unbrick TF201 without the USB cable. It can be with male to male cable? because I do not have the USB cable.
lildark7 said:
unbrick TF201 without the USB cable. It can be with male to male cable? because I do not have the USB cable.
Click to expand...
Click to collapse
How do you charge it ?
Most likely you are going to need a data/charging cable ....
Thx Josh
I have a generic font but the entire font. You can not remove the USB connector. Sorry for my bad english
lildark7 said:
I have a generic font but the entire font. You can not remove the USB connector. Sorry for my bad english
Click to expand...
Click to collapse
Lets start slow .....
Is the bootloader unlocked ?
Thx Josh
ok. of course the bootloader is unlocked
lildark7 said:
ok. of course the bootloader is unlocked
Click to expand...
Click to collapse
What does the tablet do ...
Can you get to the booloader menu ?
Can you boot recovery ?
Thx Josh
lj50036 said:
What does the tablet do ...
Can you get to the booloader menu ?
Can you boot recovery ?
Thx Josh
Click to expand...
Click to collapse
Nothing of that. only freezes in the boot
lildark7 said:
Nothing of that. only freezes in the boot
Click to expand...
Click to collapse
If you cannot get to bootloader or recovery .....
If you dont have your nvflash blobs backed up .....
There is nothing that can be done even if you had a cord ....
Sorry for the bad news .....
Thx Josh
lj50036 said:
If you cannot get to bootloader or recovery .....
If you dont have your nvflash blobs backed up .....
There is nothing that can be done even if you had a cord ....
Sorry for the bad news .....
Thx Josh
Click to expand...
Click to collapse
I guess I can use the USB port on the external keyboard to revive
lildark7 said:
I guess I can use the USB port on the external keyboard to revive
Click to expand...
Click to collapse
With out having access to the bootlaoder or recovery, nothing can be done ....
Short of replacing the motherboard, it is a lost cause .....
Thx Josh
You can not repair or the USB cable?
lildark7 said:
You can not repair or the USB cable?
Click to expand...
Click to collapse
I said without access to the bootloader or recovery, even if you have a USB cable there is nothing that can be done .....
Its a brick ....
Thx Josh
if I press volume down button and power button because I can not enter the options
but if I press the volume up button and the power button, the PC recognizes the APX mode
there any way to fix it?
lildark7 said:
if I press volume down button and power button because I can not enter the options
but if I press the volume up button and the power button, the PC recognizes the APX mode
there any way to fix it?
Click to expand...
Click to collapse
Yep if you would have backed up your nvflash blobs .....
Without then its a brick .....
Thx Josh
lj50036 said:
Yep if you would have backed up your nvflash blobs .....
Without then its a brick .....
Thx Josh
Click to expand...
Click to collapse
you can not copy the back of another Prime?
since I have no backup
lildark7 said:
you can not copy the back of another Prime?
since I have no backup
Click to expand...
Click to collapse
No mate. The backup is tied to the specific motherboard it came from.
I understand. then I have a beautiful brick.
Someone can help me fix my tablet?
its possible fix for this?
http://forum.xda-developers.com/showthread.php?t=2178110
Related
To the experts
Is it possible to use the way in this web link with " prophet "
http://forum.xda-developers.com/showthread.php?p=2104049#post2104049
no, prophet doesn't have microsd
besides, with all the latest roms you just double click and it's ready to install
thank
wanwarlock said:
no, prophet doesn't have microsd
besides, with all the latest roms you just double click and it's ready to install
Click to expand...
Click to collapse
Thank you for your reply Karim
I have a problem at the entrance to the usb
Is there a solution
I have a problem in the Rom
hanafi2009 said:
Thank you for your reply Karim
I have a problem at the entrance to the usb
Is there a solution
I have a problem in the Rom
Click to expand...
Click to collapse
In my signature is a Tool to put your phone in to bootloader mode this will allow you to flash a new ROM using RUU
Or you can do it manualy by Press reset with stylus while holding comms buton keep comms held till three couour bootloader mode is displayed
wapvirus said:
In my signature is a Tool to put your phone in to bootloader mode this will allow you to flash a new ROM using RUU
Or you can do it manualy by Press reset with stylus while holding comms buton keep comms held till three couour bootloader mode is displayed
Click to expand...
Click to collapse
In my signature is a Tool to put your phone in to bootloader mode this will allow you to flash a new ROM using RUU
Click to expand...
Click to collapse
Please explain in detail .. Should the definition of cable and the original computer does not recognize the mobile
hanafi2009 said:
Please explain in detail .. Should the definition of cable and the original computer does not recognize the mobile
Click to expand...
Click to collapse
Ok if you can'tconnect the cable then your f****d (you didn,t explain properly)
How do you charge your device ?
Posted before, can't find a solution through searching
Here's the rundown
I can get into bootloader,and recovery, but adb isnt seeing my device when it's in fastboot usb.
I don;t know what to do please help
xquantums said:
Posted before, can't find a solution through searching
Here's the rundown
I can get into bootloader,and recovery, but adb isnt seeing my device when it's in fastboot usb.
I don;t know what to do please help
Click to expand...
Click to collapse
when you get into bootloader you have to hit the power button once to get into fastboot mode. try all in one toolkit run the command follow the on screen instructions if it says waiting for device hit the power button once and it should start
skinsfanbdh said:
when you get into bootloader you have to hit the power button once to get into fastboot mode. try all in one toolkit run the command follow the on screen instructions if it says waiting for device hit the power button once and it should start
Click to expand...
Click to collapse
All in one isnt working at all, not cmd windows come up or anything.
xquantums said:
All in one isnt working at all, not cmd windows come up or anything.
Click to expand...
Click to collapse
fixed all in one. Noob mistake.
xquantums said:
fixed all in one. Noob mistake.
Click to expand...
Click to collapse
so your all good now?
skinsfanbdh said:
so your all good now?
Click to expand...
Click to collapse
Nope. Device still not showing up in adb.
"device not found"
xquantums said:
Nope. Device still not showing up in adb.
"device not found"
Click to expand...
Click to collapse
did you press power button once
I encountered a similar issue when I tried to flash a new rom. I have 2 computers, one with Windows 8 and the other with Windows 7. I found that I couldn't get adb working on the Win8 PC but it worked nicely on the win7.
You should also make sure your USB Cable is good and not plugged into any USB Hub or USB 3.0 plug
Best to plugin to the motherboard directly. I learned this the hard way one day with a USB Hub. Nothing worked till i unhooked the Hub from the PC
I have no problems in windows 8 now
skinsfanbdh said:
did you press power button once
Click to expand...
Click to collapse
yessir
i tried to downgrade my tablet z2 to 442 but got wrong firmware i turned in to a z2 phone and it just does a buzz and nothing no picture. can i fix this some how got in touch with sony by chat they void so they wont help this is my last hope:crying:
mick1971 said:
i tried to downgrade my tablet z2 to 442 but got wrong firmware i turned in to a z2 phone and it just does a buzz and nothing no picture. can i fix this some how got in touch with sony by chat they void so they wont help this is my last hope:crying:
Click to expand...
Click to collapse
Can you boot into "Fastboot" mode? (tab off, hold Vol- and connect USB cable, led should turn blue, if not try Vol+ and connect USB cable)
Either way this should check and see if you can communicate a little bit.
Moscow Desire said:
Can you boot into "Fastboot" mode? (tab off, hold Vol- and connect USB cable, led should turn blue, if not try Vol+ and connect USB cable)
Either way this should check and see if you can communicate a little bit.
Click to expand...
Click to collapse
yeah it turned blue so what do i have to do now ? more help pleaseeee:crying:
mick1971 said:
yeah it turned blue so what do i have to do now ? more help pleaseeee:crying:
Click to expand...
Click to collapse
I'm using CM12, so I don't know what exactly you have to do (never did that myself) , but I guess:
- Get a ftf-file for your tablet
- Install Sony drivers and Flashtool on your PC
- Flash ftf with Flashtool
Google is your friend have fun
BabelHuber said:
I'm using CM12, so I don't know what exactly you have to do (never did that myself) , but I guess:
- Get a ftf-file for your tablet
- Install Sony drivers and Flashtool on your PC
- Flash ftf with Flashtool
Google is your friend have fun
Click to expand...
Click to collapse
it says turn on debugging but i cant turn the tablet to do so
all done got it work thanks for help
mick1971 said:
all done got it work thanks for help
Click to expand...
Click to collapse
Glad it's working.
Remember, if you can get it into fastboot mode, then chances are you can always flash a system image or an ftf file.
I am trying to unlock my bootbloader but I can't seem to get my phone to boot into fastboot. I have tried the official method posted through the Sony Developer site and It says to Hold the power button + Volume down at the same time and plug it into your computer. And when I do this, a blue light should come on notifying me that I'm in fastboot mode. But no matter how much I try this, my phone simply just changes its state to charging. Can someone please help me out?
HaveYouMetRandy said:
I am trying to unlock my bootbloader but I can't seem to get my phone to boot into fastboot. I have tried the official method posted through the Sony Developer site and It says to Hold the power button + Volume down at the same time and plug it into your computer. And when I do this, a blue light should come on notifying me that I'm in fastboot mode. But no matter how much I try this, my phone simply just changes its state to charging. Can someone please help me out?
Click to expand...
Click to collapse
press and hold volume up button only and insert the usb cable.
waqaswasil said:
press and hold volume up button only and insert the usb cable.
Click to expand...
Click to collapse
This didn't work, it only charges my phone.
HaveYouMetRandy said:
This didn't work, it only charges my phone.
Click to expand...
Click to collapse
have you installed the fastboot drivers?
waqaswasil said:
have you installed the fastboot drivers?
Click to expand...
Click to collapse
I have
HaveYouMetRandy said:
I have
Click to expand...
Click to collapse
which version of windows are you using?
waqaswasil said:
which version of windows are you using?
Click to expand...
Click to collapse
I'm using windows 8.1 Pro x64
HaveYouMetRandy said:
I'm using windows 8.1 Pro x64
Click to expand...
Click to collapse
"Windows 8.1" is the problem.
install this:
https://support.microsoft.com/en-us/kb/2917929
waqaswasil said:
"Windows 8.1" is the problem.
install this:
https://support.microsoft.com/en-us/kb/2917929
Click to expand...
Click to collapse
This update has been installed for awhile now and still nothing.
HaveYouMetRandy said:
This update has been installed for awhile now and still nothing.
Click to expand...
Click to collapse
Have you checked that your bootloader is unlockable in service menu ?
Hello i wanted to root and unlock my SM-T220 and did all of that and then tried to remove the warning by overwriting up_param from termux
That resulted in bootlooping with only backlight on
Then i tried recovering using MTK SP Flash but now it only shows up as MTK usb device cant even get to bootloader, is the tablet toast?
Can you boot it to EDL?
You shouldn't have done it with Termux anyways since it was fully booted from the beginning.
sandorex said:
Hello i wanted to root and unlock my SM-T220 and did all of that and then tried to remove the warning by overwriting up_param from termux
That resulted in bootlooping with only backlight on
Then i tried recovering using MTK SP Flash but now it only shows up as MTK usb device cant even get to bootloader, is the tablet toast?
Click to expand...
Click to collapse
For now, It is toast, Are there any guides on how to unbrick it?
Someone Anyone said:
You shouldn't have done it with Termux anyways since it was fully booted from the beginning.
Click to expand...
Click to collapse
The guide said that
yngStigg said:
For now, It is toast, Are there any guides on how to unbrick it?
Click to expand...
Click to collapse
Well i followed the only guide i could find and bricked it further it seems
Only idea i have now is to open it if i can and disconnect the battery
sandorex said:
Well i followed the only guide i could find and bricked it further it seems
Only idea i have now is to open it if i can and disconnect the battery
Click to expand...
Click to collapse
Why did you not follow a guide from the beginning?
Someone Anyone said:
Can you boot it to EDL?
Click to expand...
Click to collapse
Does this tablet even have EDL? It's mediatek
yngStigg said:
Why did you not follow a guide from the beginning?
Click to expand...
Click to collapse
I did this is how i got into this but the guide screwed me over
sandorex said:
Does this tablet even have EDL? It's mediatek
Click to expand...
Click to collapse
Well most Samsung devices have one.
Disconnected the battery but its the same
I could not find any way to restart it or get anything on display it just displays as MTK Device and SP flash tool gives me an error so in the drawer it goes for now
sandorex said:
I could not find any way to restart it or get anything on display it just displays as MTK Device and SP flash tool gives me an error so in the drawer it goes for now
Click to expand...
Click to collapse
Sad
That's why I don't mod new / expensive devices, I only mod old ones.
yngStigg said:
Sad
That's why I don't mod new / expensive devices, I only mod old ones.
Click to expand...
Click to collapse
It was painfully slow but oh well maybe ill fix it someday
sandorex said:
It was painfully slow but oh well maybe ill fix it someday
Click to expand...
Click to collapse
Did you void the warranty, Yet?
yngStigg said:
Did you void the warranty, Yet?
Click to expand...
Click to collapse
I unlocked the bootloader, i've opened the device up so i think i did
Does the screen come on at all when you power it up?
If it does, put it in download mode:
Power device off completely with no cables connected
Hold both Volume buttons, do not press Power, connect USB cable from PC
Device should start in download mode
Reflash firmware using Odin
sandorex said:
I unlocked the bootloader, i've opened the device up so i think i did
Click to expand...
Click to collapse
V0latyle said:
Does the screen come on at all when you power it up?
If it does, put it in download mode:
Power device off completely with no cables connected
Hold both Volume buttons, do not press Power, connect USB cable from PC
Device should start in download mode
Reflash firmware using Odin
Click to expand...
Click to collapse
He said he can't get into bootloader soooo, This may do something tho.
yngStigg said:
He said he can't get into bootloader soooo, This may do something tho.
Click to expand...
Click to collapse
Samsung devices don't have a bootloader mode