screen but cant get anything to boot after that.
It will let me run aroma and install any build but wont boot the OS.
Seems I've lost root as well.
I'm on an MDK build. Please someone help me figure this out...
Update: Tried re-partitioning and loading stock MDK firmware and also tried to load stock recovery via Odin.
Now I can still get into download mode, phone wont boot past samsung screen and when i try to enter recovery I have the yellow triangle and a statement about unauthorized software...
TJ2713 said:
So been on HD since the beginning and had no issues until today.
Installed rls21 per the OP and everything ran pretty smooth. Was unable to get HD Tweaks to load
and it would cause settings to FC then touchwiz home would FC.
I went into recovery, cleared cache and rebooted. Still had the same issues. Re-installed the rom from
the beginning and still same problem.
Downloaded new copies of rls21 and the UI and installed. Now my phone wont boot past the samsung logo with the lock.
I tried to odin back to stock and it is still stuck at the logo.
I can get into recovery and the download screen but cant get anything to boot after that.
It will let me run aroma and install any build but wont boot the OS.
Seems I've lost root as well.
I'm on an MDK build. Please someone help me figure this out...
Update: Tried re-partitioning and loading stock MDK firmware and also tried to load stock recovery via Odin.
Now I can still get into download mode, phone wont boot past samsung screen and when i try to enter recovery I have the yellow triangle and a statement about unauthorized software...
Click to expand...
Click to collapse
Did you also flash the stock MDK recovery as well? Which package did you flash no wipe or full?
Illogi.xbone said:
Did you also flash the stock MDK recovery as well? Which package did you flash no wipe or full?
Click to expand...
Click to collapse
I flashed pretty much every file I could in odin to restore mdk. Failed to notice all the file sizes on every site I downloaded
from were 8MB or smaller. Am downloading the full 1.83GB MDK system file now to see if that will work.
TJ2713 said:
I flashed pretty much every file I could in odin to restore mdk. Failed to notice all the file sizes on every site I downloaded
from were 8MB or smaller. Am downloading the full 1.83GB MDK system file now to see if that will work.
Click to expand...
Click to collapse
You probably got the MD5 file I have done that before.
So I was unable to Odin back to MDK. Think I lost root and my boot image. I was able to Odin to the newest build fnk1 which is MDF.
Guess I'm gonna figure out this whole safe strap game now :*(
TJ2713 said:
So I was unable to Odin back to MDK. Think I lost root and my boot image. I was able to Odin to the newest build fnk1 which is MDF.
Guess I'm gonna figure out this whole safe strap game now :*(
Click to expand...
Click to collapse
Well good news is HD is good for Safestrap =D
Illogi.xbone said:
Well good news is HD is good for Safestrap =D
Click to expand...
Click to collapse
Yeah but cant get rls 21 to work without tons of fc's. So now im no better than where i started since safestrap blows and i'm back on rls20
TJ2713 said:
Yeah but cant get rls 21 to work without tons of fc's. So now im no better than where i started since safestrap blows and i'm back on rls20
Click to expand...
Click to collapse
You could always go stock rooted until they get SS working with custom kernels. Just sayin.
Illogi.xbone said:
You could always go stock rooted until they get SS working with custom kernels. Just sayin.
Click to expand...
Click to collapse
Been on hyperdrive for almost 2 years. The concept of stock is just gross lol
TJ2713 said:
Been on hyperdrive for almost 2 years. The concept of stock is just gross lol
Click to expand...
Click to collapse
I know the feeling, personally with MDK I prefer lollipop, but I use S Translator all the time now (Dating a Chinese girl) and the optical reader and I have found 0 apps that could compare for free so HD is my DD for now until we get an S4 Lollipop rom with those included.

