Q&A for [TWRP][Surnia] Moto E 2015 Recovery
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TWRP][Surnia] Moto E 2015 Recovery. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
ssdd as dj above, boost mobile xt1526 lte/4g xt1526, doesn't work with the xt1524 version, nor does the stock recovery.img from the xt1524 posted in the firmware pages work. All 3 version of twrp i've tried (condor, surnia, and current standard vversion) fail and being a dumbass I didn't think to back up before ****ing with it... didn't realize it was *quite* this new a phone.
phliptrip said:
ssdd as dj above, boost mobile xt1526 lte/4g xt1526, doesn't work with the xt1524 version, nor does the stock recovery.img from the xt1524 posted in the firmware pages work. All 3 version of twrp i've tried (condor, surnia, and current standard vversion) fail and being a dumbass I didn't think to back up before ****ing with it... didn't realize it was *quite* this new a phone.
Click to expand...
Click to collapse
Its very new, not much development yet. Hopefully moto drops source soon as im getting bored.
I can confirm that the twrp recovery works for the cmda boost mobile variant. Flashed super user now I'm rooted and ready to help kick start development. I've tried a lot of commands to dump system and boot but all I get is permission denied
---------- Post added at 02:57 PM ---------- Previous post was at 02:07 PM ----------
bzo22 said:
I can confirm that the twrp recovery works for the cmda boost mobile variant. Flashed super user now I'm rooted and ready to help kick start development. I've tried a lot of commands to dump system and boot but all I get is permission denied
Click to expand...
Click to collapse
U have to boot recovery do not flash it
How do I extract boot.IMG . I've tried a couple of methods but no luck
TWRP works, but not SuperSU
I have the US Moto E 4G/LTE (XT1527).
I've installed this TWRP recovery image successfully, and am trying to use it to install SuperSU. After installing SuperSU 2.23 (Beta), I can't seem to boot SuperSU. If I reboot into recovery, it goes right back to TWRP. Am I missing something?
verified: sideload works
FYI - i was able to sideload SuperSU successfully using this recovery. So that works.
bzo22 said:
I can confirm that the twrp recovery works for the cmda boost mobile variant. Flashed super user now I'm rooted and ready to help kick start development. I've tried a lot of commands to dump system and boot but all I get is permission denied
---------- Post added at 02:57 PM ---------- Previous post was at 02:07 PM ----------
U have to boot recovery do not flash it
Click to expand...
Click to collapse
I'm curious... Did you have any problems unlocking your boatloader, cuz I'm having a HELL of a time
soxtober05 said:
I'm curious... Did you have any problems unlocking your boatloader, cuz I'm having a HELL of a time
Click to expand...
Click to collapse
No not really I did straight from the Motorola website
brfe said:
I have the US Moto E 4G/LTE (XT1527).
I've installed this TWRP recovery image successfully, and am trying to use it to install SuperSU. After installing SuperSU 2.23 (Beta), I can't seem to boot SuperSU. If I reboot into recovery, it goes right back to TWRP. Am I missing something?
Click to expand...
Click to collapse
how did you get the bootloader unlocked to flash TWRP? I am having beyond a hell of a time trying to get my bootloader unlocked. Been through the absolute ringer with Motorola and with my provider.
johnnymayer said:
how did you get the bootloader unlocked to flash TWRP? I am having beyond a hell of a time trying to get my bootloader unlocked. Been through the absolute ringer with Motorola and with my provider.
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-e-2015/general/guide-unlock-bootloader-moto-e-2015-t3045748
If you have a Verizon model, it cannot be unlocked.
Hi..I have a Moto E XT1526 surnia with an unlocked boot loader.. Unfortunately I have no way of getting access to a PC, so my question is can I flash the recover in anyway without a computer? I doubt this is possible at the moment? Have done some searching with no luck but desperately need this phone rooted, thanks.
Confirming that backup works using TWRP. SuperSU also works.
This if for XT1526 Boost Mobile.
Now for some custom Roms.
If a Dev need anything extracted let me know.
---------- Post added at 10:00 PM ---------- Previous post was at 09:50 PM ----------
Also can someone compile a list of apps safe to remove (Boost Mobile)
Heather4ever said:
Hi..I have a Moto E XT1526 surnia with an unlocked boot loader.. Unfortunately I have no way of getting access to a PC, so my question is can I flash the recover in anyway without a computer? I doubt this is possible at the moment? Have done some searching with no luck but desperately need this phone rooted, thanks.
