My greetings to all the developers here and for all the members , I'm going to explain what happened with me .
I tried to put a Customed Rom on my Nokia Lumia 800
1) I used NSS 0.58 to put the Qualcomm boot on my phone .
2) it worked
3 ) I found a problem with Installing the drivers of Qualcomm on my Windows 7 32 bit
4) I installed the drivers ,
5) I tried to hard rest my phone to flash it and the my phone died , it doesn't display anything no boot , nothing , it just vibrates 2 times, one is long a little bit and another after the long one is short .
Please is there any solution to this problem ,
I tried to press the buttons power on/off and Volume - and the camera , but it didn't work at all
and even pressing the buttons the Camera and Power on/off doesn't work this time .
When I connects it now to the computer , it shows qualcomm cdma technologies msm .
This happened to me once, what i did was to charge it on my computer. try and reset it while it's connected to the computer. if this doesn't do it, try leaving it charging for at least 30 minutes then try the volume - + power + camera button trick. This did it for me.
Related
Hi first sorry for my bad english but i will do my best.
So heres the story, i tried to root my GF phone in order to install CM 10.2, i was able to install safestrap but i deleted something and now the phone dont even power one. I mean when i do any combinaison of Power + Volume up or down or even Power + volume up and down at the same time nothing hapen, No motorola logo, nothing append.
But i saw something, when the phone is plugged in usb and i try to boot it with volume down + power i saw an: OMAP thing in device manager... but ... it appear, disapear like 20 time in row and stop to appear after 2 minute i mean my comp detect, delete, detect, delete if you know whats i mean
The phone is a Rogers XT910 GSM phone it was working number one prior flashing but now it dont power on. Any idea ? i searched a lot on xda, tried almost anything, but nothing work.
I flash phone on a daily basis but never flashed a motorola phone before
So, let's go, let me help you mate...
1 - turn off your phone;
2 - press and hold every single physical button together (power, Vol+, Vol-)
3 - You will see a recovery screen (like an DOS on computer)
4 - Pressing Vol- you change the options, Vol+ you select any option there
5 - Enter the option: AP Fastboot
6 - Download the program called RSDLite
7 - Download a full official retail JB rom
8 - Install this rom using RSDLite
9 - After you pass whole process succesfully, your phone is ready to be used again.
Remember: CHARGE your phone to 100%, because the process is slow and your battery will drain fast, so have sure you did a long charge before installing the rom again.
I was direct on the answer...if you have any doubt...so ask...
ayeros said:
Hi first sorry for my bad english but i will do my best.
So heres the story, i tried to root my GF phone in order to install CM 10.2, i was able to install safestrap but i deleted something and now the phone dont even power one. I mean when i do any combinaison of Power + Volume up or down or even Power + volume up and down at the same time nothing hapen, No motorola logo, nothing append.
But i saw something, when the phone is plugged in usb and i try to boot it with volume down + power i saw an: OMAP thing in device manager... but ... it appear, disapear like 20 time in row and stop to appear after 2 minute i mean my comp detect, delete, detect, delete if you know whats i mean
The phone is a Rogers XT910 GSM phone it was working number one prior flashing but now it dont power on. Any idea ? i searched a lot on xda, tried almost anything, but nothing work.
I flash phone on a daily basis but never flashed a motorola phone before
Click to expand...
Click to collapse
I tryed all of those before but dont have any display at all ;\ i mean really nothing not even text on screen
Anyone ?
So I've had this Nokia Lumia 800 gathering dust in a box because I could never figure out how to restore it.
I'm guessing it's corrupt firmware or something but I know it's a common fault on this phone.
It's just stuck on start screen with the NOKIA logo.
It does sometimes bring up the no battery symbol, just a battery with one red bar in the middle of the screen and then windows trys to install drivers for it, so I guess it's recognized to some extent (fails to install drivers)
Does anybody have any ideas on bringing it back to life?
The phone was never rooted or modded
UrbanDesigns said:
So I've had this Nokia Lumia 800 gathering dust in a box because I could never figure out how to restore it.
I'm guessing it's corrupt firmware or something but I know it's a common fault on this phone.
It's just stuck on start screen with the NOKIA logo.
It does sometimes bring up the no battery symbol, just a battery with one red bar in the middle of the screen and then windows trys to install drivers for it, so I guess it's recognized to some extent (fails to install drivers)
Does anybody have any ideas on bringing it back to life?
The phone was never rooted or modded
Click to expand...
Click to collapse
You can try these (2) methods...
Method 1) Note If your phone is currently stuck on the manufacturer's logo, Disconnect your phone from the USB cable.
