Related
Heres the deal.
I got my hands on the walkman and whole android thing is pretty new to me,but i heard a lot of good responses about cyanogen and was wanting to instal it,but i faced some issues:
What I did: I unlocked the bootloader by following thread from sony site,loader was set to allow unlock,so this went succesfully i think.
Next a root was needed,tried several methods and nothing,then helped the one at talk.sonymobile
Hooray,SU app is in,allowed tiatnium and CWM installed sucessfully,phone is rooted.
Now I followed the tutorial from Cyanogen site.
Placed the rom and gapps in sd card,extracted the .img file to fastboot folder,everything is set,now I open the CMD promt in the fastboot folder,fastboot found the device,I hit the : ''fastboot -i 0xfce flash boot boot.img'' tried also '' fastboot flash boot boot.img'' but the cmd throws FAILED(the device must be rooted first).
What went wrong?the device is rooted already...I'm confused.Any suggestions?
and I wondered,is that cmd boot flash necessary,maybe i can install the cyanogen.zip and gapps.zip from cwm recovery console where it is said install from zip,cause the zip contains the boot.img and i was thinking,maybe it is possible to do it without the cmd thing.
gvidizz said:
Heres the deal.
I got my hands on the walkman and whole android thing is pretty new to me,but i heard a lot of good responses about cyanogen and was wanting to instal it,but i faced some issues:
What I did: I unlocked the bootloader by following thread from sony site,loader was set to allow unlock,so this went succesfully i think.
Next a root was needed,tried several methods and nothing,then helped the one at talk.sonymobile
Hooray,SU app is in,allowed tiatnium and CWM installed sucessfully,phone is rooted.
Now I followed the tutorial from Cyanogen site.
Placed the rom and gapps in sd card,extracted the .img file to fastboot folder,everything is set,now I open the CMD promt in the fastboot folder,fastboot found the device,I hit the : ''fastboot -i 0xfce flash boot boot.img'' tried also '' fastboot flash boot boot.img'' but the cmd throws FAILED(the device must be rooted first).
What went wrong?the device is rooted already...I'm confused.Any suggestions?
and I wondered,is that cmd boot flash necessary,maybe i can install the cyanogen.zip and gapps.zip from cwm recovery console where it is said install from zip,cause the zip contains the boot.img and i was thinking,maybe it is possible to do it without the cmd thing.
Click to expand...
Click to collapse
Well,for first:install the Flashtool and drivers.it is easier to use,and it will flash the boot.img either phone rooted or not.unbelivable that you people use CMDs,just like prehistorical humans
Sent from my ST15i using xda premium
gvidizz said:
and I wondered,is that cmd boot flash necessary,maybe i can install the cyanogen.zip and gapps.zip from cwm recovery console where it is said install from zip,cause the zip contains the boot.img and i was thinking,maybe it is possible to do it without the cmd thing.
Click to expand...
Click to collapse
Install the drivers from flashtool and try it with flashtool
No, on our xperia devices we have to flash the kernel first, we can't flash it via cwm
shadik555 said:
Well,for first:install the Flashtool and drivers.it is easier to use,and it will flash the boot.img either phone rooted or not.unbelivable that you people use CMDs,just like prehistorical humans
Sent from my ST15i using xda premium
Click to expand...
Click to collapse
Without CMD Flash Tool would not have been able to even flash a custom kernel as fastboot.exe requires CMD. As for your problem, dial this in your phone pad - *#*#7378423#*#*
If you have successfully unlocked your bootloader, then 'Rooting Status" will show "Bootloader unlocked: Yes" else you have not done the process properly. Make sure that you have typed the unlocked code properly. The 'o' may look like in the unlock code '0'. It is safer to copy and paste the unlock code. Also, try running CMD as administrator.
check again if u already unlocked bootloader, if bootloader unlocked:yes, u have unlocked bootloader, if bootloader unlock allowed:yes, means that ur phone can unlocked bootloader n need to unlocked
Thx
abcdjdj said:
Without CMD Flash Tool would not have been able to even flash a custom kernel as fastboot.exe requires CMD. As for your problem, dial this in your phone pad - *#*#7378423#*#*
If you have successfully unlocked your bootloader, then 'Rooting Status" will show "Bootloader unlocked: Yes" else you have not done the process properly. Make sure that you have typed the unlocked code properly. The 'o' may look like in the unlock code '0'. It is safer to copy and paste the unlock code. Also, try running CMD as administrator.
Click to expand...
Click to collapse
thank you,the first attempt for unlocking bootloader was un sucessfull.Running CMD as administrator and typing unlock code in CAPS did it.
Now im on Cyan 9.1
thx all
So,its not possible to flash a kernel using cwm? I ve been told that in cyanogenmod you already have rom and kernel in one zip and there is no need for use of flashtool...i guess i was told wrong?
Sent from my ST15i using Tapatalk 2
I think it can be done on newer phones, but on 2011 models, it can't be done, u have to flash kernel using fast boot in pc. But u do Ave the kernel in the same zip
Sent from my Xperia Mini Pro
mnishamk said:
I think it can be done on newer phones, but on 2011 models, it can't be done, u have to flash kernel using fast boot in pc. But u do Ave the kernel in the same zip
Sent from my Xperia Mini Pro
Click to expand...
Click to collapse
Thx,my friend who used that method on lg p350 told me it could be done and i thought cos my xperia is a lot newer than his device.
Sent from my ST15i using Tapatalk 2
Hi guys, after 10 hours of trying to get my P760 to life I finally, as a last resort, decided to open this threadh. Heres the deal, my friend gave me his P760 which was stuck at the boot logo, I firstly tried to fix it with LG mobile support tool but it got stuck at 15% after countless tries. Then I tried fixing it with Lg flash tool but it also gave me some errors "omap factory download fail lg p760". After that I couldnt access S/W mode anymore nor did the phone turn on, only black screen. When I connect it to my pc it just makes sounds of new device connected/disconnected. I tried this fastboot method http://forum.xda-developers.com/showthread.php?t=2292828 but couldnt make it work. Is the phone completely dead or is there anything more I can try? Any help is appreciated, thank you very much.
What was done to brick it in the first place?
Sent from my KYOCERA-C6745 using Tapatalk
I am not sure, my friend brought it to me and he didnt know the reason. Anyway I managed to get into fastboot on another computer and i tried to flash x loader and uboot with the bulit in options and i get the following error "FAILED (remote partition doesnt exist). What can I do next? Thank you for the reply.
EDIT I have tried to get the phone in S/W mode using this guide http://forum.xda-developers.com/showpost.php?p=44325657&postcount=4 but I couldnt do it.
I am sure I have to flash something in fastboot so it would be great if someone could point me to exactly what. Thanks again.
EDIT 2 I tried to flash xloader and u boot from post #7 http://forum.xda-developers.com/showthread.php?t=2242444 and it gave me the remote partition error failed again. Is the phone "officially" dead?
My experience with this phone is that it is basically unbrickable, at least software wise, thanks to omap4boot. Fastboot is basically telling you the partition you specified doesn't exist. Check you are using the correct syntax. It should be fastboot flash u-boot u-boot.img and fastboot flash x-loader x-loader.img (I am assuming the files are named u-boot.img and x-loader.img).
Another possibility is that the partition table of the phone somehow got corrupted. In my opinion this is very unlikely, but it could happen if the phone is disconnected while flashing the GTP table with LGFlashTool. Let's hope that's not the case.
Good luck.
@EdwinMoq thanks for the reply. I checked and I was using the correct syntax altough the files were named p1 and p2 both in bin format so I typed fastboot flash u-boot p1.bin and p2.bin respectively. Ive just noticed that they are from ICS and I am not sure what android version was installed prior to the brick. Can you point me where to find the JB files so I can try them if it makes any difference.
Maha23 said:
@EdwinMoq thanks for the reply. I checked and I was using the correct syntax altough the files were named p1 and p2 both in bin format so I typed fastboot flash u-boot p1.bin and p2.bin respectively. Ive just noticed that they are from ICS and I am not sure what android version was installed prior to the brick. Can you point me where to find the JB files so I can try them if it makes any difference.
Click to expand...
Click to collapse
I don't think the u and x boot version makes any difference. The fastboot script here comes with with the files for both p760 and p769. Or you can ask a p760 user with the jb boot to dump them and post it here.
EdwinMoq said:
I don't think the u and x boot version makes any difference. The fastboot script here comes with with the files for both p760 and p769. Or you can ask a p760 user with the jb boot to dump them and post it here.
Click to expand...
Click to collapse
Well using that script was the first thing I did after I couldn access S/W mode and I got the partition error, I tried both ICS and JB. Well it would be great if someone could dump their JB boot so I can try that, if it doesnt work I guess Ill throw the phone away
Maha23 said:
Well using that script was the first thing I did after I couldn access S/W mode and I got the partition error, I tried both ICS and JB. Well it would be great if someone could dump their JB boot so I can try that, if it doesnt work I guess Ill throw the phone away
Click to expand...
Click to collapse
I'm seeing you using lelus method to fastboot...
1) Be sure you are in fastboot whith this command: fastboot devices
2) if the l9 is still in lg logo, just flash a recovery img into boot and recovery partition:
a) fastboot flash boot recovery.img
b) fastboot flash recovery recovery.img3)reboot the device, it must enter in recovery mode by force.
4) once in recovery just flash a custom rom as you wish
Yes i am using lelus method and I see the device when I enter fastboot devices, the phone wont turn so there is no lg logo and I can not enter S/W mode. Where can I find the recovery.img and boot.img ?
EDIT Okay I tried this too http://forum.xda-developers.com/showthread.php?t=2585161 but when I issue the erase command it just gives me the remote partition error again. The chances that this is a hardware issue are pretty big.
Sent from my LG-D855 using XDA-Developers mobile app
A few tricks that might help:
-After a failed attempt to enter D/L mode via the volume key, force hard reset. Then switch on phone for an extra time and perform the hard reset again. This really makes a difference.
-If after unbricking the phone with a stock rom the puny LG recovery dialog resides on screen, perform the stock rom installation for a second time, phone should perform a normal boot then. Otherwise there's trouble with rooting and TWRP installation later.
-Fastboot still does not work for me(all?) in Win10, as it didn't in Win8.1,but did in Win7.
The only method to go on seems to root stock rom with Kango Root or a similar tool, then install Twrp, with Rashr or flashify.
lecorbusier said:
A few tricks that might help:
-After a failed attempt to enter D/L mode via the volume key, force hard reset. Then switch on phone for an extra time and perform the hard reset again. This really makes a difference.
-If after unbricking the phone with a stock rom the puny LG recovery dialog resides on screen, perform the stock rom installation for a second time, phone should perform a normal boot then. Otherwise there's trouble with rooting and TWRP installation later.
-Fastboot still does not work for me(all?) in Win10, as it didn't in Win8.1,but did in Win7.
The only method to go on seems to root stock rom with Kango Root or a similar tool, then install Twrp, with Rashr or flashify.
Click to expand...
Click to collapse
Thanks for the reply. How do I perform the force hard reset? Yes, I couldnt get fastboot to work on win 10, on win 7 it works flawlessly.
Sent from my LG-D855 using XDA-Developers mobile app
Hello,
I have exactly the same problem with my p760, fastboot works so far but remote partition error and the phone stays always completely black.
Is there someone who has a new idea to fix it?
Hey,
I found this: http://massimoronca.it/2016/03/17/fastboot-failed-remote-partition-does-not-exist.html
but i dont really understand it, can someone help me?
Maha23 said:
Yes i am using lelus method and I see the device when I enter fastboot devices, the phone wont turn so there is no lg logo and I can not enter S/W mode. Where can I find the recovery.img and boot.img ?
EDIT Okay I tried this too http://forum.xda-developers.com/showthread.php?t=2585161 but when I issue the erase command it just gives me the remote partition error again. The chances that this is a hardware issue are pretty big.
Sent from my LG-D855 using XDA-Developers mobile app
Click to expand...
Click to collapse
readme again... try to flash a recovery.img into the boot partition
fastboot flash boot recovery.img
and then reboot... this foce the l9 to enter in recovery and then you can fotmat partitions in wipe options
---------- Post added at 08:55 PM ---------- Previous post was at 08:52 PM ----------
Elsewhere you must need a technician with a box like octopus box to recompone ESD partitions of the L9 phone
Hard reset is 10s power.
Such a swap of recovery and kernel could have happened after unbricking the phone, when the key combo for fastboot produces the LG recovery. That's why I flash stock twice, then it's right again & ready to root, install TWRP etc.
Thanks for the help guys, I tried everything possible...I think I did, but the phone just wouldnt unbrick so it is going into parts. Thanks again.
Maha23 said:
Thanks for the help guys, I tried everything possible...I think I did, but the phone just wouldnt unbrick so it is going into parts. Thanks again.
Click to expand...
Click to collapse
you must need a technician with a box like octopus box to recompone ESD partitions of the L9 phone
puntoazul said:
fastboot flash boot recovery.img
Click to expand...
Click to collapse
Srsly?
recovery partition image on boot?
Probably true. That would explain the strange behaviour of the key combos during boot, after unbricking the phone for the first time. The recovery has replaced the kernel, but the phone can still boot. Strange. Fastboot is unavailable, and the key combo for the recovery shows the "dead droid" and performs a factory reset.
Groszexxx said:
Srsly?
recovery partition image on boot?
Click to expand...
Click to collapse
Yes... is an effective method to boot by forced on TWRP or other recovery and then proceed to format all partitions and flash any rom consecutively. After flashing any rom the boot partition is rewrited by the boot.img of the rom.
I did this before on my own L9 for repair and other friends devices. Is totally safe
By the way, I'm not in warn
Hi guys!
I´m kinda desperate right now. I ****ed up and when drunk I uninstalled OxygenOs and tried to update my recovery and I bricked my phone.
The phone right now can´t boot into the recovery (Volume down + power does nothing) but I can boot into fastboot mode. Also booting normally does nothing since no OS is installed.
Is there any way/guide to maybe solve this? I tried to follow the Hard Unbrick guide but can´t make it work (The pressing volume up step does nothing).
I apologize in advance because I imagine that this might already be posted by other people.
Thank you in advance,
craked5!
Just simply:
1.boot into fastboot mode
2. Download Recovery eg. TWRP
3. Connect phone to pc
4. In command line type (make sure you have fastboot drivers installed)
fastboot flash recovery recovery.img
recovery.img must be the name of your recovery file name.
After that you have working recovery
This is a link to both unbrick mini and full with some instructions.
https://goo.gl/zYnkQ1
What if the bootloader was never unlocked and you are in the same situation? A friend sent me his plus X to see of I could get it going again. It can only boot to fastboot. No recovery, and apparently no OS. I'm not even sure what they wetter trying to do with the device since he is not that savvy with adb or fastboot. . I just want to get the device back to stock for him.
I ran the command "fastboot oem device-info" and from what I can see the bootloader was never unlocked.
Sent from my A0001 using XDA Premium HD app
glockman4519 said:
What if the bootloader was never unlocked and you are in the same situation? A friend sent me his plus X to see of I could get it going again. It can only boot to fastboot. No recovery, and apparently no OS. I'm not even sure what they wetter trying to do with the device since he is not that savvy with adb or fastboot. . I just want to get the device back to stock for him.
I ran the command "fastboot oem device-info" and from what I can see the bootloader was never unlocked.
Sent from my A0001 using XDA Premium HD app
Click to expand...
Click to collapse
Mega Unbrick Guide is your only option....
That's what I thought. It's toast then...lol.. My guess is someone didn't check the OEM unlock switch in developers options and then tried following some guide some where. These phones are so easy to work with. But to screw this device up this bad is messed up. Thanks for your help.
Hi everyone
I flashed my LG MAGNA H500TR with H50220a software and now cant flash back even I have the kdz file for proper software.
I tried lgup but it shows phone is as H50220a and giving error and says 'You have to select a known model,please'.
Also tried lg flash tool 2014 but result is 'Required info cannot be found' 'Contact the system administrator'
And lastly tried flash tool 2016 but this time it says wrong dll.
I havent find any solution for this for couple of years so far. The phone just stays bricked on the box.
Waiting your helps.
Best regards....
ByCannn60 said:
Hi everyone
I flashed my LG MAGNA H500TR with H50220a software and now cant flash back even I have the kdz file for proper software.
I tried lgup but it shows phone is as H50220a and giving error and says 'You have to select a known model,please'.
Also tried lg flash tool 2014 but result is 'Required info cannot be found' 'Contact the system administrator'
And lastly tried flash tool 2016 but this time it says wrong dll.
I havent find any solution for this for couple of years so far. The phone just stays bricked on the box.
Waiting your helps.
Best regards....
Click to expand...
Click to collapse
Did you try this https://flashstockrom.com/how-to-flash-stock-firmware-on-lg-h500tr-magna-y90/?
Is your device bootloader unlocked? Can you enter to fastboot and recovery?
[/QUOTE]
Is your device bootloader unlocked? Can you enter to fastboot and recovery?[/QUOTE]
I can enter download mode but phone seen as different model because I flashed wrong firmware. When I use original lg application it does see the phone and can flash new update but when procedure done it's not changed the version. I tried to trick the app by replacing kdz file with h500tr .kdz but result was not working.
SubwayChamp said:
Is your device bootloader unlocked? Can you enter to fastboot and recovery?
Click to expand...
Click to collapse
I checked that website and it gives solutions but the files not compatible with h500tr cuz the post about g3 or some other models. I dunno if it work common but since spesific ı didn't try actually
ByCannn60 said:
I checked that website and it gives solutions but the files not compatible with h500tr cuz the post about g3 or some other models. I dunno if it work common but since spesific ı didn't try actually
Click to expand...
Click to collapse
Use this procedure as reference but with the proper files for your device.
In fastboot you can try flashing all the partitions as possible;
- First delete to be sure a partition and then flash this partition, normally fastboot flashing overwrites the partition but to be sure procede this way; for example type first
Code:
fastboot erase boot
and then type
Code:
fastboot flash boot boot.img
and so on, one by one all the possible files that you will find inside the rom.
And in recovery if you find some OTA update probably you can update the zip through it.
SubwayChamp said:
Use this procedure as reference but with the proper files for your device.
In fastboot you can try flashing all the partitions as possible;
- First delete to be sure a partition and then flash this partition, normally fastboot flashing overwrites the partition but to be sure procede this way; for example type first
Code:
fastboot erase boot
and then type
Code:
fastboot flash boot boot.img
and so on, one by one all the possible files that you will find inside the rom.
And in recovery if you find some OTA update probably you can update the zip through it.
Click to expand...
Click to collapse
can u be more spesific I think I need some files to do that where can I get them?
ByCannn60 said:
can u be more spesific I think I need some files to do that where can I get them?
Click to expand...
Click to collapse
You can extract the files from your kdz rom using this method and tool https://androidmtk.com/extract-kdz-firmware then you can both use the files that I mentioned and also replace conveniently some files like probably dll that gave you error before and then repack the rom and flash it so.
SubwayChamp said:
You can extract the files from your kdz rom using this method and tool https://androidmtk.com/extract-kdz-firmware then you can both use the files that I mentioned and also replace conveniently some files like probably dll that gave you error before and then repack the rom and flash it so.
Click to expand...
Click to collapse
I tried to enter fastboot but my phone just not enters only goes to download mode how can I solve that too.
I would like to ask u a favour. Could u please do it on my pc via Teamviwer? I think Im kinda lost on those informations and cant get it right.
ByCannn60 said:
I tried to enter fastboot but my phone just not enters only goes to download mode how can I solve that too.
I would like to ask u a favour. Could u please do it on my pc via Teamviwer? I think Im kinda lost on those informations and cant get it right.
Click to expand...
Click to collapse
Ok, download the tool linked and the rom unzipped/extracted and get them ready on a same folder on desktop just to have the things clear and I´ll sparse some time in a couple of hours maybe in 4 hours.
While try to perform other different ways to enter to fastboot so I can´t do this remotely, it´s mean usually to enter to download mode is vol down while connecting to pc and I guess that reversing for vol up while connecting to pc you get recovery cause from recovery also you can send device to bootloader/fastboot mode by using the menu and charge the battery well.
SubwayChamp said:
Ok, download the tool linked and the rom unzipped/extracted and get them ready on a same folder on desktop just to have the things clear and I´ll sparse some time in a couple of hours maybe in 4 hours.
While try to perform other different ways to enter to fastboot so I can´t do this remotely, it´s mean usually to enter to download mode is vol down while connecting to pc and I guess that reversing for vol up while connecting to pc you get recovery cause from recovery also you can send device to bootloader/fastboot mode by using the menu and charge the battery well.
Click to expand...
Click to collapse
Since partions messed up cant reach anything out of download mode. I will prepare the files as u wish waiting news from u.
ByCannn60 said:
Since partions messed up cant reach anything out of download mode. I will prepare the files as u wish waiting news from u.
Click to expand...
Click to collapse
I´m not sure if I can help you since you can´t enter to fastboot mode but if you already want to try it.
SubwayChamp said:
I´m not sure if I can help you since you can´t enter to fastboot mode but if you already want to try it.
Click to expand...
Click to collapse
Thanks even for your effort mate. I think last chance is having it serviced from an LG service :good:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
you should have flashed vbmeta.img so that you don't get in bootloop
You mean your phone wouldn't go into bootloader by "Vol. down button + power button" holding from power off state?
T59y9 said:
fastboot flash magisk_patched.img
Click to expand...
Click to collapse
Do you mean "fastboot flash recovery magisk_patched.img"??
the correct command is fastboot flash boot magisk_patched.img
Maybe he wrote fastboot flash magisk_patched .img
but I think it would have returned an error
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
Maybe the rom you downloaded and the base rom running on your device is not the same version, that may cause the error. {Mod edit}
@T59y9
Hi
did you solve in some way?
My realme 7 5G is not rooted.
Just arrived me friday, I udated to new firmware trought recovery. After the reboot did not woke up anymore.
Black screen. no realme logo. nothing.
tried all button combinations, nothing. no boot, no logo, recovery, no fastboot.
tried also with charger attached, with usb on PC.
Nothing...
Any idea to solve my problem?
thank you.
how did you unlock the bootloader?
in depth test app says my model does not support in-depth test
if you are asking me, I did not unlock anything.
just flashing new OS update trought recovery. after that device dead. not buttons combinations to get fastboot or anything else...
gannjunior said:
if you are asking me, I did not unlock anything.
just flashing new OS update trought recovery. after that device dead. not buttons combinations to get fastboot or anything else...
Click to expand...
Click to collapse
oh sorry
any idea how to solve?
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
same anyone know how to solve this pls :/
First you all. Say the Model Number. You talk about Realme 7/Pro or 5G...
This issues is fixable. Just need extra tools to bypass Google FRP and a factory images ROM versions. Fixed few devices with the same situation!
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
did you find soultion of this at now because i also have same problem?
I've done the same thing I accidently typed "fastboot flash recovery magisk_patched.img" and now I cannot get out of the boot loop as there is no way due to messed up recovery + boot. I have been reading about finding and downloading a firmware in zip format that can be flashed with "SP Flash Tool" but when I try I cannot get it to work. The Firmware should be for the Realme 7 5G [RMX2111].
If anyone else can figure it out.... Please help!
martinbrettphilo said:
I've done the same thing I accidently typed "fastboot flash recovery magisk_patched.img" and now I cannot get out of the boot loop as there is no way due to messed up recovery + boot. I have been reading about finding and downloading a firmware in zip format that can be flashed with "SP Flash Tool" but when I try I cannot get it to work. The Firmware should be for the Realme 7 5G [RMX2111].
If anyone else can figure it out.... Please help!
Click to expand...
Click to collapse
It'll be kinda hard. You're gonna have to find a stock ROM - not an OTA update - and you're gonna need to use python to extract the contents from the .OFP file. This should be it. https://firmwarefile.com/oppo-realme-7-5g-rmx2111
basically you can follow this tutorial
the only difference is you have to use realme 7 firmware not C3. this is ofp file for rmx2151 you can extract it with ofp extractor. also I link this guide for RMX2155. its bootloader unlock guide for RMX2155, but you also follow that guide to revive RMX2151 (until step 10 is sufficient, unless you want unlocked bootloader too)
SF Flash tool is a quite useful for flashing/unbrick Mediatek phones. just read instruction more carefully from now
immns said:
basically you can follow this tutorial
the only difference is you have to use realme 7 firmware not C3. this is ofp file for rmx2151 you can extract it with ofp extractor. also I link this guide for RMX2155. its bootloader unlock guide for RMX2155, but you also follow that guide to revive RMX2151 (until step 10 is sufficient, unless you want unlocked bootloader too)
SF Flash tool is a quite useful for flashing/unbrick Mediatek phones. just read instruction more carefully from now
Click to expand...
Click to collapse
good. this for Realme 7 :
- Textguide : https://telegra.ph/Hard-Brick-Fix-for-Realme-7-01-25
hello guys, i'm having a problem here, I just installed a pixel plus ui and then installed the magisk app, then I renamed it to a zip file as mentioned in the website and went to flash it on my phone (Realme 7) after flashing successfully completed I pressed the reboot to system option, now it's stuck on the realme logo and doesn't budge anymore... I'm really worried please help me.