Click to expand...
Click to collapse
Not possible yet unfortunately. Soon enough this phone will have much support like the moto g has.
Until then flashing with adb command via PC is the only route.
Just to say thanks ^^ everything works well in xt1527 model, though I tried restoring a backup of my stock ROM and it didn't worked. It got stuck loading after bootanimation. Any ideas?
Soft-bricked
Is this recovery supports 16GB Moto E 2015(XT1523)?
I flashed the recovery, but I can`t boot into recovery.
I booted into recovery with ./fastboot boot recovery.img. Then I flashed the Squid kernel and SuperSU. Then I rebooted to system and not out of the Motorola logo. I only can acess to fastboot. :crying:
Liang Sek King said:
Is this recovery supports 16GB Moto E 2015(XT1523)?
I flashed the recovery, but I can`t boot into recovery.
I booted into recovery with ./fastboot boot recovery.img. Then I flashed the Squid kernel and SuperSU. Then I rebooted to system and not out of the Motorola logo. I only can acess to fastboot. :crying:
Click to expand...
Click to collapse
Hmm, what happens when you try to boot the recovery you flashed? It just shows the bootloader unlocked logo?
If nothing else works, flash back the stock ROM for your model using fastboot:
http://www.filefactory.com/file/64b...LXI22.50-53_cid12_subsidy-DEFAULT_CFC.xml.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm trying to flash twrp but it won't stick I unlock boot loader without no problems now I'm working on twrp how do I flash it so I can flash superuser can I get a step by step method on this
crazynapkinman said:
Confirming that backup works using TWRP. SuperSU also works.
This if for XT1526 Boost Mobile.
Now for some custom Roms.
If a Dev need anything extracted let me know.
---------- Post added at 10:00 PM ---------- Previous post was at 09:50 PM ----------
Also can someone compile a list of apps safe to remove (Boost Mobile)
Click to expand...
Click to collapse
How did u stick twrp I try to do it but seems isn't working for me
Flashed using adb. Place the recovery.img in adb folder with fastboot. Open cmd at that location (shift+right click, open cmd prompt...)
Type the following in command prompt: fastboot flash recovery recovery.img
Make sure twrp file is named "recovery.img"
Related
Hello guys,
I'm glad that we finally get lollipop for our device Lenovo A6000/Plus.
Some people want to get superuser privilege, but still confuse how to install/flash it.
Here's how to get root:
What is needed:
Your Lenovo A6000/Plus (Lollipop)
PC (windows)
Download this tools (contains adb, fastboot, supersu, custom recovery)
How to root:
Enter to fastboot
Turn off your phone
Hold on the volume - key and hold on the power button
Wait until lenovo logo appears with small text "Powerkey long press can reboot phone" at the bottom of the screen
Connect your phone to your PC
Extract the tools
Open command.bat
Type "fastboot boot recovery.img" (without quotes). Wait until you land on TWRP recovery
Choose Advanced -> ADB Sideload -> swipe to start sideload
Type "adb sideload SuperSU.zip" (without quotes)
Reboot
Thanks to:
Google (ADB and Fastboot)
chainfire (SuperSU)
duniamodandroid.blogspot.com (TWRP, I don't know who created it)
NB: It can be applied to both firmware version (S052 and S028)
Thanks. Great guide. My phone is now rooted finally.
is it safe???
zhily said:
is it safe???
Click to expand...
Click to collapse
Yes it's safe with superuser. Don't root via kingroot it as it fails to unroot the phone.
Thanks buddy but the adb sideload command didnt work. So I placed superSU.zip it in the internal sdcard and then clicked on the install button. Thanks a lot. :good:
ashutoshtaikar said:
Thanks buddy but the adb sideload command didnt work. So I placed superSU.zip it in the internal sdcard and then clicked on the install button. Thanks a lot. :good:
Click to expand...
Click to collapse
how to do it, mine adb sideload not working too.
thanks for any help
---------- Post added at 10:53 AM ---------- Previous post was at 10:46 AM ----------
oke done.... copy superSu to internal, install from twrp... done
thanks
Can we permanently flash TWRP ,replacing the OEM recovery? Does anyone tried it?Any issues?
Another Version?
Will it work on version S030 ?
averagegeek said:
Can we permanently flash TWRP ,replacing the OEM recovery? Does anyone tried it?Any issues?
Click to expand...
