Sir,
Sir my moto e is rooted and i have changed lots of OS in my moto e, but currently(10/03/2015) i am having problem in my moto e, i have downloaded the latest OS from here, i have done the process for installing the OS.
1)Recovery mode,
2)in wipe<advance wipe<leaving external sd card i have checked all and wiped it
3)then in install menu i have selected the new os to extract and here the problem arised
my battery was 90% and i flashed it but the flashing is not finished yet, its saying flashing file and from
3 hours its still flashing. Sir tell me what should i do.
Moto E problem
Sir,
I haven't tried anything from my side but, my sd card is in my mobile so is it safe to remove memory card directly, because still battery is 78% and still flashing is going on, sir please help.
Dig_Vilas said:
Sir,
I haven't tried anything from my side but, my sd card is in my mobile so is it safe to remove memory card directly, because still battery is 78% and still flashing is going on, sir please help.
Click to expand...
Click to collapse
State ROM name, recovery ?? Also try rebooting to recovery and reflashing
Moto E problem
dem0nicbl00d said:
State ROM name, recovery ?? Also try rebooting to recovery and reflashing
Click to expand...
Click to collapse
Sir, its cynogen mod 12 by percy_g2, I tried rebooting but its not working and sir you telling me to reflash, but sir reflash is done in fastboot mode but i am stuck in recovery menu. So can you tell me how Can i reflash
Dig_Vilas said:
Sir, its cynogen mod 12 by percy_g2, I tried rebooting but its not working and sir you telling me to reflash, but sir reflash is done in fastboot mode but i am stuck in recovery menu. So can you tell me how Can i reflash
Click to expand...
Click to collapse
Cancel that CM12 installation and flash again...... By reflashing,I meant flashing that zip again after cancelling
Related
i have rooted my lg p765 without using the pc i.e direct from the phone. after that i tried to update the software(may fault). then it rebooted n got stuck in the cwm (clockworkmod recovery v6.0.3.1). everytime i reboot it shows the lg logo n then opens the cwm. i then wiiped all the cache, delvic cache, etc but didnt work. i even installed 3 different custom roms including the official cyanogen mod 10.1. still not working. plz help me. i beg u..... :crying:
kapildey said:
i have rooted my lg p765 without using the pc i.e direct from the phone. after that i tried to update the software(may fault). then it rebooted n got stuck in the cwm (clockworkmod recovery v6.0.3.1). everytime i reboot it shows the lg logo n then opens the cwm. i then wiiped all the cache, delvic cache, etc but didnt work. i even installed 3 different custom roms including the official cyanogen mod 10.1. still not working. plz help me. i beg u..... :crying:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2415868
Follow this . I solved the problem using lg mobile support tool .
There is another method as mentioned by kuma82 in the same thread . Nothing to worry :highfive:
stuck in boot loop. nothing working... (CWM, hard reset)
rashq said:
http://forum.xda-developers.com/showthread.php?t=2415868
Follow this . I solved the problem using lg mobile support tool .
There is another method as mentioned by kuma82 in the same thread . Nothing to worry :highfive:
Click to expand...
Click to collapse
i managed to flash the recovery using adb. but after that i ended up in another boot loop. this time it doesnt even open cwm. only lg logo comes n it gets restarted again n again. hard reset, cwm nothing working except the software update mode. so tried to install kdz but after 15% it says no device found.. i cant understand what to do.. tried everything.. plz help me...(i had JB installed previously i.e the JB provided by LG).. my phone is rooted, bootloader is unlocked... help me....
kapildey said:
i managed to flash the recovery using adb. but after that i ended up in another boot loop. this time it doesnt even open cwm. only lg logo comes n it gets restarted again n again. hard reset, cwm nothing working except the software update mode. so tried to install kdz but after 15% it says no device found.. i cant understand what to do.. tried everything.. plz help me...(i had JB installed previously i.e the JB provided by LG).. my phone is rooted, bootloader is unlocked... help me....
Click to expand...
Click to collapse
You flashed kdz offine ?? Try with lg mobile support tool. Download the software . connect the phone in software upgrade mode. It will detect your device . then you can upgrade to latest version or install recovery ( from pull down menu ).
Its an online method.
Hope this will help
LOve LoVe LoVE you dude...!!!
rashq said:
You flashed kdz offine ?? Try with lg mobile support tool. Download the software . connect the phone in software upgrade mode. It will detect your device . then you can upgrade to latest version or install recovery ( from pull down menu ).
Its an online method.
Hope this will help
Click to expand...
