hello all,
i've been talking about the black screen camera issue on z2. But now i see a connection between the led flashlight and the camera. Can u test your flashlight notification to see if it works properly? Mine doesn't turns of correctly. And if i start the camera, either will appear a black screen, either it will say "camera not available". Your flashlight is working properly?
Yes, the same here, I'm on .726 and this is a bug, I just checked. But not a big deal anyway, all you have to do is to not forget to turn off flashlight before you start the camera app
---------- Post added at 12:35 AM ---------- Previous post was at 12:34 AM ----------
but mine turns on and off with no issues
Related
Is it just me or anyone else have same problem with auto rotate not working in home screen display? I just found out that my Mini Pro SK17i with default 2.3.3 have problem auto rotating in home screen now. After I click an app or widget the display will go landscape from portrait if I hold in horizontal position, but it stays portrait even when I hold it in horizontal position while in home screen. The only exception is when I slide open the keyboard then the display will go landscape. Is it normal or is it just me? Is there any solution.
I'm led to believe that this is a part of the design, and the home screen assumes you will pull out the keyboard when you flip it sideways. :/
I've noticed a similar issue while using my Sk17a as well, at least.
Yes, its normal. The display only rotates when you pull out the keyboard
It is normal then...tough sometimes I see the display got rotate for a few second....thanks for the reply
Hey all,
I'm getting this problem even with keyboard out, will test again when my phone is fully charged and back up running.
I'm using Mini pro, latest versions of miniCM7 & nAA Kernal.
StevenArnoldi said:
Hey all,
I'm getting this problem even with keyboard out, will test again when my phone is fully charged and back up running.
I'm using Mini pro, latest versions of miniCM7 & nAA Kernal.
Click to expand...
Click to collapse
Tried again, not working. If anyone an point me in the right direction. Searching the forum but not having much luck
One of the last few things I need to fix!
---------- Post added at 11:09 PM ---------- Previous post was at 11:03 PM ----------
st3v4nt said:
It is normal then...tough sometimes I see the display got rotate for a few second....thanks for the reply
Click to expand...
Click to collapse
And I don't think this is normal... before I flashed with miniCM7 it rotated fine and the fact it does for a second then rotates back is not normal in my eyes.
[EDIT] Right I have found out that official updates have caused this problem but I should still be-able to get the home screen to rotate when the keyboard is slid out. This does not happen.... anyone know why or could point me to a fix? And I have auto-rotate already on
Hi, I have the S6 Edge. The touch key lights are not working at all. In Settings I have the Touch Key Light duration set to "Always On". Power Saving Mode is off, but they still won't come on. The keys do blink briefly during startup, so I do know they physically work. Any ideas? Thanks
asolo157 said:
Hi, I have the S6 Edge. The touch key lights are not working at all. In Settings I have the Touch Key Light duration set to "Always On". Power Saving Mode is off, but they still won't come on. The keys do blink briefly during startup, so I do know they physically work. Any ideas? Thanks
Click to expand...
Click to collapse
It could be one of two things imo. Defective unit or display unit.
asolo157 said:
Hi, I have the S6 Edge. The touch key lights are not working at all. In Settings I have the Touch Key Light duration set to "Always On". Power Saving Mode is off, but they still won't come on. The keys do blink briefly during startup, so I do know they physically work. Any ideas? Thanks
Click to expand...
Click to collapse
I think the capacitive touch screen lights are automatically disabled if one of the power saving modes are activated. Check to see if one of them are enabled.
The behavior of the touch light keys is tied to the "power saving mode". By enabling "power saving" mode it seems the touch light keys remain off.
Same thing just happened to my S6 (not the edge model). Battery was getting low, turned on the power saver mode, charged the phone back up 100%, turned power saver mode back off and now my buttons don't light up. I noticed they to will flicker when the phone is restarted.
---------- Post added at 03:00 PM ---------- Previous post was at 02:49 PM ----------
OK I think I just fixed it. Set your capacitive keys to always on, then go to power saver settings and set it to immediately. Now no matter what percentage your battery is at your phone will go into power saver. Then turn it off right away and your keys should light back up.
Where are you guys finding the setting to adjust the capacitive lights? I've looked everywhere and can't find it. Even googled it. I want mine permanently off and all i found was "use power save mode for that"
Same thing here! I already contacted Samsung and Sprint, they don't know how to fix it! Take it to the store to get a replacement !
stretchwookie said:
Where are you guys finding the setting to adjust the capacitive lights? I've looked everywhere and can't find it. Even googled it. I want mine permanently off and all i found was "use power save mode for that"
Click to expand...
Click to collapse
Settings > quick setting > display > touch key light duration
odobo said:
Settings > quick setting > display > touch key light duration
Click to expand...
Click to collapse
Must be carrier specific. I have the tmobile version and that's not an option there. But my other samsungs i had at sprint all had that option right where you said it should be.
stretchwookie said:
Must be carrier specific. I have the tmobile version and that's not an option there. But my other samsungs i had at sprint all had that option right where you said it should be.
Click to expand...
Click to collapse
Download a app to turn it off then
odobo said:
Download a app to turn it off then
Click to expand...
Click to collapse
Which app?
optimummind said:
Which app?
Click to expand...
Click to collapse
Hopefully this works on all versions. I've tested on a Verizon S6 Edge.
Galaxy Button Lights
Averix said:
Hopefully this works on all versions. I've tested on a Verizon S6 Edge.
Galaxy Button Lights
Click to expand...
Click to collapse
Can confirm that this works great on the tmobile s6 edge
Averix said:
Hopefully this works on all versions. I've tested on a Verizon S6 Edge.
Galaxy Button Lights
Click to expand...
Click to collapse
Confirmed working on my Sprint S6E. Thank you!
Sent from my SM-G925P using Tapatalk
It works perfectly on my T-Mobile S6 Edge!
jon25rs said:
Same thing just happened to my S6 (not the edge model). Battery was getting low, turned on the power saver mode, charged the phone back up 100%, turned power saver mode back off and now my buttons don't light up. I noticed they to will flicker when the phone is restarted.
---------- Post added at 03:00 PM ---------- Previous post was at 02:49 PM ----------
OK I think I just fixed it. Set your capacitive keys to always on, then go to power saver settings and set it to immediately. Now no matter what percentage your battery is at your phone will go into power saver. Then turn it off right away and your keys should light back up.
Click to expand...
Click to collapse
YES!!!! That fixed my issue too. This happened a couple weeks ago. I couldn't figure it out so I did a factory reset (fixed it). Now it cropped up again this past weekend. Glad I'm not the only one. It is an ugly software bug I hope gets fixed.
Definitely a Software Bug !!
asolo157 said:
Hi, I have the S6 Edge. The touch key lights are not working at all. In Settings I have the Touch Key Light duration set to "Always On". Power Saving Mode is off, but they still won't come on. The keys do blink briefly during startup, so I do know they physically work. Any ideas? Thanks
Click to expand...
Click to collapse
scottiedoggy said:
YES!!!! That fixed my issue too. This happened a couple weeks ago. I couldn't figure it out so I did a factory reset (fixed it). Now it cropped up again this past weekend. Glad I'm not the only one. It is an ugly software bug I hope gets fixed.
Click to expand...
Click to collapse
I had the same issues you guys had on my international (SM-G925I) model. After factory reset it just works fine. Maybe its a software bug and hope Samsung fixes this with the next update ... :good: :good: :angel:
jon25rs said:
Same thing just happened to my S6 (not the edge model). Battery was getting low, turned on the power saver mode, charged the phone back up 100%, turned power saver mode back off and now my buttons don't light up. I noticed they to will flicker when the phone is restarted.
---------- Post added at 03:00 PM ---------- Previous post was at 02:49 PM ----------
OK I think I just fixed it. Set your capacitive keys to always on, then go to power saver settings and set it to immediately. Now no matter what percentage your battery is at your phone will go into power saver. Then turn it off right away and your keys should light back up.
Click to expand...
Click to collapse
Thanks! It fixed mine too but I had to do an additional step of turning power saver off, then back on, then changing it to turn on at 15% (from immediately) and turning it back off.
Such a weird bug.
Had the same problem. Did restarts/ full wipe/ called customer service/ went to service carrier store.... Problem ended up being the case I had purchased (phone specific at that). If you have this problem try removing the screen protector and phone case restart the phone and plug into the charger. Keep in mind that I had the exact same case on without removal for a few weeks before it started interfering with the captive keys. My keys have been working 100% since minus the protection.
jon25rs said:
Same thing just happened to my S6 (not the edge model). Battery was getting low, turned on the power saver mode, charged the phone back up 100%, turned power saver mode back off and now my buttons don't light up. I noticed they to will flicker when the phone is restarted.
---------- Post added at 03:00 PM ---------- Previous post was at 02:49 PM ----------
OK I think I just fixed it. Set your capacitive keys to always on, then go to power saver settings and set it to immediately. Now no matter what percentage your battery is at your phone will go into power saver. Then turn it off right away and your keys should light back up.
Click to expand...
Click to collapse
Thank you so much! Fixed mine this way
Yesterday i had attended the Tizen Developer Summit at Bangalore
Developer Device given at TDS15BLR is not working after enabling the SST option available in Accesibility
I was testing the device , in the Setting > Accesibility > SST
i turned it on , after that whenever i touch the screen some voice response are generated by the system,
to get rid of that i turned of the phone and when i switched it on again , nothing is happening , wherever i touch on the screen there is no response ,
the only sound coming are
1. when screen is unlocked by the side key - "Screen is Unlocked"
2. When screen is locked back by the side key - "Screen is Locked"
3.When charger is connected - "Charger connected"
4.When charger is removed - "Charger disconnected"
apart from this nothing is working , the phone is good as dead ,
everything was working fine before i switched the above mentioned feature on.
is there any way i can reset the handset to previous settings.
please help
Maybe try to find key combo for Recovery Mode...
http://forum.xda-developers.com/showpost.php?p=58693279&postcount=21
No idea yet, which keys for Z1...
But maybe similar to Z3...
Best Regards
---------- Post added at 12:58 AM ---------- Previous post was at 12:11 AM ----------
Short tested on Z1...
For Recovery Mode hold 3 keys at same time...
Code:
Volume UP
"middle key"
Power on
I have no Z3 to check self...
Good luck.
Best Regards
Hi,
I am using Huawei honor 7 from the last two months.one month before I got and update(versionLK-UL00C675B170).After the updation I am facing an issue with my display.The screen is flickering when the display is on.
I've just picked mine up and the screen is flickering. I've no idea why or if my phone has had a recent update.
---------- Post added at 01:50 PM ---------- Previous post was at 01:19 PM ----------
and it's stopped...
Flickering screen is usually to do with the auto brightness, try turning it off? My screen shakes when I scroll though pages.. But I get flickering sometimes too
The Euro version got very good auto screen brightness from the B180 firmware.
I don´t know about PLK00
Plk-ul00c675b170
friends... how to update my honor 7 PLK-UL00C675B170 to android M.....
Hello everyone,
would like to ask those with Oreo, if Honors internal app "Screen Lock" is still present.
In v.183 I can map it as Shortcut in Nova Prime for "double tap" and still use fingerprint unlock without that 5 sec delay.
And Novas admin can still be inactive.
Thanks
With oreo, Screen lock doesn't work anymore with Nova. Flashlight too. Rotation of lock screen is not working too. I forget, proximity sensor is off when screen off, can't wake up your device with gravity screen for example.
sonneper said:
With oreo, Screen lock doesn't work anymore with Nova. Flashlight too. Rotation of lock screen is not working too. I forget, proximity sensor is off when screen off, can't wake up your device with gravity screen for example.
Click to expand...
Click to collapse
Ouch... that's bummer. So no Oreo for me, at least till Honor get their softw right.
But I guess it's probably also a Googles fault partially
screen lock and flashlight doesn't work IF you use huawei widget ,but for sure ,it's possible to lock screen by shortcut ( from other apps ) or use flashligt from other app or shortcut in taskbar. I tink it's more EMUI8 than Oreo.
---------- Post added at 12:49 ---------- Previous post was at 12:47 ----------
But, I've try many " wake up screen " using proximity sensor, no one is OK
sonneper said:
screen lock and flashlight doesn't work IF you use huawei widget ,but for sure ,it's possible to lock screen by shortcut ( from other apps ) or use flashligt from other app or shortcut in taskbar. I tink it's more EMUI8 than Oreo.
---------- Post added at 12:49 ---------- Previous post was at 12:47 ----------
But, I've try many " wake up screen " using proximity sensor, no one is OK
Click to expand...
Click to collapse
Of course it is possible to use lock screen from 3rd party app, but lock screen in Nova works OK. The thing is that it's only work with 5 sec delay, as every other lock screen except original Huawei (which is not accessible in other than Emui launcher). Flash light i don't care as it's working from taskbar or tons of 3rd party app.
Wake up screen is no problem neither as fp reader is in front, which I prefer anyway.
Anyone get this to work?
Changed to nova launcher, and found out the existing widget now can't be used.
Hate the device admin screen lock, as well as the 5 seconds delay screen lock(as I can still input the touch screen and back button...)