Click to collapse
I think no, Cuz twrp that we install are temporary. But if we can find or even make the permanent twrp for our device maybe that's should possible. Correct me if I'm wrong
McBubu_1337 said:
Will it work on version S030 ?
Click to expand...
Click to collapse
I'm sorry, I can't confirm that coz now I'm using kitkat ROM (MIUI 7)
averagegeek said:
Can we permanently flash TWRP ,replacing the OEM recovery? Does anyone tried it?Any issues?
Click to expand...
Click to collapse
McBubu_1337 said:
I think no, Cuz twrp that we install are temporary. But if we can find or even make the permanent twrp for our device maybe that's should possible. Correct me if I'm wrong
Click to expand...
Click to collapse
Yes you can. Please try TWRP recovery for lollipop by JAVTeam. here is the link
McBubu_1337 said:
I think no, Cuz twrp that we install are temporary. But if we can find or even make the permanent twrp for our device maybe that's should possible. Correct me if I'm wrong
Click to expand...
Click to collapse
Permanent TWRP is possible. We have to use a different command in fastboot
In the fastboot, run the command
fastboot flash recovery recovery.img
where recovery.img is the TWRP image
Sent from my Lenovo A6000 using Tapatalk
Mr. AW said:
Yes you can. Please try TWRP recovery for lollipop by JAVTeam. here is the link
Click to expand...
Click to collapse
Wow, thanks for your info. I will check it
---------- Post added at 01:38 PM ---------- Previous post was at 01:33 PM ----------
Mr. AW said:
I'm sorry, I can't confirm that coz now I'm using kitkat ROM (MIUI 7)
Click to expand...
Click to collapse
What's happen if it doesn't work? Just bootloop or brick?
And thanks for your big help for me
---------- Post added at 01:42 PM ---------- Previous post was at 01:38 PM ----------
averagegeek said:
Permanent TWRP is possible. We have to use a different command in fastboot
In the fastboot, run the command
fastboot flash recovery recovery.img
where recovery.img is the TWRP image
Sent from my Lenovo A6000 using Tapatalk
Click to expand...
Click to collapse
Well, I might try your suggestions. Thanks a lot
McBubu_1337 said:
What's happen if it doesn't work? Just bootloop or brick?
And thanks for your big help for me
Click to expand...
Click to collapse
It can be vary, please try it by yourself.
for safety, backup first. flash and boot to custom recovery (twrp from javteam), do backup. after that, just flash supersu zip.
if something wrong (ex, bootloop), you can restore you rom.
NB: As I remember, I've tried firmware S30 and I can root successfully. I forgot it coz I just flash it and I was not satisfied then go back to kitkat.
Mr. AW said:
It can be vary, please try it by yourself.
for safety, backup first. flash and boot to custom recovery (twrp from javteam), do backup. after that, just flash supersu zip.
if something wrong (ex, bootloop), you can restore you rom.
NB: As I remember, I've tried firmware S30 and I can root successfully. I forgot it coz I just flash it and I was not satisfied then go back to kitkat.
Click to expand...
Click to collapse
Thanks, I will update my firmware first. After that I will try to install TWRP and root my phone.
Your phone will bricked or may be like ths ,i am 100% sure in that
http://droidheap.blogspot.com/2015/12/lenovo-a6000-plus-storage-problems.html
hey developers ,we got new problem with this lenovo smartphone which is mentioned in droidheap blog.
---------- Post added at 02:31 AM ---------- Previous post was at 02:17 AM ----------
http://droidheap.blogspot.com/2015/12/lenovo-a6000-plus-storage-problems.html new problems with the phone has been discovered
Just make it straight
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There's no problem with system space, you might try other update package version. I am using s030
Mr. AW said:
Yes you can. Please try TWRP recovery for lollipop by JAVTeam. here is the link
Click to expand...
Click to collapse
It's safe? Cuz' i don't see lenovo a6000/plus listed on device tab.
I'm sorry asking so much, cuz' i don't have enough connection to download stock firmware in case my phone brick or bootloop
McBubu_1337 said:
It's safe? Cuz' i don't see lenovo a6000/plus listed on device tab.
I'm sorry asking so much, cuz' i don't have enough connection to download stock firmware in case my phone brick or bootloop
Click to expand...
Click to collapse
Yes, It's safe. I've tried it
If you're afraid you can flash this TWRP temporary. It won't change your recovery partition.
If something not right, just restart your device.
