Obviously I'm over my head, I'll tell you what I stupidly did. I have and razr xt910, I thought oh boy how bout upgrading my rom. I went to a few different rom and they all said i needed safetrap 3.75 and up, mine use to be 3.5 i think or something like that and i was just running a stock rom. When ever i would reboot safetrap would come up and tell me if i didnt do anything in 10 sec it would just boot normally. Well he is where i goofed because i wanted a new rom i uninstalled my old safetrap successfully and install the new one but for kitkat 4.4 but I'm sure i use to be 4.1. My phone no longer boots up the new safetrap boot up and say system will start in 10 sec but does not. PPPPPPlease pplse help I over my head and don't know what to do.
My phone no longer boots up the new safetrap boot up and say system will start in 10 sec but does not. PPPPPPlease pplse help I over my head and don't know what to do.
Click to expand...
Click to collapse
Power off, Hold volume buttons (or M key/droid 4), Power on, release buttons at
Boot Mode Selection Menu> Scroll down with volume down button, to BP Tools, Select with Volume UP button, should boot directly to SafeStrap (if it's still there).
Sent from my XT912 using Tapatalk
---------- Post added at 06:27 PM ---------- Previous post was at 06:22 PM ----------
ynotbu said:
Obviously I'm over my head, I'll tell you what I stupidly did. I have and razr xt910, I thought oh boy how bout upgrading my rom. I went to a few different rom and they all said i needed safetrap 3.75 and up,
Click to expand...
Click to collapse
you need safestrap 3.75 for CM12/lollipop/android 5.0 roms
mine use to be 3.5 i think or something like that and i was just running a stock rom. When ever i would reboot safetrap would come up and tell me if i didnt do anything in 10 sec it would just boot normally. Well he is where i goofed because i wanted a new rom i uninstalled my old safetrap successfully
Click to expand...
Click to collapse
you need to open old safestrap app and uninstall recovery, close app, then uninstall app
and install the new one but for kitkat 4.4 but I'm sure i use to be 4.1.
Click to expand...
Click to collapse
what was the exact name of the .apk?
sd_shadow said:
Power off, Hold volume buttons (or M key/droid 4), Power on, release buttons at
Boot Mode Selection Menu> Scroll down with volume down button, to BP Tools, Select with Volume UP button, should boot directly to SafeStrap (if it's still there).
Sent from my XT912 using Tapatalk
---------- Post added at 06:27 PM ---------- Previous post was at 06:22 PM ----------
you need safestrap 3.75 for CM12/lollipop/android 5.0 roms
you need to open old safestrap app and uninstall recovery, close app, then uninstall app
what was the exact name of the .apk?
Click to expand...
Click to collapse
Safestrap-I545-3.75-KitKat-A03.apk
ynotbu said:
Safestrap-I545-3.75-KitKat-A03.apk
Click to expand...
Click to collapse
@stargo has released a updated safestrap (v3.75 - Jan 2015)
Cm12 requires safestrap v3.75 (or newer)
Safestrap-XXXXX-v3.75.apk (31-Jan-2015 )
if you installed the debugged version likely do not need to upgrade, but if you have 3.74 or lower use Safestrap-XXXXXX-v3.75.apk (or newer)
follow the readme.txt instructions on the download site
Download the version for your device
Droid 4 = maserati, Droid Razr = spyder...
[Video] How to install Android 5.0.2 Lollipop on the Motorola Droid Bionic, Droid 4 and Droid Razr http://www.youtube.com/watch?v=2yMYUXV8FmI
Sent from my XT912 using Tapatalk
---------- Post added at 07:08 PM ---------- Previous post was at 07:05 PM ----------
use Safestrap-umts_spyder-v3.75.apk
---------- Post added at 07:12 PM ---------- Previous post was at 07:08 PM ----------
Safestrap-I545-3.75-KitKat-A03.apk is for the Samsung Galaxy S4
---------- Post added at 07:27 PM ---------- Previous post was at 07:12 PM ----------
I started the index, to avoid this kind of error
http://forum.xda-developers.com/showthread.php?t=3023837
[INDEX] Motorola Droid Razr Development (2015)
Sent from my XT912 using Tapatalk
So other than uninstalling the recovery through the old app, then deleting it then installing the newer 3.75 apk app, is there anything else someone should be mindful of?
