Related
I have read through various threads and couldnt find it but i know someone who was able to get me the original official Rogers i717r Firmware for people who want to revert Back to Stock, Unrooted, Like brand new.
PHONE: I717RUXLA2
PHONE:I717RUXLA2
CSC: I717RRWCLA2
Build info jan 6 2012
This firmware is to be Used with ODIN only. This is test by me personally running Rogers i717r Samsung NOTE
1, RWC_signed_Q1_USA_1221.pit (3.89 KB) PIT FILE
http://www.multiupload.nl/GUEL1DIAMF
2. ABOOT_SGH-I717R_I717RUXLA2_user_CL875155_REV00.tar.md5 (1.54 MB) BOOTLOADER FILE http://www.multiupload.nl/XSP4X7SU5O
3. PLATFORM_KERNEL_AMSS_SGH i717R_I717RUXLA2_user_CL875155_REV00.tar.zip (536 MB) PDA FILE UNZIP IT FIRST New Link http://www.multiupload.nl/U72CE005WL
4. I717RUXLA2_phone_secure_Q1_ROGERS_REV_00_CL870799.tar.md5 (26.09 MB) PHONE FILE
http://www.multiupload.nl/0KV4DII0X1
5. SGH-I717R-CSC-RWCLA2.tar.md5 (9.19 MB) CSC FILE http://www.multiupload.nl/3EZMLXNY08
All the above files are in order. Just plug them in ODIN and put your phone in download mode by holding Volume down and power button. Get the Green Guy and your are set. press start.
Enjoy.
Say Thanks if you like it. and If anyone need Samsung firmware i can help. PM me.
Thanks! keeping these bookmarked for future reference
Must be a U.S. thing as I haven't been able to connect to multiupload in quite some time now.
Yea maybe its hard to find free provider that will let you upload over 200 mb file
Hi,
I have an ICS ROM, Can I downgrade to GB?
Also, How can I root the device after installing the stock rogers ROM? without flash the counter(if it possible)
Thank you very much.
Delete double post
djkid said:
Yea maybe its hard to find free provider that will let you upload over 200 mb file
Click to expand...
Click to collapse
I understand. I appreciate it. I just used a proxy server to get by multiupload's IP blocking.
dajj said:
Hi,
I have an ICS ROM, Can I downgrade to GB?
Also, How can I root the device after installing the stock rogers ROM? without flash the counter(if it possible)
Thank you very much.
Click to expand...
Click to collapse
i believe you can downgrade using the the rom givin and flash a different kernal that wont increase counter. quick search "flash counter reset roger" in this forum. and root wise there are alot of them. i personally havent found anything that i found stable on my phone. so i am staying away from it. until i do more research. sorry cant be help there.
Hey guys
I rooted my Note and after few reboots my phone stocked on splash screen with logo Rogers. If i understood right I had a problem with new ROM.
Then I flashed my phone via Odin using pda-odin-rogers-stock-system-boot.tar. rebooted and I thought my phone works fine but I have new problem- phone doesnt see sim card. After I flashed modem via CWM using Rogers-Modem-CWM.zip but still have the same problem- NO SIM card...
I did it following this thread : http://forum.xda-developers.com/showthread.php?t=1630843
Finally I tried your files.After file #3 I got message on my phone:
-Veryfing Internal MMC block... checking confirmation-check(0)
Not need checksum confirmation already executed!!!...
Deleting CryprionMeta Data
#MANUAL MODE # and green robot with exclamation mark
an options on the top of the screen
-reboot
-applying update from sd card
-wipedata/factory reset
-wipe cache partitiontest redbend
Button power didnt work, just volume UP or Down.
Do you know what it was?
I just took down battery and then did next steps 4 ,5... pretty sure something was not correct... and to take down battery is could be straight way to brick phone.
However my phone turned on as new but I still have the same problem- phone doesnt see sim card.
Maybe some of you know what to do or any ideas how to solve this problem?
Thank you
How can I get i717r firmware after flashing a custom ROM to get Rogers Live on my device. It says "device not compatible", and I see i717 instead of rogers model i717R
andronikal659 said:
How can I get i717r firmware after flashing a custom ROM to get Rogers Live on my device. It says "device not compatible", and I see i717 instead of rogers model i717R
Click to expand...
Click to collapse
Have you tried editing the build.prop?
Agoattamer said:
Have you tried editing the build.prop?
Click to expand...
Click to collapse
I don't know how to do that yet. :$ do you have a link for tutorial? Thanks.
No I don't have a link. It is just something you learn to do. Most that install custom ROMs do so to get away from these branded apps like Rogers Live. All build.prop files are different. Some give you different IDs and some define how and what your phone will do in certain situations.
What Rogers Live looks for I am uncertain. Possibly others will know better. And if you are not careful what you change in this file your phone may not boot or run without errors. The build.prop can be found on a rooted phone in the system folder. I use root explorer to edit mine but you may find build.prop editors on google play to do this for you. Below is part of the gingerbread build.prop from this thread. You will see all the instances of I717R in red.
ro.build.host=SEP-65
ro.build.tags=release-keys
ro.product.model=SGH-I717R
ro.product.brand=samsung
ro.product.name=SGH-I717R
ro.product.device=SGH-I717R
ro.product.board=MSM8660_SURF
ro.product.cpu.abi=armeabi-v7a
# Samsung Specific Properties
ro.build.PDA=I717RUXLA2
ro.build.hidden_ver=I717RUXLA2
ro.build.changelist=875155
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=CA
ro.wifi.channels=
ro.board.platform=msm8660
# ro.build.product is obsolete; use ro.product.device
ro.build.product=SGH-I717R
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=SGH-I717R-user 2.3.6 GINGERBREAD 248 release-keys
ro.build.fingerprint=samsung/SGH-I717R/SGH-I717R:2.3.6/GINGERBREAD/248:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I717RUXLA2
ro.build.hidden_ver=I717RUXLA2
ro.build.changelist=875155
ro.tether.denied=false
ro.flash.resolution=1080
# end build properties
Try changing your build.prop to show these instances as I717R instead of I717 and change region to CA and see how Rogers Live functions now. It may or may not work for you. Make sure you do some investigating on changing your build.prop first.