Mr. AW said:
Yes, It's safe. I've tried it
If you're afraid you can flash this TWRP temporary. It won't change your recovery partition.
If something not right, just restart your device.
Click to expand...
Click to collapse
Thank you very much. Have you try to install xposed on your device?
This is the LG G6's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Install APKs
Uninstall APKs
Take a Screenshot
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Good Job!
TheWolfSVK said:
Good Job!
Click to expand...
Click to collapse
Thanks, have you tried it?
mauronofrio said:
Thanks, have you tried it?
Click to expand...
Click to collapse
Downloading it atm
Anyone tried this on LG G6?
This can relock G6 bootloader like for warranty purpose?
Which functions are available/unavailable for G6
The only functions that are not available are flash stock recovery and flash factory image. The others are all available. Locking the bootloader you can brick your phone, the tool will send just a fastboot command. I've tested the bootloader unlocking procedure for lg g6 and twrp flash. There are a lot of others function that i've not tested but they should work (Apk Installer, reboot commands, zip flasher, ....)
mauronofrio said:
The only functions that are not available are flash stock recovery and flash factory image. The others are all available. Locking the bootloader you can brick your phone, the tool will send just a fastboot command. I've tested the bootloader unlocking procedure for lg g6 and twrp flash. There are a lot of others function that i've not tested but they should work (Apk Installer, reboot commands, zip flasher, ....)
Click to expand...
Click to collapse
Hello, sorry i'm a noob at G6 (just got it last week) i came from an easy to unlock/flash Nexus 5X, i have some questions, do i still need the LG Develpoer site to unlock bootloader? or is this done internally in your program?
outlawman007 said:
Hello, sorry i'm a noob at G6 (just got it last week) i came from an easy to unlock/flash Nexus 5X, i have some questions, do i still need the LG Develpoer site to unlock bootloader? or is this done internally in your program?
Click to expand...
Click to collapse
You always need the LG Developer site. This tool is done to simplify processes not to bypass them. With this tool you will never use the terminal anymore.
mauronofrio said:
You always need the LG Developer site. This tool is done to simplify processes not to bypass them. With this tool you will never use the terminal anymore.
Click to expand...
Click to collapse
oh, thank you will try it out when i decide to unlock and flash some custom roms ;D still quite happy with the stock rom it came with ...OR maybee when there is a working option for locking the bootloader, but i guess we will have to wait for that for some time ...
outlawman007 said:
oh, thank you will try it out when i decide to unlock and flash some custom roms ;D still quite happy with the stock rom it came with ,or maybee when there is a working option for locking the bootloader, but i guess we will have to wait for that for some time...
Click to expand...
Click to collapse
The command is there but you can brick your phone. I think you need of a QFIL stock rom to relock bootloader. But i think Lg has a database with all device unlocked...
Awsome tool!
It would be cool if we could lock the bootloader without fear of the dreaded brick
tron4200 said:
It would be cool if we could lock the bootloader without fear of the dreaded brick
Click to expand...
Click to collapse
Yes sure, when there will be a safe guide, it will also be safe to lock the bootloader
Will give this a try once someone has tried it some more.
Just tried to unlock my g6. It works. Then I tried to flash recovery, but, maybe I'd have had to reboot phone prior to flash recovery, infact after reboot the recovery installed was the stock one. So I flashed it via fastboot command manually...
Anyway, simple and working. Gread job!
galerio said:
Just tried to unlock my g6. It works. Then I tried to flash recovery, but, maybe I'd have had to reboot phone prior to flash recovery, infact after reboot the recovery installed was the stock one. So I flashed it via fastboot command manually...
Anyway, simple and working. Gread job!
Click to expand...
Click to collapse
Thanks for feedback, can you please tell me what recovery you have installed through fastboot?? Maybe the recovery in the tool ai wrong or have problems.
Have tried the H870 one, TWRP 3.1.1, the one that the software automatically download from server. The final message saied it was installed correctly, but after reboot, normal recovery was presented (the one that reset phone to factory reset, and infact it has resetted the phone)
---------- Post added at 01:34 PM ---------- Previous post was at 01:15 PM ----------
mauronofrio said:
Thanks for feedback, can you please tell me what recovery you have installed through fastboot?? Maybe the recovery in the tool ai wrong or have problems.
Click to expand...
