my phone is micomax A27 bolt..... i have rooted my phone.... and i think also installed CWM recovery... but i wasnt able to go to recovery mode without the help of ROM manager..... so to solve this i went to recovery mode through rom manager and backed up CWM recovery..... after that the phone rebooted and keep on rebooting only showing bolt logo..... then i tried to fix this problem and search internet i tried each and every possible method except this coz i dont have card reader to put clockwork mod folder in my sd card..... i also found a trick in one place....following that i erased my system, userdata etc... and re installed them with the files given by them.... after that when i press volume+ and power button, it wont show the phone test which it used to show..... m in big problem... the only thing i can do with my phone is to enter the fastboot mode... by volume- and power button..... any other combination my phone restarts continuously..... when i asked my friend he said that when i went to recovery mode and backed up CWM, i must have unmounted something important...... i think i may have done that..... what should i do to solve.....
this please help
Related
hi guys happy new year , I seem to have messed up my htc hero last night I went back to the official 1.5 rom by flashing a backup and it as fine but then I tried flashing the official 2.1 but it didnt go past the boot screen so I tried going back into clockworkmod but it just came up with a red triangle it goes into android system recovery 2e instead but wont let me flash anything keeps saying its siganture failed ,, please help me out guys asap as im now phone less , thanks
someone please which file do i need to flash in recovery 2e
Try and recover your phone by downloading an official file from the htc website..
or there might be a similar thread here telling you what to do ..
this should reset your phone so that you can then start again ..
Edit ..: this is the guide you should be using.. the top couple of lines pretty much explains that you need to flash the official file ..
http://forum.xda-developers.com/showthread.php?t=645253
Have you tried booting without the sd card. Sometimes the SD card corrupts and that triangle shows
also try holding volume up + the power button at the triangle screen and select reboot now if that option comes..
the thing is it sticks at the 1st boot screen if i power it up holding home + power it goes to android recovery 2e not clockworkmod anymore , if I could get clockwork on there again i could flash the backup file
thanks or you help mate I got it going with fastboot using cmd prompt and restoring backup
Good work !
The phone was working fine until the battery was empty. I tried to charge it and turn it on, but it's stuck at the Samsung logo splash screen. Holding the power button only restarts the device, so to turn it off I'll have to take the battery out. I don't know how to fix this, and if a factory reset is the only option, I need to backup my data first which I currently don't know how to either (without accessing the OS).
I've got to the Android System Recovery 3e menu and tried clearing cache, which did not help. The option to do a factory reset is also there, but I need to backup my data first, and I don't even know if this will fix the problem.
I'm also able to enter download mode.
When connected to my PC it detects an unknown device named 'samsung_android", and it shows up in adb. I've tried doing a backup through adb, but it wanted me to unlock the screen to accept the backup, which I could not, because I'm stuck at the splash screen.
Is there anything I can do to save my data? Anything through adb? Install root (never done this before)?
dinho10r said:
The phone was working fine until the battery was empty. I tried to charge it and turn it on, but it's stuck at the Samsung logo splash screen. Holding the power button only restarts the device, so to turn it off I'll have to take the battery out. I don't know how to fix this, and if a factory reset is the only option, I need to backup my data first which I currently don't know how to either (without accessing the OS).
I've got to the Android System Recovery 3e menu and tried clearing cache, which did not help. The option to do a factory reset is also there, but I need to backup my data first, and I don't even know if this will fix the problem.
I'm also able to enter download mode.
When connected to my PC it detects an unknown device named 'samsung_android", and it shows up in adb. I've tried doing a backup through adb, but it wanted me to unlock the screen to accept the backup, which I could not, because I'm stuck at the splash screen.
Is there anything I can do to save my data? Anything through adb? Install root (never done this before)?
Click to expand...
Click to collapse
Hey mate, can you get into the recovery mode? Try flashing the TWRP recovery and boot by pressing power button + home button + volume up and find an option to mount your USB storage via USB cable and see if your phone's folder tree is available from the Windows Explorer and hopefully you can backup your data by then. Just make sure you have all the drivers ready.
Hope that helps.
cglegion said:
Hey mate, can you get into the recovery mode? Try flashing the TWRP recovery and boot by pressing power button + home button + volume up and find an option to mount your USB storage via USB cable and see if your phone's folder tree is available from the Windows Explorer and hopefully you can backup your data by then. Just make sure you have all the drivers ready.
Hope that helps.
Click to expand...
Click to collapse
Yeah, I can get into recovery mode. But how do I get the TWRP to my phone? Do I have to put it on my external memory card and then load it from there?
And I could only find it for a S2 Exhilarate SGH-i577 device. Does it matter if my phone is a S2 GT-I9100?
I've never rooted my phone earlier. Is a root necessary to flash a ROM?
dinho10r said:
Yeah, I can get into recovery mode. But how do I get the TWRP to my phone? Do I have to put it on my external memory card and then load it from there?
And I could only find it for a S2 Exhilarate SGH-i577 device. Does it matter if my phone is a S2 GT-I9100?
I've never rooted my phone earlier. Is a root necessary to flash a ROM?
Click to expand...
Click to collapse
Correct. Put the TWRP zip on your external and flash it normally via recovery mode such as CWM not the android 3e recovery. Or find an odin flashable zip for yoyr device.
I am very sure there is one for I9100 because I ran into the exact same problem before and managed to figure it out. You just have to search for it can't give you a link because I'm on mobile now.
You need to root your phone in order to install a new recovery such as TWRP/CWM or even flash new kernel and ROM.
Good luck.
Hello, I was trying to reset my tab completely and I wiped EVERYTHING. I have CWM version 6.0.1.0, My tab gets stuck on Samsung logo screen. It can go into recovery but nothing else. I was told that the reason it won't boot is because I deleted the rom and there is no rom for it to go to. When I try to mount it, it doesn't show up...I've tried to install CWM 6.0.4.6 zip from external SD but installation gets aborted. PLEASE HELP I NEED MY TAB BACK ! Also it shows charging when it's turned completely off...
thatechteen said:
Hello, I was trying to reset my tab completely and I wiped EVERYTHING. I have CWM version 6.0.1.0, My tab gets stuck on Samsung logo screen. It can go into recovery but nothing else. I was told that the reason it won't boot is because I deleted the rom and there is no rom for it to go to. When I try to mount it, it doesn't show up...I've tried to install CWM 6.0.4.6 zip from external SD but installation gets aborted. PLEASE HELP I NEED MY TAB BACK ! Also it shows charging when it's turned completely off...
Click to expand...
Click to collapse
When you say mount it do you mean trying to send the files over through ADB or just mounting the SD card or putting it into download mode?
If its the ADB issue, try to put your tablet into download mode by using the volume key and power button, then download odin and its stock firmware and flash it using odin. Your tablet should restore to factory defaults using that method
If its the SD card then use the method above as it sounds like recovery may have lost it a bit
If you can not put the phone into download mode (which i doubt is the issue you may want to think about a USB jig as they sometimes get past those issues but from your description I doubt its a hard brick as it gets to the logo
2 things you can try!
thatechteen said:
Hello, I was trying to reset my tab completely and I wiped EVERYTHING. I have CWM version 6.0.1.0, My tab gets stuck on Samsung logo screen. It can go into recovery but nothing else. I was told that the reason it won't boot is because I deleted the rom and there is no rom for it to go to. When I try to mount it, it doesn't show up...I've tried to install CWM 6.0.4.6 zip from external SD but installation gets aborted. PLEASE HELP I NEED MY TAB BACK ! Also it shows charging when it's turned completely off...
Click to expand...
Click to collapse
I really new to this, i mean writing to help people, so don't flock me.
First, you say your device still have the recharging lights on when shut down, it tells me it's not only a software error, but some short circuit has happend.
Have you tried a hardreset? search google for your model if you doesn't know how.
From what i can read you still have the CWM Recovery, so download Android-SDK and try flashing the recovery from ADB (Found in platform tools.
Last but most tricky, if nothing helps, you' have to disassemble your device and temporary disable the battery, them press and hold the start button down for 5 sec to remove the poweroverload, reassemble again and try ASB adain, you can't reinstall the recovery directly from the SD
Regards Sc0rpio
Had a problem with my htc one m8, so i pulled out my i9100 backup phone.
it had neat rom 4.1.2 on it, and everything was working fine.
i have tried to flash onmi rom():
1. entered recovery mode
2. backed up CWM to external SDCARD.
3.flased "CWM-KitKatCompatible-i9100.zip" & rebooted into new recovery.
4.installed "omni-4.4.2-20140214-i9100-INFECTED.zip".
5.installed "pa_gapps-modular-micro-4.4.2-20140207-signed.zip"
6.installed "UPDATE-SuperSU-v2.46.zip".
after that, when i wanted to reboot, i got a message saying i could loose su and if i want to fix it, i choosed "NO".
device entered to a boot loop.
i tought no biggy, i would go back to recovery, flash philz CWM and recover my nandroid backup.
it will not get into recovery mode.
tried again, pulled the battery, put it back, hold down VOL-Down+home+power button, and nothing, boot loops over and over again.
tried to get into download mode, not going there as well.
connecting to a pc with ADB+samsung drivers, the device wont show up.
Any suggestions? did i bricked the phone forever?