Agoattamer said:
No I don't have a link. It is just something you learn to do. Most that install custom ROMs do so to get away from these branded apps like Rogers Live. All build.prop files are different. Some give you different IDs and some define how and what your phone will do in certain situations.
What Rogers Live looks for I am uncertain. Possibly others will know better. And if you are not careful what you change in this file your phone may not boot or run without errors. The build.prop can be found on a rooted phone in the system folder. I use root explorer to edit mine but you may find build.prop editors on google play to do this for you. Below is part of the gingerbread build.prop from this thread. You will see all the instances of I717R in red.
ro.build.host=SEP-65
ro.build.tags=release-keys
ro.product.model=SGH-I717R
ro.product.brand=samsung
ro.product.name=SGH-I717R
ro.product.device=SGH-I717R
ro.product.board=MSM8660_SURF
ro.product.cpu.abi=armeabi-v7a
# Samsung Specific Properties
ro.build.PDA=I717RUXLA2
ro.build.hidden_ver=I717RUXLA2
ro.build.changelist=875155
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=CA
ro.wifi.channels=
ro.board.platform=msm8660
# ro.build.product is obsolete; use ro.product.device
ro.build.product=SGH-I717R
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=SGH-I717R-user 2.3.6 GINGERBREAD 248 release-keys
ro.build.fingerprint=samsung/SGH-I717R/SGH-I717R:2.3.6/GINGERBREAD/248:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I717RUXLA2
ro.build.hidden_ver=I717RUXLA2
ro.build.changelist=875155
ro.tether.denied=false
ro.flash.resolution=1080
# end build properties
Try changing your build.prop to show these instances as I717R instead of I717 and change region to CA and see how Rogers Live functions now. It may or may not work for you. Make sure you do some investigating on changing your build.prop first.
Click to expand...
Click to collapse
Thank you very much. That was a very detailed explanation. I appreciate you giving the time to help me out. I'll try to do some research on google first before modifying anything there, I'm not comfortable yet as I'm afraid my device will not boot. I love this community.
currently running a custom ROM and noticed the signal quality was not as good as the stock rogers. Is it possible to flash the stock radio to get the same signal quality back? and does anyone have a link to said radio .tar?
allan_esp said:
currently running a custom ROM and noticed the signal quality was not as good as the stock rogers. Is it possible to flash the stock radio to get the same signal quality back? and does anyone have a link to said radio .tar?
Click to expand...
Click to collapse
Isn't there one in the first post??
FrolToronto said:
Hey guys
I rooted my Note and after few reboots my phone stocked on splash screen with logo Rogers. If i understood right I had a problem with new ROM.
Then I flashed my phone via Odin using pda-odin-rogers-stock-system-boot.tar. rebooted and I thought my phone works fine but I have new problem- phone doesnt see sim card. After I flashed modem via CWM using Rogers-Modem-CWM.zip but still have the same problem- NO SIM card...
I did it following this thread : http://forum.xda-developers.com/showthread.php?t=1630843
Finally I tried your files.After file #3 I got message on my phone:
-Veryfing Internal MMC block... checking confirmation-check(0)
Not need checksum confirmation already executed!!!...
Deleting CryprionMeta Data
#MANUAL MODE # and green robot with exclamation mark
an options on the top of the screen
-reboot
-applying update from sd card
-wipedata/factory reset
-wipe cache partitiontest redbend
Button power didnt work, just volume UP or Down.
Do you know what it was?
I just took down battery and then did next steps 4 ,5... pretty sure something was not correct... and to take down battery is could be straight way to brick phone.
However my phone turned on as new but I still have the same problem- phone doesnt see sim card.
Maybe some of you know what to do or any ideas how to solve this problem?
Thank you
Click to expand...
Click to collapse
Use the little house button as enter button
---------- Post added at 08:28 PM ---------- Previous post was at 07:38 PM ----------
bit of guessing but it all worked out!!
awsome work!!
I see a few already flashed this.....and I have a little inquiry. Does this (the huge file in the OP specially) also flash the stock rogers kernel (UXLA2)?
I know that there is a CWM version of the stock kernel but just wanna make sure.
thanks......i think if you have an app that reads kernel info (like CPUSpy), the kernel info should have a PREEMPT date or something. According to the system files, the date should be January 6, 20XX (if what i believe is right). thanks again.
This is the same file that Samsung uses for CAnada rogers note
Sent from my SGH-I717R using Tapatalk 2
Works perfectly
Just wanted to say that after downloading all the files and plugging them into odin in order, I just booted my Note into Download mode and pressed Start in odin. After 3 minutes, my phone was back to Rogers stock! Thank you so much!!
Hi all,
I am using AiO 5.2 and I have the following configuration:
SGPT111CH/S
Android version 4.0.3 (release1a)
Kernel 2.6.39.4 [email protected] #1
Build number TISU0R0150110
Recovery .30<3e>
When trying to root using AiO I get both permissions check and the VpnFaker injection successful but the script fails 3 times at the terminal phase.
