Related
has anyone looked into the possibility or upgrading the LCD in these to a higher quality one? that would solve many of my issues with the device. I see they have been researching this on the gtablet forum but search didnt find any information on this site for the 101....
anyone know enough about this to recommend a plug n play replacement?
Never done it on a tablet, but on a laptop you typically want to aim for the same or lesser resolution unless the video supports higher (on this would have to be exact same resolution probably) and you want a backlight that has similar power characteristics. Then you need the frame to be the exact same physical size, frame and thickness included. Good luck, lemme know what yah find id like a nice IPS or S-IPS in mine.
Hi, a normal laptop 1024x600 resolution 10.1 panel will work, it used standard connections. I have tried that with a pixel qi. It works but no touch obviously. However the capacitive touch panel is stuck on the screen so you will need to purchase an extra touch panel to stick on top of the lcd screen you will buy. However i dont think there is any ips 10.1 inch screens. These are made customely for devices i believe.
At its most expensive it is a $350 device (101 - 16GB). Completely not worth it financially to upgrade the LCD. You would be better off spending that money to buy a Adam with the Pixel Qi screen if you were so inclined to have a higher quality capacitive screen. It would probably cost less too.
ExploreMN said:
At its most expensive it is a $350 device (101 - 16GB). Completely not worth it financially to upgrade the LCD. You would be better off spending that money to buy a Adam with the Pixel Qi screen if you were so inclined to have a higher quality capacitive screen. It would probably cost less too.
Click to expand...
Click to collapse
at 1.5lbs and $500 ill pass on the adam. you can purchase better lcds for ~$100 thats still cheaper than the adam also... but finding that the touch panel is glued to the lcd kinda ruins this idea. oh well CES next week will have plenty of alternatives to the 101 im sure
Hi there!
I'm from the Sony Xperia S section, but I have a question.
My friend's i9300 fell out of his pocket when he was just getting in his car. Somehow, he drove over it, stopped the car on the driveway and went to see what he drove over.
The screen -- all, glass, the AMOLED screen and the digitizer -- is completely shattered, not working at all. The phone, however, seems perfect inside (also boots up and connects to the PC correctly).
Not rooted, no bootloader unlock (or whatever that's called on these sides of XDA ), nothing. He's a noob user, only made calls, SMS and occasional pictures.
So he (having lots of cash) said if I can fix it, but if not, I can keep it. We saw that a new digitizer/screen/glass combo costs around 140$, used about 130$ (take into account that this is central europe, not USA, Canada, UK or Germany -- the delivery fees from anywhere but Slovenia are 50€ for each package).
In the end, I get to keep the phone. It's a nice piece of hardware and I'd like to see how it'd do as a daily driver and to see how development is going around here (seeing as you people already have PA 3+ and other goodies). But damn, that's just too expensive for a screen (note that a Xperia S screen+digitizer+glass costs ~30$, and this one has more ppi at only 4.3").
My question to you is, how long do I have to wait for working pieces of hardware to emerge that will cost around 60$? Note that a new Galaxy S2 screen costs around 60$ and last year's first Sony flagship screen costs 30$.
I'm thinking one more year, maybe?
Thanks a lot for any help at all (PLEASE, make this a discussion thread, I want to read your opinions and speculation ),
--someone755
P.S.
Also, if my 'one year' theory turns out to be true, it'll be just in time for a replacement phone. Would you guys recommend the S3 in 2014 (or even in 2013)?
You must be thinking that I'm going mad with using a 2012 phone in 2014-15.
P.P.S.
If anyone knows where the SMS messages are stored and can tell me how to get them (IF that's even possible) off the phone without the need for a screen, that'd be great... It just seems like I at least own the SMS messages to the guy...
P.P.P.S.
The notification light is blinking in blue... Does that mean something is wrong or is it just a notification...? I figure the latter, since I heard the sounds of it booting to Android...
Also, there's this weird water-y sound effect when I press the home button. Could that be the famous lockscreen?
Sorry for being a pain, I'm just visiting to see if it's all worth it (might sell the parts if the components never get any cheaper)...
Notification blue, is just that.
Sms, you could possibly get an hdmi cable if you are sure about fixing it in the long run and you will be able to use the phone through your tv...until you wait for a screen.
Sent from my GT-I9300 using Tapatalk 2
Thanks for the reply.
Well I don't feel like buying a new cable adapter every time I have a phone to fix, plus there's no way to control the screen because the digitizer is also broken.
I don't really care all that much for fixing the phone, I'd just like to hear your opinions on how long until prices go down to see if fixing is even worth it...
someone755 said:
Thanks for the reply.
Well I don't feel like buying a new cable adapter every time I have a phone to fix, plus there's no way to control the screen because the digitizer is also broken.
I don't really care all that much for fixing the phone, I'd just like to hear your opinions on how long until prices go down to see if fixing is even worth it...
Click to expand...
Click to collapse
You can plug a mouse in too
The price sounds about right. I struggle with an Xperia screen being $30 though. What? The Screen is always the most expensive component. Digitisers / Glass is always cheap £15, £20 for most phones but screens (LCD, AMOLED etc) are always expensive.
I don't see these components coming down. There will be a need for them for years as some people will run their Galaxy for 3+ years.
In 5 years, the prices could even go up due to rarity
But if the USB port is already connected to a screen, there isn't any more place for a mouse...
For the Xperia S screen, I found you a link: http://www.etradesupply.com/oem-sony-xperia-s-lt26i-lcd-screen-and-digitizer-assembly.html So I missed it by $10...
Well I also thought about the price increase, but I'm seeing the S2 as an example... It started out at about $100 but nowadays you get one for $60...
I guess the best thing is to wait, no?
Wait only if you don't mind no supply or a price increase .
Trade that off versus your thought that its overpriced at present .
jje
Well if prices for the screen increase, thee prices for the other components should also increase, right? In that case, if prices don't fall, I can sell what's left of the phone... Right...?
Since everything is working perfectly, I don't see why not...
someone755;42934541I found you a link: [url said:
http://www.etradesupply.com/oem-sony-xperia-s-lt26i-lcd-screen-and-digitizer-assembly.html[/url] So I missed it by $10...
Click to expand...
Click to collapse
Ah ok. It's an LCD screen though, not AMOLED. ...and much smaller. so it's not a fair comparison
Oh, I completely forgot about the Amoled screen...
Though isn't it more expensive to make a screen with more ppi, albeit smaller? Would be more logical (as it's harder and more complex). But then again, the way Amoled pixels are arranged is also the most complex thing ever...
Quoting GSMarena
For the S2; Super AMOLED Plus capacitive touchscreen, 16M colors | 480 x 800 pixels, 4.3 inches (~217 ppi pixel density)
And for the S3; Super AMOLED capacitive touchscreen, 16M colors | 720 x 1280 pixels, 4.8 inches (~306 ppi pixel density)
I've also read a lot that the S2's screen wasn't as breakable as the S3's. Could that be one of the causes that the S2's screens started off way cheaper?
someone755 said:
Well if prices for the screen increase, thee prices for the other components should also increase, right?
I doubt it .
jje
Click to expand...
Click to collapse
Well why not?
If the screens become rare, shouldn't that also mean that, say, vibrators would also become rare?
I've been thinking about connecting the thing to a screen and using it as a poor pc for media (movies, pics, etc.) or a small personal file server. In theory, that could work, since this still is a pretty powerful device...
Also, I've seen some Chinese sites selling fake screens and digitizers. I have yet to find a version that is compatible with the i9300... Again, would be grateful for any links
Screens are the most common things to need replacing due to accidental breakage
Sent from my GT-I9300 using Tapatalk 2
For those of you who've replaced your screens either DIY or via LG warranty replacement...please post how your screen quality and viewing angles compare to the original LCD.
I'll start...
1. On my Current G2, I had a perfect screen. Perfect viewing angles and excellent image quality with no defects
2. Ebay Replacement screen #1 had dead pixels and Mira lines.
3. Ebay replacement screen # 2 had horrible color. Almost black and white
4. Amazon replacement screen has great color & image quality but lesser degree of viewing angles.
It's hard to explain but easy to compare to other G2s and phones when you compare side by side.
After all these screen swaps in the last couple months I've decided to keep this screen and use the phone as is.
How does your replacement screen compare to the original one?
I got LG performed a "total refurbished" when I dropped and shattered my screen.
It came back and looked like new, no difference to the original.
After a shattered screen i got it replaced.two months waoting time.now have jdi panel but brightness is very low and have lots of screen bleed around the edges.the repairman did not do a good job but the panel itself is of lower quality.color and contrast ok but luminosity is about 70%of the original...not happy but no money for yet another panel...
