Help to root Sony xperia Z2 - Xperia Z2 Q&A, Help & Troubleshooting

I recently updated my z2 through my pc (ota update) to lollipop ? and now i want to root my phone..
Can anyone tell me the easy and successful process to root it..

Anyone..?

First off, download and install Flashtool from HERE , install the software and then go to drivers folder, or just copy and past this link in your Computer address bar C:\Flashtool\drivers\Flashtool-drivers.exe
check these boxes |Flashmode drivers|Fastboot drivers| Xperia Z2 device drivers and press next to install them, better restart your computer afterwards. After doing these steps reply to me and I'm gonna tell you what next

iamsameer said:
Click to expand...
Click to collapse
Did you do the things I told you in the previous post, as this is the only way I can help you because you seem to be lost, just follow my previous post and I'm gonna tell you what next to do

Related

[Q] Need help rooting xperia x10

I just bought an sony xperia x10 and i am new to moddig and flashing i had an htc hero and i rooted it and everything with no problem now i want to go from 1.6 to 2.1 on my experia x10 can comeone please help!!!!
waymon31 said:
I just bought an sony xperia x10 and i am new to moddig and flashing i had an htc hero and i rooted it and everything with no problem now i want to go from 1.6 to 2.1 on my experia x10 can comeone please help!!!!
Click to expand...
Click to collapse
This is the Easy stuff, you dont need root to go from 1.6 to 2.1
First go to the Sony Ericsson website and download two programs called Pc companion and Sony Ericsson Update Service (SEUS), located in support for X10
Then just install those two and follow instructions, you should now already installed the drivers for your x10 by going into flash mode
Now your Pc companion will alert you that there is an update for the x10. Click on that and just follow every step.
To Get 2.2 and over:
1) need to root - download either flashtool from Q&A thread or you can download SuperOneClick
2) Use either to root device - once rooted, reboot phone
3) Download busybox from the market and install
4) Once installed, your device is basically rooted and has xrecovery installed
5) you can reboot into xrecovery by tapping the back button several times when the sony ericsson logo has appeared
6) just install any of these custom roms available on this site and PLEASE READ THE INSTRUCTIONS FOR EACH ROM
7) you may have to flash different basebands for different roms- i will not explain every single step because you can find out by searching and reading these forums
8) just install any rom and reboot DONE!!!
thanks for the help im just stuck on 1 little step i cant seem to get the semc driver installed. any suggestions im using windows vista
waymon31 said:
thanks for the help im just stuck on 1 little step i cant seem to get the semc driver installed. any suggestions im using windows vista
Click to expand...
Click to collapse
It should just try to autoinstall when you plug your phone into usb and connect the first time if your on stock ROM.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
hey if you cant get the computer to read it, turn off your phone, unplug usb from phone, hold the BACK button WHILE plugging the usb into your computer. Keep hold of the back button until the computer has recognised it
xperiax10mods said:
This is the Easy stuff, you dont need root to go from 1.6 to 2.1
First go to the Sony Ericsson website and download two programs called Pc companion and Sony Ericsson Update Service (SEUS), located in support for X10
Then just install those two and follow instructions, you should now already installed the drivers for your x10 by going into flash mode
Now your Pc companion will alert you that there is an update for the x10. Click on that and just follow every step.
To Get 2.2 and over:
1) need to root - download either flashtool from Q&A thread or you can download SuperOneClick
2) Use either to root device - once rooted, reboot phone
3) Download busybox from the market and install
4) Once installed, your device is basically rooted and has xrecovery installed
5) you can reboot into xrecovery by tapping the back button several times when the sony ericsson logo has appeared
6) just install any of these custom roms available on this site and PLEASE READ THE INSTRUCTIONS FOR EACH ROM
7) you may have to flash different basebands for different roms- i will not explain every single step because you can find out by searching and reading these forums
8) just install any rom and reboot DONE!!!
Click to expand...
Click to collapse
thanks for your easy to follow tutorial it worked like a charm!!!!! i am so happy with my new phone its runs very fast!!!!!!!!!!!!!!!!! the pic quility is fantastic!!!!!!! thank again