Click to collapse
dude u r just my life savior dude...
i love yooooouuuuuu..... u just saved my ass.. finally i am going to sleep after 2 days.. thanks a lot dude....
love u....:victory::angel:
kapildey said:
dude u r just my life savior dude...
i love yooooouuuuuu..... u just saved my ass.. finally i am going to sleep after 2 days.. thanks a lot dude....
love u....:victory::angel:
Click to expand...
Click to collapse
:good:
the story : I unlock bootloader, root, install custom room etc
everything is okay for a few days,
then suddenly when i shutdown/reboot it have bootloop
(the screen is only show Your device has been unlocked scree and the after a few second it boot again before entering the usual motorolla logo)
I already use this instruction http://forum.xda-developers.com/showthread.php?t=2759495
but my phone still have bootloop
is there anything that i miss or something that i should try
please help
thanks a lot
ps:
it seems i also use indian version (dual sim) like http://forum.xda-developers.com/showthread.php?t=2797947, but
Q07 said:
the story : I unlock bootloader, root, install custom room etc
everything is okay for a few days,
then suddenly when i shutdown/reboot it have bootloop
(the screen is only show Your device has been unlocked scree and the after a few second it boot again before entering the usual motorolla logo)
I already use this instruction http://forum.xda-developers.com/showthread.php?t=2759495
but my phone still have bootloop
is there anything that i miss or something that i should try
please help
thanks a lot
ps:
it seems i also use indian version (dual sim) like http://forum.xda-developers.com/showthread.php?t=2797947, but
Click to expand...
Click to collapse
so ...u have custom recovery.... open it... wipe cache,dalvik cache,data,system .....
then flash any rom(preferably CM11 RC2)...mentioned in this forum of moto e..... ...
dchatterjee172 said:
so ...u have custom recovery.... open it... wipe cache,dalvik cache,data,system .....
then flash any rom(preferably CM11 RC2)...mentioned in this forum of moto e..... ...
Click to expand...
Click to collapse
sorry can You give me link?
i already search this forum but only got unofficial build
Q07 said:
sorry can You give me link?
i already search this forum but only got unofficial build
Click to expand...
Click to collapse
http://builds.hubdroid.com/cm11/nightlies/final/condor/?dir=RELEASE_CANDIDATE
use "rc2"
follow my instructions.....which i had given above
dchatterjee172 said:
use "rc2"
follow my instructions.....which i had given above
Click to expand...
Click to collapse
ok thanks
tried RC2 and still got bootloop
downloading RC1 now
btw step what i do (please correct me if i wrong) :
copy zip into mini sd
boot recovery
factory reset (it said that it wipe cache, data, dalvic, or should i wipe manually?)
install zip
reboot
Hello Guys
I Installed Twrp Recovery in my moto E..But Now I Want To Go Back In My Stock Recovery..Means i Dont Want Any Of Those Cwm or Twrp..i Want to be in Stock Recovery...
Will Flashing Stock Rom/Firmware ..Resolve My Problem???
Or I Need To Flash Something Else??
++++
Will I Be Able To Upgrade To Official Updates From Moto E
1.If My Phone's Bootloader Is Unlocked
2.If I Install Twrp/Cwm Recovery
Or I Need To Be In Stock Recovery + Locked Bootloader To Get Official Updates In Future
Just flash the stock recovery only.No need to flash whole ROM.
You'll be fine.
You will receive updates on unlocked BL but you will need stock recovery and unmodified system to update successfully.
neo.ank said:
Just flash the stock recovery only.No need to flash whole ROM.
You'll be fine.
You will receive updates on unlocked BL but you will need stock recovery and unmodified system to update successfully.
Click to expand...
Click to collapse
Thanks Bro
Will You Please Give Me The Links Of Stock Recovery For Moto E and How to flash that ??
neo.ank said:
Just flash the stock recovery only.No need to flash whole ROM.
You'll be fine.
You will receive updates on unlocked BL but you will need stock recovery and unmodified system to update successfully.
Click to expand...
Click to collapse
...If I Flash Stock Firmware...I wilk get my Stock Recovery back??
neo.ank said:
Just flash the stock recovery only.No need to flash whole ROM.
You'll be fine.
You will receive updates on unlocked BL but you will need stock recovery and unmodified system to update successfully.
Click to expand...
Click to collapse
...If I Flash Stock Firmware...Will I get my Stock Recovery back??
Himan Boro said:
Thanks Bro
Will You Please Give Me The Links Of Stock Recovery For Moto E and How to flash that ??
Click to expand...
Click to collapse
Himan Boro said:
...If I Flash Stock Firmware...I wilk get my Stock Recovery back??
Click to expand...
Click to collapse
Extract your stock ROM, you will find a "recovery.img" file. Thats your stock recovery.
To flash it, you need to boot into fastboot and run the command,
Code:
fastboot flash recovery recovery.img
Yes, flashing your stock ROM will also flash the stock recovery back.You will lose all your data on the device though, so it is not recommended if you need recovery only.
neo.ank said:
Extract your stock ROM, you will find a "recovery.img" file. Thats your stock recovery.
To flash it, you need to boot into fastboot and run the command,
Code:
fastboot flash recovery recovery.img
Yes, flashing your stock ROM will also flash the stock recovery back.You will lose all your data on the device though, so it is not recommended if you need recovery only.
Click to expand...
Click to collapse
thanks buddy + pressed
Hey bro thnx man but if flashed stock rom will i get the ota ??? Thnx man in advance
Sent from my XT1022 using XDA Free mobile app
vrishabhs09 said:
Hey bro thnx man but if flashed stock rom will i get the ota ??? Thnx man in advance
Sent from my XT1022 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, you will.
New Question
Hi and thanks for the post in have found a solution that is how can i have stock recovery back but before i continue to custom rom in my galaxy s4 at&t rooted i need to know that what is locked or unlocked bootloader means my device also supports other network than at&t and how can i get root access in that custom rom and can i just simply get stock recovery and rom by flashing it with twrp. Thanks!.
Himan Boro said:
thanks buddy + pressed
Click to expand...
Click to collapse
Hey can you share your stock recovery.img pls. Is it for Lollipop
hey please tell me i changed my software by twrp to 4.4.4 to 5.0.1 now then i changed to miui 7 and now i want to reset my factory data how can i reset it i dont have any update zip file and i want to fully change my mobile to my old version i dont want this non sense
Got an moto E update and twrp causing problem
Hey guys I am facing a problem I have rooted my MOTO E device a long ago and after 6 to 7 months I got an software update from Motorola then I installed it but now after shutting down it gets stuck at TWRP flash menu. I don't what to do next then I just shutoff the phone from reboot menu in TWRP but again after restart it when to shutdown in 4 minutes. Please help . Anyway to uninstall the TWRP or cancell that update.
Please help
chetantulsyan said:
Hey guys I am facing a problem I have rooted my MOTO E device a long ago and after 6 to 7 months I got an software update from Motorola then I installed it but now after shutting down it gets stuck at TWRP flash menu. I don't what to do next then I just shutoff the phone from reboot menu in TWRP but again after restart it when to shutdown in 4 minutes. Please help . Anyway to uninstall the TWRP or cancell that update.
Please help
Click to expand...
Click to collapse
By accepting the update, you have done a mistake. You can resolve it by flashing stock firmware or flashing a custom rom
Sent from my Moto E
drs22 said:
By accepting the update, you have done a mistake. You can resolve it by flashing stock firmware or flashing a custom rom
Sent from my Moto E
Click to expand...
Click to collapse
Thanks for replying. Yes, Exactly I have done that only and I have changed it to stock rom with kitkat 4.4.2 but then again software update came so I thought now, I'll change it to lollipop again but now my device is dead. It's not turning on and even fastboot is also not working. Don't know what to do ? Can you please help in this now.
chetantulsyan said:
Thanks for replying. Yes, Exactly I have done that only and I have changed it to stock rom with kitkat 4.4.2 but then again software update came so I thought now, I'll change it to lollipop again but now my device is dead. It's not turning on and even fastboot is also not working. Don't know what to do ? Can you please help in this now.
Click to expand...
Click to collapse
Again a mistake. Revert to stock again. Also check this info:
http://forum.xda-developers.com/showthread.php?t=3062859
Also, do you mean you are unable to access bootloader?
Sent from my Moto E
drs22 said:
Again a mistake. Revert to stock again. Also check this info:
http://forum.xda-developers.com/showthread.php?t=3062859
Also, do you mean you are unable to access bootloader?
Sent from my Moto E
Click to expand...
Click to collapse
Yes exactly even bootloader is not turning on. I am pressing volume down and power button but it's not turning on. That's why I am helpless like what to do when bootloader is not working otherwise I would have done that.
chetantulsyan said:
Yes exactly even bootloader is not turning on. I am pressing volume down and power button but it's not turning on.
Click to expand...
Click to collapse
That's a weird problem. Keep on checking again. If it still doesn't turn on, you have no other option other than taking it to service center
Sent from my Moto E
drs22 said:
That's a weird problem. Keep on checking again. If it still doesn't turn on, you have no other option other than taking it to service center
Sent from my Moto E
Click to expand...
Click to collapse
Ok. Thank You so much for the guidance. I'll do that now. But My laptop is detecting by phone even in off mode. Like when I connect it to my PC a sound comes but nothing really working on.
