Related
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Gemni69 said:
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Click to expand...
Click to collapse
How about checking the Skinomi thread in this very first page of this section ?
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Good Screen Protector
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
I have the Skinomi. I'm happy with it, but it does not appear to help with glare or screen angles (though, honestly, I only used it for a few minutes before installing the protector).
dj_justice said:
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Click to expand...
Click to collapse
which ones did you get?
-J
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Anyone have recommendations for screen protectors? Looking for helping with anti glare and no finger prints on it. Any info would be great. Thank for all the feedback so far.
Traderny said:
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
Click to expand...
Click to collapse
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
emersonlp said:
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
Click to expand...
Click to collapse
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
sjmoreno said:
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Click to expand...
Click to collapse
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Aurum Screen Protector
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
just my $0.02, but why not use the one by Zagg....?..
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Traderny said:
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
Click to expand...
Click to collapse
Thanks for the info, Traderny. Would you say that the Aurum screen protector allows for smoother gliding movements than the unprotected GTab screen? I'm hoping to find something that provides a nice swipe feel. Too often my fingers would "stick" to the naked screen or (less so, but still) the Skinomi protector.
My .2 cents
Traderny said:
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Click to expand...
Click to collapse
Wet application screen protectors have been around for a while and it has been shown to not be an issue if you follow the directions on installation. There are thousands of people that have used wet installation screen protectors here in the gTab forums that have reported no residual issues with the gTab during/after application.
Also, you don't spray liquid on the gTab, rather you're supposed to spray the liquid on both sides of the screen protector before application and dab up the excess liquid as you work it to the edges with the provided plastic card.
I've used both PET and this style of screen protectors on devices before and I prefer this over the PET as I have found the PET style protectors to be too shiny for my tastes.
Among the most helpful reviews for the PET protector on Amazon there are these comments:
1.) Good product, but a pain to put on. Just the slightest piece of dust will cause an air bubble.
2.) According to the packaging, this item is "Finger print free" and "Bubble free application". I experienced both. I would NEVER purchase this product again or recommend it.
Just goes to show you that people will find something to complain about no matter what the product is.
Protectors Protect
My experience with screen protectors on cell phones is that they are only good to protect the screen from damage. All of them will show fingerprints, smudges, grease and oil. This is esp. true with a touch screen. it's like wearing glasses you got to clean them alot. So save time money and headache by putting a microfiber cloth in the bag with your Gtab.
I went with the Exim anti-glare screen protectors, but did have to wait for shipping from China. I bought a complete skinomi skin set, and promptly botched the wet application of the screen protector, but since I wanted the anti-glare it just meant a week wait for the Chinese Air Mail which I had already ordered.
Overall I like the Exim, it was easy to install without any bubbles, though you might want to trim the corners a bit as its a very tight fit. I ended up cutting them off after applying it because I had the screen on perfectly without a single dust mote making a raised area. I don't mind a poorly cut corner, but do wish I had just done a quick trimming beforehand as I wasn't perfectly centered.
2 for $12.99... Was worth the wait.
Hey Naieve,
does it really help with the anti glare issue? Also does it have any issues with the touch screen interface? Is the screen protector to thick that it doesnt detect your finger movement on the screen? Any help on the finger print issues haha?
It helps some with the glare, definitely diffuses the light, but it looks more like a compromise in between a clear protector and some of the very heavy anti-glare screen protectors I've seen. I like it because of this actually. As to issues with the touch screen, I spent some time googling before buying, and while I forget where I read it the fact is there is no difference while using this protector. Even a light touch still works just fine. I wonder if that is the reason this AG protector diffuses less light, as I have heard of some AG protectors being too thick and screwing up touch. It does still show fingeprints, but its not that bad and is easy to clean. Definitely less noticeable than just the screen itself.
aasoror said:
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
Click to expand...
Click to collapse
I said I would update once my Aurum arrived. Like others have mentioned, there is no cutout for the camera or sensor - I don't know what effect that has nor do I really care. I never use the camera anyway.
The protector itself fits perfectly on the screen - it is so perfect that I had trouble aligning it properly and i would get halfway done installing it and notice it was running off the side of the screen slightly.
It took a few minutes to install because I did want it to be perfect. Now that it is installed I am really happy with it. My fingers slide better across the screen and there are far less fingerprints. I am happy with my purchase.
I'm disappointed with the grainy look of the Moshi iVisor AG and I want to get a Steinheil.
Would this be a good price?
http://item.mobileweb.ebay.com/viewitem?itemId=290624068662&index=17&nav=SEARCH&nid=04730414206
I just saw it on eBay and wondering if someone else will buy it first.
Sent from my SAMSUNG-SGH-I777 using xda premium
I am pretty sure I bought mine from Amazon which saved me a few bucks on shipping. I highly recommend this product. It is clear and pretty smooth. In retrospect, I may get the oleophobic version next.
I got the Oleophobic version the other day. Ordered from Amazon to save on shipping since I'm a Prime member. Absolutely love this protector. You can't even tell that its on the phone unless you look closely at it. Its smooth, clear, no rainbow affect, finger prints hardly show and if they do wipe away with ease. Great protector. One side note, they send you two in the package. Nice surprise...
In my opinion, Steinheil makes the best screen protector on the market. I've been using them for years on all my devices.
jm1280 said:
I got the Oleophobic version the other day. Ordered from Amazon to save on shipping since I'm a Prime member. Absolutely love this protector. You can't even tell that its on the phone unless you look closely at it. Its smooth, clear, no rainbow affect, finger prints hardly show and if they do wipe away with ease. Great protector. One side note, they send you two in the package. Nice surprise...
Click to expand...
Click to collapse
Do you know if the Oleophobic has the same clarity as the Ultra Clear? I dont want to get anything that will cloud the screen.
It's a great screen protector, I bought the Oleophobic version and you cannot tell that it's even there.
Using the Oleophobic.
Noticeably more friction than the stock screen.
Does appear to make finger oils more apparent than stock screen.
Easy to wipe off.
Does cover the Front facing camera and sensor ports.
I highly suspect the protector would affect front camera performance, although I have not checked this.
Cutout for the earpiece only.
Two pieces in the package, with cloth and scraper. No alcohol wipes.
As always, apply in a clean, dust-free environment.
I'd call it above average.
tboooe said:
Do you know if the Oleophobic has the same clarity as the Ultra Clear? I dont want to get anything that will cloud the screen.
Click to expand...
Click to collapse
I am using the Ultra Crystal Clear and I am very happy with it. It did not affect the clarity of the screen before and after installing it. I chose it for the clarity and for the scratch protection.
Unless someone has used or installed both versions on their phone, I think it will hard to judge what is better in terms of clarity. HTH.
Quotes from the SGP web site :
(Sorry I can't still post URL, so if you go to their sgpstore.com site and under cell phone > Samsung SGS2 AT&T)
Ultra Crystal and Ultra Oleophobic screen protectors are both clear type where it absolutely doesn't affect the screen image quality.
Ultra Crystal has glass-like surface coating with the best resistance against scratches.
Ultra Oleophobic has an oil resistant coating to resist oil and other contaminants.
Ultra Crystal : Ultimate Clarity
• Ultra Crystal : 25% Thicker than previous model
• Hard coated for Scratches and Scuffs Proof
• High Quality Optical Enhancement Film
• Ultimate Clarity surface hardness : 4H
Ultra Oleophobic : Oil-Resistance
• Oleophobic coating : Oil-resistance coating
• it protects from staining of oils, cosmetics and other contaminations
• High Quality Optical Enhancement Film
• Good Surface Hardness : 3H
---------- Post added 1st November 2011 at 12:10 AM ---------- Previous post was 31st October 2011 at 11:58 PM ----------
xAnimal5 said:
I'm disappointed with the grainy look of the Moshi iVisor AG and I want to get a Steinheil.
Click to expand...
Click to collapse
I agree with you on the grainy aspect of the Moshi iVisor screen protector.
I was almost going to purchase it at the AT&T store when two of the AT&T sales guys showed me their Infuse phones one with the iVisor installed and one without. And that's when I decided to go with Steinheil instead. The iVisor on that phone made his screen so matte or so grainy.
Obviously the iVisor has other advantages (scratch resistant, reusable) but not the clarity one for me.
I'm looking to get a screen protector for my galaxy s2 as well. i've heard a lot of horror stories with screen protectors and leaving residue/ruining the screen so I'm a little hesitant in choosing one.
I know this phone has gorilla glass but it never hurt to protect it.
Is the ultra oleophobic worth the 13.99? Can someone confirm the front-facing camera quality since the protector covers it?
Or should i settle for those $1-3 ones on ebay?
just-another said:
I'm looking to get a screen protector for my galaxy s2 as well. i've heard a lot of horror stories with screen protectors and leaving residue/ruining the screen so I'm a little hesitant in choosing one.
I know this phone has gorilla glass but it never hurt to protect it.
Is the ultra oleophobic worth the 13.99? Can someone confirm the front-facing camera quality since the protector covers it?
Or should i settle for those $1-3 ones on ebay?
Click to expand...
Click to collapse
I just got my olephobic, it's well worth the $14. Front facing cam is not affected by it, picture quality is beautiful. It blocks oils, so you can easily wipe them off, for that fresh feeling.
Sent from my SAMSUNG-SGH-I777 using xda premium
I really like sgp ... the only complaint if.I had to find one is that they seem to carry some charge that attracts.lint/dust... never had problems with dust when pulling my phone out of my pocket on the stock screen... but after installing the protector, it always comes out with a fair amount of dust ...
Again, I still really like it.... great clarity...
joewoo said:
I really like sgp ... the only complaint if.I had to find one is that they seem to carry some charge that attracts.lint/dust... never had problems with dust when pulling my phone out of my pocket on the stock screen... but after installing the protector, it always comes out with a fair amount of dust ...
Again, I still really like it.... great clarity...
Click to expand...
Click to collapse
Same here, the screen protector is so smooth that it's like a lint magnet lol.
Sent from my SAMSUNG-SGH-I777 using xda premium
I use sgp screen protectors on all of my devices and i love them. I have tried all of them but the only one that i use and wikll ever use on this device is the ultra crystal because its the only one that doesnt take away from the shininess of this screen. The screen on this phone is by far the best on the market so i want to keep it that way.
Well I guess the comments answer my questions. I'm not too worried about protection, but just want something that will show less fingerprints.
Im planning to get the oleophobic one aswell but I had a question about if I should use this screen protector that came with this gel case I purchased off eBay. the case is nice and all and it came with an ordinary protector, but because I've never applied a screen protector on any phone before - I was wondering should i apply it? I'm very obsessive about the screen on my galaxy s2 and don't know if removing a screen protector incase i dont like it will damage the screen or anything? there is no adhesive or other solution that came with it, its one of those that u just apply it on after removing covers on both sides
just-another said:
Im planning to get the oleophobic one aswell but I had a question about if I should use this screen protector that came with this gel case I purchased off eBay. the case is nice and all and it came with an ordinary protector, but because I've never applied a screen protector on any phone before - I was wondering should i apply it? I'm very obsessive about the screen on my galaxy s2 and don't know if removing a screen protector incase i dont like it will damage the screen or anything? there is no adhesive or other solution that came with it, its one of those that u just apply it on after removing covers on both sides
Click to expand...
Click to collapse
It should be fine, and you should use the one you got with your case for practice before putting on the steinheil one, I wish I did. After using both steinheil protectors, I put on the ebay one perfect, wish it was the other way around, lol.
joewoo said:
I really like sgp ... the only complaint if.I had to find one is that they seem to carry some charge that attracts.lint/dust... never had problems with dust when pulling my phone out of my pocket on the stock screen... but after installing the protector, it always comes out with a fair amount of dust ...
Again, I still really like it.... great clarity...
Click to expand...
Click to collapse
I fill you,,, same here it is a dust magnet.
soldiersinx said:
It should be fine, and you should use the one you got with your case for practice before putting on the steinheil one, I wish I did. After using both steinheil protectors, I put on the ebay one perfect, wish it was the other way around, lol.
Click to expand...
Click to collapse
Will do, and are there any problems when removing them? I don't want to start digging at the edges with my nails or anything or do they come right off easily? I've heard tape is helpful?
just-another said:
Will do, and are there any problems when removing them? I don't want to start digging at the edges with my nails or anything or do they come right off easily? I've heard tape is helpful?
Click to expand...
Click to collapse
Yeah, scotch tape works pretty well, even just to remove a little bit of the edge
steinheil works great for me, most people can't even tell its there. though I did screw up with the first one but they send two so hopefully it takes less tries than that[COLOR="Silver
I am looking to find the most high quality option when it comes to screen protectors for the Ultra.
I have tried the Muvit protector - but it isn't the best quality I've seen - and it got a little scratch in the application process.
I was wondering if anyone has tried the Stealth Extreme R from Armorz without having first taken off the shatter proof film?
Wondering how it fits on the device, how it affects the weight - and generally how high quality the protector actually is and if it is worth the extra $50.
I am not interested in trying to remove the shatter proof film after reading people's experiences.
Not sure if it'll help you, but there are quite a number of "reviews" on it on Youtube.
hassanmahmood said:
I am looking to find the most high quality option when it comes to screen protectors for the Ultra.
I have tried the Muvit protector - but it isn't the best quality I've seen - and it got a little scratch in the application process.
I was wondering if anyone has tried the Stealth Extreme R from Armorz without having first taken off the shatter proof film?
Wondering how it fits on the device, how it affects the weight - and generally how high quality the protector actually is and if it is worth the extra $50.
I am not interested in trying to remove the shatter proof film after reading people's experiences.
Click to expand...
Click to collapse
I have the Armorz Stealth Extreme R tempered glass protector. Its actually pretty good quality. If you have never put on a glass screen protector before, it might be a little tricky. I put mine on without water, and paid the price when trying to reposition it. the bottom corner is lifted from when i tried to pry it up and move it. I did apply a back glass using the water method, and it took longer to get the bubbles completely out, but came out pretty clean.
I did not remove the anti shatter film on either side, and have not seen any loss in touch sensitivity.
one thing i did notice is that, it added a little bit of weight, but also gave the phone better rigidity when used without the case. some people have mentioned the phone twisting in their pocket, and i have yet to experience any twisting whats so ever.
not sure if the price has gone up, but i ordered mine for 39$ on amazon. hope this helps.
ij0rgei said:
I have the Armorz Stealth Extreme R tempered glass protector. Its actually pretty good quality. If you have never put on a glass screen protector before, it might be a little tricky. I put mine on without water, and paid the price when trying to reposition it. the bottom corner is lifted from when i tried to pry it up and move it. I did apply a back glass using the water method, and it took longer to get the bubbles completely out, but came out pretty clean.
I did not remove the anti shatter film on either side, and have not seen any loss in touch sensitivity.
one thing i did notice is that, it added a little bit of weight, but also gave the phone better rigidity when used without the case. some people have mentioned the phone twisting in their pocket, and i have yet to experience any twisting whats so ever.
not sure if the price has gone up, but i ordered mine for 39$ on amazon. hope this helps.
Click to expand...
Click to collapse
Thanks a lot for the insight!
So why do you think doing it dry caused a problem? Is the adhesive very strong? I figured it would just pull right off.
Do you have any bubbles or blemishes on the front?
hassanmahmood said:
Thanks a lot for the insight!
So why do you think doing it dry caused a problem? Is the adhesive very strong? I figured it would just pull right off.
Do you have any bubbles or blemishes on the front?
Click to expand...
Click to collapse
it's a silicone based adhesive. peels off fairly easy but keeps a strong bond. when I pryed the corner up, I pushed part of the adhesive so it clumped up and now won't lay flat. if you spray it down with water, you'll be able to slide it into place with out having to lift.
it looks like a large are in the picture but it really isn't noticeable. the backside went on with water without any issues. sucks that the back glass cost me 13$ and the front cost me 3 times that much only to have that messed up corner. you live and you learn. Lol
Sent from my C6833 using xda app-developers app
I have the glass-M galss screen protector. It's almost $40 with shipping but it's front and back glass. Its very well made, easy to apply and is more fingerprint resistant than the unprotected glass with it's ASF.
cavallino33 said:
I have the glass-M galss screen protector. It's almost $40 with shipping but it's front and back glass. Its very well made, easy to apply and is more fingerprint resistant than the unprotected glass with it's ASF.
Click to expand...
Click to collapse
... Is that crap made out of Gorilla glass? Good god, that's a screen protector. None of this "Clear film" BS where if there's an Airbubble you just ruined a purchase, oh no, this is quite literally just another screen slapped on top.
What does it do to the thickness of the thing? My concern mainly is with cases like Sony's Battery case that kind of only work with just exactly how thick it is.
Not sure if it's really gorilla glass but no scratches so far from things that would scratch plastic protectors. It is pretty thin I can't say for the case but its under 1mm thick.
Does anyone know this?
http://www.ebay.co.uk/itm/2x-Vikuiti-ARMR220-Displayfolie-Schutzfolie-Sony-Xperia-Z-Ultra-/380784800524?pt=DE_Handy_PDA_Displayschutzfolien&hash=item58a88af30c
There is others references from this brand...
Vikuiti DQCM30
Vikuiti ADQC27
Vikuiti DQC160
Vikuiti ARMR220
I'm tempted to buy ...
Not sure if it's been discussed here before but I just applied the most amazing screen protector I've ever use on any phone. It's called ILLumiShield and they sell it on Amazon and eBay for a reasonable price and is absolutely fantastic it's so easy to put on bubble free, feels like glass even over the the crap protector Sony puts on. I highly recommended and no I don't work for them hehe
Sent from my C6833 using Tapatalk
Shook187:
Sound nice. One more question: haven't you feel after applied your scr.prot. like whole screen sometimes respond not as exactly as you wish, have you? With my scr.prot. I sometimes get unwanted behavior... Like two fingers tap even if I use only one... Or tap without reaction... Or tap evean I did not do it, self-tap... It happens once a day, maybe two, but it is very annoing... Without scr.prot. it works perfect. I thing I would follow by your adwice, only need your opinion about that not-funny behaviors. Thx
Tapatalked from C6833
FRM300 said:
Shook187:
Sound nice. One more question: haven't you feel after applied your scr.prot. like whole screen sometimes respond not as exactly as you wish, have you? With my scr.prot. I sometimes get unwanted behavior... Like two fingers tap even if I use only one... Or tap without reaction... Or tap evean I did not do it, self-tap... It happens once a day, maybe two, but it is very annoing... Without scr.prot. it works perfect. I thing I would follow by your adwice, only need your opinion about that not-funny behaviors. Thx
Tapatalked from C6833
Click to expand...
Click to collapse
I found this issue to be greatly improved with the iLLumiShield screen protector. But it was definitely more of an issue with the cheaper screen protectors. You also might want to go to settings/sounds and uncheck vibrate on touch. I feel like this improve my touch sensitivity.
Sent from my C6833 using Tapatalk
shook187 said:
I found this issue to be greatly improved with the iLLumiShield screen protector. But it was definitely more of an issue with the cheaper screen protectors. You also might want to go to settings/sounds and uncheck vibrate on touch. I feel like this improve my touch sensitivity.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
Turned off vibrate on touch and it seems a bit more more responsive in some areas, even though it probably is placebo. I have an iShieldz screen protector (similar to Zagg) and noticed that it wouldn't respond when I tap the screen sometimes. Though, I think that's the way I tap the screen, edge of finger vs finger.
Sent from my C6806 using xda app-developers app
shook187 said:
I found this issue to be greatly improved with the iLLumiShield screen protector. But it was definitely more of an issue with the cheaper screen protectors. You also might want to go to settings/sounds and uncheck vibrate on touch. I feel like this improve my touch sensitivity.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
Ok. Thanks for answer. One more: I see there are 3 different ILLumiShields: matte, cristal clear and blue light. Which one you recomend? Or which one you have and recomend?
Tapatalked from C6833
Regarding Illumishield, is it just me or does it sound fishy to anyone else? Lifetime-Guarantee, but they send you 2-3 in a single package?!
S.D.Richards said:
Regarding Illumishield, is it just me or does it sound fishy to anyone else? Lifetime-Guarantee, but they send you 2-3 in a single package?!
Click to expand...
Click to collapse
One for you, one for your wife and one for her mother!
Tapatalked from C6833
FRM300 said:
Ok. Thanks for answer. One more: I see there are 3 different ILLumiShields: matte, cristal clear and blue light. Which one you recomend? Or which one you have and recomend?
Tapatalked from C6833
Click to expand...
Click to collapse
I bought the crystal clear one
Sent from my C6833 using xda app-developers app
---------- Post added at 08:57 PM ---------- Previous post was at 08:55 PM ----------
S.D.Richards said:
Regarding Illumishield, is it just me or does it sound fishy to anyone else? Lifetime-Guarantee, but they send you 2-3 in a single package?!
Click to expand...
Click to collapse
I don't over think on something I paid $14 for
Sent from my C6833 using xda app-developers app
cavallino33 said:
I have the glass-M galss screen protector. It's almost $40 with shipping but it's front and back glass. Its very well made, easy to apply and is more fingerprint resistant than the unprotected glass with it's ASF.
Click to expand...
Click to collapse
Thanks for the tip. Just bought one. Been wanting a protection like that for my phone ever since removing the factory protector. The phone is a fingerprint magnet without the ASF. However found it for $16 and free shipping to Sweden (only front protection though, don't need it for the back).
http://www.aliexpress.com/item/Xper...otector-For-Sony-XL39h-Xperia/1478547885.html
I applied Glass-M screen protectors on both the front and back of my phone yesterday, and have been very happy with it so far. It's added a little weight, but it feels sturdier and more premium than before, and looks better than the plastic screen protector I had previously. The touch is also a lot smoother than the plastic one, which was a bit rubbery. I installed mine on top of the ASF, both front and back, since I didn't want the "harrowing" experience of removing it. I feel like it's protected well enough to do without a case, though I may get a slim one to cover the edges of the phone as well. Highly recommended. :good:
GlassM is horrible??
Firstly look at these awful photos I've taken:
First go to Dropbox.com, following site:
https : // dl.dropboxusercontent . com
add the following lines for the photos right afterwards:
/u/45730680/GlassM Kratzer/GlassM_1.JPG
/u/45730680/GlassM Kratzer/GlassM_2.JPG
/u/45730680/GlassM Kratzer/GlassM_3.JPG
/u/45730680/GlassM Kratzer/GlassM_4.JPG
Can someone link these sites directly? Would be nice, thanks in advance. Email: [email protected]
I will send you the links to the images!!
Received my GlassM this week, applied it yesterday. For whatever the reason, there is now, after 12 hours of use, a 10cm large, deep scratch (no, it's not dust, polished few times). Over the first night, the screen got the crack though. This morning I've noticed the deep scratch.
Yesterday evening, just sliding over my wooden table, impressed of its smooth, I notived two smaller light scratches. I thought so, "ok thats not really your truth, GlassM", but now it's really enough.
GlassM's support does not reply to my support request unfortunately.
Can someone recommend other Glass-protectors for my beloved ZU?
Greetings,
slay
So after experiencing first hand the poor figment of any tempered glass screen protectors I have deiced to create this OP. I have purchased 3 types of plastic screen protectors from amazon to see which if any will be a suitable replacement. I figured if I buy some and they are terrible I can always return them.
1. Mr Shield clear:
http://www.amazon.com/gp/aw/d/B00OD...416363968&sr=8-1-spell&pi=AC_SX110_SY165_QL70
I had high hopes for these after buying them for my Nexus 9 and having s good experience. The ones for the Nexus 6 are a far different story. The fitting is so poor they cant cover my display. I believe that these were cut very poorly because you can't align them properly to fit even with their tiny size. They have a nice feel and are easy to swipe back and forth on while using the office but if they can't protect my screen then there's no point in having it. (Pictures coming soon)
2. iSmooth:
http://www.amazon.com/gp/aw/d/B00O3OSBHI/ref=mp_s_a_1_1?qid=1416364063&sr=8-1&pi=AC_SY200_QL40
3. icarez: (coming Wednesday)
These looks just the the Mr Shield screen protectors above, except they are packaged better and come with better instructions. The downside is that they are again cut very small. I have learned that this is due to the curved nature that the ends of the display have, but its rather unfortunate that we are left with a screen that can't be fully protected. These also have a better feeling that the Mr. Shield protectors.
4. Spigen Crystal:
http://www.amazon.com/Protector-Spi...533171&sr=8-1&keywords=spigen+crystal+nexus+6
These are the best plastic screen protectors by a long shot. The fit and finish is far superior to any of the other brands that I have tried thus far. They are very thin compared to the other 3 I tried above. The costing allowing your fingers to slide across it with ease for people who prefer the gesture typing. The screen protector does cover the camera, and proximity sensor. Don't let this discourage you because they both work fine on my phone. The fit is much closer to the curves without causing issues. There is a fix for people with proximity sensor issues in the tempered glass OP. I would recommend these to anyone who wants a nice quality screen protector.
Update: from what I have seen, the Spigen is still your best bet. I have a couple as backups and I couldn't be happier. TG has been and still is very hit and miss but you can't go wrong with the Spigen Crystal screen protectors. I have no issues with my proximity sensor for FFC and its the only screen protector I've used since discovering it.
feel free to add your own choices and a brief description about the quality and whether or not you would recommend it.
I got the iSmooth protectors. A little difficult to install, but quite good once they're on. They feel almost like glass, they have a coating on them to prevent fingerprints too.
ryude said:
I got the iSmooth protectors. A little difficult to install, but quite good once they're on. They feel almost like glass, they have a coating on them to prevent fingerprints too.
Click to expand...
Click to collapse
This Review differs, http://www.amazon.com/Google-Nexus-...tBy=bySubmissionDateDescending#R1XWOBSF3898N4
What is your opinion?
Cheetohz said:
This Review differs, http://www.amazon.com/Google-Nexus-...tBy=bySubmissionDateDescending#R1XWOBSF3898N4
What is your opinion?
Click to expand...
Click to collapse
Pretty sure the cutout isn't for the camera, but the ambient sensor.
i ordered the invisible defenders. should be here tomorrow just ahead of the phone. never used them before as i've always gone with spigen, but since they're not shipping until next week i went with these. from a spec perspective, they sound every bit as good as the spigen crystals. i'll find out tomorrow/friday
http://www.amazon.com/gp/product/B00NU7DMC8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
indianajonze said:
i ordered the invisible defenders. should be here tomorrow just ahead of the phone. never used them before as i've always gone with spigen, but since they're not shipping until next week i went with these. from a spec perspective, they sound every bit as good as the spigen crystals. i'll find out tomorrow/friday
http://www.amazon.com/gp/product/B00NU7DMC8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Let us know how they are. The Spigen ones are good from past experience ( I won't buy their TG again) I hope they are offered with prime to make shipping faster.
I was planning on getting a glass protector, but after reading several posts here I see that is a bad idea.
I normally bought Zagg with my S4, but I'm not really sure what kind I want to get with my new Nexus 6. I absolutely HATE finger prints so anything that gets them easy is a no go for me.
for anyone that bought from SuperShieldz on amazon they just sent me this:
Dear Customer
We would like to inform you that the nexus 6 screen protector we sent to you is incorrect for the camera lens. The proper one will be send to you on Next Monday. Sorry and we apologize for any inconvenience.
Best Regards,
Ann
I would stay away from the iSmooth screen protectors. Received mine today and they are not properly aligned for the front camera as the protector covers it. Only reason I'm not returning is because I need something on the phone until the other screen protectors I ordered arrive.
My Xtreme Guards had the wrong camera cutout also. If all these companies have the wrong cutout, were they given the incorrect dimensions from Motorola when they all started cutting these out?
PaisanNYC said:
My Xtreme Guards had the wrong camera cutout also. If all these companies have the wrong cutout, were they given the incorrect dimensions from Motorola when they all started cutting these out?
Click to expand...
Click to collapse
According to iSmooth, yes that's exactly what happened.
Thank you for purchasing our Nexus 6 screen protectors and writing a review on your experience with them. I sincerely apologize for the inconvenience you have experienced thus far with our product. Since we are extremely fanatical about our customers, I wanted to reply back to you so I could explain the errors behind the engineering of the Google Nexus 6 screen protectors.
I will point out that in order for us to get to market by the Nexus 6's launch date sometimes we have to make an educated guess with our screen protectors. This time, we failed with our cutout design.
Below are the key points that will point out where our screen protectors were either botched or made to fit this new device and the reasoning behind it:
1.) The cutout for the camera is a full camera width to the left of the actual camera -- this is obviously a mistake. However, the clarity of the screen protector will still insure that the camera is NOT affected by the screen protector. It is just customary that the cutouts exist. However, there will still be a little notch for no reason on your screen protector. We sincerely apologize for this error.
2.) The screen protector will NOT go "edge-to-edge" but that was done on purpose as there is a curved edge on the Nexus 6.
3.) If it did go "edge-to-edge", then the screen protector will lift up on the edges as it would not properly adhere to the curved edges.
4.) We decided that 95% coverage on the phone was better than having faulty screen protectors.
5.) Our screen protectors were also meant to work with cases which means if we DID cover the edges of the screen, then the case would force the screen protector to lift and cause a lot of bubbling and ruin the screen protector.
Please know that getting a revised cut of our Nexus 6 screen protectors is top priority at iSmooth - our customers are our #1.
If you would like to receive these updated screen protector cuts when we receive them, please email [email protected] with your name, mailing address and Order Number. When we receive them we will promptly email you and mail those corrected screen protector replacements out post haste with absolutely NO charge to you.
Or, should you need anything else or have any other concerns at all, kindly contact me at that same email address - I sincerely want to help and make this situation right by you.
Have a nice Wednesday and I hope to talk to you soon,
Channele
Customer Support Manager
Click to expand...
Click to collapse
I'm updating the OP it appears like there will be no good screen protectors that are edge to edge with the exception of wet install ones which are a nightmare. I wouldn't risk a wet install with FF speakers but that's just me. I may just get a dbrand front skin to cover the gaps.
Pilz said:
I'm updating the OP it appears like there will be no good screen protectors that are edge to edge with the exception of wet install ones which are a nightmare. I wouldn't risk a wet install with FF speakers but that's just me. I may just get a dbrand front skin to cover the gaps.
Click to expand...
Click to collapse
I never even thought about that. I liked the Zagg ones but on my S4 there isn't front facing speakers.
Zenzr said:
I never even thought about that. I liked the Zagg ones but on my S4 there isn't front facing speakers.
Click to expand...
Click to collapse
Thats what I am worried about the most. The speakers are rather large and I've had bad experiences with wet install screen protectors. They killed my LG G Pad 8.3 (even when I barely put any solution on it, some managed to get into a small gap). Anyway I guess I'll see what else is available.
i just need any of the three screen protectors i ordered to show up. This POS one they put on the phone out of the box is killing me. I swear, would it kill moto (or any other manufacturer) to at least put a half way decent one on the device out of the box?
mb3030 said:
i just need any of the three screen protectors i ordered to show up. This POS one they put on the phone out of the box is killing me. I swear, would it kill moto (or any other manufacturer) to at least put a half way decent one on the device out of the box?
Click to expand...
Click to collapse
I'm pretty sure it's not an actual screen protector, just something to cover it until it gets to your door.
Zenzr said:
I'm pretty sure it's not an actual screen protector, just something to cover it until it gets to your door.
Click to expand...
Click to collapse
whatever- you know what i mean. This would add like a penny cost to a big manu
Pilz said:
Thats what I am worried about the most. The speakers are rather large and I've had bad experiences with wet install screen protectors. They killed my LG G Pad 8.3 (even when I barely put any solution on it, some managed to get into a small gap). Anyway I guess I'll see what else is available.
Click to expand...
Click to collapse
Well, I guess I won't be installing the wet ones I just got when I get my device.
mb3030 said:
i just need any of the three screen protectors i ordered to show up. This POS one they put on the phone out of the box is killing me. I swear, would it kill moto (or any other manufacturer) to at least put a half way decent one on the device out of the box?
Click to expand...
Click to collapse
heh that pos oem one the phone comes with lasted me a good month on the nexus 5. worked great!
anyway, my invisible defenders are out for delivery today. of course my phone isnt being delivered until tomorrow...
I ordered Spigen's for the N6. I Love it! can't even tell that i had one on my N5. As smooth as the screen.
---------- Post added at 10:17 AM ---------- Previous post was at 10:16 AM ----------
Pilz said:
I'm updating the OP it appears like there will be no good screen protectors that are edge to edge with the exception of wet install ones which are a nightmare. I wouldn't risk a wet install with FF speakers but that's just me. I may just get a dbrand front skin to cover the gaps.
Click to expand...
Click to collapse
I prefer wet install. I get the best install. Plus isn't this phone "splash" proof? (or was that a miscommunication?)
I've been reading all the threads in the forum after I brought my OP 5 yesterday (supposed to arrive to me in the next 2 weeks) and I cant find any solid recommendation.
There aren't any brands making screen protectors to our devices and even less reviews.
-I saw people saying to stay away from the original screen protector made by Oneplus due to the few millimeter lost cause by it.
-I looked on the Orzly screen protector and it looked quiet well but after searching the web I saw multitude negative reviews due lack of adhesiv, dot metrix and rainbows showing up on the screen. but some other who claims the protector is completely fine
In conclusion: In the Glass screen protectors section, there is no good product that will be fine with guarantee ?
If so, there is any other kind of screen protector (not glass one's) such as Skinomi or IQ Shield that are recommended?
I have to order any kind of screen protector as soon as possible before my device will arrive.
thanks for your professional support !
Every single option, glass or TPU, sucks. The best option is the non-glass protector that ships applied to the phone. Baby that one as long as you can.
Goronok said:
Every single option, glass or TPU, sucks. The best option is the non-glass protector that ships applied to the phone. Baby that one as long as you can.
Click to expand...
Click to collapse
I would agree with you, when it wouldn't collect more dust than a vacuum cleaner.
GTI86 said:
I would agree with you, when it wouldn't collect more dust than a vacuum cleaner.
Click to expand...
Click to collapse
Still the best, even covered in 2" of lint lol
As much as the screen protectors suck, the Orzly is stil the best of the bunch. I have it installed with no rainbow effect in the middle. Again, I think this is a case of people who have the issues are the ones you see. It depends on how you install it I guess. I know a few others who have also installed it without the rainbow, but I know people who have installed it and have had the rainbow. At least it is a fully screen protector, that doesnt cut off a millimeter of the screen basically, and at least they aren't a company that blames the user for obvious issues with their TGSP *cough* Oneplus *cough*
Take it from someone who has been through 5+ different screen protectors... About the only one that was semi worth a damn was Orzly. You run into ones that don't fill the entire screen and leave the edges exposed, don't stick, cover the front camera or ones that just flat out don't end up sticking. I wish I didn't end up taking off the one that the OP5 came shipped with but oh well lesson learned. As I said as of right now the only semi decent one is Orzly but even that one I had issues with the glue towards the edges peeling so the screen wouldn't respond because the protector was coming off the screen a little. Still though - Orzly or Manufacturer screen that was originally on the one are your best options at this point.
I really like the IQ branded film protector. I've had no problems with it and I only really notice it when I swipe along the edges and feel the film.
xeonyxorich said:
I really like the IQ branded film protector. I've had no problems with it and I only really notice it when I swipe along the edges and feel the film.
Click to expand...
Click to collapse
do you use the clear protector or the matte one?
how does it feel ? smooth enough? fingerprints residue ?
you dont have problems using it with cases?
liadatz said:
do you use the clear protector or the matte one?
how does it feel ? smooth enough? fingerprints residue ?
you dont have problems using it with cases?
Click to expand...
Click to collapse
I'm using the clear one. It's definitely not as smooth as glass but it's smooth enough. It's more smooth than a glass screen without a oleophobic coating. Fingerprint residue is minimal. The only case I have is the sandstone one from OnePlus and I have no problems with it.
xeonyxorich said:
I'm use the clear one. It's definitely not as smooth as glass but it's smooth enough. It's more smooth than a glass screen without a oleophobic coating. Fingerprint residue is minimal. The only case I have is the sandstone one from OnePlus and I have no problems with it.
Click to expand...
Click to collapse
Using the clear IQ protector here too. So far it's the best I've found. I've used the official TGSP, Orzly TGSP, and a couple other cheaper TGSPs. The wet application film screen protectors are the way to go for this phone it seems. Helps a lot with finger prints and I haven't had any issues with it not being slick enough.
think ill just go nude and use a thick case lol. haven't had any scratches on my s8+ which also has gorilla glass 5.
man do i hate how all phones have curved glass of some sort.
Damn those curves.. Let's hope that maybe in a few weeks we will finally get a proper screen protector.
cdig said:
think ill just go nude and use a thick case lol. haven't had any scratches on my s8+ which also has gorilla glass 5.
man do i hate how all phones have curved glass of some sort.
Click to expand...
Click to collapse
I went and removed the factory installed protector, it was a bad idea. Now I have small hairline scratches on the bottom right corner. I've now ordered a tempered glass in Amazon to hide the scratches.
The one that came with the phone is fantastic imo. I haven't enjoyed tgsp since my nexus 6p because of the 2.5D curved glass craze, no tgsp fits any phone good anymore. Axon, Samsung (ROFL, you thought OUR screen was bad?) , I haven't looked at the screen protectors for the G6, but the screen doesn't appear to be 2.5d so that's a step in the right direction..
When my stock screen protector gets unusable, I'll buy the 30$ crash guard from rhinosheidl ?????? Just to see if the hype is real...
Unless someone already has photos of it....
MrWilsonxD said:
The one that came with the phone is fantastic imo. I haven't enjoyed tgsp since my nexus 6p because of the 2.5D curved glass craze, no tgsp fits any phone good anymore. Axon, Samsung (ROFL, you thought OUR screen was bad?) , I haven't looked at the screen protectors for the G6, but the screen doesn't appear to be 2.5d so that's a step in the right direction..
When my stock screen protector gets unusable, I'll buy the 30$ crash guard from rhinosheidl Just to see if the hype is real...
Unless someone already has photos of it....
Click to expand...
Click to collapse
Any idea when the crashguard is shipping. I don't wanna drop that type of money without looking at reviews.
A Guy Called Revive said:
Any idea when the crashguard is shipping. I don't wanna drop that type of money without looking at reviews.
Click to expand...
Click to collapse
No idea whatsoever, my stock screen protector from oneplus is still in fantastic shape, so I don't imagine ordering four a couple more months at least.
The ones for the oneplus 3 are 13 dollars on amazon, and ship with prime in the US.. So I imagine in a few weeks the price will become more better.
I've recently seen this on the taobao site. GOR branded TSP. I've used their flat ones on other phones and am quite satisfied with the performance. They have 2 versions, one with the black border, one with a edge sealant sort of thing. I'm planning to get the sealant version next month since my option to add items for cheap shipping is exhausted for July....
If anyone's in China or has bought one, some feedback would be appreciated.
https://m.intl.taobao.com/detail/detail.html?id=554613982294
Sent from my ONEPLUS A5000 using Tapatalk
A Guy Called Revive said:
Any idea when the crashguard is shipping. I don't wanna drop that type of money without looking at reviews.
Click to expand...
Click to collapse
https://rhinoshield.io/products/oneplus-5-bumper-case?variant=35872333313
RhinoShield should be out by second half of August according to their site.
failure_2_win said:
https://rhinoshield.io/products/oneplus-5-bumper-case?variant=35872333313
RhinoShield should be out by second half of August according to their site.
Click to expand...
Click to collapse
that's only their bumper.
they are already sending out screen protectors.
i just received mine.
will send it back right away.
waaaay to small, doesn't even cover the display correctly.
Dinjesk said:
that's only their bumper.
they are already sending out screen protectors.
i just received mine.
will send it back right away.
waaaay to small, doesn't even cover the display correctly.
Click to expand...
Click to collapse
Its says in the description, "Not edge to edge protection. (NOT FULL COVERAGE)" so there is no false advertising