Hold the volume - and power buttons to turn it off. After your screen goes black, quickly hold only the camera button AND connect the USB cable to your phone and computer...before the phone vibrates and starts back up to the logo.
-------------------------------------------------------------
Continue holding down the camera button until you see the connect-to-computer screen.
-------------------------------------------------------------
Release the camera button.
Leave the phone restart alone, then wait about 4/5 minutes .
==========================================================
Method 2) What u need:
Google this and download : Nokia Care Suite
Next step:
1. Open Program files (x86) -> Nokia -> Nokia Care Suite -> Application louncher -> bin -> ApplicationLauncher.exe
2. Choose PRODUCT SUPPORT TOOL FOR STORE
3. Take a Nokia Lumia 800. Turn it OFF. HOLD VOLUME+ BUTTON and Connect to pc with usb cable. Release when it vibrates.
4. In PRODUCT SUPPORT TOOL FOR STORE press PROGRAMMING-> RECOVERY.
5. Next step Press: FILE -> Open product.
6. Choose the RM-801 product. Press open. Wait until it loads. Dont take care if shows in corner some errors.
7. Press START.
Wait for the Phone to flash and restart. [After flashing connect your Nokia Lumia 800 to charger and wait first it shows: Battery with red indicator, then NOKIA logo, after 2-5 minutes phone will boot up 100 %].
...Thats it
Went to do a wireless update on phone and it crapped out. It's my first android and i've tried everything:
Android drivers download, All MTK Usb Drivers
Sp-Flash, won't work because the phone keeps rebooting and i can't update driver
Put Leagoo firmware version 5 then 8 on sd card and it wouldn't let it install
Flashboot wont work adb will connect through sideload but no help
PdaNetA4150 won't work
I don't think i put it in debugging mode, i remember looking at it and thinking i should check it out some time!
First off all:
Make sure you can get your device turned off: using the Power + Volume up + Volume Down combination
or hold Power for 10 SECS! (count slowly)
or removing the battery (only when it's not integrated!)
Then hold the volume down or volume up while connecting your phone with a USB cable connected to the computer ( this should get you into a sort of flashing mode...)
Reply when this worked plz.
Greetings
MrMaddTraxx
MrMaddTraxx said:
First off all:
Make sure you can get your device turned off: using the Power + Volume up + Volume Down combination
or hold Power for 10 SECS! (count slowly)
or removing the battery (only when it's not integrated!)
Then hold the volume down or volume up while connecting your phone with a USB cable connected to the computer ( this should get you into a sort of flashing mode...)
Reply when this worked plz.
Greetings
MrMaddTraxx
Click to expand...
Click to collapse
Got the phone sorted.....used SP Flash tool, trick was to insert battery as soon as i heard the computer recognise the usb connection, then SP went to work.
Allright , great job!
hi..me also having this kind of problem..after tried to upgrade from wifi..now my phone is dead..how to connect my phone to pc for flash..please describe in detail step...tq...my phone is Leagoo Elite 2...
hi everyone happy new year
pleaaaaaase i need your help. i flashed my lg ls992 rom, but when the flash ends, normally the device rebooting but my device is going off and still of, i press power button but it's still of, trying to enter to recovery mode it's the same, connect the phone to charge but nothing change it stills off and don't charge, but when i connect it to pc , it's recognized the mobile driver but the charging signal don't appears.
i tried several thing like inplug the batterie and press 30 seconds on power button.. but nothing new, no flash program recognized my device
please help me 3 days of trying and trying but not result
medja77 said:
hi everyone happy new year recognized the mobile driver but the charging signal don't appears.
i tried several thing like inplug the batterie and press 30 seconds on power button.. but nothing new, no flash program recognized my device
please help me 3 days of trying and trying but not result
Click to expand...
Click to collapse
Uninstall all drivers use USB DEVIEW to uninstall hidden drivers and do this
https://www.youtube.com/watch?v=dMzEcyVwQiM
Hello,
I'm going on again on my WP15 which is on bootloop after trying to put an magisk patched rom to obtain root.
The objective now is just to put a official factory rom (which I downloaded from the official website for the right model)
The problem now is not how to do that but how I can connect the phone to the computer because :
Assuming that the phone is connected via usb-c to the computer on usb-a and the phone is on.
1 The screen is black
2 windows connect sound
2.1 Com port connected (device manager)
X wait 1s
3 windows disconnect sound
3.1 com port disconnected (device manager)
2&3 x2
4 Screen on : On screen :5G oukitel logo + android logo + Orange state; devive unlocked[...] not trusted[...]; device will boot on 5s
repeat 1 indefinitely
Please Note :
That I do not have ADB access since I switched from w10 to 11 so the rsa keys are not valid.
