FAQ
If after reading the FAQ You still have questions ask in the main thread
How to select default SIM for calls, SMS or Internet access?
You Need to go to Settings - SIM card and select the relevant item.
How can I do that would be asked which SIM to execute a call and/or send SMS?
You Need to go to Settings - SIM card or a Phone calls - First to ask and/or SMS to ask First
When you call on the second SIM the same ringtone as on the first, how to fix?
You Need to go to Settings - Sounds and there to choose the Ringtone SIM1 and SIM2 Ringtone to choose a favorite
Not working vibration when incoming SMS, how to fix?
Go to the Messages app tap the 3 vertical dots - Settings and activate Vibrate
The vibrating alert does not work and the ringtone at the same time, how to fix?
Go to Settings - Sounds - include vibrating alarm, and also in the Phone app tap the 3 vertical dots - Settings - General settings and tick the Vibrate for calls
How to make a screenshot?
Button down volume + power button
On ROM LineageOS 14, RR Nougat and AICP12.1 need to take screenshots using the Screenshot app in Mode 3, 15 or 17 (root). It is better to use Mode 3, but it may not be, often it depends on Your DPI settings.
In the ROM there is no FM Radio, where to find it?
Need to install the application Spirit1 Real FM Radio
Set Spirit1 Real FM Radio, but after running the application, the radio does not work.
The application Spirit Real FM Radio go to Settings --> Audio --> from the list choose Samsung S3/Note/S2_ICS
Set Spirit Real FM Radio and configured, radio not working.
For CM12.1 or CM13 install SELinux Mode Changer. After running SELinux Mode Changer click to Permissive.
How to record videos ( Screencast ) in CM12.1?
So Far the ROM has no built recording video from the display, but you can use a third-party application
How to enable "Developer Mode"?
In Settings -> About phone tap 7 times on "Build Number"
Where to view the numbers on the SIM card?
In the standard contact Manager can only import.
How to enable advanced reboot options?
Settings > Developer Mode > enable Reboot Options
P. S. On the lock screen, the extended reboot menu may not work.
On the router the device is visible as androd-lettersnumbers, can it change?
Yes, you can. Go to Settings - Developer Mode - Network device name and specify the desired name.
How to install stock applications on CM/AICP/RR/Lineage?
No way. The stock app will not work on CM/AICP/RR/Lineage
I often use the app "App" and/or "Game", but there are glitches or doesn't work. What to do?
Wait for the app and/or game will be finished under Android L.
In CM12.1 i want to change the name and avatar of the user in the settings, but writes no such contact. What to do?
Go to Contacts, there would be an item to Set the profile - add photos in the Full name field, type the desired name. All. Contact you can delete the avatar and name to save.
I noticed that the display turns on when notification comes, how to change it?
Go to the Settings Screen and display - turn off prohibition from hibernation.
How do I enable/disable Dual SIM?
Dual SIM support is enabled by default. If you only use 1 SIM and wants to disable Dual SIM support, you can use the following instruction:
http://blog.shubhangrathore.com/multisim-toggle/
Can you include Feature X into your ROM?
No. This ROM will have CyanogenMod's feature set.
Can you include S-Note/S-Planner/MultiWindow/Insert Samsung App Here?
No. This is an AOSP ROM and cannot have TouchWiz applications.
Can you include call recording?
No. CyanogenMod does not include call recording to avoid potential legal issues.
Can you add Feature X to the stock ROM?
No. I don't work on stock ROMs.
What kernel does this ROM use?
A slightly modified version of the stock kernel, the source code is linked above.
How to change the density in CM/RR/ACIP
For this you can change the DPI of the display, go to Settings > Display > screen Density > of the list to select the desired density.
For ACIP to go to Settings > Advanced settings > Screen and animations > screen Density > from the list choose the required density, or specify your own.
I've heard that Broadcom doesn't release source, how can you make this ROM?
Contrary to the popular belief, userspace driver source code is not always required to make an AOSP-based ROM as long as the proprietary binaries shipped with the device does not modify the API too heavily (or is from a very different version of Android). Instead of modifying the source code of the drivers, the Android source code was adapted to be able to use the proprietary binaries.
Will you make this official CM?
Due to the amount of work and commitment involved, I am not planning to make an official CM port.
Where can I see the numbers on the SIM card?
In the standard contact manager, you can only import them.
Continued
Can contacts be saved to phone/SIM?
No. It is not supported in AOSP-based ROMs.
Can I send files over Wi-Fi Direct?
Yes, but you must use third-party applications. The implementation provided on Samsung ROMs is not an open standard. AOSP/CM does not provide a native way to send files over Wi-Fi Direct.
Can I mirror your ROM?
You're free to, but I will not list it in this post.
Will feature X from a previous version of CM be implemented?
I don't know, probably will be, eventually. I don't really involve myself in the feature-set side of CM.
Will you add OTA support?
No.
I cannot add APNs
Make sure you set the correct MCC/MNC code, the APN will not appear otherwise. Also make sure to use menu -> save (back button means discard).
In CM13/RR 5.6.5-5.7.4/AICP11 installed WhatsApp but can't send a photo, how to fix?
Very simply, you need to restart the device.
If after reading the FAQ You still have questions ask in the main thread
Kiborg_Man said:
In the ROM there is no FM Radio, where to find it?
Need to install the application Spirit1 Real FM Radio
Set Spirit1 Real FM Radio, but after running the application, the radio does not work.
The application Spirit Real FM Radio go to Settings --> Audio --> from the list choose Samsung S3/Note/S2_ICS
Set Spirit Real FM Radio and configured, radio not working.
For CM12.1 or CM13 install SELinux Mode Changer. After running SELinux Mode Changer click to Permissive.
Click to expand...
Click to collapse
Hii Kiborg_Man the main difficulty with the rom I am currently facing is the wifi button freezing on able to use wifi please fix this issue...