[tut] flashing the bricked or dead x10 mini with the stock firmware

hi guys dis s d tutorial for flashing d stock firmware on a dead or bricked x10 mini.....
NOTE: THIS PROCESS WILL RELOCK UR BOOTLOADER AND ROOT WILL BE GONE
Step 1: Download Sony Ericsson update service software (SEUS) http://www.sonyericsson.com/cws/supp...ro?cc=gb&lc=en
Step 2: Install it and open it
Step 3: Now do a hot reboot on the device by pressing and holding both the menu and power keys at the same time
Step 4: Without wasting even a single second press and hold the back button and connect your USB cable while holding Back
Step 5: Do not release the back key until the SEUS identifies your device. When it identifies your device, the update option will appear on your screen.
(It may say that you have a latest firmware already, but you click repair anyway and after the operation starts, You may release your back key.
Step 6: Wait until the update process gets finished and reboot your device now you will have a stock firmware with locked bootloader
feel free to hit thanks if this helped you..
kudo for posting this, but many spelling mistakes and excessive use of txt speak like "ur, u, diz" you may wanna rewrite the post
---------- Post added at 10:14 AM ---------- Previous post was at 09:17 AM ----------
Step 1: Download Sony Ericsson update service software (SEUS) http://www.sonyericsson.com/cws/sup...ject/pccompanion/xperiax10minipro?cc=gb&lc=en
Step 2: Install it and open it
Step 3: Now do a hot reboot on the device by pressing and holding both the menu and power keys at the same time
Step 4: Without wasting even a single second press and hold the back button and connect your USB cable while holding Back
Step 5: Do not release the back key until the SEUS identifies your device. When it identifies your device, the update option will appear on your screen.
(It may say that you have a latest firmware already, but you click repair anyway and after the operation starts, You may release your back key.
Step 6: Wait until the update process gets finished and reboot your device now you will have a stock firmware with locked bootloader
Hopefully, this will be easier to understand (spelling, grammer & punctuation fixed)
thanx for the opinion will repost it soon
You are wrong, restore a firmware does not restore the lock of the bootloader. Your bootloader keeps unlocked always (you need s1tool to relock)
Sent from e10a using xda premium
if the phone is bricked... will the above steps work..??
i want to flash my stock kernel with nAa kernel and install MiniCM7..
Please someone reply... thanks in advance..
karthiks.840 said:
if the phone is bricked... will the above steps work..??
i want to flash my stock kernel with nAa kernel and install MiniCM7..
Please someone reply... thanks in advance..
Click to expand...
Click to collapse
any one will answer this question ??
matthias1203 said:
any one will answer this question ??
Click to expand...
Click to collapse
The phone at least has to be able to boot in flash mode. If it's "more bricked than that" it shouldn't work...
Missing "REPAIR" option in SE Update Service
SE Update Service ver.: 2.12.5.57 (last)
Kernel: nAa kernel
ROM: MiniCM7
There is no "REPAIR" option (see attachment).
It was in older version only? Who knows?
Or does anyone know another way to get back to stock ROM and kernel from the kernel and naa MiniCM7 ROM?
I claim my phone. So I need the original state.
THNX a LOT!
The repair option in PC Companion is a bit hidden, mine is in dutch but i try to show you the steps you have to take.
See screenshot 1, support zone, click start
See screenshot 2, update phone software, click start
See screenshot 3, phone not found (or you have the latest firmware), click the repair link
The repair link is not there if you choose update from the mainscreen in SEUS.
This desnt work. I have got almost standard conditions
SmG67 said:
The repair option in SEUS is a bit hidden, mine is in dutch but i try to show you the steps you have to take.
See screenshot 1, support zone, click start
See screenshot 2, update phone software, click start
See screenshot 3, phone not found (or you have the latest firmware), click the repair link
.
Click to expand...
Click to collapse
Your screenshots are from Sony PC Companion
But there is talk about Sony Ericsson update service software (SEUS)