I'm about to upgrade my safestrap from 3.73 to 3.75 myself on my XT912... Backing up everything while I read and reply...
Zymz said:
So other than uninstalling the recovery through the old app, then deleting it then installing the newer 3.75 apk app, is there anything else someone should be mindful of?
I'm about to upgrade my safestrap from 3.73 to 3.75 myself on my XT912... Backing up everything while I read and reply...
Click to expand...
Click to collapse
Download the correct version, make sure it is correct size, follow the readme.txt instructions.
Sent from my XT912 using Tapatalk
Success, it went smoothly, thank you.
Related
I am trying to uninstall safestrap 3.11, but when I go to settings/apps, safestrap is not listed. I am not able to open safestrap from the device. How can I uninstall it so the boot screen no longer asks me if I want to enter into recovery mode? Please help!
-xxPerrin
I think you need to reboot into the stock rom (since that is where safe strap was originally installed), then start safestrap and select the uninstall option, and you may also need to then check apps to make sure it is completely uninstalled. If not you can finish the uninstall from there.
Sent from my XT912 using Tapatalk
I am in the stock ROM. Uggh!
Sent from my DROID RAZR using Tapatalk
You could use the Droid RAZR Utility (see http://forum.xda-developers.com/showthread.php?t=2192467 ) to restore your phone back to stock. Use the wipe option. At that point you should be back to a completely stock RAZR.
Sent from my XT912 using Tapatalk
Were you able to get safesatrp 3.11 uninstalled yet? Did you install recovery on stock ROM or a custom Rom?
---------- Post added at 08:45 PM ---------- Previous post was at 08:39 PM ----------
If you did install recovery on stock ROM and do not want to flash with Razr Utilty, you can try to reinstall recovery on stock to retry and remove it again. Something might have gone bad somewhere along your flashings and caused a mix up in files.
Good call! The reinstall worked! Thanks.
Sent from my DROID RAZR using Tapatalk
i keep getting a continuous error message stating , Unfortunately, Nfc service has stopped. this started after i tried installing the wallet workaround.
my galaxy is on version 4.3 vruemk2, any help would be appreciated.
Wresrex said:
i keep getting a continuous error message stating , Unfortunately, Nfc service has stopped. this started after i tried installing the wallet workaround.
my galaxy is on version 4.3 vruemk2, any help would be appreciated.
Click to expand...
Click to collapse
There are no working wallet workarounds for the factory stock MK2 ROM that I am aware of.
However, if you'll let us know what workaround you tried to use we may be able to help recover.
I had the same issue.
Vzw s4 mk2 safestrap hyperdrive rls12. I had to recreate slot 1. Haven't tried the update again.
Sent from my XT1060 using xda app-developers app
---------- Post added at 10:13 PM ---------- Previous post was at 09:46 PM ----------
http://forum.xda-developers.com/showthread.php?t=2540196
This is the Google Wallet NFC fix ( tap to pay functionality ) method that I tried unsuccessfully. I used kies to reinstall mk2. Rooted, installed safestrap, installed hyperdrive RLS 12. Setup HD12 as active in ss and setup the ROM letting the phone sit 10+ minutes before reboot after configuration as described in the original post. Next up, booted into recovery, installed the NFC zip, fixed permissions and rebooted the phone. Instant NFC force close on startup... Over and over. factory reset and reinstall of the ROM didn't fix the problem, I had to recreate slot1 in ss.
The above steps happened after the same NFC force close issue occurred after trying this same fix on my original rooted, safestrapped mk2 operating system. Hence the reason Kies was used to factory restore the device in the first place. So basically I tried twice and was unsuccessful both times.
The zip file from the original post was removed and the thread was locked before I could post this information. I had to reset my phone twice but wasn't upset because the author never stated that the hack would specifically work on the mk2 bootloader with safestrap.
I hope that helps. If anyone can point me in the right direction to get Google Wallet tap to pay working on the vzw s4 mk2 bootloader , please do let me know by responding to this post.
Sent from my XT1060 using xda app-developers app
bqw371 said:
I had the same issue.
Vzw s4 mk2 safestrap hyperdrive rls12. I had to recreate slot 1. Haven't tried the update again.
Sent from my XT1060 using xda app-developers app
---------- Post added at 10:13 PM ---------- Previous post was at 09:46 PM ----------
http://forum.xda-developers.com/showthread.php?t=2540196
This is the Google Wallet NFC fix ( tap to pay functionality ) method that I tried unsuccessfully. I used kies to reinstall mk2. Rooted, installed safestrap, installed hyperdrive RLS 12. Setup HD12 as active in ss and setup the ROM letting the phone sit 10+ minutes before reboot after configuration as described in the original post. Next up, booted into recovery, installed the NFC zip, fixed permissions and rebooted the phone. Instant NFC force close on startup... Over and over. factory reset and reinstall of the ROM didn't fix the problem, I had to recreate slot1 in ss.
The above steps happened after the same NFC force close issue occurred after trying this same fix on my original rooted, safestrapped mk2 operating system. Hence the reason Kies was used to factory restore the device in the first place. So basically I tried twice and was unsuccessful both times.
The zip file from the original post was removed and the thread was locked before I could post this information. I had to reset my phone twice but wasn't upset because the author never stated that the hack would specifically work on the mk2 bootloader with safestrap.
I hope that helps. If anyone can point me in the right direction to get Google Wallet tap to pay working on the vzw s4 mk2 bootloader , please do let me know by responding to this post.
Sent from my XT1060 using xda app-developers app
Click to expand...
Click to collapse
Every time I tried to point out to the author of that "fix" that it didn't work he got upset. However, it's been reported by some that they got it to work on Hyperdrive. I wasn't ever able to get it to work, and it always killed wifi. I'd suggest not using it on an i545.
https://www.dropbox.com/s/bm6r5nnah3hjz0u/dbSGS4_GE43_R141Wallet.zip
Here is the fix your looking for.
Before you flash this:
Remove any remnants of google wallet from your phone. That includes uninstalling the apk and removing its data from /data/data.
1. Flash in safestrap recovery
2. Fix permissions.
3. Reboot
4. Enjoy tap and pay
Sent from my SCH-I545 using xda app-developers app
---------- Post added at 09:59 AM ---------- Previous post was at 09:40 AM ----------
The fix i posted above works flawless on my vzv sgs4 mk2 stock rom.
Sent from my SCH-I545 using xda app-developers app
---------- Post added at 10:11 AM ---------- Previous post was at 09:59 AM ----------
If this NFC fix kills your wifi as it has mine you must edit the following line in your build.prop to read "false"
Ro.securestorage.support=false
Sent from my SCH-I545 using xda app-developers app
Q&A for [RECOVERY XT910] Safestrap Recovery v3.7x [05/15/2014 V3.73 - TWRP 2.7.0.0]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY XT910] Safestrap Recovery v3.7x [05/15/2014 V3.73 - TWRP 2.7.0.0]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Safestrap 3.7x for XT910
Hi,
Does anyone have links to download safestrap apk 3.7x for XT910?
The ones provided in the thread http://forum.xda-developers.com/showthread.php?t=2427125 are not working anymore.
Thanks
I had seen a lot of issues for users who have stock ICS ROM, and try to install safestrap 3.73 to later install cyanogenMod on another ROM slot. Though I too had the same issue, I could track this to a problem with safestrap3.73. Instead using safestrap3.65 will solve the issue. The battery will charge even if the phone is off and also it is possible to boot into the stock ROM
Hi,
Is it possible to keep the safestrap available after formatting /system partition on stock slot? My safestrap always gone after flashing a new rom when doing a clean install.
Thanks
Where does Safestrap installs itself? Which partition?
Sent from XT910 running AOSPAL
[Q] Bionic with os backup in twrp folder with os wiped HELP
Please if anyone can help.
I was having a lot of issues with the phone and decided to go back to stock and when i wiped I must have not selected the stock rom lot and when it rebooted (no os).
A total bonehead move.
I do have the backup of the stock os in the twrp folder in sd card however I can't install from android recovery.
Is there some thing I can do the make this file install??
Please if any one can help it would be greatly appreciated .
raidermc said:
Please if anyone can help.
I was having a lot of issues with the phone and decided to go back to stock and when i wiped I must have not selected the stock rom lot and when it rebooted (no os).
A total bonehead move.
I do have the backup of the stock os in the twrp folder in sd card however I can't install from android recovery.
Is there some thing I can do the make this file install??
Please if any one can help it would be greatly appreciated .
Click to expand...
Click to collapse
If you have XT910 then the only way to get back to stock is to flash Sbf file for your region with Rsd lite.
If you have XT912 you must use Matlgroff's Utility.
Sent from my Razr XT910
Thanxs for getting back to me.
I have the xt875 Bionic.
I can get into recovery but can't use the backup file to reinstall the os .
Is there a utility for the Bionic?
Thanxs
welder73 said:
If you have XT910 then the only way to get back to stock is to flash Sbf file for your region with Rsd lite.
If you have XT912 you must use Matlgroff's Utility.
Sent from my Razr XT910
Click to expand...
Click to collapse
raidermc said:
Thanxs for getting back to me.
I have the xt875 Bionic.
I can get into recovery but can't use the backup file to reinstall the os .
Is there a utility for the Bionic?
Thanxs
Click to expand...
Click to collapse
Android recovery can not restore backups from a custom recovery.
Android recovery is stock motorola recovery and can only install official updates (if correct stock rom is already installed ), wipe cache, and wipe data/factory reset.
and this is a Droid razr thread, see bionic forums
not seeing a Bionic utility
using on verizon or other carrier?
---------- Post added at 01:39 PM ---------- Previous post was at 01:36 PM ----------
Power off, Hold volume buttons, Power on, release buttons at
Boot Mode Selection Menu> Scroll down with volume down button, to BP Tools, Select with Volume UP button, should boot directly to SafeStrap
I have the most recent Safestrap on my phone, SS 3.75 on Razr maxx, but was wondering if this version can be used on other phones. A friend has a Samsung Stratosphere 2 that is having issues, much like my phone was. I was going to root it and use the magic of root to make it run better, so it lasts till she gets a new one. Everything I've read talks about flashing CWM, I'm more familiar with Safestrap. I did see in one post, #321 of this thread, that someone modified Hashcode's safestrap. But they use this to launch CWM. They say they can't launch Safestrap. I've read through a lot of that thread, seems to be the only one about rooting that phone, and get lost in the tech talk of things. I may have to get info from my friends phone and post to that thread.
Any advise is appreciated.
Thanks
dtiger1138 said:
I have the most recent Safestrap on my phone, SS 3.75 on Razr maxx, but was wondering if this version can be used on other phones. A friend has a Samsung Stratosphere 2 that is having issues, much like my phone was. I was going to root it and use the magic of root to make it run better, so it lasts till she gets a new one. Everything I've read talks about flashing CWM, I'm more familiar with Safestrap. I did see in one post, #321 of this thread, that someone modified Hashcode's safestrap. But they use this to launch CWM. They say they can't launch Safestrap. I've read through a lot of that thread, seems to be the only one about rooting that phone, and get lost in the tech talk of things. I may have to get info from my friends phone and post to that thread.
Any advise is appreciated.
Thanks
Click to expand...
Click to collapse
safestrap and any custom Recovery must be built for the device you are going to use it on.
I believe source files are posted on download site.
Sent from my XT907 using Tapatalk
sd_shadow said:
safestrap and any custom Recovery must be built for the device you are going to use it on.
I believe source files are posted on download site.
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
I was afraid of that. I"ll have to look into it more. Also I realized I'm running Safestrap 3.74, installed it before the update on the 31st. Will the new one install over the old one, or do I have to uninstall 3.74 to install 3.75? That is when and if I find the need to do that.
Thanks @sd_shadow
dtiger1138 said:
I was afraid of that. I"ll have to look into it more. Also I realized I'm running Safestrap 3.74, installed it before the update on the 31st. Will the new one install over the old one, or do I have to uninstall 3.74 to install 3.75? That is when and if I find the need to do that.
Thanks @sd_shadow
Click to expand...
Click to collapse
read the readme.txt instructions
pretty safe that safestrap roms will not be lost.
Sent from my XT907 using Tapatalk
---------- Post added at 08:49 PM ---------- Previous post was at 08:48 PM ----------
@Stargo has released a updated safestrap (v3.75 - Jan 2015)
Cm12 requires safestrap v3.75 (or newer)
Safestrap-XXXXX-v3.75.apk (31-Jan-2015 )
if you installed the debugged version likely do not need to upgrade, but if you have 3.74 or lower use Safestrap-XXXXXX-v3.75.apk (or newer)
follow the readme.txt instructions on the download site
Download the version for your device
Droid 4 = maserati, Droid Razr = spyder...
Sent from my XT907 using Tapatalk
Is it Brick?
I have a XT910 rooted ICS 4.0.4 and install Safestrap for custom ROM. But when wanted to do partition, only found 780MB so accidentally wipe all data without backup original stock ROM. I am now stuck and "Android Systen recovery <3e>" without any stock ROM and try update other ROM with E: signature not verified error. How to get out of this?
Btw, unable to go into AP Fastboot by pressing Vol up + dwn + Pwr! Always got into Android System Recovery <3e>..
Thanks for any advice or direct to thread to solve this issue.
kn2i said:
I have a XT910 rooted ICS 4.0.4 and install Safestrap for custom ROM. But when wanted to do partition, only found 780MB so accidentally wipe all data without backup original stock ROM. I am now stuck and "Android Systen recovery <3e>" without any stock ROM and try update other ROM with E: signature not verified error. How to get out of this?
Btw, unable to go into AP Fastboot by pressing Vol up + dwn + Pwr! Always got into Android System Recovery <3e>..
Thanks for any advice or direct to thread to solve this issue.
Click to expand...
Click to collapse
You can not install anything in android recovery
To boot to fastboot mode
Power off, Hold volume down, power on
You need to flash stock firmware with RSD Lite.
Sent from my XT907 using Tapatalk
hermansyah19 said:
Hi,
Is it possible to keep the safestrap available after formatting /system partition on stock slot? My safestrap always gone after flashing a new rom when doing a clean install.
Thanks
Click to expand...
Click to collapse
PM please...
give me tutorial rooting xt910 JB
aji.trav said:
PM please...
give me tutorial rooting xt910 JB
Click to expand...
Click to collapse
Root easily with SafeRoot, link in the index
http://forum.xda-developers.com/showthread.php?t=3023837
[INDEX] Motorola Droid Razr Development (2015)
Sent from my XT907 using Tapatalk
sd_shadow said:
Root easily with SafeRoot, link in the index
http://forum.xda-developers.com/showthread.php?t=3023837
[INDEX] Motorola Droid Razr Development (2015)
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
ok, thanks, my device rooted now,
---------- Post added at 10:47 AM ---------- Previous post was at 10:21 AM ----------
where i can download? link please....
aji.trav said:
ok, thanks, my device rooted now,
---------- Post added at 10:47 AM ---------- Previous post was at 10:21 AM ----------
where i can download? link please....
Click to expand...
Click to collapse
@stargo has released a updated safestrap (v3.75 - Jan 2015)
Cm12 requires safestrap v3.75 (or newer)
Safestrap-XXXXX-v3.75.apk (31-Jan-2015 )
follow the readme.txt instructions on the download site
Download the version for your device
Droid 4 = maserati, Razr XT912 = spyder, Razr XT910 = umts_spyder, Bionic = targa
[Video] How to install Safestrap 3.75 and Android 5.0.2 Lollipop on the Motorola Droid Bionic, Droid 4 and Droid Razr http://www.youtube.com/watch?v=2yMYUXV8FmI
if you have a XT912 or XT894, There is a Modified Safestrap 3.75 for unused partitions (/preinstall & /webtop) by Mentor.37
XT894: http://forum.xda-developers.com/droid-4/development/wip-safestrap-3-75-unused-partitions-t3023932
XT912: http://forum.xda-developers.com/droid-razr/development/recovery-safestrap-3-75-unused-t3032675
Note: Mentor.37 has removed the Safestrap splash screen, so you must select reboot to recovery from rom or Boot to safestrap from Stock Boot Mode Selection Menu
Sent from my XT907 using Tapatalk
sd_shadow said:
@stargo has released a updated safestrap (v3.75 - Jan 2015)
Cm12 requires safestrap v3.75 (or newer)
Safestrap-XXXXX-v3.75.apk (31-Jan-2015 )
follow the readme.txt instructions on the download site
Download the version for your device
Droid 4 = maserati, Razr XT912 = spyder, Razr XT910 = umts_spyder, Bionic = targa
[Video] How to install Safestrap 3.75 and Android 5.0.2 Lollipop on the Motorola Droid Bionic, Droid 4 and Droid Razr http://www.youtube.com/watch?v=2yMYUXV8FmI
if you have a XT912 or XT894, There is a Modified Safestrap 3.75 for unused partitions (/preinstall & /webtop) by Mentor.37
XT894: http://forum.xda-developers.com/droid-4/development/wip-safestrap-3-75-unused-partitions-t3023932
XT912: http://forum.xda-developers.com/droid-razr/development/recovery-safestrap-3-75-unused-t3032675
Note: Mentor.37 has removed the Safestrap splash screen, so you must select reboot to recovery from rom or Boot to safestrap from Stock Boot Mode Selection Menu
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
thanks bro :good:
I had just recovered from a RDS lite flash and installed ss 3.73 on android 4.0.4 and was booting fine. I used ss recovery to do a system+webtop+(one more) backup. After that I could no longer boot to stock ROM. I then wiped dalvik but that didn't help. Is there any other way then RDS lite to disable ss?
Sent from my HTC One using XDA Free mobile app
micnolmad said:
I had just recovered from a RDS lite flash and installed ss 3.73 on android 4.0.4 and was booting fine. I used as recovery to do a system+webtop+(one more) backup. After that I could no longer boot to stock ROM. I then wiped dalvik but that didn't help. Is there any other then RDS lite to disable ss?
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
No way to disable Safestrap and still boot stock, unless device is already in stock.
Suspect that if stock will not boot, it is no longer bootable, did you try restoring stock backup in safestrap?
That's what it's for.
or you could try my 6.16.207.XT908.LRA.en.US stock backup should work fine on the XT912, just doesn't have the Verizon bloatware
---------- Post added at 03:39 PM ---------- Previous post was at 03:37 PM ----------
Forgot that you wrote that it's on 4.0.4, my backup may not work.
sd_shadow said:
No way to disable Safestrap and still boot stock, unless device is already in stock.
Suspect that if stock will not boot, it is no longer bootable, did you try restoring stock backup in safestrap?
That's what it's for.
or you could try my 6.16.207.XT908.LRA.en.US stock backup should work fine on the XT912, just doesn't have the Verizon bloatware
---------- Post added at 03:39 PM ---------- Previous post was at 03:37 PM ----------
Forgot that you wrote that it's on 4.0.4, my backup may not work.
Click to expand...
Click to collapse
If you mean if I activated stock slot, then yes. I can't remember if I tried to restore my backup or not. I ended up just flashing with rds again. Of cause I had to do the setup all over again but it worked fine. I would just have hoped ss had a back-out option.
@sd_shadow, I rooted my droid razr T912 using the iRoot method. I have bootstrap 3.72 installed and I had made a back up of the image prior to installing CM 11. I'm running into errors installing anything on my razr now. I tried to go back to my old image copy but I erased system along with dalvic, data so now it won't boot up. I still have access to bootstrap, can you help me please? Do I need to restore the factory image or since I have bootstrap is there a way to get a new image on without the system files?
villian1998 said:
@sd_shadow, I rooted my droid razr T912 using the iRoot method. I have bootstrap 3.72 installed and I had made a back up of the image prior to installing CM 11. I'm running into errors installing anything on my razr now. I tried to go back to my old image copy but I erased system along with dalvic, data so now it won't boot up. I still have access to bootstrap, can you help me please? Do I need to restore the factory image or since I have bootstrap is there a way to get a new image on without the system files?
Click to expand...
Click to collapse
All Questions are to be posted to Q & A forum, I have requested that this thread be moved to Q&A.
---------- Post added at 12:23 PM ---------- Previous post was at 12:21 PM ----------
Which model number is on back cover of phone?
What are the full file names used? safestrap? rom? gapps?...
sd_shadow said:
All Questions are to be posted to Q & A forum, I have requested that this thread be moved to Q&A.
---------- Post added at 12:23 PM ---------- Previous post was at 12:21 PM ----------
Which model number is on back cover of phone? XT912
What are the full file names used? safestrap? rom? gapps?...
Click to expand...
Click to collapse
I used Rootmaster.apk to root the phone. I used stargo's 3.75 Safestrap 31-Jan-2015 for the recovery.
I used cm-12.1-20150519-NIGHTLY-spyder.zip and
gapps-lp-20150314.zip
but like I said these fail, which is fine but I can't get my old image back because it fails at the system install. I think it's because I initially wiped system?
In op you wrote that you used 3.72?
Sent from my XT907 using Tapatalk
Sorry
sd_shadow said:
In op you wrote that you used 3.72?
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
I'm literally doing this while go in/out of meetings today. I think I need to re-root the phone again?
villian1998 said:
I'm literally doing this while go in/out of meetings today. I think I need to re-root the phone again?