I've tried wiping, factory reset but nothing works.
I also have a problem with the update decryption. When I launch it I get a build error and a Status 7 and it doesn't go any further. If at the recovery menu I try to launch the install.zip file it fails too.
At this point I am completely lost, I must say that I'm also a little confused. Is my hardware/software combination a problem ? Is the script not working for this device ? I'm more than willing to try any manipulations you want
Cheers,
Serge
bhillou said:
Hi all,
I am using AiO 5.2 and I have the following configuration:
SGPT111CH/S
Android version 4.0.3 (release1a)
Kernel 2.6.39.4 [email protected] #1
Build number TISU0R0150110
Recovery .30<3e>
When trying to root using AiO I get both permissions check and the VpnFaker injection successful but the script fails 3 times at the terminal phase.
I've tried wiping, factory reset but nothing works.
I also have a problem with the update decryption. When I launch it I get a build error and a Status 7 and it doesn't go any further. If at the recovery menu I try to launch the install.zip file it fails too.
At this point I am completely lost, I must say that I'm also a little confused. Is my hardware/software combination a problem ? Is the script not working for this device ? I'm more than willing to try any manipulations you want
Cheers,
Serge
Click to expand...
Click to collapse
1) root - you have to keep on trying...
2) update decryption - you have to be rooted already! - back to 1) !
condi said:
1) root - you have to keep on trying...
2) update decryption - you have to be rooted already! - back to 1) !
Click to expand...
Click to collapse
Hi condi,
Thanks for your reply. Despite many attemps I didn't manage to use version 5.2 to root the tablet, but then I tried this method :
http://forum.xda-developers.com/showthread.php?t=1886460
And use the script there and despite a few errors this worked. I then used your script to "root" again since I noticed that the script I used didn't seem to install busybox and I was concerned it wouldn't be compatible with the environment you setup.
For the update decryption, I had previously rooted the tablet with the manual root procedure and despite that it didn't work. I'll try again now that I have root on the tablet after a full wipe.
Best regards,
Serge Huber
bhillou said:
Hi condi,
Thanks for your reply. Despite many attemps I didn't manage to use version 5.2 to root the tablet, but then I tried this method :
http://forum.xda-developers.com/showthread.php?t=1886460
And use the script there and despite a few errors this worked. I then used your script to "root" again since I noticed that the script I used didn't seem to install busybox and I was concerned it wouldn't be compatible with the environment you setup.
For the update decryption, I had previously rooted the tablet with the manual root procedure and despite that it didn't work. I'll try again now that I have root on the tablet after a full wipe.
Best regards,
Serge Huber
Click to expand...
Click to collapse
Ok after looking at the script I noticed you were waiting for the recovery device. That's when I noticed that my recovery driver was not properly installed. Installing it solve the problem and I got shell access to the recovery !
Maybe this was also causing the issue with the rooting ? Is that possible ?
Best regards,
Serge Huber
Ok I managed to create a custom update but when I try to flash it with AiO everything seems to work fine until the reboot where it just gets stuck on the Sony logo. If I stop the tablet by pressing over 10 seconds on the power button and start it again I get back into my normal system. I also tried your custom prerooted ROM but the same thing happened. Any clues as to what is wrong ?
Cheers and again thanks for all the help,
Serge
Rooting this phone is as simple as using a one click solution.
Download Cydia Impactor for Mac OS X, Windows, Linux (32-bit), or Linux (64-bit)!
The program only installs su in system xbin, then manually we need to install superuser apk and busybox
Official site
http://www.cydiaimpactor.com/
Test rom
Soon
_________OLD MESSAGE_________
Hi,
Does anybody already successfully rooted ZTE KIS PRO?
I've tried z4root, bin4ry, shortfuse, adb pull, chainDD method, framaroot, motochopper, universalandroot, oneclickroot, abuse...
Nothing work's for me... :crying:
ZTE KIS PRO AKA OPTIMOS Zali/Orange Zali
Android 4.1.1 Jelly Bean Kernel 3.4.0
Internal memory :4 GB Free:2 GB
RAM memory :512 MB :silly:
Processor 1,00 GHz Qualcomm MSM7225A
TFT 256k colors 320 x 480 px (3.50")
Camera 3.0 MP
Can't stay stuck in bootloader to use fastboot only FTM mode...
ADB and ADB SHELL working but can't use ADB root...
This is the PT oficial rom, is there a way to rooted before instal it?
http://www.ztedevices.com/support/s...aed-4eba-b717-82c7048ea7a0.html?type=software
can we edit the rom, adding su binaries and busybox to system/xbin, and superuser apk to system/app...
then edit updater script adding:
run_program("/system/xbin/busybox", "--install", "-s", "/system/xbin");
set_perm(0, 0, 06755, "/system/xbin/su");
set_perm(0, 0, 0644, "/system/app/superuser.apk");
set_perm(0, 0, 04755, "/system/xbin/busybox");
symlink("/system/xbin/su", "/system/bin/su");
then flash via stock recovery?
The above is not working, sais instalation aborted, by adb the system is read only and it works with ext4...
Any ideas? or news about rooting methods i can try?
Recovery mode
Volume up + Power
FTM
Volume down + Power
DFU (diagnostics interface)
Volume up + Volume down + Power
no luck too
I have tried all of these things and non of them works. The only success was to unlock it from mobile operator (in service center with help of SigmaKey (only with Sigma dongle)). Any suggestions for how it could be rooted?
