I have downloaded "S6Styled S5Port Rom" and I am facing troubles now.
1 - I can't lock the phone with Pin, it only locked by pattern only?
2 - Whatsapp & Viper is not working. I can't send/receive image files on both, I have tried all the solutions and nothing success.*
I reset the phone to factory settings and wipe the cache and installed the rom again and nothing happens same
Strikebabys said:
I have downloaded "S6Styled S5Port Rom" and I am facing troubles now.
1 - I can't lock the phone with Pin, it only locked by pattern only?
2 - Whatsapp & Viper is not working. I can't send/receive image files on both, I have tried all the solutions and nothing success.*
I reset the phone to factory settings and wipe the cache and installed the rom again and nothing happens same
Click to expand...
Click to collapse
1. You should be on NK1 kitkat firmware
2. You should using cwm 6.0.5.1. Here is the link http://www.mediafire.com/download/dx2mm590clsynzt/CWM-6.0.5.1-mukul.zip
3. Flash V3 s6 styled s5 port. Dont flash V2 or V1
4. Before flash. You should do factory reset, wipe cache and dalvik, format system and boot. And then flash it
5. After that flash deds kernel
in this link : https://www.androidfilehost.com/?fid=23578570567717550
6. And reboot
If this help you
Dont forget to press thanks button
Related
hi i installed a rom ported from xperia s but nothing is working in it...i mean no menu options no settings or nothing....i donk know why..can anyone help me out with this..the installed rom link is down here..i even have the required kernel for that and even flashed that kernel before flashing the rom....
http://forum.xda-developers.com/showthread.php?t=1782771
Vasisht Reddy writes:
1) Flash rom-003 and launcher
2) Now reboot, let the rom settle and reboot to recovery
3) Now flash rom-005
4) now reboot, let the rom settle.
5) Again finally reboot to recovery and flash addon pack
Before you install the CWM you wipe data / factory reset wipe Dalvik cache.
Otherwise, follow the instructions.
Hello,
I updated my CM 10 to CM 11 and forget to flash the new Gapps for CM 11.
Now my phone everytime say's: "Einrichtungsassistent" wurde beendet.
thats german for Setup wizard was closed
I tried to install the new Gapps -> the same error.
After that i tried to flash the ROM again and install the right gapps -> the same error.
After that i tried to wipe cache, wipe dalvik cache and install gapps, wipe cache, wipe dalvik cache -> the same error.
What can i do?
I don't want to wipe everything on my phone.
mfg
wassilij
same issue here. i can confirm that factory reset/wipe does not help
I also have the same issue, i managed to access all applications and desktop by adding "Apps/Startprogram" as a shortcut in at my lockscreen. However when pressing homebutton i still have the issue where Setup Wizard crashes.
Rawa said:
I also have the same issue, i managed to access all applications and desktop by adding "Apps/Startprogram" as a shortcut in at my lockscreen. However when pressing homebutton i still have the issue where Setup Wizard crashes.
Click to expand...
Click to collapse
Same issue with new nightly 09.
It is not possible to change laucnher away from setup wizard until it is completed it seems.
---------- Post added at 11:34 PM ---------- Previous post was at 10:37 PM ----------
Managed to solve it!
First off make sure you have the newest version of ClockworkMod Recovery (6.0.4.4) :
The problem for me was using the wrong gapps i believe! It was ROM Manager who provided me with a bad version. I manually downloaded Gapps 4.4.0:
http://wiki.cyanogenmod.org/w/Gapps
There are also versions of 4.4.1 that should work aswell, I hav'nt tried though:
http://forum.xda-developers.com/showthread.php?t=2012857
Then i simply restarted my phone entering recovery mode (volume up, power, home) and reseted all phone data, reset dalvik etc. Then i first installed gapps from sdcard and then nightly from sdcard.
For those facing Setup Wizard has Stopped FC
I was facing this problem for a long time today. My device is a Galaxy Fit and I was playing with the latest cm11 kitkat update. However it does not work without a complete data wipe and after the data wipe and flashing the latest nightly it gave me the Setup Wizard Stopped FC.