Click to expand...
Click to collapse
If you can boot to twrp recovery, root doesn't matter
Sent from my XT907 using Tapatalk
---------- Post added at 02:09 PM ---------- Previous post was at 02:05 PM ----------
What files do you have on device now?
Sent from my XT907 using Tapatalk
sd_shadow said:
If you can boot to twrp recovery, root doesn't matter
Sent from my XT907 using Tapatalk
---------- Post added at 02:09 PM ---------- Previous post was at 02:05 PM ----------
What files do you have on device now?
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
An update, I tried to re-install the old backup but without system, in which it didn't do anything but eventually came up to the bootstrap screen. It stated that I didn't have su and If I wanted to install the SU binaries. I clicked yes thinking that would get it to work and now I can't get the bootstrap screen, but I can only get to the bootloader now. It seems like I will need to revert back to the old firmware correct? In the AP Fastboot Flash Mode it says the device is locked btw.
villian1998 said:
An update, I tried to re-install the old backup but without system, in which it didn't do anything but eventually came up to the bootstrap screen. It stated that I didn't have su and If I wanted to install the SU binaries.
Click to expand...
Click to collapse
TWRP is used with many devices. With some devices twrp can be flashed before rooting, and then you can root with TWRP, the XT912 is not one of those devices.
When you get not rooted warning in twrp, that almost always means Rom is not bootable or completely missing.
Do not reboot if you get that warning.
It seems like I will need to revert back to the old firmware correct?
Click to expand...
Click to collapse
Yes now you need to flash stock firmware with RSD Lite.
Sent from my XT907 using Tapatalk
---------- Post added at 02:33 PM ---------- Previous post was at 02:29 PM ----------
villian1998 said:
In the AP Fastboot Flash Mode it says the device is locked btw.
Click to expand...
Click to collapse
the XT912 bootloader is not unlockable.
---------- Post added at 02:34 PM ---------- Previous post was at 02:33 PM ----------
villian1998 said:
An update, I tried to re-install the old backup but without system,
Click to expand...
Click to collapse
The twrp nandroid backup includes system and user partitions, if done correctly.
Ok, I'm in the process of using RSD lite
sd_shadow said:
TWRP is used with many devices. With some devices twrp can be flashed before rooting, and then you can root with TWRP, the XT912 is not one of those devices.
When you get not rooted warning in twrp, that almost always means Rom is not bootable or completely missing.
Do not reboot if you get that warning.
Yes now you need to flash stock firmware with RSD Lite.
Sent from my XT907 using Tapatalk
---------- Post added at 02:33 PM ---------- Previous post was at 02:29 PM ----------
the XT912 bootloader is not unlockable.
---------- Post added at 02:34 PM ---------- Previous post was at 02:33 PM ----------
The twrp nandroid backup includes system and user partitions, if done correctly.
Click to expand...
Click to collapse
But the link to get to the recovery firmware for the Razr xt912 doesn't work, do you have another mirror?
villian1998 said:
But the link to get to the recovery firmware for the Razr xt912 doesn't work, do you have another mirror?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=58684545&postcount=2
You sir are a life saver!!
sd_shadow said:
http://forum.xda-developers.com/showpost.php?p=58684545&postcount=2
Click to expand...
Click to collapse
I'm sure I can get it back to normal now.
Thank you so very much
Alright, I'm back again. But this an interesting development. Let me describe the whole process.
I originally rooted using the Saferoot - [Video]Safe Root for Jelly Bean Android Devices like the Droid Bionic 4.1.2 & More @Tomsgt to root again. It worked like a charm. I updated the SU binaries from the updated SU app and placed SU in my system. My next step was to install safestrap 3.75 which I had the apk still on my internal memory and was able to install it successfully. I booted to the recovery and made a back up(which I'm curious to know if it actually worked this time, but I haven't flashed back to yet) which worked flawlessly. Now this time I wiped with just doing a simple dalvik cache wipe and installed CM12 per the directions and Gapps in this thread Official CM12 thread - Official Downloads (XT912). Everything appears to be fine but I noticed that I didn't have SU, I checked to see if the phone was rooted, which the jRummy root checker says no root. I've tried flashing a SU zip from this post Quote:
Originally Posted by andreimoto
i found my razr in cm12 not root...
maybe this is silly question.... then how to make it root?
thanks dude...
https://download.chainfire.eu/396/Su...etrieve_file=1 just flash superSU in ss recovery to gain root access.
