Hello guys
Is there any method to root this model? I've try all Samsung Galaxy Ace 4 Sm-g313 (all versions) but nothing works and bricked it few times.
I hope you can give a answer. Please help me.
Thanks in advance
Nothing?
More than 300 views and nobody can give me an answer?
I have the same problem...
I can try to root my celphone without pc with the differents apk's and any have the solution...
PLEASEEEE, WE NEED HELP !!!
I have the same problem. Hope anyone could help us.
Thanks.
Hello,
I have a samsung galaxy ace 4 SM-g316HU/DS, I flashed a custom boot.img with ro.secure=0 and ro.adb.secure=0, and the phone booted up; however whenever I adb shell to the device it doesn't show that I have root access... This is confusing because when I look at the properties through adb it shows that ro.secure and ro.adb.secure are both set to 0.
Any ideas?
tried everything...
I have literally tried every public method to root the g316... nothing has worked. iRoot failed, kingo, all the one click root methods failed... I created a custom boot img with ro.secure 0, adb secure 0, debuggable 1, but it seems the g316 doesn't respond to the ro secure property.
last resort is to customize system.img but i cant even seem to do that as i dont have the tools to do so on windows...
if anyone can help i would really appreciate it
How to root http://forum.xda-developers.com/ace-4/general/root-sm-g316ml-samsung-galaxy-ace-4-neo-t3180333
avelosoi said:
How to root http://forum.xda-developers.com/ace-4/general/root-sm-g316ml-samsung-galaxy-ace-4-neo-t3180333
Click to expand...
Click to collapse
Thanks, but I still have problems. When I start the rooting, everything goes fine 'till 100%, but when the phone reboots and enters Download Mode, the software gets stuck in 40% and doesn't go farther from there. I left my phone plugged all night and it didn't get past 40%. My phone, the Galaxy Ace 4 Neo, is in USB Debugging mode and all, but it can't be rooted.
Any clue?
Related
Hello! I'm new here and I searched for a similar thread but I didn't find one so don't sweat me with the search posts and read the whole post before commenting...
So, I tried to root Galaxy 5 (GT-I5500) which runs Android 2.2 and it just looks impossible. Programs I tried to use are Super One Click, z4root and Universal Androot.
Problem with SOC is that it stops responding after 2 messages appear:
Killing ADB Server...
Starting ADB Server... daemon not running. Starting it on port 5
After this it stops working... (Have the drivers for the phone and ADB stuff installed!)
The problem with z4root is that after "Acquiring root shell" my phone vibrates and just kicks me out from the program with no messages/warnings.
Universal Androot (1.6.2 b5) Says it's unable to root and that's it.
It seems that this phone has some kind of protection because I saw many other people unlocking this phone with all 3 programs I mentioned.
I got this phone from VIP SRB and I heard that if you buy a phone with contract like I did, they will somehow lock it to make it almost impossible to root.(I guess it's not impossible, that's why I'm asking you guys)
So my question is how to crack that protection that this phone has (If it has one) and how do I finally root it.
Same problem for me....
I have the same problem and posted a thread a couple of days ago.
I had already rooted my i5500, but I had a problem with titanium backup that I installed on it...it ended up stuck in the loop screen when I pulled the battery on it. I couldn't get the phone to do a factory restore by pressing whichever buttons I needed to, so I had to flash another rom, using Odin (latest one, i think...the phonebase is WJP4) to it and use backup to restore apps and setting etc..
I now can't root it using the same methods you have and get the same error messages. Although with Super One Click it gets to stage 3 of rooting and then it's as though I have pulled the USB cable out, so it can't finish the root
I am going to flash an older rom to it and see if that has any effect...I want to eventually put a custom rom on it!!!
this worked for me...
After my last post here I tried reflashing a stock rom to my i5500 to see if that was the problem and it didn't, still had the same issues as you did.
My success came when I used Unlock Root 2.2. You have to install it on your computer and enable USB debugging on your phone (as with SuperOne Click) but it worked without errors!
I hope this method works for you (I think it would have worked without me reflashing my phone), let me know if it works
Worked OK!
chrisbrawn said:
After my last post here I tried reflashing a stock rom to my i5500 to see if that was the problem and it didn't, still had the same issues as you did.
My success came when I used Unlock Root 2.2. You have to install it on your computer and enable USB debugging on your phone (as with SuperOne Click) but it worked without errors!
I hope this method works for you (I think it would have worked without me reflashing my phone), let me know if it works
Click to expand...
Click to collapse
Hi Chris, I just did as described in my wife's 5500.. it took me less than 5 minutes, thanks a lot! Now looking for a better ROM than the stock 2.2.2, any hints?
All the best!
edugreen said:
Hi Chris, I just did as described in my wife's 5500.. it took me less than 5 minutes, thanks a lot! Now looking for a better ROM than the stock 2.2.2, any hints?
All the best!
Click to expand...
Click to collapse
Hi guys, can u please provide a clear download link for that program u used. Thank you
looking for answer
i have same issue but did not find any solution
Help. I have a Superpad 8 Chinese tablet that will not boot.
At first, it would boot only as far as the "Andrtoid" boot animation and just hang there.
Then I started trying to restore a different ROm to it.
ADB sees it, and I was able to pull the /system directory from the tab.
After trying to flash a ROM to it using this "Livesuite" app I found, , which completed successfully, but since then, when the tab boots, it displays absolutely nothing.
ADB still sees it, but whatever command I send (adb reboot recovery or adb reboot bootloader), it just reboots and does nothing...
Can ANYBODY help, please?
I am still very new to ADB & troubleshooting Android, so I need all the help I can get!
Thanks in advance, and if you manage to get this tab working for me, I'll buy you a beer or 5...
skoop99 said:
Help. I have a Superpad 8 Chinese tablet that will not boot.
At first, it would boot only as far as the "Andrtoid" boot animation and just hang there.
Then I started trying to restore a different ROm to it.
ADB sees it, and I was able to pull the /system directory from the tab.
After trying to flash a ROM to it using this "Livesuite" app I found, , which completed successfully, but since then, when the tab boots, it displays absolutely nothing.
ADB still sees it, but whatever command I send (adb reboot recovery or adb reboot bootloader), it just reboots and does nothing...
Can ANYBODY help, please?
I am still very new to ADB & troubleshooting Android, so I need all the help I can get!
Thanks in advance, and if you manage to get this tab working for me, I'll buy you a beer or 5...
Click to expand...
Click to collapse
Is youre problem solved??
cejean said:
Is youre problem solved??
Click to expand...
Click to collapse
Hi Have the same problem if anyone can help Please. I'm still new to all this
same problem any ideas
any ideas to fit the problem?
Hello, I had a very similar problem which I had which might help with a BC1003 user.
first was the internal LCD cable came loose.. common problem...
Another was it would not boot at all. So I used Livesuit with "sun4i_crane_bc1003.img" dated August 2012... November 2012 did not work!.
It does appear to matter which .img file you use (unfortunately), because the WiFi does not work with the November version.
hi ... same tablet, some problem...
skoop99 said:
Help. I have a Superpad 8 Chinese tablet that will not boot.
hi ... same tablet, some problem...
after 3 days trying every possible firmware, and booting them from external sd card
all i could do was change de logo at boot start from (mapan to kosaco, to oem etc..)
than i had the idea of removing the internal sd card to look at it ...
and guess what it still runs the same with out no sd card in or out
so i thought ... the sd card was never read in the first place cause is damage or corrupted...
so on the 4th day im trying to format and partition the new internal sd card... hoping for the best.
by know u may not even have that tablet anymore but is food for thought for a next android promblems.
:good:
Click to expand...
Click to collapse
Deal Friends,
I got Samsung Galaxy Ace GT-5830D from Canada and It was network unlocked. The Android Version: gingerbread 2.3.4
Network Koodo.
when i take it it was working very well. only issue was network unlock. At that time it was possible to switch to recover mode and download mode but after I tried upgrading firmware the phone was not loading OS or even its not possible to ON it with recover mode.
I tried reading many article publish hear as well as android forum. I couldn't find out a solution.
My phone is not working. can go to Download mode only.
I followed the instruction give here to unlock my phone;
http://forum.xda-developers.com/showthread.php?t=1645164
un-lucky it didn't work for me. after that my phone stuck at booting.
Using odin3 multidownloader also I tried (flashed) but didn't work. But it is detecting my phone.
at the very first time when I attached to my phone to PC, Kies show the details on the picture attached.
Even I try to use adb shell to restore the file but adb shell is not detected my phone. see the attached picture
Please be kind enough to help me to recover my phone.
YOU any one can help me in fixing my phone I greatly appreciate.
contact me: k m g i 0 4 1 5 @ y a h o o . c o m (ignore spaces)
Thanks
regards
Gayan
You have used the wrong tutorial to unlock your phone. The GT-S5830i has completely different hardware specifications and partition table from the GT-S5830D, which is the same as the Original Galaxy Ace.
Unfortunately, you have already done the phone in, and the only advice would be to send it for service, and use the appropriate tutorial next time.
You wouldn't care where I sent this message from.
gayankmg said:
Deal Friends,
I got Samsung Galaxy Ace GT-5830D from Canada and It was network unlocked. The Android Version: gingerbread 2.3.4
Network Koodo.
when i take it it was working very well. only issue was network unlock. At that time it was possible to switch to recover mode and download mode but after I tried upgrading firmware the phone was not loading OS or even its not possible to ON it with recover mode.
I tried reading many article publish hear as well as android forum. I couldn't find out a solution.
My phone is not working. can go to Download mode only.
I followed the instruction give here to unlock my phone;
http://forum.xda-developers.com/showthread.php?t=1645164
un-lucky it didn't work for me. after that my phone stuck at booting.
Using odin3 multidownloader also I tried (flashed) but didn't work. But it is detecting my phone.
at the very first time when I attached to my phone to PC, Kies show the details on the picture attached.
Even I try to use adb shell to restore the file but adb shell is not detected my phone. see the attached picture
Please be kind enough to help me to recover my phone.
YOU any one can help me in fixing my phone I greatly appreciate.
contact me: k m g i 0 4 1 5 @ y a h o o . c o m (ignore spaces)
Thanks
regards
Gayan
Click to expand...
Click to collapse
did u make a backup?
i'm not sure if will work but did u try make a hard reset and wipe all?
Hello everyone,
My name is Max, and i have a problem with a tabelt: note 10.1 GT-N8010.
I wanted to fix this tablet because its not booting anymore, its stuck at the logo. things that i tryed.:
1. i tryed to fix it with odin to install a stock rom< odin is finding my tabelt and its installing everything just fine but its still stuck at the boot logo. even after 30min
2. i tryed to unlock USB debugging but that fail. because ADB is not regonizing my tablet, even with the USB drivers installed.
3. i tryed to use the programm called SkipSoft ToolKit, but this tool kit is also using ADB. and like i sad ADB is not finding my tabelt.
Anyone who could help me with this problem, i have been searching XDA formus and google for 1 day now and didnt find any thing that helped me.
Thx for reading,
Regard Max
maxvg said:
Hello everyone,
My name is Max, and i have a problem with a tabelt: note 10.1 GT-N8010.
I wanted to fix this tablet because its not booting anymore, its stuck at the logo. things that i tryed.:
1. i tryed to fix it with odin to install a stock rom< odin is finding my tabelt and its installing everything just fine but its still stuck at the boot logo. even after 30min
2. i tryed to unlock USB debugging but that fail. because ADB is not regonizing my tablet, even with the USB drivers installed.
3. i tryed to use the programm called SkipSoft ToolKit, but this tool kit is also using ADB. and like i sad ADB is not finding my tabelt.
Anyone who could help me with this problem, i have been searching XDA formus and google for 1 day now and didnt find any thing that helped me.
Thx for reading,
Regard Max
Click to expand...
Click to collapse
I think you accidentally stumbled into the wrong forum. This one is for the P7500/7510 type 10.1 tablet... The very first one.
I'm betting you'll have better luck with your questions in the correct forum.
Sorry I couldn't help you more.
Best of luck.
Olivier V said:
I think you accidentally stumbled into the wrong forum. This one is for the P7500/7510 type 10.1 tablet... The very first one.
I'm betting you'll have better luck with your questions in the correct forum.
Sorry I couldn't help you more.
Best of luck.
Click to expand...
Click to collapse
awh thx,
im very sry that i did this, im kinda new here :/:angel:
This thread for question and answer. Reserved.
Hey I need your help. I have edited /fstab.qcom file(backup fastab.qcom.bak). I can start TWRP but I don't where the "root" partition is?
/-
|- /system is patirtion
|- /data is patirtion
But where is / itself
I tried restoring boot partition from dd IMG that I had, but it didn't help. Help me please. It's urgent. My phone was only phone. This is my only phone.
Someone tell me where are / or root are stored
ro.build.id=LMY47V
ro.build.version.security_patch=2017-07-01
ro.product.name=Alcatel_4060A
def.tctfw.brandMode.name=Alcatel IDEAL
def.tctfw.build.number=M7UUAU1
ro.product.pcsuite=Alcatel IDEAL
Does this version support VoLTE Video call?
Has anyone realise sudden changes in brightness to 100% while using ?
Well I happens with my phone. Sometime at night when I set brightness to minimum and using my phone the brightness increases. To set to minimum I change the valve by sliding then back to minimum.
Are you guys are suffering from this problem or its just me.
Does this phone support usb otg?
Why my contact app is showing nickname, how can I disable this, I tried installing google contact, but no success, looks like problem of OS not contact app.
kdm6389 said:
Has anyone realise sudden changes in brightness to 100% while using ?
Well I happens with my phone. Sometime at night when I set brightness to minimum and using my phone the brightness increases. To set to minimum I change the valve by sliding then back to minimum.
Are you guys are suffering from this problem or its just me.
Click to expand...
Click to collapse
Fixed by M7UUAU1 ROM
@Chupi383 I want to draw your lillte attantion for once to post number #3, #5, #6. These are not serious issue. just i want to know if u have suffered these problem, maybe you have fix to share with us.
The root partition on Android is always in the initrd in the boot partition.
I see no option for video call of any sort on any firmware for this phone. It is designed for US use, and video call isn't a standard feature here.
No, USB OTG is not supported. The software stack for it is present, so some USB OTG detector apps will tell you it's supported, but the hardware for it is not there. I plugged in a few devices with USB OTG adapters that work on my Galaxy S7 Edge and nothing happens -- no power to the device, nothing detected on the phone. Even using a tee adapter that lets me power both the device and phone USB port, the phone doesn't enumerate or detect the device.
I have been using Google's contacts app successfully and it works well. I haven't tried assigning a "nickname" to a contact. It just shows their first and last name as I've entered them.
Brightness does randomly change to 100% on some firmware versions. Best I can tell, it only happens with USB debugging enabled, or possibly only after connecting to the phone on adb. Disable USB debugging and reboot after you're done hacking and it shouldn't do that anymore.
Alcatel 4060a I rooted device using kingoroot or king root with purify already with it, I obtained root ,used phone. I removed system apps n bloatware. Ok then I wanted to give my phone away airgo I took back root access, n went n removed all my Google account s then went into phone settings, and reset it. Well erased n Reeset. As soon as I hit the reset button. It went to black then Alcatel powered by Android screen. Now is stuck can't get it to boot to anything. My computer recognizes but when I run adb command window says no connected devices. Help me please like step by step instructions please
ashluvsgary420 said:
Alcatel 4060a I rooted device using kingoroot or king root with purify already with it, I obtained root ,used phone. I removed system apps n bloatware. Ok then I wanted to give my phone away airgo I took back root access, n went n removed all my Google account s then went into phone settings, and reset it. Well erased n Reeset. As soon as I hit the reset button. It went to black then Alcatel powered by Android screen. Now is stuck can't get it to boot to anything. My computer recognizes but when I run adb command window says no connected devices. Help me please like step by step instructions please
Click to expand...
Click to collapse
adb dont work on reseted phone, to anable you have to go setting > developer mode > USB debugging.
or wait for 30min to start phone since it take little time after reset
or you have bricked your alcatel
try using
Code:
$ [B]fastboot -i 0x1bbb devices[/B]
ashluvsgary420 said:
Alcatel 4060a I rooted device using kingoroot or king root with purify already with it, I obtained root ,used phone. I removed system apps n bloatware. Ok then I wanted to give my phone away airgo I took back root access, n went n removed all my Google account s then went into phone settings, and reset it. Well erased n Reeset. As soon as I hit the reset button. It went to black then Alcatel powered by Android screen. Now is stuck can't get it to boot to anything. My computer recognizes but when I run adb command window says no connected devices. Help me please like step by step instructions please
Click to expand...
Click to collapse
Go to through https://forum.xda-developers.com/android/general/super-guide-alcatel-one-touch-4060a-t3621525 to unbrick