Conclusion:dont drop the phone...
After having touch screen issues on my phone (no-touch zone, ghost touches), I bought a replacement screen for my D800 off eBay.
Got it replaced and so far, the quality (colours, brightness, touch accuracy) is very good. I'd say the screen is slightly more yellow than my original screen but it's by no means an issue.
The screen I got for my "new" Z3, is full of problems. It has press marks(areas on the screen which appear brighter/whiter) and the screen "flickers" on high brightness. My friend can't see it well, but I can very clearly see the screen going bright->dark->bright->dark slightly and very quickly.
Dropped mine and got it replaced at a cheap place in Bangkok.
Colours are the same, viewing angles are not as good, but
those doesn't matter to me.
Been 2 months dropped phone again, screen shattert again...
Biggest supprise: Touch is still working perfectly! Seems like the cheap replacement screen doesn't have the NoGap technology like the original ones haha. Seems like win win to me!
laboratik said:
After a shattered screen i got it replaced.two months waoting time.now have jdi panel but brightness is very low and have lots of screen bleed around the edges.the repairman did not do a good job but the panel itself is of lower quality.color and contrast ok but luminosity is about 70%of the original...not happy but no money for yet another panel...
Conclusion:dont drop the phone...
Click to expand...
Click to collapse
Thanks for the responses guys and sorry to hear about your screens.
Made a new poll. Please participate.
I'm trying to make a case that there are different versions of LCD panels made by different manufacturers.
They don't advertise which is which but we're starting to notice now that we're having out screens replaced.
I replaced my LG D800 screen with one from Amazon and the colors are slightly darker but other than that no big deal. I didn't do a good job with the replacement so there is definite light bleed on the edges and after four months of using it im getting ghost touches if I press on the lower portion of the screen. Don't think it's quite worth the $80 replacement to try again and get it right, just something I'll deal with until a new phone comes out and I can get it replaced all together.
Similar experience to laboratik except the repair was done at LG so the workmanship is good. But it is jdi panel and darker than the original.
Thank you guys for the responses. This thread should be helpful to others in our same situation.
The sad fact is that the market is flooded with aftermarket screens made by who knows.
Just compared my screen with the S6 Edge and have to say I'm very impressed with the image and color on this replacement screen however that's where the buck stops.
The reduced viewing angles are tolerable at best. I'd hate to remove this replacement screen send it back all over again...roll, dice pray I get a perfect match but unless I'm removing it from a G2 myself I'm starting to believe it's not likely it'll happen.
Check out this review on Amazon re: the screen I have.
This guy nails my current situation
http://www.amazon.com/gp/aw/review/..._dp_cr?cursor=3&qid=1428191059&sort=rd&sr=8-1
tiguy99 said:
For those of you who've replaced your screens either DIY or via LG warranty replacement...please post how your screen quality and viewing angles compare to the original LCD.
I'll start...
1. On my Current G2, I had a perfect screen. Perfect viewing angles and excellent image quality with no defects
2. Ebay Replacement screen #1 had dead pixels and Mira lines.
3. Ebay replacement screen # 2 had horrible color. Almost black and white
4. Amazon replacement screen has great color & image quality but lesser degree of viewing angles.
It's hard to explain but easy to compare to other G2s and phones when you compare side by side.
After all these screen swaps in the last couple months I've decided to keep this screen and use the phone as is.
How does your replacement screen compare to the original one?
Click to expand...
Click to collapse
I got a few of them from eBay, I can link you the buyer if you want, I've sold them and they are close to OEM, they only have one MAJOR flaw, they are thicker. While you'd think this wouldn't be an issue, they are thick enough to not be able to slip into most cases, so it's annoying.
http://www.ebay.com/usr/wholesaleblimited?_trksid=p2053788.m1543.l2754
That's the ebay seller I use for replacement parts.
So far the screens have been OEM quality( G2, GPro, AHD) I've bought a few from there, and they all have great quality, except for the thickness, they all seem to be thicker, this is probably due to it not being real gorilla glass, and just a knock off lol.
it looks like my replacement screen for LG service center has slightly lower sunlight legibility than original,
I dont know which panel is this, but brightness is reduced
sameerm02 said:
it looks like my replacement screen for LG service center has slightly lower sunlight legibility than original,
I dont know which panel is this, but brightness is reduced
Click to expand...
Click to collapse
After removing the Amazon screen and reinstalling the original one, I notice the Amazon one has slightly higher ppi/contrast with a smoother looking picture....WTH
Now if I can have that with the original screen's viewing angles I'd be golden....
Oh well....time to pack it back and return it back...will report back shortly
sjk971005 said:
After having touch screen issues on my phone (no-touch zone, ghost touches), I bought a replacement screen for my D800 off eBay.
Got it replaced and so far, the quality (colours, brightness, touch accuracy) is very good. I'd say the screen is slightly more yellow than my original screen but it's by no means an issue.
The screen I got for my "new" Z3, is full of problems. It has press marks(areas on the screen which appear brighter/whiter) and the screen "flickers" on high brightness. My friend can't see it well, but I can very clearly see the screen going bright->dark->bright->dark slightly and very quickly.
Click to expand...
Click to collapse
strange, that happens to me also, totally stock phone, no replacements at all
sent from the grey stuff inside my skull
Silentwidow said:
I got a few of them from eBay, I can link you the buyer if you want, I've sold them and they are close to OEM, they only have one MAJOR flaw, they are thicker. While you'd think this wouldn't be an issue, they are thick enough to not be able to slip into most cases, so it's annoying.
That's the ebay seller I use for replacement parts.
So far the screens have been OEM quality( G2, GPro, AHD) I've bought a few from there, and they all have great quality, except for the thickness, they all seem to be thicker, this is probably due to it not being real gorilla glass, and just a knock off lol.
Click to expand...
Click to collapse
I bougth several screens from that seller... but with frame... i have not noticed about the "thicker".
But, is not just knock off, my screens has knock on... I think you have to run the "update touch menu" in service menu...
Hye guys. Im sorry if im in the wrong thread. Right now im in need for lg g2 d802 lcd full assembly replacement but im in tight budget right now. I can afford max for 60 bucks. ( im still depressed about losing my job though lol ) I've found several replacement at ebay from China that is under my budget but im in doubt if it is quality enough to be acceptable to be use in this great phone? I've heard about "crazy touch" issue too so im afraid if im not lucky enough to get one of those. Anyone here have experienced with these full lcd assembly from ebay? I would like to know if all those claim are true or not.
Anyway this is one im talking about - http://www.ebay.com.my/itm/301568732266?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
kopter36 said:
Hye guys. Im sorry if im in the wrong thread. Right now im in need for lg g2 d802 lcd full assembly replacement but im in tight budget right now. I can afford max for 60 bucks. ( im still depressed about losing my job though lol ) I've found several replacement at ebay from China that is under my budget but im in doubt if it is quality enough to be acceptable to be use in this great phone? I've heard about "crazy touch" issue too so im afraid if im not lucky enough to get one of those. Anyone here have experienced with these full lcd assembly from ebay? I would like to know if all those claim are true or not.
Anyway this is one im talking about - http://www.ebay.com.my/itm/301568732266?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
Click to expand...
Click to collapse
That one almost certainly looks like it will be a low quality replacement you will be unhappy with.
My personal opinion, if you want a full frame screen replacement....at least get one with the LG logo.
Saw one on ebay for 59.00 last night. The seller claimed to test them before they ship.
Http://www.ebay.com/itm/181670823997?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
Not sure which model you have but make sure you confirm with the seller before you bid
i have ordered my replacement screen with frame from etradesupply.com should be reaching me in 5 days time.. Will report back. Got it for $60.
tiguy99 said:
That one almost certainly looks like it will be a low quality replacement you will be unhappy with.
My personal opinion, if you want a full frame screen replacement....at least get one with the LG logo.
Saw one on ebay for 59.00 last night. The seller claimed to test them before they ship.
Http://www.ebay.com/itm/181670823997?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
Not sure which model you have but make sure you confirm with the seller before you bid
Click to expand...
Click to collapse
That one looks legit to me but i need to ask the seller first. Its going to be so many question from me. Lol.
Btw my phone model is D802.
somberi said:
i have ordered my replacement screen with frame from etradesupply.com should be reaching me in 5 days time.. Will report back. Got it for $60.
Click to expand...
Click to collapse
Once you got it could you reviewed it here? I might order from etradesupply .com too.
kopter36 said:
That one looks legit to me but i need to ask the seller first. Its going to be so many question from me. Lol.
Btw my phone model is D802.
Once you got it could you reviewed it here? I might order from etradesupply .com too.
Click to expand...
Click to collapse
My shipment status says expected delivery Wed, Apr 15. Hope there are no more delays. Will keep the thread posted on how the screen performs.
Hi there.
My cousin dropped his phone and completely shattered the front glass. Phone still worked fine though. Went shopping for a replacement LCD+Touch glass part and finally found a shop which charged him about 60 bucks (this included service).
The display is not terrible, but it's definitely a no-brand spare, it's darker, has a blue-ish tint to it and on top of that, it seems to run on a lower resolution. It works fine for looking at memes on social media and stuff, but text and icons look jagged. The system effectively believes it's running untouched at 1080x1920 (checked via "wm size"), but the display itself is pushing less pixels than that.
He can live with that, though, so here comes my question point for discussion: Is there any practical way to measure the actual, physical resolution of this display?
I just thought it would be nice for Android to render everything at this display's native resolution. Jagged edges wont be gone, but I'm pretty sure using appropiate graphics assets and proper density is better than whatever downscaling is happening here.
Regards.
Get a magnifying glass and count the number of physical pixels.
All jokes aside, if you're rooted you can first try figure out what panel you have with "dmesg | grep panel" in terminal.
Other than that you should go back to the store your cousin got the screen repaired and demand an explanation from them and a refund.
Attached is the output I get on my own Z2 which has a OEM display. I didn't need root for this hehe. Lets see what it looks like on his phone next time I meet with him.
I really think requesting a refund is out of the question, it's been a few weeks since the repair took place and service technicians are a PITA to deal with 'round here.
Anyhow, what I'm worried about the most is software updates on the repaired Z2. Chinese knock-off parts are known to stop working or straight out break when treated with non-factory default firmware. It's sitting on 5.1 as we speak.
Update: The replacement display works after an upgrade to M build .291, the phone is now rooted and equiped with TWRP. I'll try to run
Code:
wm size 540x960
and
Code:
wm density 240
on it and see what happens. It could very well be a half-resolution panel, or a FWVGA one, we'll see.
UPDATE #2: The display looks worse after the fact. There's no saving it haha.
you buy a stock dislay from Sony or others?
Are they jagged or actually interlacing? I got a replacement that looked jagged but then I noticed they were actually interlacing which kind of looks like every other pixel is tearing slightly.
That gave it a jagged look. So it may be the right resolution, but just a faulty LCD. I was sent a new screen on request (ebay).
Either way you should get a replacement.
i got some low res display cheap from china. it was horrific resolution.. device also crashed ala bluescreen-of-death, especially when plying blossom blast or watching fb video. i ordered a display from eu on ebay, and now i'm happy again. and so is the device.
Same here and how to make things better
Flash kcal flashable mod and then use these settings R=255
Green=250 blue=245
Saturation =65
Value=135
Contrast =135
Ok turns out he broke the display again. This second replacement actually looks great, there's little difference when compared side-by-side with my Z2. Good thing he's no longer doomed to a bad display haha.
xRevengerZee said:
Flash kcal flashable mod and then use these settings R=255
Green=250 blue=245
Saturation =65
Value=135
Contrast =135
Click to expand...
Click to collapse
Not sure how this is supposed to help with resolution. Perhaps it would help with the blue tint, but the stock white balance does this as well.
Da Iceman said:
Are they jagged or actually interlacing? I got a replacement that looked jagged but then I noticed they were actually interlacing which kind of looks like every other pixel is tearing slightly.
That gave it a jagged look. So it may be the right resolution, but just a faulty LCD. I was sent a new screen on request (ebay).
Either way you should get a replacement.
Click to expand...
Click to collapse
Now that you mention it, that could explain the scanlines effect when looked up close.
rbrandser said:
i got some low res display cheap from china. it was horrific resolution.. device also crashed ala bluescreen-of-death, especially when plying blossom blast or watching fb video. i ordered a display from eu on ebay, and now i'm happy again. and so is the device.
Click to expand...
Click to collapse
Glad to know that. Who is this "eu"? Europe? Lol I'm out of touch here. Glad to know you got a fine display.
I REALLY hope to never ever need to go through display replacement lottery.