So I can't seem to get root access which is bothering me, but not a deal breaker. I've also noticed that when I try to connect to the computer, my computer can't connect to the phone for some reason. So I'm curious to know how I can get root access again? Should I try saferoot again? I hope this is makes sense.....
villian1998 said:
Alright, I'm back again. But this an interesting development. Let me describe the whole process.
I originally rooted using the Saferoot - [Video]Safe Root for Jelly Bean Android Devices like the Droid Bionic 4.1.2 & More @Tomsgt to root again. It worked like a charm. I updated the SU binaries from the updated SU app and placed SU in my system. My next step was to install safestrap 3.75 which I had the apk still on my internal memory and was able to install it successfully. I booted to the recovery and made a back up(which I'm curious to know if it actually worked this time, but I haven't flashed back to yet) which worked flawlessly. Now this time I wiped with just doing a simple dalvik cache wipe and installed CM12 per the directions and Gapps in this thread Official CM12 thread - Official Downloads (XT912). Everything appears to be fine but I noticed that I didn't have SU, I checked to see if the phone was rooted, which the jRummy root checker says no root. I've tried flashing a SU zip from this post Quote:
Originally Posted by andreimoto
i found my razr in cm12 not root...
maybe this is silly question.... then how to make it root?
thanks dude...
https://download.chainfire.eu/396/Su...etrieve_file=1 just flash superSU in ss recovery to gain root access.
So I can't seem to get root access which is bothering me, but not a deal breaker. I've also noticed that when I try to connect to the computer, my computer can't connect to the phone for some reason. So I'm curious to know how I can get root access again? Should I try saferoot again? I hope this is makes sense.....
Click to expand...
Click to collapse
every rom has a separate superuser/binary, root access for stock has nothing to do with a custom rom.
if you can boot to twrp recovery, stock slot should be rooted.
rom slot you are installing cm12 in?
full file names?
verified md5s?
---------- Post added at 04:51 PM ---------- Previous post was at 04:50 PM ----------
How did you move SuperSu to system?
sd_shadow said:
every rom has a separate superuser/binary, root access for stock has nothing to do with a custom rom.
if you can boot to twrp recovery, stock slot should be rooted.
rom slot you are installing cm12 in?
full file names?
verified md5s?
Yes I can boot to twrp recovery.
I installed to internal slot
cm-12.1-20150528-NIGHTLY-spyder.zip
md5sum: e230e1b71b7158c6d89a961e9c6c6087
For GApps, I used these: https://s.basketbuild.com/gapps
Tried this zip for SU https://download.chainfire.eu/396/Su...etrieve_file=1 just flash superSU in ss recovery to gain root access.
Yes verified all MD5s.
Click to expand...
Click to collapse
villian1998 said:
I installed to internal slot
.
Click to expand...
Click to collapse
? slot options are 1 , 2, 3, 4 and stock.
If you installed Mentor.37's you also have a safe slot
Sorry, I'm new to the razr
sd_shadow said:
? slot options are 1 , 2, 3, 4 and stock.
If you installed Mentor.37's you also have a safe slot
Click to expand...
Click to collapse
I've googled and searched on xda about slots for the xt912, but I'm merely confused. So to answer your question I don't really know, but I'll keep searching....
villian1998 said:
I've googled and searched on xda about slots for the xt912, but I'm merely confused. So to answer your question I don't really know, but I'll keep searching....
Click to expand...
Click to collapse
You don't need to search, it says in twrp which slot is selected.
see my [Video] Installing/Upgrading Safestrap 3.75 and Installing a Lollypop Rom
or Tomsgt's [Video]How to install Safestrap 3.75 and Android 5.0.2 Lollipop on the Motorola Droid Bionic, Droid 4 and Droid Razr
Ah, thanks for the clarification
sd_shadow said:
You don't need to search, it says in twrp which slot is selected.
see my [Video] Installing/Upgrading Safestrap 3.75 and Installing a Lollypop Rom
or Tomsgt's [Video]How to install Safestrap 3.75 and Android 5.0.2 Lollipop on the Motorola Droid Bionic, Droid 4 and Droid Razr
Click to expand...
Click to collapse
It's intalled on the stock slot
villian1998 said:
It's intalled on the stock slot
Click to expand...
Click to collapse
try installing on a rom slot