The phone is stuck but when I say stuck, it's completely because button vol- + power = nothing, constant bootlooping and vol+ + power = the same schema (1,2,3,4) except that there is no wait time between 2 and 3, it's instant.
The phone is only off when out of battery, As soon as I connect a cable the phone turn on and I can do nothing except disconnect cable and wait (Can be very long with an 15000 mAh battery...)
There is absolutely no custom bootloader so no twrp or any custom recovery/installation bootloader.
With that... I think it's definitely bricked... I'm already thinking of soldering a new rom (or asking someone to do for me)
If you need more details or precisions tell me !
Thank you in advance !
Lunalunea said:
The phone is stuck but when I say stuck, it's completely because button vol- + power = nothing, constant bootlooping and vol+ + power = the same schema (1,2,3,4) except that there is no wait time between 2 and 3, it's instant.
Click to expand...
Click to collapse
seems you missed the most important thing what I've said - ignore any phone activity, just hold.
use this for flashing https://spflashtools.com/windows/sp-flash-tool-v5-2208 I've used 5.2134, lower versions not support mtk6833. and do not use 6.+ versions.
again:
- install mtk usb-com drivers (by manual of flashtool if you did not do it yet)
- check at firts only boot.img and vbmeta.img (do not use "format" only "download")
- power off phone (if you can't, plug your phone in pc and click "download", it'll throw error with suggestion to disconnect battery, but phone would power off. if this didn't help, then just skip this point and try to continue anyway)
- unplug your phone
- click "download" button (yes while your phone unplugged)
- on unplugged phone, hold both volume buttons and hold power button too (three buttons at once).
- hold it all >15 seconds (20 for sure) and ignore any phone activity, just hold.
- release power button only (keep holding both volumes)
- plug your phone (still keep holding both volumes)
- now flashing process must start and you may release any buttons.
vxsw said:
seems you missed the most important thing what I've said - ignore any phone activity, just hold.
use this for flashing https://spflashtools.com/windows/sp-flash-tool-v5-2208 I've used 5.2134, lower versions not support mtk6833. and do not use 6.+ versions.
again:
- install mtk usb-com drivers (by manual of flashtool if you did not do it yet)
- check at firts only boot.img and vbmeta.img (do not use "format" only "download")
- power off phone (if you can't, plug your phone in pc and click "download", it'll throw error with suggestion to disconnect battery, but phone would power off. if this didn't help, then just skip this point and try to continue anyway)
- unplug your phone
- click "download" button (yes while your phone unplugged)
- on unplugged phone, hold both volume buttons and hold power button too (three buttons at once).
- hold it all >15 seconds (20 for sure) and ignore any phone activity, just hold.
- release power button only (keep holding both volumes)
- plug your phone (still keep holding both volumes)
- now flashing process must start and you may release any buttons.
Click to expand...
Click to collapse
Hello,
Sorry, I was not very active since this post and I abandoned for a very long time.
But ! Your instructions was good and I finally got my phone back to life !
Since then I realized that the Oukitel brand is very sketchy about theirs ROMs on the Oukitel website because the WP15 model is associated with the WP13 ROM on the download center so... WHY ? this is so confusing because now I have a WP15 advertised ROM (From a website... Yes... I know I was dumb to do that) and it's working yes... but this is very buggy for example the gyroscope is crazy or my MAC address is never the same even if I turn the built-in MAC address spoofing option off...
I will do some research just to get my phone as normal by doing it as clean as possible because I know now what is implying for doing that.
Thank you so much for your patience and especially for your guide and I apologize for my dumbness.
Lunalunea said:
the WP15 model is associated with the WP13 ROM on the download center
Click to expand...
Click to collapse
have no idea what are you talking about.
just checked in dl center on oukitel official site and seems all is ok. wp15 have it's own fw page and redirect to correct dl fw page, wp13 have it's own.
you can't mix up fw, in case wp13 signed exactly as wp13:
v318a-oq-s88-128g8g-bom2-hdp-r0-cts-eu_OUKITEL_WP13_EEA_V12_20210731_user_20210731.tar .gz
wp15 have no direct sign, but it have a cpu defenition:
TF919_OQ_S89_6833_R0_EEA_V1.9.7.2_S211014 .zip
i.e. mt6833 aka dimensity 700. wp 13 have a dimensity 800 aka mt6873
nb, in dl center, fw tool seems not works properly, so you must use a flashtool as I'd referred before.
I've tried everything, for 5 full days, then had no option left but to give up. Sorry.