Hi everyone,
I have just bought the phone and everything was going fine until i plugged an AUX to my device. When I plug a AUX cable and play a media It plays through AUX for 2/3 seconds then the sound drops off and begin to play through the internal speakr. If i try to reconnect the AUX cable nothing happens. But the headphones are Working fine. And i have tried with several AUX cables. NO LUCK. The Device is running Android 4.4.2 with quad core MTK6582 chipset. This is very frustating. Do someone have this issue ? HELP NEEDED. Thanks in advance. Sorry for bad english
Related
I've got a USB charging cradle in my car which works fine.
I use a 3.5mm cable to connect my mp3 player to the car stereo which works fine.
I tried playing music from my HD to the stereo whilst charging and I get awful white noise and a constant pinging noise. If I take the phone off the charger it works fine. I can't find anything in the wiki or forums and I've seen some people on other forums with the same problem.
Anyone know what is wrong with this setup or I need a different spec cable (I guess its a standard stereo 3.5mm cable, so 3 contacts and I think the HTC one has 4 coz of the mic, but it works fine when I stop charging it. I guess it could also be a problem with the pins on the USB charger, but I thought the HD didn't have the extUSB connection.
I'm off to the USA on Sunday with a hire car so it would be really handy to be able to charge and play music!
One morning I got up and tried to plug my earphones, and I couldn't! The plug just won't come to the end! I played with screwdriver in audio jack as I thought maybe something got stuck in there, but still the same. Has anyone experienced this problem?
I have same issue with audio lead in my car, it won't fully insert and will only output through cable if I turn the cable around when inserted as much as I can.
Sent from my Atrix Neutrino [email protected]
Something weird is going on here.
I have just bought an aux-in cable (ai-net to 3.5mm jack) to plug my phone (Wiko Darkmoon, MTK 6582 based) to my car stereo (JVC G511), but the phone doesn't recognize when I plug in the jack.
However, if I turn up the volume on the car, I can hear music both from the phone speaker and from the car's.
What does this mean?
I tried also with my brother's Moto G, and it correctly plays music through the headphone jack, but with a quite low volume.
Can it be something software related? My phone has 4.2, my brother's has kitkat. Or maybe something is wrong with the cable's pinout? I opened one end of the cable and I see three wires, and this should be enough from what I got to understand.
Btw, my phone works okay with normal headphones
Hi,
I was wondering if anyone has had trouble with the FIIO Q1 DAC. My Z2 does not recognize the DAC connect via my OTG cable. If I reboot the device and start playing music and then plug the device in. Only then may the DAC be recognized. But its more miss than hit.
Should I unplug the DAC and try connect it again it will not connect until I reboot the device and try again. Was wondering if anyone has had similar issues and if there is a fix.
This issue persists on 5.0.2 -> 6.0.1
Regars
P
petrosy said:
Hi,
I was wondering if anyone has had trouble with the FIIO Q1 DAC. My Z2 does not recognize the DAC connect via my OTG cable. If I reboot the device and start playing music and then plug the device in. Only then may the DAC be recognized. But its more miss than hit.
Should I unplug the DAC and try connect it again it will not connect until I reboot the device and try again. Was wondering if anyone has had similar issues and if there is a fix.
This issue persists on 5.0.2 -> 6.0.1
Regars
P
Click to expand...
Click to collapse
I once was at a huge meetup with a bunch of audiophiles and tried the FiiO Q1 for myself. (Great DAC/Amp btw). Anyways, it works flawlessly on my Z2. (on eXistenZ 6.0.1). Only guess is to try and factory reset? I mean it worked even if I played music then plugged it in, or plug it in first then play music.
iArvee said:
I once was at a huge meetup with a bunch of audiophiles and tried the FiiO Q1 for myself. (Great DAC/Amp btw). Anyways, it works flawlessly on my Z2. (on eXistenZ 6.0.1). Only guess is to try and factory reset? I mean it worked even if I played music then plugged it in, or plug it in first then play music.
Click to expand...
Click to collapse
Thanks for the response. I have tried all that except for custom roms. I have a couple of different OTG cables on order.... I am hoping that I may just have a crappy cable.
I have an Android Tablet with Android 6.0 installed in my car. My car has a aux input in the factory stereo so I've connected the USB dac (pictured in the attachment) in the DC power USB hub that connects to the tablet using the OTG cable. I further split the output of the dac to seperate the Mic and Audio. Every time the tablet wakes up from sleep the DAC is detected but there is no sound i get a buzzing like sound. If i disconnect the USB completely and plug it back in then it works perfectly. I left it unplugged and plugged it in after the tablet wakes up then it works fine. But for some reason if it's plugged in to the USB before the tablet wakes up then it gives that problem. Does anyone know what the problem can be? I forgot to mention it's connect via a short USB extension. One thing I can possibly do as a work-around is cut the power to the USB extension and have some kind of delay on it so it doesn't start up straight away when tablet wakes up.
Also, I have a high gain car mic connected to the mic side of the splitter but the mic just doesn't seem to work although the mic works when i try the DAC and same setup on my Samsung S20+.
Any help and suggestions would be great. Thanks