Hi, I've got dead lg, when i plug to the PC without battery , phone connect and disconnecting . No response for any keys ON/OFF VOL+/- and other.
already try:
-install driver for OMAP 4430
-replaced battery
-LGMobile Support Tool don't see it
Please help
Related
LGP698
OS and firmware: windows 7, V10C
Problem Description:
likely zaglyuchil USB controller in your phone, it somehow can be treated at home or just CC?
symptoms:
1. always thinks that charging
2. can not connect to PC via USB. Occurs konekt, search for the driver and immediately turns off (the device is removed)
3. after a reboot - Emergency Mode, the system will not boot. Treated only by pulling the battery for 5 minutes.
Everything else works OK!
Firmware: V10C
Body: LG P698
Comp: Win7, 32
PS: in Emergency Mode and put the wood body picks up!
Fresh infa:
- Charging up to 100% lost Note that the body is charged and successfully discharge to 0 and switched off
- Turn on the charger - Emergency Mode
- For the sake of vtyknul in the complex - all the wood and picked up the set!
up. please help
Hei !
Have you root in your phone?
If not, I guess better give it to service. Can't make sure what's wrong.
from Ad!MoBiLe:: LGP698 Optimus Net Dual
Hi,
I had problem with my LG L9, screen totally blank. when connecting to usb OMAP4430 is detected, i already installed the driver do what Lelus said using Fastboot but when I choose option 3 for P765 there is an error message "Failed: Remote partition doesn't exist".
And i am try to do this step http://forum.xda-developers.com/showthread.php?t=2546571 try to flash using LG software tools but after 30% phone is disconnected. phone always disconnected after +/- 2 minute.
Please help me to solve my problem.
Thanks,
Hello
I have a phone ZOPO C2 VER B. Phone turned off and do not ever want to turn on. It stopped responding to the charger, do not give any sign of life.
When connected to computer detects the phone, installs the drivers, the SP FLASH TOOL it detects. I pulled a few ROMs and I can not upload any ROM. It is always like this: It comes to 100% red belt and that's it. No error. The phone is detected as the MTK PORT, sometimes after reaching the 100% change in VCOM MediaTek USB DA. Here I give a link to the video where you can see how it looks. https://www.youtube.com/watch?v=6Iospu3n0oU&feature=youtu.be
I tried to upload separately preloader, recovery boot. Always the same ending. I tried with the battery in the phone, without the battery, hold Vloume - + Power, etc. Nothing gives all the time is the same.
Use three other PC to try. I have one more phone Zopo and on the same computer and the same driver is dowload rom with SFP without problems.
Phone is brick or can fix this?
Sorry for my english is bad
I am having the same problem, until now could not solve.
My friend gave me a phone that does not respond to anything, no react for VolumeUP + PowerButton without battery, it does not detect the computer* What can I do? Anny ideas? Its finally bricked or what?
My computer try to install ONE driver when i randomly plugged my USB cable to my phone, but not succeeded up
After that what i said about driver, i never be able to see this window with this driver after this one time.
Name of the driver - OMAP4430
Hope you help me with this.
Small wonder, w/o battery.
Unless you want to invoke download mode to flash a stock rom with LGs flash tool. But even that probably requires a battery, despite some people saying the opposite. Download mode: Keep volume pushed while attaching phone via usb. Battery can/must stay in.
hi try reinstall x loader you need install the drivers omap and use mode fastboot... search how to install driver omapp (search here in xda ) and the folder fastboot has a file .bat you run it and show you the option
Hi. My E460 dont turn on and when i hold volume buttons and plug in to USB it display as "MediaTek USB Port (COM5)". What i can do? I did research but found instructions just for L7 II.
Danielski said:
Hi. My E460 dont turn on and when i hold volume buttons and plug in to USB it display as "MediaTek USB Port (COM5)". What i can do? I did research but found instructions just for L7 II.
Click to expand...
Click to collapse
Did you find something? I have a problem similar to LG e455f =/
The driver appears as: MediaTek USB Port (COM11).
Has anyone managed to fix this? Is it safe to assume it is a "bulk" download mode as for the Qualcomm models?