[ROM] OF6 FULL tar.md5 file Odin Flashable only

i managed to get the OF6 sprint full rom file through kies.
this is only to be flashed using odin in the ap slot.
you will probably lose root and your custom recovery.
you may be able to root it and restore the data . That up to you to try.
This is the Sprint version Only!
here is the link: if someone wants to provide a mirror that would be appreciated.
Disabling 'Reactivation Lock' from 'Security' in the settings allowed me to root and add a custom recovery (TWRP).
your on your own from here!
https://onedrive.live.com/redir?resid=CD08CE789EB6B040!1155&authkey=!AIOZNh5nLeYDbcs&ithint=file,md5
here is another link thats a zipped MD5.tar file. this must be unzipped before putting the file into odin ap slot . (thanks to itskapil for the link)
http://www.theandroidsoul.com/download/download-sprint-galaxy-s5-android-5-0-2-update-odin-tar-file/
It's always great to have a TAR file on PC. Thanks!
But btw, this is Android 5.0 update, right? Have read on android blogs that OF6 has been 5.1 update for T-Mobile Galaxy S6 sets. So..
Okay, it's 5.0.2. Brings Reactivation lock.
itskapil said:
It's always great to have a TAR file on PC. Thanks!
But btw, this is Android 5.0 update, right? Have read on android blogs that OF6 has been 5.1 update for T-Mobile Galaxy S6 sets. So..
Okay, it's 5.0.2. Brings Reactivation lock.
Click to expand...
Click to collapse
Yes it's still 5.0
Sprint GS5 Moars 6.2
Any special features or affects on this update? Thanks for taking the time doing this for us
Sent from my SM-G900P using XDA Free mobile app
Son Rise said:
Any special features or affects on this update? Thanks for taking the time doing this for us
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
this
http://support.sprint.com/support/a...pdateTheSoftwareVersionOnYourSamsungGalaxy#!/
First is this a necessary update? Second does one have to update to OD3 first before doing the update. I'm still on OA6
Cmicasa the Great XvX said:
First is this a necessary update? Second does one have to update to OD3 first before doing the update. I'm still on OA6
Click to expand...
Click to collapse
no you dont have to update and no it isnt necessary. but if you are on stock OA6 I would take to guess that this rom is 5 months newer with improvements in alot of areas. they claim its for factory reset protection (so someone cant steal your phone and just factory reset it and it theirs now) and for reactivation protection (same thing so noone can reactivate the phone and make it theirs)
if i was on straight stock i would update. if i was on a stock rooted i would either try and root it or wait for someone to root the tar file and make it flashable through recovery.
thats my take on it.
cool... thanks. I like the security features, but at the same time I may wait till the new Moar comes out to do the work.
Is there a new radio and modem version with this update?
BrickedHouse said:
Is there a new radio and modem version with this update?
Click to expand...
Click to collapse
yes its the full rom, modem, and firmware
Robalboa said:
yes its the full rom, modem, and firmware
Click to expand...
Click to collapse
Thank you for this and by chance has anyone seen a firmware/modem update only for OF6 yet?
Edit: Found! Thanks tdunham - https://www.androidfilehost.com/?w=files&flid=21717
I was just gonna show you that. Lol
Sprint GS5 Moars 6.2
Has anyone successfully loaded a custom recovery and possibly one of the available OA6 ROMs after updating to this full tar?
I know there are separate modem and firmware files, but I was just curious if anyone has tried to go there from full stock.
DurhamHusker said:
Has anyone successfully loaded a custom recovery and possibly one of the available OA6 ROMs after updating to this full tar?
I know there are separate modem and firmware files, but I was just curious if anyone has tried to go there from full stock.
Click to expand...
Click to collapse
Yes. In fact, I did a full rom install, with nand erase all (after a bad flash), and I still went back to OA6 and OD3 stock deodexed roms.
Flashing TWRP from Odin works fine after flashing OF6 or OD3. I also used the CF one click root method, and that also worked for me.
Everything I did was in Odin 3.10.6.
Chainfires auto root makes odin complains about the recovery and shows 'fuse>3', which (I assume) means I've already burnt thru three of the 400+ fuses in the phone (kernel, recovery and probably rooting). I've tried odin 3.10.6 and the version that comes with chainfires auto root. Towelroot v3 says my phone isn't supported, even when using the command mod options.
I'll boot back into Windowz and try this a few more times. I don't see/know how joshdv rooted his phone...
edit: let's add insult to injury. I can't downgrade the firmware/OS to OA6, says it fails OS version.
joshdv said:
Yes. In fact, I did a full rom install, with nand erase all (after a bad flash), and I still went back to OA6 and OD3 stock deodexed roms.
Flashing TWRP from Odin works fine after flashing OF6 or OD3. I also used the CF one click root method, and that also worked for me.
Everything I did was in Odin 3.10.6.
Click to expand...
Click to collapse
@joshdv
Maybe it would help if you posted the link to the autoroot tar and any special steps you took to get it working.
Buddlespit said:
Chainfires auto root makes odin complains about the recovery and shows 'fuse>3', which (I assume) means I've already burnt thru three of the 400+ fuses in the phone (kernel, recovery and probably rooting). I've tried odin 3.10.6 and the version that comes with chainfires auto root. Towelroot v3 says my phone isn't supported, even when using the command mod options.
I'll boot back into Windowz and try this a few more times. I don't see/know how joshdv rooted his phone...
edit: let's add insult to injury. I can't downgrade the firmware/OS to OA6, says it fails OS version.
Click to expand...
Click to collapse
Yes, you're stuck on the newer firmware now.
tdunham said:
Yes, you're stuck on the newer firmware now.
Click to expand...
Click to collapse
Ya, before I flashed this, I knew I was probably stuck with OF6 and that there currently wasn't a reliable method to get root. Now, it's a waiting game to see if someone comes up with a method/hack to root this. GooooOOOOO CHAINFIRE!!!
Buddlespit said:
Ya, before I flashed this, I knew I was probably stuck with OF6 and that there currently wasn't a reliable method to get root. Now, it's a waiting game to see if someone comes up with a method/hack to root this. GooooOOOOO CHAINFIRE!!!
Click to expand...
Click to collapse
Depends how long you're willing to wait and if you want to keep the warranty bit untripped.
If it doesn't matter, you can still flash custom recovery in odin and any one of the pre-rooted custom or stock roms that will run on the lollipop bootloader.
I got root by just installing custom recovery and flashing super su. zip
Sent from my SM-G900P using Tapatalk
lascoul said:
I got root by just installing custom recovery and flashing super su. zip
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
Link for Super user zip???