showstopper1 said:
Step 1: Download Sony Ericsson update service software (SEUS) http://www.sonyericsson.com/cws/supp...ro?cc=gb&lc=en
Step 2: Install it and open it
Click to expand...
Click to collapse
Nevertheless I try your way. I found "Repair" link. I walk thru all steps, but It shows "No software available" (it was looking more like "update" then "repair") (see attachment). And then redirect me to homepage of PC Companion (with no chance to Repair).
I have got standard conditions:
Sony XPERIA X10 mini (E10i)
with
Kernel: nAa kernel (last version)
ROM: MiniCM7 (last version)
PC Companion Version: 2.10.053 (last)
SE Update Service (SEUS) Version: 2.11.12.5 (last)
THIS SOLUTION STILL DOESNT WORK FOR ME (I THINK FOR ANYBODY WITH SAME CONDITIONS)
Please help. I'm starting to be clueless :/
Thanx a lot.
I have edited my post, it is PC Companion ofcourse...
What steps did the repair option make you take? with me it is:
1. you will lose all your data, agree...
2. computer will be prepared, choose your model - x10 mini
3. it will tell you how to enter flash-mode (unplug, shut down, press back, plug in)
4. it will download the firmware and flash it to the phone
5. disconnect the phone and restart
as far as i know, the repair option doesn't care what phone you have, or what software it runs, it trusts you to select the right model, and itself to find the right firmware for that, no other checks are performed, it just flashes it.
PS: I was on nAa-08 and GingerDX this time, especially for this post i have flashed back to stock. i have bricked my phone a few times when i tried flashing custom roms and it always worked this way for me, even if you are on stock firmware it will still flash it again.
is it possible that my mobile SIM is not recognized after bootloader relock in s1tool?
niksa09 said:
is it possible that my mobile SIM is not recognized after bootloader relock in s1tool?
Click to expand...
Click to collapse
If it was still working after you unlocked the bootloader, then relocking it probably won't break it.
If it stopped working after you unlocked the bootloader, then relocking might restore it.
In any case make sure you're on stock firmware before you relock.
guys i have a bricked mini with stocked firmware i connect it with seus and it says that i have the latest firmware but it doesnt appear the repair button ! Whats can i do /
marios199546 said:
guys i have a bricked mini with stocked firmware i connect it with seus and it says that i have the latest firmware but it doesnt appear the repair button ! Whats can i do /
Click to expand...
Click to collapse
leave your phone unplugged when you choose update, and only plug it in when it asks to connect in flashmode. It can't recognise your phone when it's unplugged and should give you the repair option, if SEUS doesn't do that, download PC Companion, that will do it.
but the pc companion need the phone to be turned on and my phone doesnt turn on
---------- Post added at 10:35 AM ---------- Previous post was at 10:32 AM ----------
i follow your instructions and again nothing
marios199546 said:
but the pc companion need the phone to be turned on and my phone doesnt turn on
---------- Post added at 10:35 AM ---------- Previous post was at 10:32 AM ----------
i follow your instructions and again nothing
Click to expand...
Click to collapse
So, what is wrong with your phone then? is your battery dead?
When you start PC Companion and you don't have your phone plugged in, you do the following:
Choose update
It will say: Phone not recognised (or something like that) and in that dialog there is a little blue link saying Repair. Click on it.
It will tell you you will lose all user data, accept that
It will ask you to select your phone-model from a list
It will download the firmware for that phone.
It will ask you to connect your phone in flash-mode (press the back-button, plug in the usb-cable, the led will turn green, the dialog will disappear and it will start flashing.
No need to turn on your phone at all, but it needs some charge in the battery in order to successfully complete the flash (normally a charge of over 50% is recommended to be safe)
please help me find goog firmware for my xperia mini (e10i)
my xperia mini bricked after i tried to flash firmware but it still boot to flashmode. please help me find a better firmware to restore my phone!