Jan Shvets said:
I have tried all of these things and non of them works. The only success was to unlock it from mobile operator (in service center with help of SigmaKey (only with Sigma dongle)). Any suggestions for how it could be rooted?
Click to expand...
Click to collapse
I've tried many things, my idea is that we have to force the software to upgrade, but i've downloaded the soft from zte, pre-rooted the rom but the stock recovery doesent install it, maybe if we have cwm... Dont know if the bootloader is locked... And for one click solutions we need unsecure adbd...
Tested the phone to vulnerabilities, no luck...
http://rootandroid.com can't root this, even paying no root for us...
TioCareca said:
I've tried many things, my idea is that we have to force the software to upgrade, but i've downloaded the soft from zte, pre-rooted the rom but the stock recovery doesent install it, maybe if we have cwm... Dont know if the bootloader is locked... And for one click solutions we need unsecure adbd...
Tested the phone to vulnerabilities, no luck...
Click to expand...
Click to collapse
Yes, the bootloader is locked. I've tried to install CWM but with no success. I think that Sigma is the only solution in this case, but I'll keep trying. Just for now none of known issues worked for me.
Jan Shvets said:
Yes, the bootloader is locked. I've tried to install CWM but with no success. I think that Sigma is the only solution in this case, but I'll keep trying. Just for now none of known issues worked for me.
Click to expand...
Click to collapse
Did you build CWM? Or use from another device?
Have you ever worked with a gold card? Don't know if it will work in this case, but it's a try... I don't really know how to build one but will search...
Its the first phone i know from zte that has locked bootloader, is there another? I'll try to contact zte to know more about it...
How do you use sigma to root?
http://forum.xda-developers.com/show....php?t=1248095 - goldcard creator...
I’ve tried manual temp root, i get a message saying "adbd cannot run as root in production builds"
Jan Shvets can you unlock bootloader with sigma?
Slovakia has more files in support section:
http://www.ztedevices.com/support/smart_phone/cf298a37-3a36-4cbb-a021-34dad442a0e3.html
Support for Spain:
http://www.ztedevices.com/support/smart_phone/30d59198-a7fe-491c-86b1-bed35e3a03d3.html
Brasil and Venesuela not supported by ZTE...
I will keep an eye in here too:
http://www.htcmania.com/showthread.php?t=629008
Finnaly root...
Rooted, see first post...
TioCareca said:
Rooted, see first post...
Click to expand...
Click to collapse
I can't obtain root using this metod - cydia impactor.
Using Framaroot 1.6.1 my Orange Zali is rooted now.
xredxda said:
I can't obtain root using this metod - cydia impactor.
Using Framaroot 1.6.1 my Orange Zali is rooted now.
Click to expand...
Click to collapse
Strange, i've tried framaroot and in mine have not worked, what his your OS version?
Mine is 4.1.1 with the 3.4.0 kernel...
Maybe they patched the bug that made cydia work...
One more thing, maybe cydia have rooted your device did you instaled su from the playstore after?, framaroot install su.apk and cydia needed that instaled manualy, if you try framaroot after cydia of course it will work, the device was already rooted but you not notice that because of the missing su.apk... Just my 2 cents...
This phone as equal specs of the blade3, the only thing difrent i notice is the sceen, maybe cwm from blade3 work in our phone?
This could break the phone and then we have to reinstall recovery via terminal emulator with the command dd from within the phone (not tested because i am again without a proper pc)...
TioCareca said:
Strange, i've tried framaroot and in mine have not worked, what his your OS version?
Mine is 4.1.1 with the 3.4.0 kernel...
Maybe they patched the bug that made cydia work...
One more thing, maybe cydia have rooted your device did you instaled su from the playstore after?, framaroot install su.apk and cydia needed that instaled manualy, if you try framaroot after cydia of course it will work, the device was already rooted but you not notice that because of the missing su.apk... Just my 2 cents...
Click to expand...
Click to collapse
Yes! After installing manually 'su' it did not work. I tried this with both Cydia - 9.12 and 9.13.
... the same OS 4.1.1 with the 4.3.0 kernel.
xredxda said:
Yes! After installing manually 'su' it did not work. I tried this with both Cydia - 9.12 and 9.13.
... the same OS 4.1.1 with the 4.3.0 kernel.
Click to expand...
Click to collapse
That's strange, but you are not the first sayng that, so something as changed, but dont know what...
Have this phone to ...ZTE Kis Pro (Orange Zali). Succes root the phone with cydia , but i try to wirte anounther firmware and it give me a error
: "assert failed: getoroop("ro.product.name") == "P752D20_ORANGE". If any ideea how to write anounther version, i download the android version from zte site.
ysmayl said:
Have this phone to ...ZTE Kis Pro (Orange Zali). Succes root the phone with cydia , but i try to wirte anounther firmware and it give me a error
: "assert failed: getoroop("ro.product.name") == "P752D20_ORANGE". If any ideea how to write anounther version, i download the android version from zte site.
Click to expand...
Click to collapse
Got the same here, cant flash firmware from zte...
Say one thing? is the firmware from zte difrent from yours? another version?
If it is the same the error can be from stock recovery (no custom recovery yet :crying
ysmayl said:
Have this phone to ...ZTE Kis Pro (Orange Zali). Succes root the phone with cydia , but i try to wirte anounther firmware and it give me a error
: "assert failed: getoroop("ro.product.name") == "P752D20_ORANGE". If any ideea how to write anounther version, i download the android version from zte site.
Click to expand...