[Odin][Odin Flashable - Bootloader/Modem][G900TUVS1FOL1]Updated 2/1/16

Made this for myself, and noticed other people wanting it. If you are in anyway unsure of what your doing, please don't flash Odin packages. I'm not on here all that often to answer questions, so please refer to aaricchavez's thread as I'm sure the same questions will be asked.
I was able to flash by pulling the battery, then vol-dwn + home + pwr. Choose vol-up for downloader and flash. Worked on the second try. See screenshots bellow.
What you do to your phones on you, consider this: Warning flashing Bootloader/Modem/ FULL FIRMWARE LOLLIPOP
Updates seem to work best after a shutdown and battery pull. If camera stops working, clear your caches and reboot.
Flashable in Odin:
Bootloader/BL:
FOL1 Bootloader
FOL1 Bootloader
Phone/CP:
FOL1 Modem
FOL1 Modem
TWRP Recovery:
Recovery
My Customized Recovery:
2.8.7.0 Recovery
I have tried numerous times to install bootloader but it stays on dob1. I got the modem just fine. Don't understand why
Sent from my SM-G900T using Tapatalk
I've tried updating my bootloader& modem as well as the firmware in Odin 3.09 & 3.10 & all it keeps doing is failing can someone PLZ help
The only way I've been able to flash the last few modems and bootloaders is by pulling the battery, and even then It may take a few times. DOB1 took me 4 or 5 times.
And if your wondering, the modems a huge improvement. At least for me anyways. I'm up in the hills of the SF east bay and got very spotty LTE before, no longer an issue.
Could I use flashfire to flash the boot and modem?
Edit, I know it's possible to flash full firmwares but not sure about boot and modem
zounduser said:
Could I use flashfire to flash the boot and modem?
Edit, I know it's possible to flash full firmwares but not sure about boot and modem
Click to expand...
Click to collapse
Bootloader no modem yea
Tried using flashfire to install the modem but its not working. Still on ob1
Sent from my Samsung Galaxy S5 using Tapatalk
Can I flash just the modem if I'm already rooted using a CM12 ROM (Temasek unofficial)?
Does flashing a full stock ROM immediately update the bootloader and modem?
Can I flash just the modem if I'm already rooted using a CM12 ROM (Temasek unofficial)?
Click to expand...
Click to collapse
Yup. On rare occasion partitions respond in strange ways to odin flashing, ie. partitions other than what you're flashing become unwriteable. But for the most part that's a rarity.
Does flashing a full stock ROM immediately update the bootloader and modem?
Click to expand...
Click to collapse
Depends on your existing version, and the version your upgrading to, but with rare exception yes.
Is this the newest BL and modem for our phones?
highaltitude said:
Is this the newest BL and modem for our phones?
Click to expand...
Click to collapse
As of 10/10/15 FOG6 is, I just uploaded.
thanks for this. just realized today there was an update.. only a one letter difference, took a while to realize it!
can someone upload the new one?
Just wanted to add this. Was having a hard time flashing BL and CP
1. removed the sd card (tmobile thing I read somewhere)
2. took off the md5 off the file name so it was just a .tar file
3. put both files in to oden 3.11 and on the first flash had auto reboot NOT checked, then pulled the USB cable and pulled Battery.
4. then booted to download mode with cable in and and battery in and reflashed with auto reboot checked.
I installed omega rom v20 and I had a bootloop because I didnt have a 6.x.x bootloader and modem.
I came from 4.x.x and I almost just installed a stock 6.x.x to get the updated BL and CP, then root that.
I have had good luck with omega, but I use TB to clean out all the Samsung stuff. I purchased the App for $7, worth every penny.

Categories

Resources