sola fastboot error

I m using xperia sola of FW 6.1.1.B.1.54. Due to bad performance ics in sola I decided to root sola and instal custom rom. First I tried binary recvr methode without unlocking BOOTLOADER.but. I failed bcuz FW. 54 cant follow this methode.to install custom rom one of xda memyber told me I need a unlocked BOOTLOADER.i read. Unlocking tutorial and downloaded flsh tool,fastbootzip evrything.As the fist instruction I connected sola in fastbootmode for install drivers by holding vol up button I cnnctd, a purple led appears and a bloom Sound from windows.suddenly purple changes to orange and no more messages on Windows!! I checked my device manager but thre is no name like "android" (i found a name "android " in device manager list in a video tutorial).I again checked driver installed in flash tool. Everything is okay. I connected again but same result!. I moved to next step, on cmnd box I entered the first keyword and a message came on cmd box 'waiting for device ' ...!!! Wat I do? please friends please help me. Whats the problem ?
Don't Worry!
thejaswynd said:
I m using xperia sola of FW 6.1.1.B.1.54. Due to bad performance ics in sola I decided to root sola and instal custom rom. First I tried binary recvr methode without unlocking BOOTLOADER.but. I failed bcuz FW. 54 cant follow this methode.to install custom rom one of xda memyber told me I need a unlocked BOOTLOADER.i read. Unlocking tutorial and downloaded flsh tool,fastbootzip evrything.As the fist instruction I connected sola in fastbootmode for install drivers by holding vol up button I cnnctd, a purple led appears and a bloom Sound from windows.suddenly purple changes to orange and no more messages on Windows!! I checked my device manager but thre is no name like "android" (i found a name "android " in device manager list in a video tutorial).I again checked driver installed in flash tool. Everything is okay. I connected again but same result!. I moved to next step, on cmnd box I entered the first keyword and a message came on cmd box 'waiting for device ' ...!!! Wat I do? please friends please help me. Whats the problem ?
Click to expand...
Click to collapse
Just download and install ADB in your PC and update your drivers in ADB
http://developer.android.com/tools/help/adb.html
This should solve it.
Make sure Tethering is ON in settings> Development
And a short cut is install Sony PC Companion and it will also install drivers for your phone!
This should work !
Good Luck
---------- Post added at 11:40 PM ---------- Previous post was at 11:36 PM ----------
thejaswynd said:
I m using xperia sola of FW 6.1.1.B.1.54. Due to bad performance ics in sola I decided to root sola and instal custom rom. First I tried binary recvr methode without unlocking BOOTLOADER.but. I failed bcuz FW. 54 cant follow this methode.to install custom rom one of xda memyber told me I need a unlocked BOOTLOADER.i read. Unlocking tutorial and downloaded flsh tool,fastbootzip evrything.As the fist instruction I connected sola in fastbootmode for install drivers by holding vol up button I cnnctd, a purple led appears and a bloom Sound from windows.suddenly purple changes to orange and no more messages on Windows!! I checked my device manager but thre is no name like "android" (i found a name "android " in device manager list in a video tutorial).I again checked driver installed in flash tool. Everything is okay. I connected again but same result!. I moved to next step, on cmnd box I entered the first keyword and a message came on cmd box 'waiting for device ' ...!!! Wat I do? please friends please help me. Whats the problem ?
Click to expand...
Click to collapse
Download Site
http://developer.android.com/sdk/index.html
Hnk1 said:
Just download and install ADB in your PC and update your drivers in ADB
http://developer.android.com/tools/help/adb.html
This should solve it.
Make sure Tethering is ON in settings> Development
And a short cut is install Sony PC Companion and it will also install drivers for your phone!
This should work !
Good Luck
---------- Post added at 11:40 PM ---------- Previous post was at 11:36 PM ----------
Download Site
http://developer.android.com/sdk/index.html
Click to expand...
Click to collapse
But I already installed PC combanion!.
thejaswynd said:
But I already installed PC combanion!.
Click to expand...
Click to collapse
Then you will need to make sure that PC companion isnot working in the background. You can check it in the taskbar.
Plus install the SDK with its driver if that doesnot work.
Make sure you are running as Administrator.
Hnk1 said:
Then you will need to make sure that PC companion isnot working in the background. You can check it in the taskbar.
Plus install the SDK with its driver if that doesnot work.
Make sure you are running as Administrator.
Click to expand...
Click to collapse
I am going to downlad sdk. but did there ia any other methode to unlock?
thejaswynd said:
But I already installed PC combanion!.
Click to expand...
Click to collapse
thejaswynd said:
I am going to downlad sdk. but did there ia any other methode to unlock?
Click to expand...
Click to collapse
To unlock your bootloader you will need to get that from SONY website only
I mean, SONY will send you a code and then you can unlock your bootloader.
I will send you the link.
OFFICIAL SONY
http://unlockbootloader.sonymobile.com/instructions
YOUTUBE TUTORIAL
http://www.youtube.com/watch?v=4o-wf7lId1M
Flash tool is used for STOCK rom installation and some custom roms support locked bootloader.
however, I used sony official website to unlock my bootloader
Hnk1 said:
To unlock your bootloader you will need to get that from SONY website only
I mean, SONY will send you a code and then you can unlock your bootloader.
I will send you the link.
OFFICIAL SONY
http://unlockbootloader.sonymobile.com/instructions
YOUTUBE TUTORIAL
http://www.youtube.com/watch?v=4o-wf7lId1M
Flash tool is used for STOCK rom installation and some custom roms support locked bootloader.
however, I used sony official website to unlock my bootloader
Click to expand...
Click to collapse
I downloaded the sdk (only sdk.zip about 105 MB not whole boundle! is that enough?)but it installs nothing!. again I checked my device manager (screenshot added)the android is still giving warning.how can I fix this? .after I opened flashtool and simply started flashing but an error massage came "error driver need to. be installed. now one thing I confirmed that I need to install driver!!!! but how?
thejaswynd said:
I downloaded the sdk (only sdk.zip about 105 MB not whole boundle! is that enough?)but it installs nothing!. again I checked my device manager (screenshot added)the android is still giving warning.how can I fix this? .after I opened flashtool and simply started flashing but an error massage came "error driver need to. be installed. now one thing I confirmed that I need to install driver!!!! but how?
Click to expand...
Click to collapse
The SDK i am using is about 420 MB in zip file and goes over 850 MB. So we are using different versions.
Secondly, When you open ADB, it asks you to update tools. There must be UPDATE DRIVERS. Install that and it should work. Make sure you run as administrator. I havenot seen any attachment with your post!
I downloaded it from here. 32 bit . Use according to your motherboard.
http://developer.android.com/sdk/index.html
Also, to flash your rom, you must have FTF file of STOCK. And your Sony PC companion shouldnot be running in the background.
I am attaching a file. You can easily tick the drivers you need to install as seen in the image.
You do not need to unlock your bootloader to flash STOCK rom, however, to install most of custom roms, You will need to unlock the bootloader.
More details here :
http://forum.xda-developers.com/showthread.php?t=2313638
thejaswynd said:
I downloaded the sdk (only sdk.zip about 105 MB not whole boundle! is that enough?)but it installs nothing!. again I checked my device manager (screenshot added)the android is still giving warning.how can I fix this? .after I opened flashtool and simply started flashing but an error massage came "error driver need to. be installed. now one thing I confirmed that I need to install driver!!!! but how?
Click to expand...
Click to collapse
I saw your attached thumbnail now.
Well you can not install it from there.
Download SDK and then in that list of things to be installed, INSTALL USB DRIVERS.
Good luck
OP, just read this.
I don't know why you guys make things difficult, he doesn't have to install SDK.
Just follow this tutorial...
http://androidlegend.com/how-to-unlock-bootloader-of-sony-xperia-u-st25i/
I know is for Xperia U but works on Sola too.
Sent from my MT27i using xda premium
---------- Post added at 06:34 PM ---------- Previous post was at 06:30 PM ----------
After that root by Binary's method and flash the ROM, any question, feel free to ask.
Sent from my MT27i using xda premium

[Q] xperia mini st15i Keep on restarting

hello everyone,
i know that this have been probably covered, im searching for days, but i cant find any, it probably buried somewhere. i apologized to the admin, but i really want to solve this problem, i really really need my phone. tnx for your consideration
first thing first, i want you to know that I'm a noob in rooting and its my first post. my phone is sonyericsson xperia mini st15i with IMEI:0Mod Edit: please don't give out your IMEI number on a public forum) and im from philippines using Smart as my service provider, it is a prepaid account.
i followed this steps using instruction from this site "http://xperiahtcrootingrom.com/how-to-root-xperia-mini-st15i-sony/"
I think i brick my xperia mini, it keeps on restartting over and over again, heres the story,
*first i performed the downgrade to Xperia Mini (ST15i)_4.0.2.A.0.42_CE.ftf gingerbread using guide from "http://xperiahtcrootingrom.com/how-to-root-xperia-mini-st15i-sony/", and it worked and i was able to root it.
*second i performed step 3 of the said guide up to step where you execute “01-local-prop” , then i realized the the firmware i got “4.0.4 firmware” is not appearing in my choices, so i figure its not the right rom, i unplug the usb and restart the phone, then the problem starts, it keeps on restarting over and over, i tried to flash it again to Xperia Mini (ST15i)_4.0.2.A.0.42_CE.ftf but it doesnt work because it keeps on restarting, pls help, it my first time doing root, i know it’s a learning process, i hope you can help me. tnx very much. hope to hear from you soon.
i know that there are same problems with other devices, ive tried to search for it, it does have the same problems but its a different handset, i believed that there are different ways to root for every handset. tnx again, i hope to hear from you guys soon.
Were you able to flash again the Rom or not?
It should be a soft brick so if you'll install again the Rom you should be fine...
Sent from my LT22i using xda app-developers app
Ste91 said:
Were you able to flash again the Rom or not?
It should be a soft brick so if you'll install again the Rom you should be fine...
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
i wasnt able to flash it, because after the sony ericsson logo appears it restart again and again, could you tell me if there's other way todo it, maybe im doing something wrong.
norman.cricket23 said:
i wasnt able to flash it, because after the sony ericsson logo appears it restart again and again, could you tell me if there's other way todo it, maybe im doing something wrong.
Click to expand...
Click to collapse
thank you very much for the quick reply, hope you can help me.
norman.cricket23 said:
i wasnt able to flash it, because after the sony ericsson logo appears it restart again and again, could you tell me if there's other way todo it, maybe im doing something wrong.
Click to expand...
Click to collapse
Follow again the Step 1 of the guide you used (except the isntallation of the program which you already have made) and you should be good to go, with a GB rom, but good to go
Let me know if all goes trough!
Ste91 said:
Follow again the Step 1 of the guide you used (except the isntallation of the program which you already have made) and you should be good to go, with a GB rom, but good to go
Let me know if all goes trough!
Click to expand...
Click to collapse
Thank you very much, thats what im doing over and over again, it doesnt work because it always restart automaticaly after the sony logo appears, can you help me sir step by step, coz in a newbie in rooting. tnx. hope you can help me.
norman.cricket23 said:
Thank you very much, thats what im doing over and over again, it doesnt work because it always restart automaticaly after the sony logo appears, can you help me sir step by step, coz in a newbie in rooting. tnx. hope you can help me.
Click to expand...
Click to collapse
Make sure your phone has a good % of battery left
1) Power off the phone.
2) Start flashtool
3) Click on the Lighting Symbol and Select Flashmode and click OK.
4) Select Appropriate Firmware and Tick Wipe User Data and Wipe Cache check box if visible and click OK. If visible click even exclude TA
PS: The appropriate firmware is a stock firmware for your device. For example the GB rom you downloaded for the downgrade and already placed in the flashtool/firmwares folder
5) click ok and follow the on-screen indications
6) when it asks to plug your device in flashmode, plug the cable in the mobile keeping the Volume DOWN button pushed down.
7) follow the on-screen indications
Ste91 said:
Make sure your phone has a good % of battery left
1) Power off the phone.
2) Start flashtool
3) Click on the Lighting Symbol and Select Flashmode and click OK.
4) Select Appropriate Firmware and Tick Wipe User Data and Wipe Cache check box if visible and click OK. If visible click even exclude TA
PS: The appropriate firmware is a stock firmware for your device. For example the GB rom you downloaded for the downgrade and already placed in the flashtool/firmwares folder
5) click ok and follow the on-screen indications
6) when it asks to plug your device in flashmode, plug the cable in the mobile keeping the Volume DOWN button pushed down.
7) follow the on-screen indications
Click to expand...
Click to collapse
Wooohooo!!! tnx sir, you are heaven sent, my phone is working now, i wanna learn more so o could help someone, just like what you did to me, tnx a lot sir ste9. :cyclops:
No need for calling me sir, and you're welcome
Sent from my Xperia P using xda app-developers app
Ste91 said:
No need for calling me sir, and you're welcome
Sent from my Xperia P using xda app-developers app
Click to expand...
Click to collapse
thank you again, til nxt time.
ST15i restarted again and again
Ste91 said:
Make sure your phone has a good % of battery left
1) Power off the phone.
2) Start flashtool
3) Click on the Lighting Symbol and Select Flashmode and click OK.
4) Select Appropriate Firmware and Tick Wipe User Data and Wipe Cache check box if visible and click OK. If visible click even exclude TA
PS: The appropriate firmware is a stock firmware for your device. For example the GB rom you downloaded for the downgrade and already placed in the flashtool/firmwares folder
5) click ok and follow the on-screen indications
6) when it asks to plug your device in flashmode, plug the cable in the mobile keeping the Volume DOWN button pushed down.
7) follow the on-screen indications
Click to expand...
Click to collapse
hai.
im using st15i and its run icecream sandwich 4.0.4.
after i finished a call my phone keep on restarting again and again..
i have try these method using flashtools version 0.9.11.0
after plug in the cable n keeping the volume down button the flashtools says that
12/015/2013 18:15:08 - ERROR - Error flashing. Aborted
12/015/2013 18:15:08 - ERROR - Drivers need to be installed for connected device.
12/015/2013 18:15:08 - ERROR - You can find them in the drivers folder of Flashtool.
please help...
NazieRoslan said:
hai.
im using st15i and its run icecream sandwich 4.0.4.
after i finished a call my phone keep on restarting again and again..
i have try these method using flashtools version 0.9.11.0
after plug in the cable n keeping the volume down button the flashtools says that
12/015/2013 18:15:08 - ERROR - Error flashing. Aborted
12/015/2013 18:15:08 - ERROR - Drivers need to be installed for connected device.
12/015/2013 18:15:08 - ERROR - You can find them in the drivers folder of Flashtool.
please help...
Click to expand...
Click to collapse
Install all the drivers for all modes/devices from the flashtool installation folder - drivers. Then try it again
Sent from my Nexus 4 running Android 4.3
norman.cricket23 said:
hello everyone,
i know that this have been probably covered, im searching for days, but i cant find any, it probably buried somewhere. i apologized to the admin, but i really want to solve this problem, i really really need my phone. tnx for your consideration
first thing first, i want you to know that I'm a noob in rooting and its my first post. my phone is sonyericsson xperia mini st15i with IMEI:0Mod Edit: please don't give out your IMEI number on a public forum) and im from philippines using Smart as my service provider, it is a prepaid account.
i followed this steps using instruction from this site "http://xperiahtcrootingrom.com/how-to-root-xperia-mini-st15i-sony/"
I think i brick my xperia mini, it keeps on restartting over and over again, heres the story,
*first i performed the downgrade to Xperia Mini (ST15i)_4.0.2.A.0.42_CE.ftf gingerbread using guide from "http://xperiahtcrootingrom.com/how-to-root-xperia-mini-st15i-sony/", and it worked and i was able to root it.
*second i performed step 3 of the said guide up to step where you execute “01-local-prop” , then i realized the the firmware i got “4.0.4 firmware” is not appearing in my choices, so i figure its not the right rom, i unplug the usb and restart the phone, then the problem starts, it keeps on restarting over and over, i tried to flash it again to Xperia Mini (ST15i)_4.0.2.A.0.42_CE.ftf but it doesnt work because it keeps on restarting, pls help, it my first time doing root, i know it’s a learning process, i hope you can help me. tnx very much. hope to hear from you soon.
i know that there are same problems with other devices, ive tried to search for it, it does have the same problems but its a different handset, i believed that there are different ways to root for every handset. tnx again, i hope to hear from you guys soon.
Click to expand...
Click to collapse
Well if you again come across the bootloop problem you can check xda university for all around solution "http://xda-university.com/as-a-user/how-to-recover-from-a-bootloop"
And if you are still looking for a way to root your st15i, you can use this easy one click root software, i personally tried it and it works "http://forum.xda-developers.com/showthread.php?t=2219781"

[Q] Bricked Xperia x10i on stock 2.3

Hello everyone.. i was trying to root my x10 with flashtool, after downgrading the kernel, i closed the flastool window. and now my x10 is now stuck in flash mode, when i press the power button it vibrates,the screen stay black and a green ligt flashes. when i try to install the stock 2.3GB i get this error saying: SIN header verfication failed.:crying: I desperately need your help
Emry said:
Hello everyone.. i was trying to root my x10 with flashtool, after downgrading the kernel, i closed the flastool window. and now my x10 is now stuck in flash mode, when i press the power button it vibrates,the screen stay black and a green ligt flashes. when i try to install the stock 2.3GB i get this error saying: SIN header verfication failed.:crying: I desperately need your help
Click to expand...
Click to collapse
Don't worry. You can resolve this. I think your bootloader is still locked. Download sony Ericsson update service tool. I mean SEUS. You must have high speed Internet connection. Switch off your phone. Open Seus service choose your device and go for update. It will ask you to connect your device by pressing back key. Just follow it. It may show that your device already have largest version. But you should continue to fresh installation. It will get your phone back to working condition. :good::good:
---------- Post added at 05:33 PM ---------- Previous post was at 05:30 PM ----------
vipsy6 said:
Don't worry. You can resolve this. I think your bootloader is still locked. Download sony Ericsson update service tool. I mean SEUS. You must have high speed Internet connection. Switch off your phone. Open Seus service choose your device and go for update. It will ask you to connect your device by pressing back key. Just follow it. It may show that your device already have largest version. But you should continue to fresh installation. It will get your phone back to working condition. :good::good:
Click to expand...
Click to collapse
Sorry latest nt largest.
gooood
vipsy6 said:
Don't worry. You can resolve this. I think your bootloader is still locked. Download sony Ericsson update service tool. I mean SEUS. You must have high speed Internet connection. Switch off your phone. Open Seus service choose your device and go for update. It will ask you to connect your device by pressing back key. Just follow it. It may show that your device already have largest version. But you should continue to fresh installation. It will get your phone back to working condition. :good::good:
---------- Post added at 05:33 PM ---------- Previous post was at 05:30 PM ----------
Sorry latest nt largest.
Click to expand...
Click to collapse
OMG thank you so much, now there is hope!i''ll be more patient this time,my internet speed is slow like a snail ,. i guess. SEUS is my only hope, thnx i'll try it
Emry said:
OMG thank you so much, now there is hope!i''ll be more patient this time,my internet speed is slow like a snail ,. i guess. SEUS is my only hope, thnx i'll try it
Click to expand...
Click to collapse
Please make sure you have a high speed internet connection. It will download your device's whole OS. I think around about 250 MB or more. Otherwise you will get frustrated in a waiting mode.
vipsy6 said:
Please make sure you have a high speed internet connection. It will download your device's whole OS. I think around about 250 MB or more. Otherwise you will get frustrated in a waiting mode.
Click to expand...
Click to collapse
Gr8!! :good: i know where i can find a high speed internet connection,. by the way i think the usb debugging mode is not activated,. will it still install the OS??
Emry said:
Gr8!! :good: i know where i can find a high speed internet connection,. by the way i think the usb debugging mode is not activated,. will it still install the OS??
Click to expand...
Click to collapse
No need to have USB Debugging.
vipsy6 said:
No need to have USB Debugging.
Click to expand...
Click to collapse
Aargh,. i'm having troubles with SEUS it is showing me an error while searching for it's update : '' Unexpected error has occurred! '' i cant use it..
Emry said:
Aargh,. i'm having troubles with SEUS it is showing me an error while searching for it's update : '' Unexpected error has occurred! '' i cant use it..
Click to expand...
Click to collapse
I have used SEUS almost 4 times, I didn't faced any issue. Make sure your Internet connection is working properly and OS too. Can you please provide snap for the same ?
SEUS has been discontinued by Sony. It doesn't work any more.
You'll have to use PC Companion.
aww!!ok, i tried with pc companion bt it says that there is no software update for my phone :'( !! is there any way to force it install the stock 2.3GB ,.. with flashtool or pc companion??
I told you already it will show that your phone already have latest software, but even though you have to go for fresh installation. So it will install fresh of GB
Sent from My Xperia Neo V MT11i
sorry 4 late replying,. thanks but sony doesn't tell that my has the latest OS version. it just says : Problem
There is no software available for your device.
there is no continue button,. there is an ok button only to close the window. i took a screenshot of pc companion while doing this,. but i can't attach a picture sorry.
Emry said:
sorry 4 late replying,. thanks but sony doesn't tell that my has the latest OS version. it just says : Problem
There is no software available for your device.
there is no continue button,. there is an ok button only to close the window. i took a screenshot of pc companion while doing this,. but i can't attach a picture sorry.
Click to expand...
Click to collapse
here is the picture

Categories

Resources