All I did was -
1) Go to recovery mode
2) wipe data/factory reset (this option wipes data , cache and sd-ext)[using CWM 6.0.4.6]{use the Recovery version that allows you to install Kitkat if you faced this problem while flashing cm11 kitkat}
3)wipe cache
4) wipe system {from the mount unmount menu option}
5) wipe dalvik cache {from the advanced menu option}
6) flash the proper gapps file from the sd card
7) flash the proper rom from the sd card
[here I wanted to make sure if everything was working again so i rebooted and well the Setup Wizard DID NOT pop up]
8) rebooted into recovery and flashed the CWM 6.0.2.7 [which you will probably need for Mounts2Sd to work]
This is my first post ever.. Hope I helped. Ty:fingers-crossed:
I just wiped /system and it got fixed
himan20 said:
For those facing Setup Wizard has Stopped FC
I was facing this problem for a long time today. My device is a Galaxy Fit and I was playing with the latest cm11 kitkat update. However it does not work without a complete data wipe and after the data wipe and flashing the latest nightly it gave me the Setup Wizard Stopped FC.
All I did was -
1) Go to recovery mode
2) wipe data/factory reset (this option wipes data , cache and sd-ext)[using CWM 6.0.4.6]{use the Recovery version that allows you to install Kitkat if you faced this problem while flashing cm11 kitkat}
3)wipe cache
4) wipe system {from the mount unmount menu option}
5) wipe dalvik cache {from the advanced menu option}
6) flash the proper gapps file from the sd card
7) flash the proper rom from the sd card
[here I wanted to make sure if everything was working again so i rebooted and well the Setup Wizard DID NOT pop up]
8) rebooted into recovery and flashed the CWM 6.0.2.7 [which you will probably need for Mounts2Sd to work]
This is my first post ever.. Hope I helped. Ty:fingers-crossed:
Click to expand...
Click to collapse
Thank you so much. It worked on my gt-s5570 running CM11
Hi all, currently im using Cyanogenmod 10.2 (20131231) latest official build for android 4.3 JB (CWM 6.0.4.5) and mind to change to omni official build 4.4 KK. After copy and paste the zip files into my SD (ROM 20140101 & Pa_gapps 20131230), i go to recovery mode and wipe everything (wipe data/factory reset, cache , dalvic). after all done then i install the zip files (ROM & Pa_gapps), then i reboot recovery and then reboot system. All installation smoothly with no problem. The problem come after the omni logo loading is done, it should let us to choose a language , register a google account , set up wifi and etc. The screen become blank (black screen), not shows all that particular. The only appear on the screen are battery indicator, line icon and notification bar (can pull it down and can access to all function button there like setting, gps, mobile data, wifi, brightness). When i push home screen button, it become black screen again. I can lock and unlock it but i will become black screen after i unlock it.
so what are actually the problem im facing ? if there any solution i would be thanked
biscuits01 said:
Hi all, currently im using Cyanogenmod 10.2 (20131231) latest official build for android 4.3 JB (CWM 6.0.4.5) and mind to change to omni official build 4.4 KK. After copy and paste the zip files into my SD (ROM 20140101 & Pa_gapps 20131230), i go to recovery mode and wipe everything (wipe data/factory reset, cache , dalvic). after all done then i install the zip files (ROM & Pa_gapps), then i reboot recovery and then reboot system. All installation smoothly with no problem. The problem come after the omni logo loading is done, it should let us to choose a language , register a google account , set up wifi and etc. The screen become blank (black screen), not shows all that particular. The only appear on the screen are battery indicator, line icon and notification bar (can pull it down and can access to all function button there like setting, gps, mobile data, wifi, brightness). When i push home screen button, it become black screen again. I can lock and unlock it but i will become black screen after i unlock it.
so what are actually the problem im facing ? if there any solution i would be thanked
Click to expand...
Click to collapse
Also format system under mounts and storage
And then install zips
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
Also format system under mounts and storage
And then install zips
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
thanks,i will try after finnish downloading 20140102 build
already format the system,wipe data/factory reset,wipe cache,wipe dalvic
but still the same.cant set up google account like we just bought a new phone
biscuits01 said:
already format the system,wipe data/factory reset,wipe cache,wipe dalvic
but still the same.cant set up google account like we just bought a new phone
Click to expand...
Click to collapse
might be gapps problem or even the rom but im assuming its the gapps
use this CORE GAPPS
hope this helps
thuva06 said:
might be gapps problem or even the rom but im assuming its the gapps
use this
hope this helps
Click to expand...
Click to collapse
thanks mate, its works. yeah gapps problem.
can i install additional gapps after on ? like camera for KK, galery for KK
biscuits01 said:
thanks mate, its works. yeah gapps problem.
can i install additional gapps after on ? like camera for KK, galery for KK
Click to expand...
Click to collapse
yes your free to flash anythig
dont thank with words mate
Hi!
I'm a owner of Samsung Galaxy S2, GT-i9100. I always installed a stock unbranded firmware. The last firmwares I installed using MobileOdin from phone. I'm not at advance user for flashing and modding the phone. I never do a wipe or something more advance. My phone is rooted, because MobileOdin allow that.
Now I would like to install the SuperNexus 4.0 - I9100 - Build 1 firmware. I thinks is I looking for a lite firmware with out bloatware and a update Android version.
Reading the post: http://forum.xda-developers.com/showthread.php?t=2583611 I have some doubts.
The instruction are:
Instructions:
First time installing SuperNexus 4.0 to your device, or coming from another ROM:
- Copy Google Apps and SuperNexus ROM into your internal SD Card
- Boot into Recovery (Volume up + Home + Power)
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Flash SuperNexus ROM
- Flash Google Apps package
- Reboot your device
It is possible to install the with MobileOdin this firmware?
If not, I have installed: Room Manager from play.google.com (Premium) for my phone, that is needit?
The flash SuperNexus ROM and Google Apps is at the same time?
Thanks in advance!
elrengo said:
Instructions:
First time installing SuperNexus 4.0 to your device, or coming from another ROM:
- Copy Google Apps and SuperNexus ROM into your internal SD Card
- Boot into Recovery (Volume up + Home + Power)
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Flash SuperNexus ROM
- Flash Google Apps package
- Reboot your device
It is possible to install the with MobileOdin this firmware?
If not, I have installed: Room Manager from play.google.com (Premium) for my phone, that is needit?
The flash SuperNexus ROM and Google Apps is at the same time?
Thanks in advance!
Click to expand...
Click to collapse
The instructions are quite simple and straight forward... Just follow it.. u dont e1 need a pc to flaash the rom into ur phone. Y try odin when u can do it with just the phone???
And Rom manager is not needed for this..
Turn the phone off first. And then boot(turn ur phone on) into recovery mode as mentioned in the instructions by keeping al 3 buttons(vol up + home + power) pressed..
ur phone then boots into recovery.. 'Wipe data and factory reset' option can b seen right ther.. Jus select it..
once done,
(u might hav to flash a kk supporting kernel b4 flashin the supernexus rom.. u can get this here.
Flash tn from ur sdcard by selecting 'install zip' option and selecting the kernel file. Once done, goto advanced->reboot recovery. Once it reboots,)
goto 'instal zip' again and select the supernexus rom zip file there and wait for it to complete flashing..
then goto advanced->wipe dalwik cache.
then flash gapps in a similar way and again wipe dalvik cache and then reboot system from main recovery menu.
Its quite simple!
all the best! :good:
^^^^
Good advice.
Also, OP - remove Rom Manager from your phone right now. Unless you'd like to end up with bootloop, busted recovery & possible data loss (caused by not doing backups & having to do a factory reset in order to fix your phone). Rom Manager does not play nice with the I9100.
Thanks! I installed with out issues the ROM. It's great. My major doubt was how to update de CWM.
Again, thanks!
I need to resolve the camera issue, http://forum.xda-developers.com/showthread.php?t=2583611&page=8, the message #73.
I try to delete o remplace the camera apk and is not possible. I am using ES File Explorer with root privilegies but I can rename, delete or copy to /system/apps directory.
I need to use other application?
thanks!
Supernexus 4 installation gone wrong on i9300
Hi
My i9300 was on CM10.2 and I tried to update it to Supernexus 4.0. I followed all steps but forgot to do a data wipe. Now my phone is unable to reboot. I am able to go to different modes using vol up, down and start and home button.
Please help.........SOS.
fanta182 said:
Hi
My i9300 was on CM10.2 and I tried to update it to Supernexus 4.0. I followed all steps but forgot to do a data wipe. Now my phone is unable to reboot. I am able to go to different modes using vol up, down and start and home button.
Please help.........SOS.
Click to expand...
Click to collapse
Reboot to recovery (Vol Up+ Home+Power) and wipe data.
Sent from my GT-I9100 using Tapatalk
Hi, newbie here. I have trouble with wifi. My phone is Xperia P
I installed aospa rom, at the beginning everything was fine but few hours later I couldnt turn wifi on. I didint know what to do, so I just factory reset the phone. Same thing happened.
Then I installed Blur Line (CM 11) rom, same thing happened again.
On advanced setting it says Mac adress unavailable (idk if this is related with problem)
I searched google and xda for possible solutions.
solution 1 is installing sqlite editor and changing "wifi_display_on" value to 0
this didnt work because it was already 0
solution 2: settings/wi-fi/advanced/wi-fi region code
this didnt work too. I select Turkey (I live in Turkey) but whenever I exit settings and turn back none of the region is selected.
solution 3: copy WCNSS_qcom_wlan_factory_nv.bin file to somewhere
it is on motorola atrix hd thread, so idk if this can work for my phone too. I downloaded it but havent tried yet
Do you think it can work for my phone, or is there any "wifi fix file" for Xperia P
What sould I do now? Should I install another rom (slimkat, pacman, miui v5) or is there any solution for fixing wifi?
Thanks for replies.
Describe the steps you followed to install the ROM.
hliasant said:
Describe the steps you followed to install the ROM.
Click to expand...
Click to collapse
My phone was on stock rom, rooted and cwm installed.
First I unlock bootloader via flashtool, then I flash the boot.img via flashtool
I flash the rom and gapps with cwm (wipe cache, dalvik, factory reset) but then I flash the rom with twrp (wipe data, cache etc) again.
i dont know if I wipe some important data
formerly I installed some stock base roms via cwm, and I didnt wipe anything extra this time
I backuped TA partition before unlock bootloader. Is wifi work if I relock bootloader and flash stock rom & kernel
Fenomenon said:
My phone was on stock rom, rooted and cwm installed.
First I unlock bootloader via flashtool, then I flash the boot.img via flashtool
I flash the rom and gapps with cwm (wipe cache, dalvik, factory reset) but then I flash the rom with twrp (wipe data, cache etc) again.
i dont know if I wipe some important data
formerly I installed some stock base roms via cwm, and I didnt wipe anything extra this time
I backuped TA partition before unlock bootloader. Is wifi work if I relock bootloader and flash stock rom & kernel
Click to expand...
Click to collapse
Seems like some kernel modules are missing.
This is a sure method-procedure that I follow for flashing a new ROM on my and on my friends' XP.
1)flash stock JB firmware(ftf) using flashtool.
2)flash boot.img from the ROM you want to flash, using flashtool.
3)reboot in twrp using power button during boot up.
4)wipe data, cache, dalvik.
5)flash ROM + gapps and reboot.
hliasant said:
Seems like some kernel modules are missing.
This is a sure method-procedure that I follow for flashing a new ROM on my and on my friends' XP.
1)flash stock JB firmware(ftf) using flashtool.
2)flash boot.img from the ROM you want to flash, using flashtool.
3)reboot in twrp using power button during boot up.
4)wipe data, cache, dalvik.
5)flash ROM + gapps and reboot.
Click to expand...
Click to collapse
thanks for help :good:
I install slimkat 8.8 and wifi works fine atm :laugh: