Q&A for [TUT] Instructions MTK6577 USB VCOM Driver Installation
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TUT] Instructions MTK6577 USB VCOM Driver Installation. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I'm blocked at the first step (lol).
I find the VCOM Driver on USDDeview. When i click on "uninstall selected device", nothing happens. What i have to do?
Help!
Hello! I'm tryin to flash stock ROM via SP Flash tool to my phone Xolo A500L, but this software ain't detecting my phone. For one second it detects, red bar progresses, then disconnect sound comes and this error comes up. Any help guys please!? My phone is just dead, it's opening after the XOLO LOGO.
memory buffer problem
after install sp flash tool, when press start show memory buffer loading image verification fail, how to solve it....?
Pls ...help...!
Related
Q&A for [GUIDE] Set up ADB and Fastboot on a Mac easily (With Screenshots!)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE] Set up ADB and Fastboot on a Mac easily (With Screenshots!). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Everything works until....
the very last stage when I put in adb devices and it says command not found???
Please advise
Simon
Thank you AshtonTS
I had been stuck in boot animation after trying to install a modification and with your help and another on flashing a stock image I'm back up and running! Thanks so much.
Followed the whole step-by-step and I got it to work. After I unlocked the bootloader using the how-to from Sony, the device can't be found anymore.
Any thoughts?
[edit] Got it, USB-check was turned off. My bad
i've followed this yet when i execute ./adb devices no devies show up... anyhelp would be greatly appreciated.
tnx
Flash
How can I flash TWRP, root my device and load OS 11 using this method? Thanks in advance...
How can I get the latest dab and fast boot?
Or else, how can I know if the ones I have are right for my Nexus 5?
I've downloaded the ones posted by r0ger here: http://forum.xda-developers.com/showpost.php?p=61676680&postcount=183
I'm pretty sure everything should work ok, but after burning a N4 last year, when modding from a Mac, I now proceed very carefully.
Thank you.
When I enter the command
./adb devices
My device is shown, but it is shown as offline. Further I cannot execute any other commands.
Q&A for [Root?] Acer Liquid S1 / S510 / A10 with KK ROM
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Root?] Acer Liquid S1 / S510 / A10 with KK ROM. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Good job @nikagl!!
Just let me know if I can help you! Hopefully we'll get root soon
Yeah, will post progress in the main thread, so make sure to subscribe that section for updates
SuperSU binary can't update
Hi nika, 1st I want to say thank you for this guide root acer liquid s510 in kitkat rom. I already root my device acer liquid s510 and I have gain a root access, but there is a problem on SuperSU keep failed to update the binary, is it normal because it still can't update binary or I have make mistake step on the guide?
Acer Liquid S1 Android 4.4.2 Root
Hello,
I can´t root my phone with KitKat. I try it on Ubuntu 14.10, but it always get this error:
"Trying to establish ADB Connection...
sudo: unable to execute bin/posix/64/adb: No such file or directory
E: Couln´t connect your Acer Liquid S1 (S510/A10) over adb. Plug-In the devicce with USB-Debugging Mode turned on.
My phone is on Debuggin Mode. What can I do? What is the problem? Thank you for help.
abc360 said:
Hello,
I can´t root my phone with KitKat. I try it on Ubuntu 14.10, but it always get this error:
"Trying to establish ADB Connection...
sudo: unable to execute bin/posix/64/adb: No such file or directory
E: Couln´t connect your Acer Liquid S1 (S510/A10) over adb. Plug-In the devicce with USB-Debugging Mode turned on.
My phone is on Debuggin Mode. What can I do? What is the problem? Thank you for help.
Click to expand...
Click to collapse
Are you sure you downloaded and extracted the whole zip? Especially check for a file in the folder bin/posix/64 called adb. It should be under the folder in which you executed the toolkit.sh file...
The USB connection from my S1 to my computer is not working. Will I still be able to root my phone?
Coolaswa said:
The USB connection from my S1 to my computer is not working. Will I still be able to root my phone?
Click to expand...
Click to collapse
Yes, but extremely difficult. Follow the steps in the first post....did all off that without USB...
Q&A for Galaxy Player 5.0 Bootloader *ONLY* Hard Brick Recovery
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Galaxy Player 5.0 Bootloader *ONLY* Hard Brick Recovery. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Brick of Galaxy S Wifi 5
Hi, I've bloqued a Galaxy S Wifi 5. I did not notice that a phone was call Galaxy S and I take the wrong files with Odin so root fail but when I turn Off the tablett from Dowloading mode, it never boot anymore, screen stay black. I unplug the battery but no change.
I try UnbrickableResurrector R40 on Ubuntu, but the device detected is S5PC110 and when I choose device type S5PC111 (Galaxy Player), i lauch Perform Resurrection - Download Mode, then it stop to please wait... Uploading.. but nothing more.
I need help, thanks
Hi, anyone to help me?:crying:
Hi everybody , I found the problem, it was gksudo wich was not installed.
So the downloading mode is back
Hi, so i say that I succeed to have the download mode with Unbrickable resurector but the galaxy is not detected by Virtual Box.
Can you help me?
Thx
Hi,
ok I succed to flash via odin, but screen is always black, galaxy is always view as Gti9000 in odin.
I try different flahs via odin, they succed but not result.
Please, anyone to help?
Any chance?
Could I, by any chance, use this to restore to the stock bootloader without a hard brick or Linux? I accidentally restored factory software to Bootloader instead of PDA, but I installed it right now, however it just loops the boot animation.
Q&A for (Rooted)(Guide)(Noobs) LGMS395 AKA LG Optimus F60
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for (Rooted)(Guide)(Noobs) LGMS395 AKA LG Optimus F60. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
command prompt appears then cuts off
When I open file the command prompt window pops up for like a sec then cuts off.
It does that everytime I open it.
Does this work with Linux?
I just want to know if there's any way this could work with Xubuntu 12.04L LTS.
I'm stock on root process!
"You should see something happening and not a return of a blank command. Once it's finished pull the battery and boot up your device is rooted"
I did everything. Step by Step, but as your thread said: "You should see something happening and not a return of a blank command. Once it's finished pull the battery and boot up your device is rooted"
My phone show 0%
User B50
rooted (red color)ur
I wait, and wait, and wait, up to an hour. and my computer do not show nothing, neither my phone, it do not show the percentage completed, and on my computer when I press enter to execute the command, just jump to the next line and do nothing. Please help to continue with the process.
Postdata:
I run the process complete Step by Step again, and Now is works. My phone is UNLOCK! ROOTED! YeaaH!
thanks!
It work for me. thanks
problems getting root to take (lg optimus f60 metro pcs)
ok so I have gone through the steps to root my phone at least 30 times over the last month. everything goes just as it should and according to the instructions right up until the very end. Once I complete step 5 with my phone in download mode, NOTHING HAPPENS. . .I paste the script into my command window and hit enter and the only thing that happens is that on the next line of the command window there is a "_" that just blinks infinitely. I have let it stay for hours before finally removing my battery and nothing I do seems to work, The process seems so simple that I cant imagine what I could be doing wrong. someone please help me through this as I desperately want to get this phone rooted
EDit---
So I just found another thread on this forum with a solution that worked seamless for me. I used a program called DP Root. Just do a search on dp root and it will be easy to find. . . worked awesome!!!
I used king root and it worked well
Q&A for [fastboot] l9 p760 p765 p768 p769
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [fastboot] l9 p760 p765 p768 p769. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Bricked P769BKGO
Hi,
I have the same problem as nitagro with my LG Optimus L9 P769BKGO
Only difference is that i don't have partition errors.
I can flash via fastboot. ( x-loader, u-boot and recovery )
But still the device keeps appearing and disappearing in windows (TI Boards -> OMAP4430 USB Device)
Cannot get into S/W upgrade mode, only black screen and no vibration. ( Using any button combinations yields nothing )
I have tried Lelus fastboot flashing for both JB and ICS still no go.
Tried flashing bin files extracted from stock V20D_00.kdz ( x-loader, u-boot, boot and recovery), nothing still.
Is this the beginning of the end?
Any help will be appreciated.
I'm currently having he same problem as nitagro. Can't enter the download mode to try flashing kdz and when fastbooting I get "FAILED (remote: partition does not exist)". Is there any help here?