Click to collapse
Maybe the problem was not your software... Now that I am in twrp I have transferred a rom in the internal storage, I have installed it, but phone is in bootloop. And now, entering in twrp it says the storage is encrypted and asks me for the password.... now, what to do??? Damn...
galerio said:
Have tried the H870 one, TWRP 3.1.1, the one that the software automatically download from server. The final message saied it was installed correctly, but after reboot, normal recovery was presented (the one that reset phone to factory reset, and infact it has resetted the phone)
---------- Post added at 01:34 PM ---------- Previous post was at 01:15 PM ----------
Maybe the problem was not your software... Now that I am in twrp I have transferred a rom in the internal storage, I have installed it, but phone is in bootloop. And now, entering in twrp it says the storage is encrypted and asks me for the password.... now, what to do??? Damn...
Click to expand...
Click to collapse
Format data from twrp
@mauronofrio Ok, I solved and reinstalled from scratch everything. What went wrong, I think, is that after TWRP installation I haven't installed Magisk immediately.
Using a tool like your can induce people to just push a button and not follow every step of a good unlocking procedure. Anyway, it was my fault. Your tool works perfectly
9.8.15
https://sourceforge.net/projects/xi....eu_multi_HMK20MI9T_9.8.15_v10-9.zip/download
https://androidfilehost.com/?fid=6006931924117937562
9.8.8
https://sourceforge.net/projects/xi...i.eu_multi_HMK20MI9T_9.8.8_v10-9.zip/download
https://androidfilehost.com/?fid=6006931924117932956
9.8.1
https://sourceforge.net/projects/xi...i.eu_multi_HMK20MI9T_9.8.1_v10-9.zip/download
https://androidfilehost.com/?fid=6006931924117929246
9.7.25
https://sourceforge.net/projects/xi....eu_multi_HMK20MI9T_9.7.25_v10-9.zip/download
https://androidfilehost.com/?fid=6006931924117924533
9.7.18
https://sourceforge.net/projects/xi....eu_multi_HMK20MI9T_9.7.18_v10-9.zip/download
https://androidfilehost.com/?fid=6006931924117919696
New links will be posted here.
Cool, finally dev roms are coming out! Will test in the weekend if I have time
So I'm currently on the latest "stable". I know that the "weekly" is supposed to have lil bugs and probably newer features etc. But the version numbers between the two are confusing me. Are the weekly builds in fact more up to date despite being an older version?
Yes, the weekly builds use the release date as a version number, so 9.7.18 = 2019, July 18th
ahhh, thanks god
Can we dirty flash over stable eu rom ?
Never tried on this particular phone, but personally I would do a clean flash, just to be safe
Hey,
Thanks for the links.
Doesn't Xiaomi stop releasing dev ROM updates? (correct me if wrong plz)
Do you know if this line of dev ROMs will be updated weekly?
Thanks.
Anyone tested it? Someone on telegram wrote that he bricked the phone and can't fix it after installation of xiaomi.eu beta.
Edit.
It's working. Dirty flash (without any format) from newest xiaomi.eu stable version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Zenderable said:
Anyone tested it? Someone on telegram wrote that he bricked the phone and can't fix it after installation of xiaomi.eu beta.
Edit.
It's working. Dirty flash (without any format) from newest xiaomi.eu stable version.
Click to expand...
Click to collapse
I flashed over latest xiaomi.eu stable but I have a problem booting into TWRP. Do you have the same problem? Can you check if you can boot into TWRP? Even flashing again TWRP in fastboot mode doesn't work correctly.
i flashed this developer rom, over stable, but i did clean install.
some changes in settings, i like this new style it is as i have a new phone.
Zenkrey said:
I flashed over latest xiaomi.eu stable but I have a problem booting into TWRP. Do you have the same problem? Can you check if you can boot into TWRP? Even flashing again TWRP in fastboot mode doesn't work correctly.
Click to expand...
Click to collapse
I can't boot to TWRP too, I will try fastboot method later
Zenderable said:
I can't boot to TWRP too, I will try fastboot method later
Click to expand...
Click to collapse
It won't work. I tried everything. If you get stuck into a bootloop after trying to flash TWRP, you have to type the command "fastboot continue" in the terminal (while being in fastboot, obviously) to get out of the bootloop. Anyway, I'm resetting through mi flash tool to the global and then reflash twrp -> miui.eu stable (this time, weekly is bad currently) -> magisk.
---------- Post added at 07:38 PM ---------- Previous post was at 07:35 PM ----------
slavke1976 said:
i flashed this developer rom, over stable, but i did clean install.
some changes in settings, i like this new style it is as i have a new phone.