Anyway, Thank you so much
chetantulsyan said:
Ok. Thank You so much for the guidance. I'll do that now. But My laptop is detecting by phone even in off mode. Like when I connect it to my PC a sound comes but nothing really working on.
Anyway, Thank you so much
Click to expand...
Click to collapse
Ok . press the thanks button then....!
Sent from my Moto E
Dear Devs,
I have a dual sim indian variant of moto e 1st gen. I had flashed a custom rom CM11 and was using furnace kernel.
SInce i decided to sell the phone, i decided to restore it back to stock. while doing so following the guides given in this forum, i was stuck at a place where something like boot.img or what i dont exactly remember, failed to flash and since then i am stuck on bootloop.
have tried all ways everything but unsuccessful. i am thinking of giving the phone in service center but want to try to restore it to stock one last time
WHENEVER I FLASH, ALL GOES WELL UNTIL - FAILED TO VALIDATE SYSTEM IMAGE
please help me
These are some screenshots.
The broken android comes when I try to get into recovery.
Then there is the cm logo of bootloop
And there is the download mode.
Please help
TacTieTee said:
Dear Devs,
I have a dual sim indian variant of moto e 1st gen. I had flashed a custom rom CM11 and was using furnace kernel.
SInce i decided to sell the phone, i decided to restore it back to stock. while doing so following the guides given in this forum, i was stuck at a place where something like boot.img or what i dont exactly remember, failed to flash and since then i am stuck on bootloop.
have tried all ways everything but unsuccessful. i am thinking of giving the phone in service center but want to try to restore it to stock one last time
please help me
Click to expand...
Click to collapse
If you have a custom recovery installed (which I suppose you do) the flash Strix's stock ROM zip(you ll get it under the development thread) , for the time being that ll do, and if you want to go back entirely to stock (including stock recovery) follow the steps one more time carefully, download the firmware of your device and use mfastboot, everything should be fine(I have myself done that)
Hit Thanks if that was helpful
thanks for the lead am going to update what happens next in the thread thanx again
sagnik9 said:
If you have a custom recovery installed (which I suppose you do) the flash Strix's stock ROM zip(you ll get it under the development thread) , for the time being that ll do, and if you want to go back entirely to stock (including stock recovery) follow the steps one more time carefully, download the firmware of your device and use mfastboot, everything should be fine(I have myself done that)
Hit Thanks if that was helpful
Click to expand...
Click to collapse
Actually, how am i supposed to flash the ROM when i cannot access my sd only? Except for download mode, i cannot access anything on my phone. nonetheless, ill try to flash it as per the instructions again.
TacTieTee said:
Actually, how am i supposed to flash the ROM when i cannot access my sd only? Except for download mode, i cannot access anything on my phone. nonetheless, ill try to flash it as per the instructions again.
Click to expand...
Click to collapse
If you have a custom recovery, like twrp, you must be able go access your SD card, try entering into the recovery mode
Hit Thanks if that was helpful
sagnik9 said:
If you have a custom recovery, like twrp, you must be able go access your SD card, try entering into the recovery mode
Hit Thanks if that was helpful
Click to expand...
Click to collapse
in my first picture attached, that is the screen i get when i try to access recovery from download mode
OK so i guess i was able to restore it back but i just cant re lock the bootloader
I have TWRP in my A310. Flashed http://forum.xda-developers.com/a310/development/resurrection-remix-lp-5-5-t3160496 this rom, dunno which version TWRP I have, so now phone is not starting up.
Any help will be appreciated, Guys I don't want to take my phone to Service center ppl. They are horrible.
Phone is turning on, trying to boot - failing - restarting - trying to enter recovery as a TWRP logo shows up then screen flickers and nothing happens and this keeps going on. TWRP also tries to open MTP but that fails too.
Dosen't stay in Bootloader - fastboot as well, restarts.
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Thanks for quick reply
shaijuvjohn said:
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Click to expand...
Click to collapse
No, I am not able to go to recovery.
A quick question to those who have used YGDP, Does it work while is switched off ?
headlessNick said:
No, I am not able to go to recovery.
A quick question to those who have used YGDP, Does it work while is switched off ?
Click to expand...
Click to collapse
Do you have the backup of previous rom?
If you are going to flash stock rom, gydp tool will detect the phone even without battery too.
shaijuvjohn said:
Do you have the backup of previous rom?
If you are going to flash stock rom, gydp tool will detect the phone even without battery too.
Click to expand...
Click to collapse
Let me check that when I get back home and let you know, I must have backups If GYDY worked, then we shall party :angel::cyclops::highfive:
Can someone point to a GYDP guide, I found one but the download links don't work :cyclops:
headlessNick said:
Let me check that when I get back home and let you know, I must have backups If GYDY worked, then we shall party :angel::cyclops::highfive:
Click to expand...
Click to collapse
Try YGDP and flash stock and then restore the backup if available.
When you flash the stock rom it will repalce the twrp also. We can easily install twrp through ygdp. Follow the steps.
1. Select your .cpb file and apply
2. YGDP will unzip the cpb file, path may be C:\YLXZGJ\YGDP\DownFiles\8297W (in my system this is the path, please check after unzipping)
3. Check the unzipped folder contents
4. There will be a file named recovery.img
5. Delete the recovery.img file
6. Copy your twrp recovery to the unzipped folder and rename it to recovery.img
7. Click on start button
8. Remove battery from your phone and connect it to the usb
9. It will detect your phone and start flashing
10. Wait for flashing finishes to 100 %
11. Done. Disconnect phone. You flashed stock rom with twrp recovery
12. Copy the backup to memory card and insert it in phone
12. Insert battery and press power button and volume up key, go to twrp recovery, restore your backup and enjoy
---------- Post added at 12:00 PM ---------- Previous post was at 11:56 AM ----------
headlessNick said:
Can someone point to a GYDP guide, I found one but the download links don't work :cyclops:
Click to expand...
Click to collapse
http://www.needrom.com/wp-content/uploads/2014/10/YGDP_Setup_V3.83_Assembly.zip
Try this one, i am using this one on A311.
You need to have these drivers installed in your system - DA USB VCOM Port, PreLoader USB VCOM (Android)
If you have drivers not installed use the below one from the attachment. :victory:
Thanks - Tying...
headlessNick said:
Thanks - Tying...
Click to expand...
Click to collapse
Thanks a lot guys especially
shaijuvjohn said:
shaijuvjohn
Click to expand...
Click to collapse
, I should have probably read all the instructions, It was all there. Had some difficulties in installing the drivers as COM port But at the end :victory: works like charm.
I will definitely spread this knowledge with who ever needs in future.
Proud owner of stocked rooted custom recovery MMX Nitro A310 and OnePlus One
headlessNick said:
Thanks a lot guys especially , I should have probably read all the instructions, It was all there. Had some difficulties in installing the drivers as COM port But at the end :victory: works like charm.
I will definitely spread this knowledge with who ever needs in future.
Proud owner of stocked rooted custom recovery MMX Nitro A310 and OnePlus One
Click to expand...
Click to collapse
Yup because i already went through all these situations and i know the difficulties. That is why i gave you each steps. Always Happy to HELP. :victory:
didnt worked
shaijuvjohn said:
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Click to expand...
Click to collapse
I hv tried to installed from ygdp stock rom but it stopped in between. The process wont complete, plz help me if u can
Micromax q391
My Micromax canvas q391 not working its just stuck on the Micromax logo n I'm not even able to access the recovery mode n does not have the backup of rom
What can I do to start it up please help
Even I tried to Flash with YGDP but no use. My mobile is not stable suddenly and automatically it disconnects from my system even connected with USB Cable.
..
WHen I open the link a page comes up saying " Needrom do not authorizing, the links referred by another website for download the ROMs.
The link must obligatory be clicked from of Needrom.com
"
What should I do....
same problrm faced
headlessNick said:
I have TWRP in my A310. Flashed http://forum.xda-developers.com/a310/development/resurrection-remix-lp-5-5-t3160496 this rom, dunno which version TWRP I have, so now phone is not starting up.
Any help will be appreciated, Guys I don't want to take my phone to Service center ppl. They are horrible.
Phone is turning on, trying to boot - failing - restarting - trying to enter recovery as a TWRP logo shows up then screen flickers and nothing happens and this keeps going on. TWRP also tries to open MTP but that fails too.
Dosen't stay in Bootloader - fastboot as well, restarts.
Click to expand...
Click to collapse
i had faced same problem ..
but stay calm .. just download ypdp flash tool .. download stock rom and flash it using ypdp tool ... remember while flashing remove the battery otherwise it will not detect the phone , as my was not detected .. but as soon i removed the battery , it flashed the rom in couple of minutes . and after flashing remember to flash a custom rom as the stock rom gets corrupted causing these issues .. installed darkeness redefined rom and it is woking extremely fast , best rom in my opinion . choise is upon you ,
Hope my message helped you , for any more questions do ask.
boot loop
i have the same problem boot loop but im not able to flash becoz my micromax canvas nitro a311 disconnecting continuously on lap im not able to open recovery mode also help:fingers-crossed: