Hello! How can I unbrick my Mediatek phone?
I have tryed to use SP tool but i need a scatter so i tryed to create a scatter using adb (because i can't use debug mode, my phone is bricked) but the adb terminal say "error: closed" when I type "adb shell"
Someone can help me? Plz
Thanx :*
MY PHONE :THL 4000 (Mediatek 6582)
You can only make a scatter file when your phone is not bricked...
popthosegaskets said:
You can only make a scatter file when your phone is not bricked...
Click to expand...
Click to collapse
Can I use this scatter file for my phone??? (attached file)
I tryed to use him ( I followed this tutorial: https://www.youtube.com/watch?v=hKYH7gkvrvY ) but I have this problem: http://forum.xda-developers.com/android/general/help-unbrick-sp-flash-tool-initialize-t3114328
I have 0 reply...
Remove the underscore from the file name and try again.
popthosegaskets said:
Remove the underscore from the file name and try again.
Click to expand...
Click to collapse
I tryed to remove the underscore and also rename the file "abc.txt" but it didn't work... I have always this error: http://forum.xda-developers.com/android/help/help-unbrick-sp-flash-tool-initialize-t3114328 :/
Can you try to load these scatter on your SP tool? I think it didn't work only on my pc, can you test on your?
Do you have other idea that I can do for unbrick my phone?
I'm not at my computer now. As for the scatter file, you might want to try chinaphonearena to see if they have an original scatter for your phone.
popthosegaskets said:
I'm not at my computer now. As for the scatter file, you might want to try chinaphonearena to see if they have an original scatter for your phone.
Click to expand...
Click to collapse
I tryed his scatter and others too: don't work. I tryed also scatter for others phones models but noone works
just dwnld the ltest version of flshtool
Related
Help me please. I'm trying to use sp flash tool and it will not work. I have tried on windows 8 and 7. When I add a scatter file it doesn't show the right numbers instead they are all zeros? So then it doesn't work right with the phone. Please help me!
My chinese phone Galaxy GT-N9000 clone Mtk6572 was brick, i try almost every tutorial and rom from many forum but still i can't bring my phone back to life ... please there anyone can help me? :crying: :crying: :crying: :crying:
Korean Clone Version Note 3
ijal7785 said:
My chinese phone Galaxy GT-N9000 clone Mtk6572 was brick, i try almost every tutorial and rom from many forum but still i can't bring my phone back to life ... please there anyone can help me? :crying: :crying: :crying: :crying:
Click to expand...
Click to collapse
- Mine is N9000 Note 3 Korean Clone Version MTK6572, and i'm wondering if theres a way to root it. i know there's a lot of android professionals here, and i hope we can find some answers.
- Version 4.3 jellybean
- Baseband Version: MTK6572 MAUI.11AMD.WW1150.SP. V23
- Kernel 2.6.35.7 [email protected] #4
- Software Version: JSS15J.N900ZSUBMI5
- Hardware Version: 1.1.0
Base on CPU Identifier:
- Spreadtrum SC6820a 1000 Mhz
- (fingerprint Brand for Fake Samsung Market)
- SMDK4X12
- Mali-300
Answer
ijal7785 said:
My chinese phone Galaxy GT-N9000 clone Mtk6572 was brick, i try almost every tutorial and rom from many forum but still i can't bring my phone back to life ... please there anyone can help me? :crying: :crying: :crying: :crying:
Click to expand...
Click to collapse
There is no support for chinese devices anywhere.
The tutorials are made only for the original device.
Did you back up the stock rom in the first place?
This problem would have been solved if you had a backup of your stock rom.
Now you have no other go than to contact the manufacturer for getting the phone fixed.
Trying other roms will not help you in restoring.
ijal7785 said:
My chinese phone Galaxy GT-N9000 clone Mtk6572 was brick, i try almost every tutorial and rom from many forum but still i can't bring my phone back to life ... please there anyone can help me? :crying: :crying: :crying: :crying:
Click to expand...
Click to collapse
try this >
- install ABD Drivers MTK65xx on your pc
- install SP Flash Tools
- download a custom ROM from needrom BUT only for your model N9000, other ROM will be useless
now extract the new ROM and let the window open after extraction
- open SP Flash Tools and load the scatter img file ( is in the extracted folder, navigate to that folder and load the scatter text img file )
- turn your phone off, wait until it vibrates to be sure is off
- press Download button on SP Flash Tools and after 1 sec connect your phone to PC
you'll the Flashing process Start, wait until is finish, it may take more than 10 min in some cases... you'll see a green circle after the process is done
- disconnect your phone and Power On, Voilaa
NovelCaidy said:
- Mine is N9000 Note 3 Korean Clone Version MTK6572, and i'm wondering if theres a way to root it. i know there's a lot of android professionals here, and i hope we can find some answers.
Click to expand...
Click to collapse
use Shuame or Framaroot, if u need help, i'm here...
Guys anybody got a rom for thje same phone...I have it too and its bricked..nothing is working
Ahh!!
Today I faced Same Problem With Same Model But Lots Of Effort Finally I Have Done .
My Working ROM : https://drive.google.com/uc?id=0B35LZs4cp74ZYlRYUnhpejUyZFE
Regards,
filip_pine said:
try this >
- install ABD Drivers MTK65xx on your pc
- install SP Flash Tools
- download a custom ROM from needrom BUT only for your model N9000, other ROM will be useless
now extract the new ROM and let the window open after extraction
- open SP Flash Tools and load the scatter img file ( is in the extracted folder, navigate to that folder and load the scatter text img file )
- turn your phone off, wait until it vibrates to be sure is off
- press Download button on SP Flash Tools and after 1 sec connect your phone to PC
you'll the Flashing process Start, wait until is finish, it may take more than 10 min in some cases... you'll see a green circle after the process is done
- disconnect your phone and Power On, Voilaa
use Shuame or Framaroot, if u need help, i'm here...
Click to expand...
Click to collapse
Hi, thanks for your help, but the phone is still bricked.
When i try to switch power on, nothing happen :crying:
If i push volume button, up or down i can see appear and disappear on device manager the ALCATEL SINGLE RNDIS SINGLE INTERFACE #5 but never MT65xx Preloader driver. :crying:
Seems to be not full dead but i don't know what else i can do.
If you have an advice for us with bricked phone...will be much appreciated.
Very thank you for any help kind. :crying:
D4N13L0N3 said:
Hi, thanks for your help, but the phone is still bricked.
When i try to switch power on, nothing happen :crying:
If i push volume button, up or down i can see appear and disappear on device manager the ALCATEL SINGLE RNDIS SINGLE INTERFACE #5 but never MT65xx Preloader driver. :crying:
Seems to be not full dead but i don't know what else i can do.
If you have an advice for us with bricked phone...will be much appreciated.
Very thank you for any help kind. :crying:
Click to expand...
Click to collapse
you need to install proper driver in order for the PC to recognize the phone, ussualy the Preloader USB VCOM Driver does the job, sometime it takes much more effort, and ADB Drivers need to be installed...
- Proper way to install Preloader USB VCOM Driver -
Connect your phone to PC and wait for the New hardware Found wizzard to appear
Choose i will install the driver by myself, then navigate to the folder location were you have the .ini driver file...
- If the method above dont work, then connect your phone to PC, wait for the New hardware found to appear...
Then right click on My PC and go to the Device Manager
Here you should have a yellow Mark and a phone name or something like this
Right click and choose update driver
Now choose the folder where you have extract the .ini driver file ....
Restart your PC
Open SP FlashTools and be sure that u have the proper ROM for your Phone, otherwise you´ll face DRAM FAIL Error
try this ROM that the guy posted above...
https://drive.google.com/uc?id=0B35LZs4cp74ZYlRYUnhpejUyZFE
filip_pine said:
you need to install proper driver in order for the PC to recognize the phone, ussualy the Preloader USB VCOM Driver does the job, sometime it takes much more effort, and ADB Drivers need to be installed...
- Proper way to install Preloader USB VCOM Driver -
Connect your phone to PC and wait for the New hardware Found wizzard to appear
Choose i will install the driver by myself, then navigate to the folder location were you have the .ini driver file...
- If the method above dont work, then connect your phone to PC, wait for the New hardware found to appear...
Then right click on My PC and go to the Device Manager
Here you should have a yellow Mark and a phone name or something like this
Right click and choose update driver
Now choose the folder where you have extract the .ini driver file ....
Restart your PC
Open SP FlashTools and be sure that u have the proper ROM for your Phone, otherwise you´ll face DRAM FAIL Error
try this ROM that the guy posted above...
Click to expand...
Click to collapse
Thanks, i tried your guide, but with that ROM finaly appear 100% in red color, probably because this phone have MTK6582 and not 6572.
If i use a rom for 6582 at the end of process i can see the DRAM FAIL error
I use this link from XDA for that ROMs:
androidxda.com/download-hdc-stock-rom-models
Any other advice ????
Thanks
D4N13L0N3 said:
Thanks, i tried your guide, but with that ROM finaly appear 100% in red color, probably because this phone have MTK6582 and not 6572.
If i use a rom for 6582 at the end of process i can see the DRAM FAIL error
I use this link from XDA for that ROMs:
androidxda.com/download-hdc-stock-rom-models
Any other advice ????
Thanks
Click to expand...
Click to collapse
ok, take your battery out and tell me the exact model...
filip_pine said:
ok, take your battery out and tell me the exact model...
Click to expand...
Click to collapse
Model: SM-N9000
SSN : N9000GSMH
Made in Korea by Samsung
filip_pine said:
ok, take your battery out and tell me the exact model...
Click to expand...
Click to collapse
This is model:
D4N13L0N3 said:
This is model:
Click to expand...
Click to collapse
try this ROM´s... maybe one of them will make your phone alive ...
http://www.needrom.com/mobile/11-hdc-n9000-note-3/
http://www.needrom.com/mobile/hdc-note-3-mt6582-sm-n9006/
http://www.needrom.com/mobile/hdc-galaxy-note-3-mtk6582-1gb-4gb-2014-kernel/
filip_pine said:
try this ROM´s... maybe one of them will make your phone alive ...
Click to expand...
Click to collapse
Thanks.
I will try, then i tell you if i can use like a paper block
filip_pine said:
try this ROM´s... maybe one of them will make your phone alive ...
Click to expand...
Click to collapse
Nothing, or i mistake all and fail, or i miss some important step.
In attached the errors :
D4N13L0N3 said:
Nothing, or i mistake all and fail, or i miss some important step.
In attached the errors :
Click to expand...
Click to collapse
did u get this error on all the 3 ROM´s ? (((
is there any chance that u can contact your seller from where did you bought the phone ? ask him for the Original ROM...
filip_pine said:
did u get this error on all the 3 ROM´s ? (((
is there any chance that u can contact your seller from where did you bought the phone ? ask him for the Original ROM...
Click to expand...
Click to collapse
No, not all, but everyone go on 100% with red line and not green circle.
I don't understand what error i made.
I think one thing, but the AGENT is right MTK_AllOne_DA.bin or i need to use the one in FIRMWARE folder ??
The files are :
lk.bin
logo.bin
preloader_lcsh82_wet_jb5.bin
What do you thing about it ???
Hi Filip,
i tried to delete USB drivers with USB Deview, after that, i re-charge a new one driver of device and then charge the ROM, this is the result :
The second image appear after about 15 minutes of time out.
D4N13L0N3 said:
Hi Filip,
i tried to delete USB drivers with USB Deview, after that, i re-charge a new one driver of device and then charge the ROM, this is the result :
The second image appear after about 15 minutes of time out.
Click to expand...
Click to collapse
ok, it seems that the problems are not the driver, sience you manage to get the phone recognized by pc... the problem seems to be SP Flash Tool...
my advice would be : reinstall again the windows, install again the USB Preloader VCOM Driver ( the correct way ) and install latest version of SP Flash Tool....
Then try to install again one of the 3 ROM´s that i give you... maybe you have luck buddy, i dont know...
is the only way you could get back your phone.... as you know, these phones are clones and is very hard to find compatible ROM´s and replacements parts....
I was having the ghost touches on my SM-N900 Note 3 Clone and the only solution was to change the digitizer, but : i can´t change it, sience i dont find anywhere Note 3 Clone digitizer replacements... only solution was to put the phone in a box and dont use it... ((
filip_pine said:
my advice would be : reinstall again the windows, install again the USB Preloader VCOM Driver ( the correct way ) and install latest version of SP Flash Tool....
Click to expand...
Click to collapse
I tried on my laptop with new OS installed and no antivirus installed, but the problem is the same.
I tried this tools : SP_Flash_Tool_v5.1352.01
and this : SP Flash Tool v3.1332.0.187
and the tools inside the ROM folder, but nothing. :crying:
Could you link me please the USB Preloader VCOM Driver ( for win7 64bit ), i guess the problem is that i used the bad one
Very thank you again for your help. :good:
Hi, I was trying to use Flash tool and Don't know what happend but My Phone is completely DEAD right now even power button is also not working no screen is there (just blank phone).
I am having UMI X2 2GB rom, 32 gb internal memory, 1.5 GHZ (MT6589T) Model.
I tried to use SP Flash tool to recover my phone. Firstly I tried to format the phone, After that I tried to run the correct scatter file for MT6589 (from one of the ROM Posted under UMI-X2).
Drivers for the SP Flash tool is loaded correctly (into my Windows 8 Pc). I was previosly getting error as follow : SP FLASH TOOL ERROR: (8200)
[Platform Error] The load and target are inconsistent!
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Thanks in advance!
- Umang
umang_nine said:
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Click to expand...
Click to collapse
Try this version of :
SP Flash Tool
October Official Rom
USB Drivers (if needed)
Works for me.
Necro thread...
I have the same issue.
A couple of days ago the phone just started turning off / locking up when off, and having great difficulty tuning on... i.e. pulling out the battery for a minute or a few times.
Now the phone won't turn on at all. They only sign of life is the charging animation when you plug it in.
Prior to all this, there appeared a window in Chinese with some options. my GF (who's phone it is) just pressed something, no idea what. But she said something about 'drawing on the screen'??? sound like something locked up and the previous frame wasn't deleted from the frame buffer before redrawing the new one... I have no idea.
Anyway, I tried going into recovery to see if there was anything I could do there, unfortunately everything was in Chinese, so not much help. for some reason now, the recovery isn't even working.
Now I can connect to the phone via SPflash, but I get the above response: '[Platform Error] The load and target are inconsistent!'
Some other ROMs I tried give me this response:
'The load to be downloaded is for MT6589;
The target platform is MT6582_S00'
Which is quite suspicious.
Any ideas?
Thanks
hisense HS-U980 bricked....
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Hs-u980 complete dead/bricked
carretto76 said:
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Click to expand...
Click to collapse
i have ur same phone and i have ur same problem,my pkone is dead later flash any wrong miui rom from cwm recovery and now is dead,i dont have any idea where is original firmware for sp.flash tool or other how piranha box,please,anyone can please me??? THANK U for read!!!!
I have the same Problem. So frustrating men. If anyone finds a solucion please email me [email protected] ...
SP FLASH TOOL ERROR: (8200)
As i connect my phone it disconnects after 2 seconds..
Please give me a site to download scatter file for my micromax a 310
Hi have bricked my THL 4000 with an update.
I try now to unbrick my phone.
I have installed the driver on my pc but i can't use the SP flash tool :/
SP flash tool say: " Error: Initialize scatter file failed. Please check the scatter file name you load is legal "
I don't understand why it say it... I use the original scatter file from needrom.com
I have tryed a lot of version of SP flash tool and also other scatter file but i have always the seam error :/
PLZZZZZ HELLLLPPPPP
I can't flash anything using recovery mode because it say : "Invalid OTA package, missing scatter"
I don't know what i can do for unbrick my phone: I have an error if I use SP flash tool and also if I use recovery mode.
Help me for unbrick my phone
TY community XDA
Some one are trying to help me here: http://forum.xda-developers.com/android/help/how-unbrick-chinese-phone-t3116406#post60956102
These thread can help you if you have my problem. (unsolved problem :/ but try to follow the instructions on the link... it can help you to solve your problem )
hello..
i was trying to root and install cwm.. and i unfortunately installed the wrong recovery now my phone does not start.. not even in recovery mode..
it shows a messege "Download and install package...........etc. press volume up to proceed down to cancel" pressing the keys don't do any thing phone gets off after a while.. i have a backup of stock recovery and boot but i think both files are same its 20mb both.. i had used Flashify to backup. and i can't even enter fastboot my pc does not detect my phone perhaps because i don't have the drivers... is it possible to fix my phone or its dead for ever..:crying::crying::crying::crying::crying::crying::silly::silly::crying:
i was following this method here.. www[dot]gizdev[dot]com/easy-way-to-root-coolpad-dazen-1/
same problem here
same problem here I try all method from google but I can't my suggestion to go service centre
fixed dazen 1
m.sajid969 said:
same problem here I try all method from google but I can't my suggestion to go service centre
Click to expand...
Click to collapse
Hey.. I have fixed my dazen 1 you can do so... Its easy.. Head to the following thread...
http://forum.xda-developers.com/che...g-boot-img-recovery-img-t3170809#post62587856
New thread..
http://forum.xda-developers.com/showthread.php?t=3236337
can we use custom recovery of same chipset phones
Hey guys,
Yureka Yunique and Yuphoria have same chipset as Coolpad Dazen 1 4g. So can we port their custom recoveries or custom rom into coolpad.??
Is there a tool or way to take full backup of Coolpad Dazen 1 4g like, boot.img, recovery.img, system.img, all radio related and other things??
Hi ,
i am trying to install ROM for coolpad dazen 1 i was selected wrong ROM ,so now my Mobil not working, not starting if u press any and at list it not recognize USB .if i connect USB it not identifying ,,plz any now to solution give me
thanks friends
modem soft bricked
Sir please help me..
I have tried volt modem of other phone. so my mobile modem was soft bricked then I tried non vote modem of yureka then my phone not detecting both sim cads sir please help me.... help me please ..please...
Shivakdl66 said:
Sir please help me..
I have tried volt modem of other phone. so my mobile modem was soft bricked then I tried non vote modem of yureka then my phone not detecting both sim cads sir please help me.... help me please ..please...
Click to expand...
Click to collapse
Same problem I faced ..
1 month ago ...
Solution :--
Flash the original stock ROM(1.1gb) with PC
RAGHAV RT said:
Same problem I faced ..
1 month ago ...
Solution :--
Flash the original stock ROM(1.1gb) with PC
Click to expand...
Click to collapse
Thanks I did it successfully.
Shivakdl66 said:
Thanks I did it successfully.
Click to expand...
Click to collapse
Ok bro
Solution
I have a solution of dead coolpad phones
I know phone is not detect in pc
So I made one boot disk to solve this its work 100%
And you phone will be revert back to its factory versions .
Solution 123 said:
I have a solution of dead coolpad phones
I know phone is not detect in pc
So I made one boot disk to solve this its work 100%
And you phone will be revert back to its factory versions .
Click to expand...
Click to collapse
If you really have solution then share it to others. It may help them to revive their android.
In my coolpad dazen 1 when I was try to flash new software it stop at 11%. What should I do? Plz help me. I tried both stock room software.
bricked my coolpad dazen 1
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
got it working
devendra singh panwar said:
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
Click to expand...
Click to collapse
i have managed to get my coolpad dazen 1 back to life.what i have done is flash different partition with fastboot.
if ur coolpad boots in download mode and secure phone is written and cant be flashed with ygdp tool.there this method is applicable.
like fastboot flash (partition) (file name) .for example "fastboot flash system system.img".if u r confused let me explain widely-
1.I have coolpad stock firmware in .cfb file.you can download it from internet.
2.I installed ygdp tool latest version.To copy data of firmware.you can copy it just load the .cfb file in ygdp tool.Do not flash with it just load the firmware in ygdp tool now when checking is done. go to your ygdp tool installation directory like "c:/ygdp".where ygdp tool is intalled. go to folder downfiles there u will find a folder named 8297l-100 copy it to another safe location.
3.now open partition.xml file in 8297l-100.there u will find partition name and file name.
4.go to ur adb or fastboot folder.
5.open a cmd window by "shift+right click".
6.now command fastboot devices.if ur phone is detected u can flash the partition manually.like fastboot flash (partition name) (file name).
7.partition name should be named correctly otherwise it will fail.
"Tools " u will need-
1. coolpad dazen 1 drivers for pc
2. adb drivers for coolpad dazen 1.
3. ygdp tool latest
thats all folks hope u will able to unbrick ur dazen 1
devendra singh panwar said:
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
Click to expand...
Click to collapse
jackey31 said:
hello..
i was trying to root and install cwm.. and i unfortunately installed the wrong recovery now my phone does not start.. not even in recovery mode..
it shows a messege "Download and install package...........etc. press volume up to proceed down to cancel" pressing the keys don't do any thing phone gets off after a while.. i have a backup of stock recovery and boot but i think both files are same its 20mb both.. i had used Flashify to backup. and i can't even enter fastboot my pc does not detect my phone perhaps because i don't have the drivers... is it possible to fix my phone or its dead for ever..:crying::crying::crying::crying::crying::crying::silly::silly::crying:
i was following this method here.. www[dot]gizdev[dot]com/easy-way-to-root-coolpad-dazen-1/
Click to expand...
Click to collapse
bro go to this link-https://forum.xda-developers.com/android/help/coolpad-dazen-1-dead-plz-help-t3178510/page2#post71688300
dead
hey my coolpad dazen 1 is completly dead it does not show any mesage when connected to pc via data cable nd pressing vol up nd power button. how can i make this working
what happened to ur hanset before it gone dead pls explain
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
King smus said:
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
Click to expand...
Click to collapse
buddy pls tell us if
1. The phone is rooted.
2. The android version is factory or you installed it.
3. You are flashing the rom in stock recovery or other recovery.
When you bought it what was the android language?
If you are having trouble with flasing i advice you to use pc tools. Because in phone you will need to root the device first. If you well know the conditions of root. :good: