My lenovo P780 4g updated to kit kat ROW 221 and found its not for me. I want to flash back to ROW 124 pre-rooted firmware but accidentally brick it. Stuck on boot lenovo logo. Cant boot to recovery, only factory and meta mode. Tried restoring back to stock ROW firmware using flashtools but it cant detact my device. Tried and fail miserably. Someone help me.:crying:
alongbalbol said:
My lenovo P780 4g updated to kit kat ROW 221 and found its not for me. I want to flash back to ROW 124 pre-rooted firmware but accidentally brick it. Stuck on boot lenovo logo. Cant boot to recovery, only factory and meta mode. Tried restoring back to stock ROW firmware using flashtools but it cant detact my device. Tried and fail miserably. Someone help me.:crying:
Click to expand...
Click to collapse
Hi. You softbriked you phone! You are not alone ! Luky you, we Lenovo freaks are here !
Look what you have to do !
1. Start Flash tool and get ready to flash your phone!
2. Press firmware upgrade and plug your USB cable on your phone!
3. SOOO... your phone should start flashing... but... not...
4. Open the back case of your phone and press the small red button for 20 secconds!
5. After release of the small red button the flashing process should start!
6. If not PM me and get ready for a teamviewer session !
7. Good Luck !
Related
HELP, I had soft bricked my phone after installed an app "beats audio..." I'm now stuck at the login screen huawei logo. Can any one help me to unbrick my mediapad? Thank you very much all!
I only root my phone, haven install any ROM in it. so its the international ICS version ROM.
nders said:
HELP, I had soft bricked my phone after installed an app "beats audio..." I'm now stuck at the login screen huawei logo. Can any one help me to unbrick my mediapad? Thank you very much all!
I only root my phone, haven install any ROM in it. so its the international ICS version ROM.
Click to expand...
Click to collapse
Download an official ics firmware from huaweidevice.com and follow the installation instructions (sd-card required). You will loose your data though...
There are other methods, but this one is really easy.
Worst Case - if you REALLY ****ed up and nothing works anymore (no recovery, no boot, nothing) - you can just fetch a working update package and restore the partitions manually using fastboot flash.
The easy way, you can always boot in fastboot.
That is very easy:
complete shut down of the tablet
press the volume + button and while pressing press power
down release the volume until you see the fastboot screen
Once done, just launch the batch file included in the TMobile_Original_SpringBoard_ROM.rar: _Install_TMobile_.bat
Your tablet should reboot with the Tmobile ROM ICS on it and should be unbricked, if you have a different version than the tmobile you'll need to reflash the modem files, also the TWRP recovery in order to flash other ROMs
The Original TMo ROM can be found here: http://www.osimood.com/downloads/?category=12
Huawei Ideos X3 U8510-1 brick
mblaster said:
Download an official ics firmware from huaweidevice.com and follow the installation instructions (sd-card required). You will loose your data though...
There are other methods, but this one is really easy.
=================
im thinking maybe you can help me unbrick my Huawei Ideos X3 U8510-1
its stuck on the logo screen.
a few weeks after i rooted it the boot loader did not show on start up. i needed to flash my back up as the ear piece stopped working i know this to be 1 of the many bugs i had. the boot loader would not open wen i done power + volume up or down. so in busybox i seen a box called something like...boot with boot loader n i ticked it. it now a huawei logo bRiCk... dam thing. iv tried the sd thing iv quoted any ideas?
Click to expand...
Click to collapse
Hello everyone, this is my second post in the community and as above, I draw you before the serious problem that has my cell phone and that despite the help of all of you still not solved enclose descriptions videos and fails the steps and followed over time. :crying::crying:
All this happened when installing from retail jb rom ics one Chinese, after the installation the cell began to discharge too fast to the point of completely unloaded and not turn over, the next thing was wired switch it could enter the factory and then recovery only restarted.
after the above procedure to unbrick with Unbrick method & switch to 982.124.14.XT910.Retail.en.EU with which obtube not any response, after that a user community graciously offered to assist and I sending the same procedure but with the files for my region (Latam) after that the phone showed the motorola logo and restarted but at times passed motorola logo and showed the animated logo motorola, encendia the lights cell buttons and screen bottom came out "Wait a minute" restarted (enclose one. rar with videos of procedures performed and detailed information.
I count on your help and already thank you very much for reading my topic and I hope to get my phone I need too :crying:
:victorydt: my apologies for the bad drafting but all this is performed with English translator (I'm from chile) :laugh::laugh:
Hi,
Based on your video, I haven't see you flashed with RSD Lite and fastboot file.