Thank you for the rom:good::good:
Related
Download latest version on www.commmgrpro.com
Available version for Square, QVGA, VGA, 320x320 and 400x240(Omnia) vesions...
V2.7(2009-11-26)
1) Compatibility to switch band with HTC Touch HD2
2) Compatibility to switch band with Toshiba TG01
3) switching is faster because now I dont turn radio off, just unregister and register from network. No need to enter automatically PIN code too.
http://www.commmgrpro.com/files/CommMgrPro_V2.7.CAB.zip
V2.6.1b2(2009-07-27)
1) Support for Widcomm BT Stacks (HTC Diamond2, HTC Touch Pro 2, IPAQ devices, etc)
2) German texts fixes. (Thanks Michael Pauliks ¡)
Latest Version V2.6(2009-04-01)
The installer CommMgrPro_2.6_RIL_RegUnreg.cab is a solution for same devices that doesnt refresh its location correctly after some hours. Please try it
I ve attached the file containing only the program, without theme. Require a theme installed. Its name is CommMgrPro_2.6.cab
I ve created a installer containing the skizzo theme for all the resolutions. The ones that are not adecuated for the device are remove on install. But I couldnt upload it. This is a direct link
http://www.commmgrpro.com/files/CMP_2.6_QVGA_VGA_SQUARE.zip
1) Bug fixing.
2) Button refresh now recalculates which schedule should be active and do it.......
3) SMS and Mail actions improved with a button to choose an outlook contact.
4) New action to sync an email account
5) Now you can copy one time frame (with its actions) or all the time frames of a schedule and paste it to other weekdays of the same or other profile.
6) In the paste procedure you can select to remove all the time frames of the destiny profile & weekday or delete only the time frames that could overlap with the new ones.
7) On install you can choose to install as a process or as a service.
8) When you change the state of BT, WIFI or speaker, using main window or as an action now you can select "Monitor and keep the state". In this way CMP will reapply the state if windows or other program changes the state. Very useful in some devices that currently turn BT off to save battery (so your connection to your Headset is lost) or when windows turns wifi on automatically but you dont want it.
9) New Action: Close Idle connections now can be activated/deactivated as an action.
10) New Action Upload data to configure this feature to OFF/ON state. So you can select when CMP should upload location changes to the server
Version V2.6b3(2009-03-24)
Version V2.5.3(2009-03-16)
1) Bug fixing arrived with service feature:
1.1) Schedule Engine. Some schedules didnt work correclty.
1.2) Virtual Secretariat.
1.3) Button Plan now works correctly
1.4) CMP crashing ocassionally with splash screen stated "Creating GUI"....
2) Now you can lock a profile being in a schedule EOAP (Execute On Any Place).
3) Pause/Resume CMP using the main menu. When CMP is paused it wont execute actions.
3) Upgrade instructions:
3.1) Close CMP (Menu/Exit).
3.2) Copy the cab to the device.
3.3) Dont uninstall first. It will remove your registry settings, your activation code, etc.
3.4) Click on the cab file. It will uninstall/install the new version. These process can take several minutes. Please be patient and dont reset the device until de process is finished.
3.5) Once the install process is done CMP will ask you to reset the device. Click on Yes.
3.6) If you ve any problem using Service way just change the registry key HKLM\Software\Daniel Herrero\CommMgrPro\cmp_as_service to 0 and reset the device. On boot CMP will execute as a process.
Here is the link that describes new features after 2.5.http://forum.xda-developers.com/showpost.php?p=3313774&postcount=2242
Version V2.4(2008-10-31)
1) Fixed an issue on the battery statistics.
2) Fixed an issue related to lock/unlock profiles being phone off
3) Fixed issues with schedules based on "always on" profiles.
4) To avoid confussion CMP wont let you lock a profile if it hasnt a schedule that matches current time
5) The installer has been separated in two different installers. One for CMP and others for skin. In this way a CMP update will be much smaller.
6) To avoid problems with new incomming models with "strange" screen resolution CMP will be forced to use the resolution of the current theme.
7) The way to change the band now is selected manually because of the many carrier names for the different models
8) New skin available "white" for all resolutions and others are comming¡. If you know to draw icons and you want to create a skin and share it with us please contact me.
9) To update: First install the CMP's cab. Then install a theme's cab according to your screen resolution. Then run CMP.
Version V2.3(2008-10-09)
1) Skin engine improvements.
2) Bug fixing related with phone-off action. Now you can rely at 100% about add "turn phone off" action during the night and turn it on automatically in the morning.
3) Better integration between CMP and HTC Touch Diamond/Pro. Current profile-schedule is shown in the main TouchFlo3D tab (Thanks to NLS). User can disable it on Options 3
4) CMP is autorestarted automatically if other program kills it to avoid HTC task manager closes accidentally it. To close CMP just use menu/exit
5) Support for Samsung Omnia (240x400 devices).
6) Minor bugs fixed.
Version V2.2(2008-09-12)
1) There are towers on each country with same cell id. So now the primary key for Cell Mode will be CellID + LAC. CMP will convert your database so make a backup before and will fill the lac information each time it finds a cell with lac equals 0
2) Compatibility with HTC Touch Diamond and HTC Touch Pro (Fixed Band manager, speaker manager, GPS manager and some GUI changes).
3) New option to repair the database.
4) New page for connections option (In connections/menu/options)
5) Option to disable/enable connections on roaming
6) Option to CMP startup delayed on page Options 3.
7) Option to Show/Hide the main window after start CMP.
8) Clicking on the higher part of the battery bar opens the battery page
9) Clicking on the lower part of the battery bar opens the battery page
10) Hide button is raplaced by calendar button.
11) New Today tab. This dialog lets you see the next events that will happen in the place, including calendar events, "Always on" schedules and other events (time limits, etc)
Version V2.1(2008-07-24)
1) Improved call forwarding action. Now you can choose the same kind of options like standard phone program
2) New "Restore" actions. You can choose to restore any option to previous state. For example: On enter Speaker off, on exit Restore Speaker (to same value as it was).
3) The user can reassign a profile as "default profile" in the profiles tab (menu/profiles/mark as default profile). This profile hasn't cells associated and is applied when the location is unknown.
4) CMP ask confirmation before importing a xml data file found on the device.
5) English and German translation and help files have been fixed by Ralf Rutkat. Thanks¡.Some dialogs without help page now have it.
6) Test menu disabled. Ask me if you need access to it (testers, traductors, etc).
7) When CMP says that user must restart to apply changes It can be done in that moment (yes/no buttons).
8) Phone going off bug fixed.
7) MUCH Bug fixing
features looks pretty cool!
Graphically, I have to say, it isn't so good; why not just keeping the same graph style of the original comm mgr?
stepir said:
features looks pretty cool!
Graphically, I have to say, it isn't so good; why not just keeping the same graph style of the original comm mgr?
Click to expand...
Click to collapse
mmmmm art is art and I am not art designer. But all is configurable. Images, fonts, colors......
Is there anyone that can provide graphics??
And could you compike a "non-debug" version? Thanks
Applestar said:
Is there anyone that can provide graphics??
And could you compike a "non-debug" version? Thanks
Click to expand...
Click to collapse
This is beta version and the goal is bug-fixing so debug version is needed to find them. Please keep in mind this is the first beta. Only install it if you have time to test it and report bugs. If not is better to wait some weeks for a stable version......
Greetings
This looks like a great peice of kit. Downloading now and will report any findings/bugs here
Excellent work
S.K.
silent_killa said:
This looks like a great peice of kit. Downloading now and will report any findings/bugs here
Excellent work
S.K.
Click to expand...
Click to collapse
Thanks. Ready to fix bugs. This application is complex (many oem specifics issues) so it could be a long time....but I hope finally all is fixed...
Ok just read your instructions and i'm assuming that email address is mispelt (1 m instead of 2 at the end)??
S.K.
Right fixing.....
Ok, first bug. Clicking on wifi settings brings me straight to the old comm manager screen.
silent_killa said:
Ok, first bug. Clicking on wifi settings brings me straight to the old comm manager screen.
Click to expand...
Click to collapse
well, it isnt a bug. Its what I wanted to do. Maybe I should change the text. Its a quick way to open classical Comm Mgr....
Any way to change the default place so i can remove the 'unknown' one?
danielherrero said:
well, it isnt a bug. Its what I wanted to do. Maybe I should change the text. Its a quick way to open classical Comm Mgr....
Click to expand...
Click to collapse
Or maybe do like a 'Setting1' 'Setting2' type scenario that points to the 2 settings in Control Panel. Would be nice to get rid of the old Comm Manager altogether and replace with this one once its final. Maybe just add the old CommMgr as a menu item??
Once i've created a new place and i go to edit it, the changes are not saved.
silent_killa said:
Any way to change the default place so i can remove the 'unknown' one?
Click to expand...
Click to collapse
I thought It was a good idea to setup a default place. When the current location isnt known then htis plca. This place is special because allows the set a default behaviour when the current place isnt known.....
Can i make a suggestion for the data counter?
I've noticed that the counter only clocks up for the current data session. Once the session is closed, the counter resets to 0 so you have no way of seeing how much was tranferred last session. Maybe add:
Current session
Last session
Total (with a reset counter)
Just an idea to increase functionality
S.K.
silent_killa said:
Once i've created a new place and i go to edit it, the changes are not saved.
Click to expand...
Click to collapse
Ok ignore this post. Wasn't clicking on menu---> save lol.
However, have noticed another bug. If you change the icon and then save, the name of the place is replaced with the icon name.
S.K.
danielherrero said:
I thought It was a good idea to setup a default place. When the current location isnt known then htis plca. This place is special because allows the set a default behaviour when the current place isnt known.....
Click to expand...
Click to collapse
Yeah sorry, didn't fully understand what it was all about untill now.
Just noticed a newer version already. Downloading and installing now.
silent_killa said:
Once i've created a new place and i go to edit it, the changes are not saved.
Click to expand...
Click to collapse
mmm. I cant see this bug. I create a new place and I edit it and change name, desc, and icon and it works...have you tried it again?
silent_killa said:
Can i make a suggestion for the data counter?
I've noticed that the counter only clocks up for the current data session. Once the session is closed, the counter resets to 0 so you have no way of seeing how much was tranferred last session. Maybe add:
Current session
Last session
Total (with a reset counter)
Just an idea to increase functionality
S.K.
Click to expand...
Click to collapse
Yes. The idea is to monitor data traffic per session, day and month but this options isnt included in this beta to avoid confussions on this stage....
Here is a 'Phone location based application trigger’. Launches other applications, command lines and MortScripts and anything based on time frame and location you setup. Works on Windows Mobile Professional 5/6 (PDA with Phone) only.
Some of the possible uses have been added at second post below.
This is more advanced version of my application rk-Sleep, where you could just perform one action at one location.
rk-LocSwitch can have any numbers of locations and any numbers of actions. But please do understand that this is not a 'readymade profile application' but by configuring it properly you could make it a profile application and much more. Ultimately you can automatically customize your phone based on where you are and the time span you setup.
Also support fixed actions, actions at pre-defined time, not based on the location (This is helpfull to set up backlight 'Bright' during day hrs and 'dim' during eventing/nights)(This feature is freeware and does not expire)
Now the important thing, this is not a freeware, it is 3.99 USD for XDA-Developers.com members. The trial version runs for 15 days so that you can test it and see if it satisfies you.
Update 1.0.6
Support for undefined/unknown location actions added.
Application now by default starts in minimized mode(not the sys tray mode)
Update 1.0.5
Error while 'Testing' the actions is rectified.