Click to expand...
Click to collapse
Can you boot into TWRP?
Zenkrey said:
It won't work. I tried everything. If you get stuck into a bootloop after trying to flash TWRP, you have to type the command "fastboot continue" in the terminal (while being in fastboot, obviously) to get out of the bootloop. Anyway, I'm resetting through mi flash tool to the global and then reflash twrp -> miui.eu stable (this time, weekly is bad currently) -> magisk.
---------- Post added at 07:38 PM ---------- Previous post was at 07:35 PM ----------
Can you boot into TWRP?
Click to expand...
Click to collapse
flashed over stable, now i can't boot to twrp too
Master_T said:
Yes, the weekly builds use the release date as a version number, so 9.7.18 = 2019, July 18th
Click to expand...
Click to collapse
Ahhh i see. That makes sense.
Zenkrey said:
OP should edit the main post then, because otherwise people will keep flashing this broken rom. For everyone else, if you want to fix the problem you need to reset using Mi Flash tool.
Click to expand...
Click to collapse
why this rom is broken? i dont have any problem with rom, works very well.
slavke1976 said:
why this rom is broken? i dont have any problem with rom, works very well.
Click to expand...
Click to collapse
Hey just saw your post on xiaomi.eu forum, what did you do exactly, Dirty flash ? Clean flash ? just flash the rom without magisk ? or with magisk ... ? I have the Mi 9t and can't boot into twrp (even after reflashing it with fastboot) or boot into the rom... to boot into the rom i have to do fastboot cmd..
Zenkrey said:
It won't work. I tried everything. If you get stuck into a bootloop after trying to flash TWRP, you have to type the command "fastboot continue" in the terminal (while being in fastboot, obviously) to get out of the bootloop. Anyway, I'm resetting through mi flash tool to the global and then reflash twrp -> miui.eu stable (this time, weekly is bad currently) -> magisk.
---------- Post added at 07:38 PM ---------- Previous post was at 07:35 PM ----------
Can you boot into TWRP?
Click to expand...
Click to collapse
No i cant boot into twrp, but when i try to flash again twrp by fastboot, it pass ok but cant boot twrp, and it boot well into rom, no need to use fastboot metod
slavke1976 said:
No i cant boot into twrp, but when i try to flash again twrp by fastboot, it pass ok but cant boot twrp, and it boot well into rom, no need to use fastboot metod
Click to expand...
Click to collapse
Then you have a problem with the rom, hence the rom is broken. A functional rom should be compatible with TWRP. I doubt this dev rom has been tested properly.
Zenkrey said:
Then you have a problem with the rom, hence the rom is broken. A functional rom should be compatible with TWRP. I doubt this dev rom has been tested properly.
Click to expand...
Click to collapse
yes, sorry i didnt check before if i can boot into twrp.
dont know if this is related to rom or to twrp who is still not official.
This is the Xiaomi Redmi K20 Pro's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
mauronofrio said:
This is the Xiaomi Redmi K20 Pro's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Click to expand...
Click to collapse
Great to see this tool available for k20pro. Tweaking would be much easier now
Thank you so much for this aweeesooome project!
k20 pro
Can anyone tell me if the twrp works?
ArMaNi125 said:
Can anyone tell me if the twrp works?
Click to expand...
Click to collapse
Yes the twrp works
Has anyone successfully unlocked bootloader with this. Can it bypass the xiomi wait time
shharratth said:
Has anyone successfully unlocked bootloader with this. Can it bypass the xiomi wait time
Click to expand...
Click to collapse
You can't:crying:
Thanks
Thanks a lot, is this useful in case I brick my phone? "Soft brick" in case I installed wrong rom or bootloader?
I just got my K20 pro "Chiense" 256/8 I'm planning to try few roms, as the original one filled with bloatware and even after removing everything I don't trust the inside system codes not to have any ad push services or some data tracking service.
HELP plz!!
I flashed TWRP using this. then went to TWRP and in the program I choose (root only) and flashed magisk with the program. I rebooted my phone but it reboots to TWRP and not normal. I turned it off and back on ,but it still boots to TWRP.
help please. what to do? How do I restore it to normal (preferably without losing my data) ?