Click to collapse
You tried this? ( http://www.ztedevices.com/support/s...673-4449-b76b-ce781bb53ded.html?type=software )
To me it worked.
Hi everyone,
I'm living in China and last year, I bought a chinese Sony tablet S. Never, I might use google tools. For long weeks, I try to find help on several forums.
I have installed ADB and followed step by step the "prerooted ICS tutorial" and the "china device tutorial" from AIO v 6.5.
Always, I get a satus 7 error, when I'd like to install a custom ROM, in recovery.
I've copied below this error message:
assert failed: file_getprop ("system/build.prop", "ro.build.fingerprint") == "Sony/nbx03_011/nbx03:3.2.1/THMASU0035/0035.001:user/release-keys"
file_getprop ("/system/build.prop", "ro.build.fingerprint") == "Sony/nbx03_001/nbx03:3.2.1/THMAS0042/0042.001:user/release-keys"
E:Error in /tmp/desklunvr/desklunvr.zip (status 7)
ADB seems to have no problem, it works.
In fact, one time, I succeeded to install the GooglePlay by following the "china device tutorial"; it worked until I have updated system, as it was proposed.
So, I have reset to factory settings. But since, I can't install the rom any more.
Thanks a lot for your help!
Matthieu
About my tablet:
SGPT 111 CN/S
Android version: 4.0.3 R5a
Kernel version: 2.6.39.4 [email protected]#1
Build number: TISU0243410
AIO would not work with a non rooted and r5a device. Root your device, apply backdoor patch and flash a original US ota.
Sent from my Sony Tablet S using Tapatalk
Thanks for you reply.
In fact, I'm a really beginner. What do you mean with "apply backdoor patch". Already, I rooted my tablet by the way of AIO tools. I thought that it worked with R5A device.
Please, do you know a good tutorial that could help me? I have spent many hours, tried several ways.
Matthieu
The aio tool in there you will see a menu section three subsection 4 I think rescue backdoor
Its in the tool it lowers the build number to trick the device in to thinking there is a update available
hit thanks if I helped
sent from rooted xts thanks djrbliss and condi
When you say custom rom what are you using there is no way to put anything other than offical albeit rooted sony firware sony encrypt their tablets unless you have the offical sony codes or a tablet with an unlocked bootloader which I highly doubt
hit thanks if I helped
sent from rooted xts thanks djrbliss and condi
When I said “custom rom”, in fact it was ICS firmwares (I tried to install US R5A and R1A). Here, you can have a look on steps succeded (it seems…).
I’m following the CHINA DEVICE TUTORIAL! v0.4:
1) Root device using option no.1,
2) Run tweaks&mods - and apply Rescue-Backdoor function,
3) Run region changer and choose US region,
4) Download US ICS R1A FIRMWARE (R5A for me - signed-nbx03_001-ota-121116036)
5) Copy it to external SD.
Every time, the 6th step doesn’t work and I get a “status 7 error”
6) Run v5.3 AiO – go to 'Custom Rom' submenu, choose 'Decrypt Update' function, (1- create “decrypted update.zip”)
In order to give you more information, I let you have a look on my PC/tablet settings. Please see below and my attachments.
ADB is working.
Build.prop
(I’m French, so I tried to manually change the two following lines)
ro.product.locale.language=fr
ro.product.locale.region=FR
I’ve also changed ro.build.version.incremental=121116035
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=TISU0143
ro.build.display.id=TISU0143
ro.build.version.incremental=121116035
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=Fri Nov 16 07:18:05 JST 2012
ro.build.date.utc=1353017885
ro.build.type=user
ro.build.user=integ-build
ro.build.host=build10
ro.build.tags=release-keys
ro.product.model=Sony Tablet S
ro.product.brand=Sony
ro.product.name=SYS_008
ro.product.device=nbx03
ro.product.board=nbx03
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=fr
ro.product.locale.region=FR
ro.wifi.channels=
ro.board.platform=tegra
# ro.build.product is obsolete; use ro.product.device
ro.build.product=nbx03
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=SYS_008-user 4.0.3 TISU0143 121116035 release-keys
ro.build.fingerprint=Sony/SYS_008/nbx03:4.0.3/TISU0143/121116035:user/release-keys
ro.build.characteristics=tablet
# end build properties
ro.opengles.version = 131072
wifi.interface=wlan0
ro.ethernet.interface=eth0
ro.ethernet.autoEnable=yes
rild.libargs=-d /dev/ttyACM1 -i rmnet0
windowsmgr.max_events_per_sec=120
ro.tether.denied=true
ro.sony.sound.enabled=true
ro.sony.display.release=release5a
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=vendor/framework/SemcGenericUxpRes.apk
ro.sony.autovolume.threshold=10
ro.sony.update.server=info.update.sony.net
ro.sony.update.category_id=ST001
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
ro.sony.wifisleep=0
ro.semc.xloud.supported=true
ro.somc.clearphase.supported=true
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0_r3
ro.com.google.clientidbase=android-sony
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.sony.wan.ipv6.enable=false
ro.sony.dlna_dms.enabled=false
ro.somc.social_product_model=PRODUCT_MODEL_TABLET
ro.sony.irremote.protocol_type=1
ro.sony.ols.eula=0
Thanks a lot for helping me.
bye
Matthieu
Ok I would skip 6 and flash the rom/ota from the sd card boot the tablet in to recovery the select apply update from sd card
have you tried the flasher that might do the trick
hit thanks if I helped
sent from rooted xts thanks djrbliss and condi
Hi,
Which flasher do you mean?
As you proposed, I've just tried to skip step 1 in "CUSTOM ROM AND FLASHING SUBMENU", then I've tried directly step 5 in this menu "Flash signed zip [straight from recovery]" from recovery mode. (Before I've downloaded "hack_recovery" and "firmwares for ICS R1A/R5A" on SD external card).
In recovery mode, each time, I get Status 7 error message when I use "hack_recovery", and when I try to update ICS R1a or ICS R5A, I get this error message
"E;Prohibit update as a result of checking version or base sku
Installation aborted"
What do you think about that?
Bye.
Matthieu
desarcanes said:
Hi,
Which flasher do you mean?
As you proposed, I've just tried to skip step 1 in "CUSTOM ROM AND FLASHING SUBMENU", then I've tried directly step 5 in this menu "Flash signed zip [straight from recovery]" from recovery mode. (Before I've downloaded "hack_recovery" and "firmwares for ICS R1A/R5A" on SD external card).
In recovery mode, each time, I get Status 7 error message when I use "hack_recovery", and when I try to update ICS R1a or ICS R5A, I get this error message
"E;Prohibit update as a result of checking version or base sku
Installation aborted"
What do you think about that?
Bye.
Matthieu
Click to expand...
Click to collapse
No you didnt under stand im not talking about the custom rom section tweaks and mods section rescue backdoor it will lower your SKU which is why its not allowing you to install a new firmware the one your trying to flash is the same as whats installed therefore it gives an error
Run the rescue backdoor
Put rom/ota on sd card
Boot in to recovery
Apply update from sd card
And it should work
root again And apply rescue backdoor patch again if your device boots after all this you will get a notification of and update
This is a false positive sort of it means the patch has worked and the base sku has been lowered
You can switch the update notification off with the aio tool under the rescue backdoor option
hit thanks if I helped
sent from rooted xts thanks djrbliss and condi
dex9mm said:
No you didnt under stand im not talking about the custom rom section tweaks and mods section rescue backdoor it will lower your SKU which is why its not allowing you to install a new firmware the one your trying to flash is the same as whats installed therefore it gives an error
Run the rescue backdoor
Put rom/ota on sd card
Boot in to recovery
Apply update from sd card
And it should work
root again And apply rescue backdoor patch again if your device boots after all this you will get a notification of and update
This is a false positive sort of it means the patch has worked and the base sku has been lowered
You can switch the update notification off with the aio tool under the rescue backdoor option
hit thanks if I helped
sent from rooted xts thanks djrbliss and condi
Click to expand...
Click to collapse
Champagne!!
It's working... I have got now a french sony tablet S.
By the way of recovery, I installed french firmware for ICS R5A.
Unfortunately, there is a new problem. It's always updating, automatically... I mean, everytime, at starting. First, it's for a french update, but when I shut down and I restart, it's a chinese update, and all disappear (google tools). I can't access Google Play anymore.
Do you think it's possible to fix it?
I have tried to disable OTA system updates, as you proposed.
Matthieu
Ok so you need to look at the posts threads on dual system you now really only have half of a rom there seems to be two system partions so on one side you have china the other fr I think flashing the rom again will work but in not certain
Gald to hear your making progress
hit thanks if I helped
sent from rooted xts thanks djrbliss and condi
Hi,
In fact, I've forgiven during severals months... But I've tried again last days.
Finally, after several nights I've got my final solution. I've installed Jelly Bean by following this tutorial:
http://forum.xda-developers.com/showthread.php?t=2050126
Now, it works very well! I'm using an Astrill VPN; I may normally access to the Google play store, even with the strong censorship in China. My apps are in french and I can discover how to really use a tablet...
Thanks a lot for your help. :good:
Matthieu
dex9mm said:
Ok so you need to look at the posts threads on dual system you now really only have half of a rom there seems to be two system partions so on one side you have china the other fr I think flashing the rom again will work but in not certain
Gald to hear your making progress
hit thanks if I helped
sent from rooted xts thanks djrbliss and condi
Click to expand...
Click to collapse
Recently I got my hands on this Android device but for some reason I can't root it using any of the currently available methods. I've enabled USB debugging, enabled installation of APKs from unknown sources, and tried many tools such as Framaroot, Shuame, RootGenius, vRoot, MTK Tools, even the latest update of Towelroot. I've even tried manually rooting using the psneuter method, but none of them worked, either the tool would say that the exploit was not effective on my device, or the procedure would progress as usual but after the final reboot, my device still doesn't have root permissions (checked via Root Checker app). Does anyone know why this happens or any method to gain root privileges on my device? Here are some of its specs:
CPU: MTK6592 Octa core @ 1.7 GHz
Android: 4.4.2 KitKat
Baseband: MOLY.WR8.W1315.MD.WG.MP.V34 (2014/05/06)
Kernel: 3.4.67 [email protected] #3 (2014/05/28)
Build Number: KOT49H.G9006VSKSU1ANCE
Custom Built Version: 1401178095
(Please see attachment for more details via MTK Droid Tool)
The device is a Chinese clone device so some model numbers may be spoofed but I can confirm at least that it is running the real 4.4.2 KitKat. I'm not too experienced with Android though, so sorry if I've missed anything important.
Try
Please try the VRoot
NekoMichi said:
Recently I got my hands on this Android device but for some reason I can't root it using any of the currently available methods. I've enabled USB debugging, enabled installation of APKs from unknown sources, and tried many tools such as Framaroot, Shuame, RootGenius, vRoot, MTK Tools, even the latest update of Towelroot. I've even tried manually rooting using the psneuter method, but none of them worked, either the tool would say that the exploit was not effective on my device, or the procedure would progress as usual but after the final reboot, my device still doesn't have root permissions (checked via Root Checker app). Does anyone know why this happens or any method to gain root privileges on my device? Here are some of its specs:
CPU: MTK6592 Octa core @ 1.7 GHz
Android: 4.4.2 KitKat
Baseband: MOLY.WR8.W1315.MD.WG.MP.V34 (2014/05/06)
Kernel: 3.4.67 [email protected] #3 (2014/05/28)
Build Number: KOT49H.G9006VSKSU1ANCE
Custom Built Version: 1401178095
(Please see attachment for more details via MTK Droid Tool)
The device is a Chinese clone device so some model numbers may be spoofed but I can confirm at least that it is running the real 4.4.2 KitKat. I'm not too experienced with Android though, so sorry if I've missed anything important.
Click to expand...
Click to collapse
jacksparao said:
Please try the VRoot
Click to expand...
Click to collapse
Thanks, but vRoot does not work on my device. Further checks show that my device model is MAC A215_MULA_4G.
Here is a list of all of the rooting tools I have already tested and confirmed not working:
Framaroot
Shuame
vRoot
RootGenius
MTK Droid Tools
Towelroot
Kingo Root
SRS Root
Root Unlocker
One-Click Root
unrootable SM-9006V
NekoMichi said:
Thanks, but vRoot does not work on my device. Further checks show that my device model is MAC A215_MULA_4G.
Here is a list of all of the rooting tools I have already tested and confirmed not working:
Framaroot
Shuame
vRoot
RootGenius
MTK Droid Tools
Towelroot
Kingo Root
SRS Root
Root Unlocker
One-Click Root
Click to expand...
Click to collapse
I have the same problem. All method don't work whit this phone
Same problem.
NekoMichi said:
Thanks, but vRoot does not work on my device. Further checks show that my device model is MAC A215_MULA_4G.
Here is a list of all of the rooting tools I have already tested and confirmed not working:
Framaroot
Shuame
vRoot
RootGenius
MTK Droid Tools
Towelroot
Kingo Root
SRS Root
Root Unlocker
One-Click Root
Click to expand...
Click to collapse
I have the same phone and the same problem, and no custom roms that have root, I just have found that when it comes from china.
Can someone who knows android help. We are many with this clone S5 1:1 galaxy.
Mail me
please mail me to [email protected] they can help you to build a custom rom..
mickpablo said:
I have the same phone and the same problem, and no custom roms that have root, I just have found that when it comes from china.
Can someone who knows android help. We are many with this clone S5 1:1 galaxy.
Click to expand...
Click to collapse
giuspo71 said:
I have the same problem. All method don't work whit this phone
Click to expand...
Click to collapse
mickpablo said:
I have the same phone and the same problem, and no custom roms that have root, I just have found that when it comes from china.
Can someone who knows android help. We are many with this clone S5 1:1 galaxy.
Click to expand...
Click to collapse
I consulted XDA user S7yler and he sent me this tutorial:
http://forum.xda-developers.com/showpost.php?p=38337401
I followed it and managed to gain root privileges on the device. (The tutorial forgot to mention that you need MTK drivers installed beforehand)
The specific device model is MAC A215, and the tutorial guides you through reading back the ROM image, patching the boot and recovery images, flashing them back onto your device, and then installing superuser binaries.
He also has a detailed post about the HDC MTK6592 family of Galaxy S5 clone devices here:
http://forum.xda-developers.com/showthread.php?t=2761971
Although a pre-rooted ROM is provided there, I strongly suggest making your own patched ROM using images extracted from your device as I have noticed that even though our device hardwares are the same, they may be running different ROMs so any provided pre-patched images may not be fully compatible.
Be sure to thank him if this works for you.
NekoMichi said:
I consulted XDA user S7yler and he sent me this tutorial:
http://forum.xda-developers.com/showpost.php?p=38337401
I followed it and managed to gain root privileges on the device. (The tutorial forgot to mention that you need MTK drivers installed beforehand)
The specific device model is MAC A215, and the tutorial guides you through reading back the ROM image, patching the boot and recovery images, flashing them back onto your device, and then installing superuser binaries.
He also has a detailed post about the HDC MTK6592 family of Galaxy S5 clone devices here:
http://forum.xda-developers.com/showthread.php?t=2761971
Although a pre-rooted ROM is provided there, I strongly suggest making your own patched ROM using images extracted from your device as I have noticed that even though our device hardwares are the same, they may be running different ROMs so any provided pre-patched images may not be fully compatible.
Be sure to thank him if this works for you.
Click to expand...
Click to collapse
Thanks, I will try the rom posted on Needrom since I have enough knowledge to root in my own rom.
Thanks a lot for your interest.
You should try chinese version of Vroot
With 2 devices I have done it with VRoot and PdaNet installed on one device SM-G900F MTK6592 ... on the other one I can not do it
sm-g9006
please can anyone help me PLEASE.
i bought the SM-g9006v from a seller call Jim in alliexpress and the phone is broken . When i put any SIM Card he reply me error ( phone.android.com ), i can't do any phone calls and the error mesage is allways poping. I already tryied to erase all cache data by doing a hard reset . I think that the only solution for these problem is flashing the phone , for that i need to root the phone but my computer is having problems reading the phone without the batery. Can anyone help me telling me what to do. I need a rom and some tuturial to do that.
RIGHT NOW I DONT HAVE A PHONE AND NO MONEY.
i BEG YOU PLEASE TRY TO HELP ME.
My email is [email protected]
Thank you very much.
Download drivers for mtk preloader (you can find it on the forum).
Link your phone with usb cable without battery and open the latest FlashTools.
Download this rom:
needrom . com/mobile/rooted-s5-hdc-from-ibaby888-mtk6592/
Open it with FlashTools (and with the phone linked via usb without battery) click on download button and put the battery in your phone.
Wait for driver installation and wait for flashing.
Remove usb cable, the battery and after 5/10 secs reput battery in.
Power On and wait for the first startup (a few of mins).
Flash SuperSu Zip installer from recovery (you can find it on the forum).
Install a root explorer.
Delete nvram folder in /data and wait about 30 seconds. Reboot and rewrite imei with mtkdroid tools (If you don't have one steel it from and old phone and after destroy it because if your carrier find two identical imei on the network put they in blacklist).
Reboot and check the network and the right imei change with *#06#
Same problem with my G9006V phone. None of the tools posted above are working.
I don't need so badly to root my device, since we have no CM 11.0 ROMs for our device (I had CM ROMs on all my old phones and I actually love it).
The only fact that is annoying me is that I cannot edit the build.prop file, in order to get rid of that stupid 320 dpi. I need 240 dpi on my device. VRoot says that my phone is rooted but I cannot access any files and Root Checker is actually telling me that my phone isn't rooted lol. Root Explorer and File Explorer are telling me that my device isn't rooted so I cannot browse system files.
Anyway, I'll wait for an "one click root" app for this model too ... I'm sure that sooner or later this year we'll have a proper ROM too.
If you find anything new, please let us all know. I already subscribed to this topic.
Best wishes to you all and thank you in advance !
taiji2078 said:
Same problem with my G9006V phone. None of the tools posted above are working.
I don't need so badly to root my device, since we have no CM 11.0 ROMs for our device (I had CM ROMs on all my old phones and I actually love it).
The only fact that is annoying me is that I cannot edit the build.prop file, in order to get rid of that stupid 320 dpi. I need 240 dpi on my device. VRoot says that my phone is rooted but I cannot access any files and Root Checker is actually telling me that my phone isn't rooted lol. Root Explorer and File Explorer are telling me that my device isn't rooted so I cannot browse system files.
Anyway, I'll wait for an "one click root" app for this model too ... I'm sure that sooner or later this year we'll have a proper ROM too.
If you find anything new, please let us all know. I already subscribed to this topic.
Best wishes to you all and thank you in advance !
Click to expand...
Click to collapse
Hello
can be you can help me I have the GMS Version SM-G9006V BUILD: 4.4.2 KOT49H.G9006VSKU1ANCE - MOLY.WR8.W1315.MD.WG.MP.V34 2014
I can not pass version root even with the latest version of vroot and can not find rom root compliant.
my bp is due to NVRAM ERROR FOR WIFI + GPS not detecting that is why I am looking to make root to access the config files.
Thank you for your help.
Im french user but sorry for my langage.
Regards
help root G9006V
Rocfiles said:
Hello
can be you can help me I have the GMS Version SM-G9006V BUILD: 4.4.2 KOT49H.G9006VSKU1ANCE - MOLY.WR8.W1315.MD.WG.MP.V34 2014
I can not pass version root even with the latest version of vroot and can not find rom root compliant.
my bp is due to NVRAM ERROR FOR WIFI + GPS not detecting that is why I am looking to make root to access the config files.
Thank you for your help.
Im french user but sorry for my langage.
Regards
Click to expand...
Click to collapse
Hello not help my bp root?
thank you in advance for my 9006 friends
what is the root rom?
thank you
this video its functionnaly for my clone ? thanks -> https://www.youtube.com/watch?v=KYjulrhJRK0
or this video : https://www.youtube.com/watch?v=s66e-kwvKUU&feature=youtu.be
Regards
I couldn't unroot my motorola mb526 with android 2.3.6 too. I struggled 3 evenings till late in the night to try different unroot software, and guess what! I tried FRAMA root and that was working!!! I downloaded the APK file somewhere with the laptop and then I put it on the sd card and then installed it on my phone. With rootchecker I checked if it was unrooted or not and i simply couldn't believe my eyes, UNROOTED with such a simple app within a few seconds! Upgrade was going smooth and now I have Jelly Bean on my phone ( Wanted actually Kitkat but the installation was aborted the whole time)
Kind regards, Evelyn from the Netherlands
Cherry Mobile Pulse Kitkat Interface MT6592 4.4.2
Hi,
Same here, been trying to root my Cherry Mobile Pulse KitKat MT6592 4.4.2 since i bought it 1 month ago. Tried towelrootv1,root genius, framaroot, Vroot, SRS, Zroot, Kingo, mtkdroid tools but none of them worked. Developers, please help.
I am going to try the rom posted in the post the ibaby one.. i have the g9006v hdc.. any tips?
Im finally going to have rooted rom. Ive tried endlessly to get the imei from my other phone onto this one so itll register on at&t and now itll be possible after i delete the nvram and use mtk droid tools to enter it it been a nightmare but you get what you pay for I guess lol
Ok got the rom installed(s5 rom ibaby888) on my hdc g9006v. It is rooted and I deleted the fefault apns and entered the straight talk one put my sim in and wont register on att network. I even tried to make the imei the one from my existing phone and still no luck. Everything else works flawless Im sure I am just missing something. I deleted the nvram folder with root explorer also and redid imei. What else can I try to get it to register on network? Any way to manually add fields to the apn? Its checkboxes instead of writig apn type.. i juat check dwfault, mms, and suppl.... any ideas?