Update 1.0.4
Option to Show/Hide the Tray icon added
Debug support added.
Cosmetic changes done.
Update 1.0.3
Support for hide/show 'Un-Defined' location icon.
Bug fixes
Update 1.0.2
Support command line tags, eg Application could automatically send information such as LocationName, LAC, CellID by using the command line tags <LocationName>, <LAC>, <CellID. By this you could even send sms based on your location Entry/Exit along with location info.
Application can update registry with the current Location name, LAC and CellID.(HKCU\Software\rk-LocSwitch). Now your custom application can access the location information!
New menu added to copy TowerIds from one location to other.
New menu added to copy actions from one location to other.
New menu to force saving of the configuration data.
Bug fixes
Setup:
Install the application.
Run the application rk-LocSwitch from programs for the first time from the programs menu, after which the application starts automatically after soft resets.
A new task bar icon will appear in the task tray, click it to launch the application(application runs hidden, this is the only way you can access the UI to set it up)
First tab in the application is ‘General’, the information mostly read-only; you can specify the polling time (in minutes) and enable/disable the application.
‘Locations’: lot of information here. First you create a new location from the top part of the screen.
Location name is just a name such as ‘My Home’, ‘Office’ etc
Choose a icon ‘which would be displayed on the top notification bar’(you can have custom icons, just add the icons to the ‘\Icons’ folder under \Programs\rk-LocSwitch)
Check the box ‘Notify’(when ever you are at known location, a icon would show up on the title bar)
Specify the time frame such as 08:00 to 18:00(day schedule) or 22:00 to 06:00(for night schedule)
Specify if the location is of 'Undifined Type', If undefined then time frame settings are ignored and LocationIds are removed automatically.
Click OK to save this location
Add the current tower id displayed to the list, you could have multiple towers (if the location has interference from multiple towers or if you have say multiple ‘Places’ put under same location. Such as you want to configure the location ‘Office’ at two different physical locations but you want to have similar actions to perform.)
Now go to the ‘Actions’ button
You have ‘Entry’ and ‘Exit’ actions. You can add multiple actions for each action type. You can even order then ‘up’ or ‘down’. Use the ‘Action’ menu for additional commands such as ‘test the action’.
Next tab is 'Fixed Actions' here you could setup actions independent of 'Location' meaning these actions takes place irrespective of 'Locations' Useful for setting the backlight of the device.
Next tab is log where each attempt based on the polling time is logged. You can change the log action to log all, location change (Actions) only or none. Once you understand the concept put it to ‘None’(but if you think that something is not working then switch the log to all and investigate)
Last tab about: which is basically the registration module and the version info
Important notes:
Notes: if you want to configure home day and home night, you must have two locations setup such as ‘Home Day’ and ‘Home Sleep’ have the time frames carefully set e.g. 08:00 to 22:00(Home Day) and or 22:00 to 06:00(for night schedule). Do not overlap the time frames!
Keep the polling time as large as possible, unless you need real time response.(although I found keeping the polling to minimum (=2 minutes) did not make any noticeable difference to battery usage!. But test it out.
Do not forget to configure the ‘Entry’ and ‘Exit’ actions properly. Enter and exit actions generally should be cancelling each other (i.e. if you switch on flight mode on entry, make sure you have flight mode off on exit)
System is real time( ± Polling Time) , so if you are at home with flight mode activated and if you leave the home at mid night phone would switch back on.
If you really want to exit the program, use the right menu ‘Options’ and choose ‘Save & Exit’
When you start the application(not while activating the rk-LocSwitch) make sure the phone is not in flight mode
More importantly this is a ‘Switcher’ so I do not supply any command line applications to do your custom tasks; they are available in this site and over the internet. You are welcome to link in this thread so that it can be easily accessed by other users. But if some customization what you want is not available then you can make a request, and I will do my best to find one or built it myself.
Check in this thread for more pluggins
Note: This application requires Compact Framework 2.0
You need compact framework 2.0 installed inorder to run this application. The compact framework is already part of WM6, so if your device is WM6 skip this step. But most of the WM5 devices do not have this update. So you must download here and run the installation on your desktop (then active sync to update your device). Only after completing this step install the application.
Thank you all for the support.
Purchase
Download from here
Possible uses
Switch off Phone or Sound while at home during sleeping hours.
Keep backlight at low setting while inside house or office. Increase the backlight while outside house or office.
Make a alarm function say if you are at office play at mp3 at 5:00 PM
Wake you up at particular destination specifically travelling in bus or train where you travel regularly.
Load your favorite theme/wall paper as specific locations.
Send SMS on entry or exit of a location.
Will be updated…..
If you have some more ideas I am glad to update this list.
Flight Mode On/Off utility
Here is the command line flight mode on/off utility.
Command lines to switch on and off
Code:
\Program Files\rk-FltMode\rk-FltMode.exe on
\Program Files\rk-FltMode\rk-FltMode.exe off
\Program Files\rk-FltMode\rk-FltMode.exe toggle
If you are using rk-OSR to check mail you could enable and disable based on your location using the following command line
Code:
"\Program Files\rk-OSR\rk-OSR.exe" Enable --> Enables the rk-OSR
"\Program Files\rk-OSR\rk-OSR.exe" Disable --> Disables the rk-OSR
rk-TSR Support
rk-TSR a Theme Switcher, You can load a pre-set theme/wallpaper based on your location!
Code:
\program files\rk-TSR\rk-TSR.exe enable
\program files\rk-TSR\rk-TSR.exe disable
\program files\rk-TSR\rk-TSR.exe “\storage card\rkAzulBlue.tsk”
(For command line the theme must be listed in rk-TSR)
I am planning to add following new features in the near future.
Add fixed actions at specified time irrespective of the location: This might help to set back light ‘bright’ during day and low during night.
Allow actions during the device status change such as wifi connected/disconnected, active sync done, soft reset etc
If you have any specific request please go ahead let me know.
rk-bk-Light a backlight command line switcher
Here is the command line backlight switcher
Code:
[/FONT]
[FONT=Verdana]\Program Files\rk-bk-Light\rk-bk-Light.exe 2[/FONT]
[FONT=Verdana]\Program Files\rk-bk-Light\rk-bk-Light.exe 10[/FONT]
[FONT=Verdana]
Do not know if it works on all devices. But works on hermes
Note: This application requires Compact Framework 2.0
You need compact framework 2.0 installed inorder to run this application. The compact framework is already part of WM6, so if your device is WM6 skip this step. But most of the WM5 devices do not have this update. So you must download here and run the installation on your desktop (then active sync to update your device). Only after completing this step install the application.
Download from here
rk-LocSwitch Update 1.0.1
Fixes and enhancements
Added support for fixed actions
You can add any number of fixed schedules and add any number of actions on each such schedule(e.g. to set the backlight low during night and bright at day)
These fixed schedules not specific to the locations and will occur at the time specified.
Does work even if the application expired!(it is a freeware, only location service would not work)
Better file browser added, now you do not have to key in the command line.
Bug with the system not clearing some of the old notifications fixed.
Battery use better that before (almost makes no difference on the battery use!)
If you are upgrading from the old version please uninstall the old version and delete any existing notification manually (delete any notification with name ‘rk-LocSwitch’). Then install the new version.
Also added new component rk-BackLight to support setting backlight on command line.
rk-Calendar-Update: Convert all day Calendar events to time spanned events
To convert all day Calendar events to time spanned events automatically so that you don’t get reminders at midnight!
Use this utility if you are entering many appointments during day as 'Full Day Events' and difficult to manage it. Otherwise you can just run this utility once manually.
Read more about it here
Code:
\Program Files\rk-Calendar-Update.exe “08:00” “22:00”
Updates all your 'full day events' to fixed time event with specified time span.
Hmm, No one has any comments?
I really like the idea. Unfortunately, this does not work on CDMA.
tytnguy said:
Hmm, No one has any comments?
Click to expand...
Click to collapse
Wasn't there a topic about this app with many comments like adding vibration on/off? I'll try this app with hermes.
EDIT: Oh this is a new app (update of rk-sleep)
Guys, can this software send an sms to a predefined no. whenever the Tower ID changes.
mushipkw said:
Guys, can this software send an sms to a predefined no. whenever the Tower ID changes.
Click to expand...
Click to collapse
It can not send sms as it is now, if you find exe, or mortscript which could send an sms then you could use this program.
This program is like a trigger which calls other executables based on location, so as long as you can point to right executable then you are good.
But let me know if you are not able to find a executable to send sms, I might be able to build one for you.
Hi TyTnGuy,
is it possible to get the geographic Coordinatas wich assigend to the Tower ID somewhere in the www?
gnu0815 said:
Hi TyTnGuy,
is it possible to get the geographic Coordinatas wich assigend to the Tower ID somewhere in the www?
Click to expand...
Click to collapse
I am not aware of any source with the Geographic Coordinates, But with that info lot of new ideas though!
tytnguy
What kind of battery indicator app do you use?
Is it a standalone battery indicator? or part of other app?
Really nice.
Im looking from a very long time for an app. which can send an sms to a predefined no. But I couldn't find any such. I would be grateful if you can develop such app.
Thanx.
Looks realy good. Will test this on the HTC Trinity.
Keep up the good work!
mushipkw said:
Im looking from a very long time for an app. which can send an sms to a predefined no. But I couldn't find any such. I would be grateful if you can develop such app.
Thanx.
Click to expand...
Click to collapse
I am working on your request, should be there in a day or two.
Explore the FULL POTENTIAL of your Windows Mobile 6.5 !
YOUTUBE Video - HERE
YOUTUBE Video - HERE
XTreme Tweaks v1.0, best tool for Windows Mobile 6.5 personalization/customization. Easy to use, finger friendly, NO NEED FOR STYLUS!.
Available in both VGA and WVGA Resolution!
- REQUIREMENTS -
1. Windows Mobile 6.5
2. VGA/WVGA Resolution
3. .NET Compact Framework v3.5
--GUI Tweaks--
1.Start Menu Columns - Allows you to choose how many columns you want in Start Menu.
2.Scroll Bar - Choose how your scroll bar will look like. The change can be visible in Phone, File Explorer, etc.
3.Phone Keypad - This option allows you to set the theme for Phone keypad. The change can be visible in Phone.
4.ClearType - If ON, ClearType will be activated.
--System Tweaks--
1.SMS Sent Message - If OFF, this option will disable the SMS sent message.
2.STK Services - If OFF, this option will disable the SIM Operator (Network Operator) options. This will not set your Phone into Flight Mode. The change can be visible in Start Menu - your Network Operator icon.
3.Increase Font Cache - If ON, font cache will be increased.
4.Increase TCP/IP Cache - If ON, TCP/IP cache will be increased.
--Other Tweaks--
1.SIM Contacts - If HIDE, all SIM contacts visible in Contacts will be hidden.
2. Auto-Lock - If ON, your Phone will auto-lock after 50 seconds or at power button press.
3. SMS Threading - If OFF, SMS Threading will be disabled. This change can be seen in Text/Messaging at your messages.
4. Customer Feedback - If OFF, Customer Feedback will be disabled.
5. Error Reporting - If OFF, Error Reporting will be disabled.
6. In Call Recording - If ON, this option will allow call recording, see the option available when making a phone call. The recording will be saved in My Voices.
7. Right SoftKey - This option is visible with Windows Default as Today at the right Softkey.
8. SmartTouch - If ON, SmartTouch will be available in most programs.
FEATURES
- GUI Tweaks -
Start Menu Columns - 3,4,5
Scroll Bar - White, Gray, Default
Phone Keypad - Black, Gray, Default
ClearType - OFF/ON
- System Tweaks -
SMS Sent Message - OFF/ON
STK Services - OFF/ON
Increase Font Cache - OFF/ON
Increase TCP/IP Cache - OFF/ON
- Other Tweaks -
SIM Contacts - HIDE/SHOW
Auto-Lock - OFF/ON
SMS Threading - OFF/ON
Customer Feedback - OFF/ON
Error Reporting - OFF/ON
Right SoftKey - Comm Man, File Explorer, Default
In Call Recording - OFF/ON
SmartTouch - OFF/ON
MORE FEATURES
- Finger Scrolling !
- Big Icons/Buttons, finger friendly, no need for stylus !
- Landscape Support !
- Cool Graphics
- Most Daily Use Functions
- EASY to USE !
- Rapid menu access
- Help
- Restart Device
- Restore To Default
- .PNG Start Menu Icon
Full description HERE
The DEMO Version can be downloaded from HERE or HERE.
By buying/donate this application you will support me (BOGYSOFT) and further development.
Any posibility to have your program adapted to omnia 249x400?¿?
WAIKIKI728 said:
Any posibility to have your program adapted to omnia 249x400?¿?
Click to expand...
Click to collapse
My intention was to develop XTreme Tweaks for all resolutions, but unfortunately the satisfaction of my work didn't match the effort that i put into this application.
bogy16 said:
My intention was to develop XTreme Tweaks for all resolutions, but unfortunately the satisfaction of my work didn't match the effort that i put into this application.
Click to expand...
Click to collapse
This is so cool cant wait to try in QVGA.
Wow...looks amazing...unfortunately it is not for WQVGA(Omnia) :-(
QVGA\WQVGA Version will soon be available!
QVGA \ WQVGA Resolution Now Available!
Start Menu Columns tweak don´t work on my Gigabyte GSmart S1200 with official WM6.5 ROM :-(
nice work dude!!
ill give this a try.
can i ask, with the 3,4,5 column setting does this centre the white selection cloud over the new icon position?
thanks
MG
MysticGenius said:
nice work dude!!
ill give this a try.
can i ask, with the 3,4,5 column setting does this centre the white selection cloud over the new icon position?
thanks
MG
Click to expand...
Click to collapse
Try the demo version, if you like it you'll know what to do next.
jerrry said:
Start Menu Columns tweak don´t work on my Gigabyte GSmart S1200 with official WM6.5 ROM :-(
Click to expand...
Click to collapse
Try v1.1 RC1, if you like it you will find the final release soon on description link.
hi,
i was wondering if you can add these tweaks to your app.
once you have all of the options i want i will for sure purchase!! (where is the donate/purchase link i can make one today!!)
1: Disable the clock on the taskbar
2: Setting the text size (i use 1 up from the minimum size)
3: Disabling the keyboard sound for EZinput
4: the screen power settings for dimming when the device is connected to power and when disconnected to power.
thanks in advance
MG
MysticGenius said:
hi,
i was wondering if you can add these tweaks to your app.
once you have all of the options i want i will for sure purchase!! (where is the donate/purchase link i can make one today!!)
1: Disable the clock on the taskbar
2: Setting the text size (i use 1 up from the minimum size)
3: Disabling the keyboard sound for EZinput
4: the screen power settings for dimming when the device is connected to power and when disconnected to power.
thanks in advance
MG
Click to expand...
Click to collapse
I will consider your request in the next release.
Best regards
bogy16 said:
I will consider your request in the next release.
Best regards
Click to expand...
Click to collapse
Brilliant, please can you point me to the donate link?
thanks
MG
Hey, I have a Samsung Intrepid with WM6.5 320x240.
Installed your program, asked me for a license code after I clicked on the icon. I did not have a license code, due to only wanting to try it. So, I clicked the close button, and researched a little to why it asked that. Tried to go back by clicking the icon once again and nothing happened. Uninstalled and reinstalled it numerous times and every attempt after I click the program's icon, nothing happens.
If an update is still in the pipeline this app would be a gem. At last something finger-friendly to replace AdvancedConfig. Just waiting for the WQVGA version as well now
Hi
Nice work on getting this app together, but...
On a stock SEA 6.5 ROM on a TP2, the finger friendly thing does not work.
The stock ROM allows for Explorer to be scrolled with your finger natively, but not something like 'Notes'.
I was hoping your app would add that functionality, but it doesn't seem to.
Cheers
Jabberoo
bogy16 said:
I will consider your request in the next release.
Best regards
Click to expand...
Click to collapse
Hi,
Whens the next release? Im thinking of buying but there has been no updated for ages, and most of these things can be found in the registry.
will there be any updates or is this dead?
Thanks
MG
can you please tell me the registry value to modify to have this on?
1.SMS Sent Message - If OFF, this option will disable the SMS sent message.
and this also on?
In Call Recording - If ON, this option will allow call recording, see the option available when making a phone call. The recording will be saved in My Voices.
nic85 said:
can you please tell me the registry value to modify to have this on?
1.SMS Sent Message - If OFF, this option will disable the SMS sent message.
and this also on?
In Call Recording - If ON, this option will allow call recording, see the option available when making a phone call. The recording will be saved in My Voices.
Click to expand...
Click to collapse
I would like to know the value for SMS as well please!!!!
Changes for 1.1.1:
-Fix issues with being unable to reconnect after a disconnect -- no more needing to reboot after a disconnect
-Fix issue where the check box needed to connect to another device would not show up sometimes
-Fixed a blank toast message that was trying to report a disconnect, now shows a proper error message
-Updated boot logo to one with the teamwin text
1.1.1 is currently only being released as a patch to apply on top of an existing 1.0.0 install.
If you are already running 1.0.0, simply install the update zip. No wiping is needed for the update.
If you don't have my ROM installed right now, you will need to factory reset, install both the 1.0.0 zip followed by the 1.1.1 zip.
There is only one update zip for all models.
We need someone who has a 1GB/8GB/2100MHz model to contact us and supply a boot image from this model of device so that we can offer a properly working boot.img.
Mirror 1
Mirror 2
What this ROM does not have:
-Gestures for back and menu do not work out of he box (there's an Xposed module that you can install to enable them that is free in the Play Store or another app that does not need Xposed documented further down in this post)
-Status bar does not hide itself
-Home + Power does not take a screenshot (Xposed can add screenshot options to the power menu)
-No companion mode that lets you receive calls, texts -- use SWApp Link free in the Play Store for this
-AGPS assistance data doesn't download by default. Use GPS Status and Toolbox to download it instead. GPS is confirmed working.
-Camera is rotated 90 degrees
-If you open the camera app and press the button to use the non-existant front facing camera, the app will FC. You will have to clear app data on the camera app to use the camera again.
-Many APNs are not included. You might have to add yours manually. This is a tethering ROM, not intended to be used with a SIM card.
-Some of the numbers on the stock dialer are not accessible - may be able to fix this with xposed and change the app's dpi.
What this ROM does have that stock Omate does not:
-Fully working native Bluetooth tethering to your phone including push notifications
-Fully working settings app including the ability to delete and change account settings
-Already has EnSec and build prop tweaks
-SuperSU
This is built using some MTK 6572 source for a different device. As such some things will be a lot different and that is the reason that items like the gestures for back and menu do not work.
You do not have to start with a stock ROM. This ROM will completely replace your existing system and boot/kernel.
Download the correct zip for your device. If you don't see your model listed, contact us and DO NOT install:
Mirror 1
Mirror 2
Install TWRP if you haven't and make a backup of your existing System, Data, and Boot
Factory reset
Install zip and reboot. First boot will take longer than usual
On first boot you will see the Welcome screen. Tap in the 4 corners of the app itself (not including the status bar) in a clockwise fashion (see here).
On your phone, turn on Bluetooth, enable Bluetooth tethering, and make your phone visible for pairing
On the watch, open settings. If you don't have a SIM card in the watch, go to more and check the box for airplane mode.
Turn on Bluetooth, find and pair with your phone.
Click on the Settings icon to the right of your phone's name (this is on the watch) Tap on Internet access.
Enjoy!
You will probably want to install Xposed:
You'll probably want to download All in one gestures from the Play Store.
Open Xposed Installer in app drawer, tap on Frameworks. Tap Install/Update. Grant root rights.
Still in Xposed, hit Ok after the install is done. Press the back button (icon in the upper left will also go back). Click on Modules. Check the box for GravityBox and All in one gestures (and probably any other modules).
Still in Xposed, hit back, Frameworks. Scroll down and reboot. Click Okay.
After reboot, open app drawer and find GravityBox, scroll down to Power tweaks. Check the top box for Advanced reboot menu and the box for Screenshot.
Open the All in one gestures app. Tap on the Swipe tab. Enable it. Scroll down to Left Area and tap on it. Choose Menu. Scroll down and tap on Right Area and choose Back.
Click on the All in one gestures icon in the upper left to slide open the menu. Tap on Transparency & Color. Slide the second slider all the way to the left to get rid of the glowing icons on the left and right.
You now have screen shot capability and have restored the stock gestures.
Press and hold power. Press Reboot. Press Reboot. Press OK.
Other recommended apps:
PNF or Push Notifications Fixer - You can use this app to change the frequency that the watch pings Google. When your phone changes connections (e.g. mobile network to Wi-Fi) the framework notifies all apps including apps like Hangouts that the connection has changed so that those apps can reconnect and get push notifications. Unfortunately your phone will not tell your watch when connections change. This app will help you start getting push notifications sooner after a connection change.
GMD Gesture Control - The free version can add a back button gesture. You'll have to buy the paid version to get the menu gesture back.
If you install Xposed framework, you can install this free module called All in one gestures and tweak it to enable gestures for the back and menu buttons.
Notes:
Bluetooth tethering had to be slowed down quite a bit to prevent the driver from crashing. We've slowed it down by setting the tcp buffer sizes really low. You can change the values of net.tcp.buffersize.bt to tweak it if you like. The crash seems to be kernel level or maybe even chip / hardware level.
Bluetooth on MTK is somewhat unstable. If it disconnects due to a driver crash, you may have to reboot the device to get Bluetooth working again. With version 1.1.1, you can probably just reconnect without having to reboot.
I am very busy. I probably won't have time to provide much support for this ROM. I don't owe you anything. If you don't like this ROM, I'll refund your full purchase price of free.
Special thanks to @Lokifish Marz @AdamOutler @toastcfh and @kuronosan
Reserved
Omg! It works great!
Word up!
Sent from my Galaxy Nexus using Tapatalk 2
Awesomesauce!
Dees!!! Ur da man!
hahahahahahah
eat dat MTK!
ROFL
Exactly where do I install the zip drive and do I extract it to the same folder as bt-rom?
syounger64 said:
Exactly where do I install the zip drive and do I extract it to the same folder as bt-rom?
Click to expand...
Click to collapse
don't extract it.
move it into the watch. boot in recovery mode and install zip.
make sure you have a backup of your system if things go sour.
ALWAYS BACKUP BEFORE DOING ANYTHING!!!
Can anybody please tell me what is the bettary life if i use it moderately ?
Sent from my SM-N9005 using XDA Premium 4 mobile app
juanflight said:
don't extract it.
move it into the watch. boot in recovery mode and install zip.
make sure you have a backup of your system if things go sour.
ALWAYS BACKUP BEFORE DOING ANYTHING!!!
Click to expand...
Click to collapse
Thanks but after installing goomanager. It says denied supers request. How do I fix that? How do u boot in recovery mode if my power button isn't doing anything when I press it? When I want to back up of my system is that done via goomanager or supersu?
Sorry for all these questions as I'm not familiar with this process.
Dees_Troy said:
I don't owe you anything. If you don't like this ROM, I'll refund your full purchase price of free.
Click to expand...
Click to collapse
Haha, love it!
You are a great dev Dees. It's people like you that make this place what it is, a haven for tech lovers. Great job!
First thing I did was install myglass app and try and connect it to glass and it still crashes. Oh well hopefully we are going to get something good out of the source release. Thanks Dee's for all you do.
Sigh.... after reading this I got up to install the patch. The watch slipped off my wrist and fell on the floor. The metal clamp came off but I was able to put it back on then found out the power button wasn't working. I don't know if it was the result of the fall but while I was looking at supersu I might have hit on something and the watch rebooted then got stuck until the battery drained out. Is it possible that the power button was disabled?
WOW, so I get mt watches on a Thursday and the best ROM yet comes out on Friday? I couldn't be more excited .. Awesome!
Not that I wont be installing this , just a quick question.. @Dees_Troy what version on the standard android mail client is included in this rom? I havent been able to get my watch logged into exchange. this is a big deal for me as I need to calendar to sync my appointments. Email and contacts from exchange on my watch are not that big a deal for me but the appointments are. Thanks and looking forward to checking out your efforts..
I use gravitybox to enable the navigation bar @60% on stock rom, but can't get it enabled with this rom. is it completely pulled from the framework or is there some other trick to enable the navbar?
Installation aborted
While attempting to install this ROM, I keep receiving the 'Installation aborted' message in recovery. I'm running Loki's setup on my 1/8/1900mhz Omate. Also, when I plug my watch in to my laptop with USB debugging mode on I cannot execute any adb command prompts.
I don't know if the two are related...but I'm sure it is something I screwed up.
Any thoughts?
After install I am having apn issues. On Loki's operative I can get H+ data but only Edge with this. Any suggestions? GoPhone APN settings are correct and have also tried the Att one too.
Everything else seems great so far. Testing BT with Glass next. Will update the post afterwards.
edit#1- I can successfully pair Glass as a headset and also bluetooth tether data. MyGlass does not force close but will not connect when it sees the device.
edit#2- APN settings are borked for HSPA+....
unable to use for internet access
when i check the box to enable internet access, nothing happens.
I am using 1/8/1900 TS
Cheers! This makes some libraries like AllJoyn works!
H3ll0w0rld08 said:
when i check the box to enable internet access, nothing happens.
I am using 1/8/1900 TS
Click to expand...
Click to collapse
samething happens on mine!
Install the FIRMWARE ONLY THROUGH TWRP Recovery!
What is Cyanogenmod ?
Aftermarket firmware cell phones and tablets based on Android OS which is based on Android 4.4.4 from the team Cyanogen Team, is now Cyanogen Inc. Supported features not in the official firmware vendors of Android devices, including the original theme (also known as "T-Mobile Theme Engine"), a codec for the Free Lossless Audio Codec (FLAC), compressed cache (compcache), a large list of APN, OpenVPN-client, reboot menu.
What works?
-Wi-fi and Wi-fi access point
-Bluetooth
-GPS
Sensors
Network
-Send SMS (there is a choice in the settings)
-Photo camera and video recording with rear camera and front camera
-Backlight of touch
Screen
-Touch screen
-Mobile data
-ROOT
-Incoming and outgoing calls
-Record from line
-INTERNAL AND EXTERNAL SD CARD
System is patched against vulnerabilities in MMS
Bugs present in the firmware
- Not working FM radio (Cyanogenmod does not work any more with MSM7X27A)
Tips that will help you to use this firmware
1.After installing the firmware, and run the included SIM card: SIM card--->operators--->Move two switches...Network activated
2.Ringtone on SIM 2 Call settings-Settings SIM
3.How to reduce battery consumption?
Go to Settings => Privacy => Protected mode.
In the list, tap the three dots at the top right and select "System apps".
Then look for the ill-fated "Google Play Services" and click on them and hold opens a menu with restrictions.
Prohibited "Location", "Withdrawal from sleep" and "Active mode".
Looking for the ill-fated "Google Play" and press on them and hold opens a menu with restrictions.
"The conclusion of the sleep mode and Active mode.
Then be sure to restart the system!
4.How to enable transparent status bar?
You need to go to Settings ==> Performance ==> enable "High graphics" => Overloaded. To open them, tap 5 times on build number.
5.Mode MTR
6.How to enable vibration + ring?
Creates a tile sound settings the "sound" in the tiles to select all available modes and after click on a tile. (Notification bar->quick settings--->Tiles and placement--->click add ,Select tile sound ,press the back button--->sound Modes--->check boxes of all the available modes and press "OK"---> Pull the curtain down,we see the tiles sound,tap on it and once under your finger will feel the vibration you have achieved your goal (How to enable vibration + ring
7.How to set to use only 3G mode?
Open dialer, dial *#*#4636#*#*
8.Before recording a video change the quality to 480p
Screenshots in private message
****...
aw, i think nobody would pay for you..,
Don't have much money!
I will pay you if everything work without an errors!
I will pay u only if anyone of our devoloper certified this rom stable and bug free
code27011999 said:
I will pay you if everything work without an errors!
Click to expand...
Click to collapse
Just fixed the excessive battery consumption + offline charger. No error is observed
Please release it for free
I want to play pokemon go
on android 4.1.2 does not work
Dude please release it for free .I am literally begging for you .this phone needs cm 11 but I have money problem
IceNeko said:
Just fixed the excessive battery consumption + offline charger. No error is observed
Click to expand...
Click to collapse
Xda is not a place to make money, you can not sell your rom here
Thread Closed
Moderation Team