You can give a try based on this thread:
http://forum.xda-developers.com/showthread.php?t=2231289
Download LATAM fastboot file (Chile should be latam right?) and download also latest rsd lite ver 6.1.4
Good luck and hope it will unbrick your phone.
idwijayaku said:
Hi,
Based on your video, I haven't see you flashed with RSD Lite and fastboot file.
You can give a try based on this thread:
http://forum.xda-developers.com/showthread.php?t=2231289
Download LATAM fastboot file (Chile should be latam right?) and download also latest rsd lite ver 6.1.4
Good luck and hope it will unbrick your phone.
Click to expand...
Click to collapse
reaches the motorola dual core logo and restarts :crying::crying:there some method other than by fasboot?, or some solution?
Have you download fastboot files that match with you region? if yes then you have same issue with me
So far what I know to flash is use batch file that developed by awesome developers here and RSD lite.
Have you try this:
- Go to boot menu (the way you get AP Fastboot menu) but this time try to select BP Tools
- and wait will your phone able to boot into system or not... If you able to boot into bp tools, get your phone root (JB is able for root now, get the thread in development), then install BMM to have it normal boot .. I got this suggestion but never able to have my phone boot in BP Tools, so I never know this works or not so good luck
- When you choose BP Tools and your phone still on M logo turn it off (you should wait only 10 or 15 minutes max) then turn off your phone and put it in boot menu to select BP HW Diag.. then.. we have same issue.. be prepare your phone only able to phone call , sms , taking camera, cannot access data only rely wifi , USB debugging not working, some fastboot files makes your phone not able to charge (I have to turn off my phone then charge)
I still strugling to have my phone back to normal also..
idwijayaku said:
Have you download fastboot files that match with you region? if yes then you have same issue with me
So far what I know to flash is use batch file that developed by awesome developers here and RSD lite.
Have you try this:
- Go to boot menu (the way you get AP Fastboot menu) but this time try to select BP Tools
- and wait will your phone able to boot into system or not... If you able to boot into bp tools, get your phone root (JB is able for root now, get the thread in development), then install BMM to have it normal boot .. I got this suggestion but never able to have my phone boot in BP Tools, so I never know this works or not so good luck
- When you choose BP Tools and your phone still on M logo turn it off (you should wait only 10 or 15 minutes max) then turn off your phone and put it in boot menu to select BP HW Diag.. then.. we have same issue.. be prepare your phone only able to phone call , sms , taking camera, cannot access data only rely wifi , USB debugging not working, some fastboot files makes your phone not able to charge (I have to turn off my phone then charge)
I still strugling to have my phone back to normal also..
Click to expand...
Click to collapse
did not work :crying::crying: still coming to dual core logo and restarts, other help......
Esto.Vir said:
did not work :crying::crying: still coming to dual core logo and restarts, other help......
Click to expand...
Click to collapse
Reflash the appropriate fastboot once again and then reboot into stock recovery and do fill wipe data and chaches . It may fix ya problem
Thx
Hit the thx button if i helped ya in anyways
anurag.dj2u said:
Reflash the appropriate fastboot once again and then reboot into stock recovery and do fill wipe data and chaches . It may fix ya problem
Thx
Hit the thx button if i helped ya in anyways
Click to expand...
Click to collapse
and tested with the brazil retail rom, fido, rogers ye had the same problem, my question is, if all the rom's the same that another problem will have my phone? , I can enter the ap fastboot recovery and all that d the stock recovery, my phone stayed brick to install a Chinese jb rom this tutorial :
http://www.chileandroid.com/t16992-romxt910jelly-bean-jelly-bean-41-2-china-retail-oficial
, Change kernel and everything that goes in the guide, that will be a problem? I hope you can help me from now thank you very much:crying::crying:
Hello all.
I've got problem with my i5510.
First.That I5510 has bootloop (restart and restart). I could put it on download mode. but not recovery mode.
So I flashed it with ODIN with new UK room (there is no rom for indonesia)
It passed but still restart
Then I flashed it by other ROM.
Finally, my I5510 is really DEAD now... T_T
Can't connect to PC,Can't download mode nor recovery mode.
I've try to Connect it by holding power + Q without battery wait for 10s than insert battery but it is still Can't connect to PC
Any idea?without JTAG?maybe by OMAP flash?
Thanks in advance...
Thanks for your help..
