I have flashed LG Prada uboot on my LG P768 wrongly, and I have a phone knows no hardware like LCD and Vibrator (vibrates when phone turns on), but windows knows it as OMAP device.
Please guide me how I can find the image for U2 board and how I can flash that?
(I can put the phone in fastboot mode for seconds! :fingers-crossed
Thanks for any participation ...
Related
Hi everyone.
First sorry my poor english.
Yesterday I received a phone (LG L4 II E467F Dual SIM) from a customer, the unit was but connecting the loading stopped with the LG logo and stand on this screen. I tried to upgrade the PC Suite, the cell was placed in download mode and the update is performed by the software, download and recording was carried out on the device during the recording process progress was up to 94% with the power on, when he got 95% the device was turned off automatically (A device's battery was at about 70% during the process), then the process has reached 100% normally without error messages.
After this the phone turned a brick, does not care, does not vibrate, does not go into download mode, finally does nothing. But noticed that it was shown in Windows Device list without driver. I used a software to install drivers and the device driver has been installed and he was recognized as "USB Port MTK (COM5)."
I watched a few topics about it, but could not properly understand the procedure and I was afraid to end any device recovery chance.
http://forum.xda-developers.com/showthread.php?t=1943442
http://forum.xda-developers.com/showthread.php?t=2160490
http://forum.xda-developers.com/showthread.php?t=1943442&page=91
https://www.youtube.com/watch?v=TQvdJwvqKZ4
Does anyone know how I can recover the bootloader of the device?
The bootloader is my biggest concern, because if the device start and stop again with LG logo can at least return the device to the customer
I was trying to downgrade my Tribute 2 to stock firmware by following this guide:
"LG Tribute 2 LS665 Unbrick with Stock ROM"
(you can Google it, sorry I can't post links yet)
The LG flash tool "FAILED" at 99%, and now the phone is in a really bad state. I can tell that it powers on, because it shows up in Windows 10 Device Manager as a Qualcomm 9008 Gobi Modem. However, nothing appears on the screen even if I try to boot into recovery mode. So, we can assume that whatever is on the eMMC is completely hosed.
Is there any way to resurrect this phone?
Hello everyone,
after putting my phone in download mode, I flashed the wrong kdz, so now it doesn't boot in anyway:
I have no fastboot, no download mode, it does not switch ON.
I found several guides on the internet , but none of them seems to work.
Can you help me? Thanks
eagle93 said:
hello everyone,
after putting my phone in download mode, i flashed the wrong kdz, so now it doesn't boot in anyway:
I have no fastboot, no download mode, it does not switch on.
I found several guides on the internet , but none of them seems to work.
Can you help me? Thanks
Click to expand...
Click to collapse
i have this same problem
Hi,
same issue - Unbrick LG V10 (H960a) stuck in Qualcomm HS-USB QDLoader 9008 mode
Ive searched and find several solutions, buitr not for H960a.
Like:
https://forum.xda-developers.com/tm...ent/debrick-phone-h901-qualcomm-9008-t3440359
Do anybody have IMG for SD card to boot to downloadmode and fix this brick?
Mayby any familiar version wioll work too (Ive tried already H9012j, H81120o, and H901)
This also did not worked
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
hai friends please help me.. my v10 is F600L but my friend by mis falshed with h961N that one dual sim and my F600L is single sim after flash no network so I tried to falsh back to F600L but my phone dead now after 90% flash.
only vibrate when i press power button
pc also not detecting anything like qhsusb or nothing
no download mode nothing
please any expert here help me...
hope any guy know about it
thanks in advance
Lg v10 h960a
Hi, I have the same problem, could you fix it? Thank you
I'm fighting with my fiends phone for over 3 days now, same as yours 960A. What i did is, try to heat the CPU up, rly rly high, and then try to turn on/fastboot it. If its not working, put it into freezer, and try to boot it inside a freezer. After 2 days i managed to get to fastboot few times, flashed stock firmware and right now im stuck on bootloop, but that is fixable. Just play around with heat, this phone is bricked anyways so dont be scared to take of heat sink and just blow your hair dryer straight to CPU.
xsoft said:
Hi,
same issue - Unbrick LG V10 (H960a) stuck in Qualcomm HS-USB QDLoader 9008 mode
Ive searched and find several solutions, buitr not for H960a.
Like:
https://forum.xda-developers.com/tm...ent/debrick-phone-h901-qualcomm-9008-t3440359
Do anybody have IMG for SD card to boot to downloadmode and fix this brick?
Mayby any familiar version wioll work too (Ive tried already H9012j, H81120o, and H901)
This also did not worked
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
Click to expand...
Click to collapse
Pls share the lg v10 H9012j.img file pls.
Hello everyone!
I'm not good at English, so I'm sorry if it is difficult for you to understand my English.
I downgraded from Andoroid 6 to Android 5.1 using LGUP.As a result, when turning on the power of v 10, the power will be turned off after the LG logo appears.I wasn't able to enter the download mode.
It is recognized as Qualcomm HS-USB QDLoader9008 now.
Please tell me how to fix it.
mr.bushido252 said:
Hello everyone!
I'm not good at English, so I'm sorry if it is difficult for you to understand my English.
I downgraded from Andoroid 6 to Android 5.1 using LGUP.As a result, when turning on the power of v 10, the power will be turned off after the LG logo appears.I wasn't able to enter the download mode.
It is recognized as Qualcomm HS-USB QDLoader9008 now.
Please tell me how to fix it.
Click to expand...
Click to collapse
Yes there is a chance to fix your probleme by Sdcard dump look in the section lg v10 you find article how to proceed.have a nice night
magma506 said:
Yes there is a chance to fix your probleme by Sdcard dump look in the section lg v10 you find article how to proceed.have a nice night
Click to expand...
Click to collapse
Thank you.
I probably saw the article.
↓
https://forum.xda-developers.com/tm...ent/debrick-phone-h901-qualcomm-9008-t3440359
But I do not have dump.img of H961n.
I could find dump.img of H901.
I want dump.img of H961N. . .
pls can tell me what you do ihave h916n brocked
please i want to know if there is any update happened with you because i have also h961n and i cant find the image file
i tried to extract the rom into many .bin files but which file i should take to burn on the SD card
please this is my email: [email protected]
and facebook : the.amr.world
let me know if you have any new and off course me too i will inform you
LG H961N - Qualcomm HS-USB QDLoader 9008 Mode
mr.bushido252 said:
Thank you.
I probably saw the article.
↓
https://forum.xda-developers.com/tm...ent/debrick-phone-h901-qualcomm-9008-t3440359
But I do not have dump.img of H961n.
I could find dump.img of H901.
I want dump.img of H961N. . .
Click to expand...
Click to collapse
I have LG H961N, I tried the link mentioned. I used Samsung 32GB SD card, flashed H901 disk image (this seems to be a DD image, checked using Rufus). With the battery plugged in, the phone would turn on after 10mins and all I see is just the LG logo screen and nothing happens after that. I couldn't get it in download mode as it takes 10mins to get to the LG logo screen. Once I get the LG logo screen, I see "LGE androidnet usb serial port (com no.)" in the device manager. I tried LGUP, where the device type couldn't be identified for further process. Same thing with LGNPST, QFIL doesn't help. I wonder if the SD card should be 64GB as the disk image shows 58.24GB size in Windows Disk Management utility.
I wanted to install the lineage firmware on my lg g2 phone, the instructions said to downgrade the bootloader version after I encountered a problem that the phone does not turn on; boot certification verify. What to do as quickly as possible I want to solve the problem, in other guides on xda the pictures or links are not working, the specific id of my phone LG G2 D802, sorry for my bad English. and i have black screen boot. help plz. thank you
I want to add that when connected to a PC, it is defined as Qualcomm hs-usb Diagnostics 9006
and create more disk about 10-13 and 1 disk have files
adb dont work . fastboot too . help plz