I can access fastboot and can access it with my computer.
zanin said:
I flashed TWRP using this. then went to TWRP and in the program I choose (root only) and flashed magisk with the program. I rebooted my phone but it reboots to TWRP and not normal. I turned it off and back on ,but it still boots to TWRP.
help please. what to do? How do I restore it to normal (preferably without losing my data) ?
I can access fastboot and can access it with my computer.
Click to expand...
Click to collapse
There ar the fastboot rom released directly from xiaomi
mauronofrio said:
There ar the fastboot rom released directly from xiaomi
Click to expand...
Click to collapse
can you be more specific? what exactly should I do?
---------- Post added at 01:15 PM ---------- Previous post was at 12:32 PM ----------
zanin said:
can you be more specific? what exactly should I do?
Click to expand...
Click to collapse
nevermind .I solved it. thnx anyway
Could you please make it open source? I'd like to translate it to Chinese.
Suvern said:
Could you please make it open source? I'd like to translate it to Chinese.
Click to expand...
Click to collapse
I'm planning to make it opensource, but for now i can't
zanin said:
can you be more specific? what exactly should I do?
---------- Post added at 01:15 PM ---------- Previous post was at 12:32 PM ----------
nevermind .I solved it. thnx anyway
Click to expand...
Click to collapse
What did you do to solve it? Ran into the same issue with boot looping back into twrp, haven't had a chance to try again or do some research into the exact cause.
zanin said:
can you be more specific? what exactly should I do?
---------- Post added at 01:15 PM ---------- Previous post was at 12:32 PM ----------
nevermind .I solved it. thnx anyway
Click to expand...
Click to collapse
How did u solved it?
TyrX69 said:
How did u solved it?
Click to expand...
Click to collapse
Flash Chinese rom recovery official from xiaomi
Hello
i bought in uk a k20 pro with global rom installed and bootloader unlocked i think from the seller
With your tool can I install any rom and twrp without problems?
Thank you so much.
fabianocannizzo said:
Hello
i bought in uk a k20 pro with global rom installed and bootloader unlocked i think from the seller
With your tool can I install any rom and twrp without problems?
Thank you so much.
Click to expand...
Click to collapse
Yes
if i've understood well it doesn't work to install a working magisk tho? Looks like it send the phone to recovery loop
Can I unlock bootloader unofficially with this tool?
First download this file:
zui 11.1.021 qpst version
twrp chinese version
zui 11.5.141 OTA version
zui 11.5.182 OTA version
zui 11.5.199 OTA version
Follow This STEP:
Read This Tutorial how to use qfil, but use zui 11.1.021 qpst version for flashing
After boot into ZUI 11.1.021, finish activating etc, reboot into bootloader, and unlock bootloader Read This Tutorial
Then go back into bootloader again, and flash twrp chinese version , Read This Tutorial and DO NOT FLASH MAGISK
From bootloader select recovery and boot into twrp
After boot into twrp, copy 3 OTA files into phone storage using ADB or using MTP or OTG flashdisk
Inside twrp, click install then select zui 11.5.141 OTA version and flash it
After finish, click back button, then select zui 11.5.182 OTA version and flash it
Again after finish, click back button, then select zui 11.5.199 OTA version and flash again
Don't click reboot system after flash, just click back button until goes back into main menu, select reboot then select bootloader, you will boot into bootloader and see bootloader status is locked, then read again This Tutorial to unlock bootloader after that wait until the phone boot into 199 version, finish activating etc, and boot again into bootloader
Open folder zui 11.1.021 qpst version and find recovery.img inside there, and flash it the same way as you flash twrp
After that follow This Tutorial to lock bootloader (read the last/bottom tutorial )
Two options will show up, and select lock bootloader
Wait until finish, and now you have 199 version with locked bootloader.
I have been test this almost 3 days, and testing every feature inside this version, but since i'm not using this phone as daily driver, so i can't test all things (like 3rd party apps) atleast google apps have no problem for me.
Don't thanks for me only, since i did this based on other works
So Every THANKS and CREDITS must be go into Original Author
Original Link:
4pda firmware forum
11.1.021 qpst forum
twrp forum
11.5.141 forum
11.5.182 forum
11.5.199 forum
DO IT OWN YOUR RISK
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
what if I'am already on 11.1.0.21 st all stock no magisk with unlock bootloader can I skip step 1 and 2?
imfuzzyyy said:
what if I'am already on 11.1.0.21 st all stock no magisk with unlock bootloader can I skip step 1 and 2?
Click to expand...
Click to collapse
yes, as long as you not modified any in system
squadzone said:
yes, as long as you not modified any in system
Click to expand...
Click to collapse
yes I didn't modified anything this is from zui 10.5 then via OTA I just uninstalled those chinese apps is it ok? gonna flash later when after work
How come when im starting to update from 11.0 to 11.141 via twrp it says error 7 cant update?
Thanks for the summary of your installation, will you keep the thread updated? because I would like it!
just want to give update I successfully updated to 199 via this guide though I am already 11.1.0.21 and unlock BL I skip step 1 and 2 thank you for this wonderful guide
"Your device is corrupt. It can't be trusted and will not boot". tried 3 times and this message pops up. it will boot after i unlock the bootloader.
error 7
Pe3033 said:
How come when im starting to update from 11.0 to 11.141 via twrp it says error 7 cant update?
Click to expand...
Click to collapse
yeah same problem to
rick shinoda said:
yeah same problem to
Click to expand...
Click to collapse
I guess after you flash 11.1.021 you need to boot first on your home screen and set a passcode and fingerprint then go to twrp and flash those OTA, please update us if this method works
On my one everything works except locking bootloader .
No command is working for my devices?
Fastboot flashing lock -no work
Fastboot -i 0x2b4c oem lock - waiting for devices
I stuck temporary with 11...021 with lock bootloader after QFIL flashing.
And no any OTA update?
Any idea why fastboot command not working ?
Abang_ said:
On my one everything works except locking bootloader .
No command is working for my devices?
Fastboot flashing lock -no work
Fastboot -i 0x2b4c oem lock - waiting for devices
I stuck temporary with 11...021 with lock bootloader after QFIL flashing.
And no any OTA update?
Any idea why fastboot command not working ?
Click to expand...
Click to collapse
Im a little bit confuse why you need to lock bootloader where you already on a locked bootloader on 11.1.021?
I did all steps until step 9. Can I stop here if i want to have an unlocked bootloader?
I have the 223 update via OTA but installation failed after downloading maybe Im guessing the recovery from 11.1.021 is not comptible for this update can you please check so we can flash the correct recovery for this update?
Has anyone installed update 11.5.223? Is Google certification still working?
imfuzzyyy said:
I have the 223 update via OTA but installation failed after downloading maybe Im guessing the recovery from 11.1.021 is not comptible for this update can you please check so we can flash the correct recovery for this update?
Click to expand...
Click to collapse
yes, you cant update OTA since fingerprints build in recovery is still 11.1.021, wait till they release zui 11 recovery or do it again using twrp
I am currently on 11.5.182, unlocked bootloader with TWRP and Magisk installed.
Has anyone updated using TWRP to 199 then to 223? I understand that in order to do this, one must uninstall Magisk and restore to stock boot.img.
rick shinoda said:
yeah same problem to
Click to expand...
Click to collapse
my mobile is in loop , i dont know what i do to fix
---------- Post added 11th April 2020 at 12:09 AM ---------- Previous post was 10th April 2020 at 11:31 PM ----------
i try do this process but before pass last rom 199 shows me ERROR 7 , after error my phone is loop on Lenovo screen in version zui 11.5.182 i try use qfil to recovery but no sucess i dont know do to fix this trouble HELP ME
if better emailme [email protected]
No problem
IcaroMacier said:
my mobile is in loop , i dont know what i do to fix
---------- Post added 11th April 2020 at 12:09 AM ---------- Previous post was 10th April 2020 at 11:31 PM ----------
i try do this process but before pass last rom 199 shows me ERROR 7 , after error my phone is loop on Lenovo screen in version zui 11.5.182 i try use qfil to recovery but no sucess i dont know do to fix this trouble HELP ME
if better emailme [email protected]
Click to expand...
Click to collapse
Try do this tutorial. My phone no more issue error 7, if using this tutorial.
https://4pda.ru/forum/index.php?showtopic=973179&view=findpost&p=94840662
---------- Post added at 02:44 AM ---------- Previous post was at 02:42 AM ----------
Now i use lineage os 17 better than zui 11.5
squadzone said:
yes, you cant update OTA since fingerprints build in recovery is still 11.1.021, wait till they release zui 11 recovery or do it again using twrp
Click to expand...
Click to collapse
So locking the bootloader is useless since we cannot update using this recovery now we need to unlock again and flash the needed recovery and relock again wew what a pain. I guess you need to remove that step in locking the bootloader again since theres no point in doing that