Sorry if I post this thread on a wrong room. this is my first Thread
Sorry for my bad english
i've jtag it and than now i got download mode.
but it is still restart when i flash it with latest rom and deadboot if i flash it with froyo rom. any idea?
can donload mode,can't recovery mode,but still restart flash with odin
Done.
>Full erase it by Jtag
>flsh with file dump althought i only get error : "bad address"
>Flash bootfile
>flash Foroyo via odin
now my i5510 back to life again but still get error
>Flash again with gingerbread
> Full Factory
I've got it normal again although I lost my IMEI,but still can dial,browsing,wifi,bluetooth..
If there is any guys who can teach me how to repair IMEI without BOX or dongle without backup EFS... Please help me...
Thanks
Hello all,
First of all, as a disclaimer: I am a total noob in this area. I just got my Ulefone T1, and tried to root it by installing TWRP and then installing SuperSU using TWRP. When I first installed TWRP, it worked and I got into the TWRP recovery menu. However, as the phone had to be wiped, I couldn't install the SuperSU zip anymore. I did a normal reboot to transfer the SuperSU zip to my phone, but when I then tried to turn my phone off and access TWRP, it went to normal recovery mode of my phone. As I wanted to start fresh off again, I went to the settings of my phone and did a factory reset silly.
Now, it is stuck in a bootloop where I can literally do nothing. I cannot access factory mode or recovery mode, all it does is just endlessly boot and turn off. I have managed to turn it off completely, but that's all I can do. Also, the battery is not removable.
Does anyone with a little more knowledge have a suggestion for me? Thanks in advance!
As an update, I got a suggestion to fully drain the battery, but that does not work either. I have tried connecting it to my PC, which is not working, but that was acting weird before. I guess it's just not possible?
did you work this out ? i am stuck in bootloop too ??????
Daviesjosh95 said:
did you work this out ? i am stuck in bootloop too ??????
Click to expand...
Click to collapse
I have no idea what software is necessary to do it for your device but you can flash stock rom, if it uses sp tool or something then download stock rom, use sp tool to flash it. Should be OK after that. As I am not familiar with this device I can't give you any other advice other than flashing stock rom.
Any solutions to unbricking/boot looping?
Have anyone found any solutions to unbricking phone??
Mine also did bootlooping after unlocking bootloader.
I was able to flash successfully but screen fussy and unreadable and not able to touch. I am able to hear but lines are on screen.
I have same problem, please, anyone help, I think I used wrong twrp image
Ulefone T1 Bootloop solution 2019.
I was able to fix the bootloop of my ulefone t1, just flash it with sp flash tool by following this guide:
1. Download the Stock Firmware on your personal computer.
2. Install the USB MTK Drivers (skip if you have it already installed).
3. Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
4. Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
5. Select the Scatter File from the extracted Stock Firmware on your computer.
6. Select the Download Only in the SP flash tool option
7. Click the Download button to start the Formating process.
8. Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
9. Patiently wait for your device to be formatted.
10. After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
11. Unplug your device and boot it up.
12. If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
13. Voila, you are all good.
Very important step 8 of the guide.
Hello,
I just received my brand new Samsung Galaxy A40 (SM-A405FN) and I wanted to root it / install Custom Rom before anything else.
So I downloaded TWRP 3.4.0 for my phone and tryed flashing it. But that did not work, I was stuck in download mode. So I decided to reflash original firmware. During the flash, Odin stuck itself at "Boot" operation during more than 15min, so I decided to reboot the phone to retry (what a big mistake...).
And now, I can't access Bootloader mode anymore, I only have a blue screen with "An error has occured while updating the device software. Use Emergency Recovery function in smart switch PC software".
I downloaded Smart Switch and tried the emergency recovery, but no devices appears in the list. Same thing with Kies...
I'm lost, please tell me I did not completely brick my brand new phone :crying: ...
Thank's for help and sorry for bad english...
EDIT: Ok, the phone is not dead ! I finally got the download mode back with the correct timing for key strokes!
Can someone tell me why I can't boot after flashing this TWRP: https://twrp.me/samsung/samsunggalaxya40.html ?
I saw this post which tells to flash Kernel & VBMeta with the recovery but Odin can't flash .img files: https://forum.xda-developers.com/galaxy-a40/development/recovery-twrp-galaxy-a40-t4025587
solved?
Brick Problem solved yes, I still have not manage to install TWRP but at least I have been able to re-install stock firmware. Maybe I should do another thread for that problem
maybe you can try to enter the forum according to the device you are using.