K-a-M-u-Z-u said:
Had a problem with my htc one m8, so i pulled out my i9100 backup phone.
it had neat rom 4.1.2 on it, and everything was working fine.
i have tried to flash onmi rom():
1. entered recovery mode
2. backed up CWM to external SDCARD.
3.flased "CWM-KitKatCompatible-i9100.zip" & rebooted into new recovery.
4.installed "omni-4.4.2-20140214-i9100-INFECTED.zip".
5.installed "pa_gapps-modular-micro-4.4.2-20140207-signed.zip"
6.installed "UPDATE-SuperSU-v2.46.zip".
after that, when i wanted to reboot, i got a message saying i could loose su and if i want to fix it, i choosed "NO".
device entered to a boot loop.
i tought no biggy, i would go back to recovery, flash philz CWM and recover my nandroid backup.
it will not get into recovery mode.
tried again, pulled the battery, put it back, hold down VOL-Down+home+power button, and nothing, boot loops over and over again.
tried to get into download mode, not going there as well.
connecting to a pc with ADB+samsung drivers, the device wont show up.
Any suggestions? did i bricked the phone forever?
Click to expand...
Click to collapse
Are you sure that the phone doesn't boot into the download mode(Vol Up+Powe+Home) ??
If that's the case, then I'm afraid that your phone is hard bricked forever. You have to fix/replace the motherboard then(about $50). You can go to the service center and get it done, or check out this video(JTAG METHOD): https://www.youtube.com/watch?v=zN7le4GmxZs
I hope something works out for you.
Regards
warrior1208 said:
Are you sure that the phone doesn't boot into the download mode(Vol Up+Powe+Home) ??
If that's the case, then I'm afraid that your phone is hard bricked forever. You have to fix/replace the motherboard then(about $50). You can go to the service center and get it done, or check out this video(JTAG METHOD): https://www.youtube.com/watch?v=zN7le4GmxZs
I hope something works out for you.
Regards
Click to expand...
Click to collapse
yes, i'm sure :'( its not my first time with the device.
i have ordered a usb jig from ebay, maybe it will force the device into download mode...if not... :\
just got my USB jig i have ordered from ebay(less than a dollar), plugged it to the phone, and it got into download mode!
used odin to flash stock rom, and then installed cyanogenmod with the cm installer.
everything is working fine!
I know this is late, but I wanna ask a question. Firstly I'm happy that your bricked phone came back to life(like how many years ago).
Can a USB jig work on any other phone brand other than Samsung phones? Can it be used for tecno, infinix, and all that? Or it is dedicated to only Samsung mobiles?
Hi guys, I really need your help.
I'm new at this rooting stuffs and I tried to root my Oppo Neo 5.
I tried so many softwares like OneClickRoot, FramaRoot, and Kingroot but none seemed to work.
So I resorted to an app called oppo tools
It worked at first but I got really annoyed when my status bar suddenly colored to red when my phone discharges to 15% so I unrooted my phone and rooted back again. I really thought that was going to fix my problem but that's where the bootloop issue started.
I tried to flash some custom recovery zip but it failed since I only have a stock recovery.
But the thing is, I found a guide that says to rename the clockworkrecovery img to PG86IMG.zip.
So I did tried that and as soon as I flashed the zip from my stock recovery, my phone hanged.
I long-pressed the power button to restart and boot into recovery mode but nothing seems to happen.
I'll try to explain a bit more on how it looks when I boot my device.
When it boots normally (I mean not pressing the volume to enter recovery mode) it will only show the logo but when I try to go into recovery mode it will show the logo with a little text on the lower left portion "Recovery Mode"
Before I flashed the PG86IMG.zip, recovery mode was still working and the charging screen when off is working too.
but after I flashed the zip, every time I try to recovery mode the logo shows up with the little text but RECOVERY MODE isn't working. When I charge my phone it automatically boots up and shows the logo and text like it's trying to go recovery mode (I'm just trying to charge? It's going to recovery mode)
I tried using "adb devices" on cmd but it's not detecting any devices.
I'm really out of ideas guys, I know not all people use this model but what would be your suggestion?
A suggestion on how to fix this would really be appreciated :good:
I'm sorry I'm really new at this, please correct me if I did something wrong starting this thread. :angel:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Salman Al-Badgail said:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Click to expand...
Click to collapse
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
DeepBricked said:
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
Click to expand...
Click to collapse
You made a soft brick, not to worry flash it with correct stock firmware, if the phone is in warranty than ask them to do flash, this will take approx 10-30min. If it isn't in warranty than you should try it own or else pay some amount and the rest they will do.
Salman.
how about bootloop, cant enter recovery, reboot continiously when turn on even going to recovery, only fastboot isnt rebooting automaticaly but pc days drivers not succesfuly installed, and when off it qont detect by pc because of rebooting auto,
where can i find a rom for my oppo neo 5
pls help me pls