Compared to other devices, this Xperia is not hard to repair, and there are cheap spare parts, and quality parts available from a number of EUropean sellers.
Anyway, it's Friday, good to see this forum again, it's really a nice place.
Oh yeah, my daughter after terrorizing me for years finally made me buy her an iPhone, well... I'm waiting for replacement display nr5 for this 5s in a year now. Lol.
Pixelado said:
Hi there.
My cousin dropped his phone and completely shattered the front glass. Phone still worked fine though. Went shopping for a replacement LCD+Touch glass part and finally found a shop which charged him about 60 bucks (this included service).
The display is not terrible, but it's definitely a no-brand spare, it's darker, has a blue-ish tint to it and on top of that, it seems to run on a lower resolution. It works fine for looking at memes on social media and stuff, but text and icons look jagged. The system effectively believes it's running untouched at 1080x1920 (checked via "wm size"), but the display itself is pushing less pixels than that.
He can live with that, though, so here comes my question point for discussion: Is there any practical way to measure the actual, physical resolution of this display?
I just thought it would be nice for Android to render everything at this display's native resolution. Jagged edges wont be gone, but I'm pretty sure using appropiate graphics assets and proper density is better than whatever downscaling is happening here.
Regards.
Click to expand...
Click to collapse
Can you send me a link for the original replacement display?
napyaninja said:
Can you send me a link for the original replacement display?
Click to expand...
Click to collapse
Sorry, he bought his display from a brick and mortar store, I have no idea where they get their parts from
Hello, there.
Unfortunately, I've dropped my mi mix 3 and I was looking to a new screen.
Looking around I've found many offers with a wide range of prices.
The question is that the Mi Mix 3 feature a Samsung Amoled 6.39 inch but it is impossible to find, everywhere I'm finding an LCD replacement. Can someone help me out?
Plus, I was a bit worried about the screen replacement procedure but then I saw this video which takes a totally different approach and made the whole thing much easier...
https://www.youtube.com/watch?v=wl2aK5wCBAI
Still, I can't find the Amoled version anywhere but only the LCD version...
Cheers
Specialosio said:
Hello, there.
Unfortunately, I've dropped my mi mix 3 and I was looking to a new screen.
Cheers
Click to expand...
Click to collapse
Goodluck https://www.witrigs.com/oem-screen-replacement-with-frame-for-xiaomi-mi-mix-3-black
Hi, i searched on aliexpress, there are lots of options but it is $100+, so in my case I ordered 6.39 lcd display, and it looks better than other analogs, costs 45 usd but it has a special plastic spacer under the display, so it sticks up a bit more, looks fine... On aliexpressI think itis 3 options lcd, led and amoled... No clue what is the one in middle. I bought mine from chila lcd seller
Upd: I think 100+ is for original there, not 'oem', but not sure
I try to order one (100+$) but the quality was awefull. some part of the screen was unreponsive.
I bought one from second hand market. Under warranty and never opened for -300$
I had the same problem, dropped my phone and screen replaced with original. Contact with this adress maybe you can order original one. Genpa is authorized service in Türkiye for Xiaomi.
https://www.genpa.com.tr/hakkimizda/eng
https://www.genpa.com.tr/iletisim-formu
I bought the witrigs one. It certainly seems genuine to me. I'm happy.
I had a honor 8 before, I'd say I bought 6-8 screens for it and never found a good one
Specialosio said:
Hello, there.
Unfortunately, I've dropped my mi mix 3 and I was looking to a new screen.
Looking around I've found many offers with a wide range of prices.
The question is that the Mi Mix 3 feature a Samsung Amoled 6.39 inch but it is impossible to find, everywhere I'm finding an LCD replacement. Can someone help me out?
Plus, I was a bit worried about the screen replacement procedure but then I saw this video which takes a totally different approach and made the whole thing much easier...
Still, I can't find the Amoled version anywhere but only the LCD version...
Cheers
Click to expand...
Click to collapse
Where do you find LCD? I can't even Find it. (I hate amoled with their burn in issues. I love lcd)
Any existing Mix 3 users that had to replace the screen in the past?
Which one did you buy and that you are satisfied with it?
Honestly I don't know which one to look at (primarily I am looking on ebay). There are some that the title say it's amoled, but I am not sure.
Any advice?
I bought the original amoled screen in aliexpress for 80€.
Happy with it!