Hello,
I have motorola photon 4g MB855 released by sprint . When i bought phone it was working fine with android 2.3.5. i tried updating it to newer version by using a post at xda forum but the upgrade trick didnot worked and phone become dead.
Then i found another post to get the phone back to normal but the sbf file i got was of Motorola electrify. I installed that SBF and phone works fine with local GSM networks but it battery drains very fast and phone get heat up if 3g or wifi is used.
I tried installing Sprint SBF that i found from interent but after installing that SBF, Local GSM no longer works on the phone.
If any one have stock Sprint firm ware unlocked, please share with me
Thank you
Sajid
Related
Hello,
Could you please answer the question in subject.
I have read thread: "[SCRIPT] Root v2 for 4.1.57 (Stock 1.2.6 REQUIRED)". It says it requires 1.2.6.
I went to "[GUIDE] Flash SBF to Motorola Atrix 4G " about how to falsh stock 1.2.6. Therefore it's known that flashing back unlocked atrix can cause problem with WiFi.
As all I need from rooting is to use my device as WiFi hotspot for tethering I need WiFi to work with no problems.
Additional information: I live in Ukraine and I am using local carrier services, so I will have to provide real carier's APN to make newtork working.
thanks in advance,
Alex
My friend, i also have an unlocked atrix and i installed the 1.2.6 sfb file without having problems on wifi, then i applyed the root and updated to 4.1.57!
I installed barnacle and use it to wifi tether!!
All works perfectly!!!
Sent from my MB860 using XDA App
I ordered via AmazonWireless's "Replacement Phone" option to get one to Australia and received is about 1.5 months ago and its been okay so far.
I'm on Telstra (Australia) which primarily uses 850MHz (UMTS/WCDMA/HSPA/HSPA+).
As there has been leaked Telstra ROM, I'm wondering if there is actually anything different between the devices other than the ROM, and if so, if I can flash the SBF from the Telstra/Bell devices onto my Atrix without causing issues.
TheScream said:
I ordered via AmazonWireless's "Replacement Phone" option to get one to Australia and received is about 1.5 months ago and its been okay so far.
I'm on Telstra (Australia) which primarily uses 850MHz (UMTS/WCDMA/HSPA/HSPA+).
As there has been leaked Telstra ROM, I'm wondering if there is actually anything different between the devices other than the ROM, and if so, if I can flash the SBF from the Telstra/Bell devices onto my Atrix without causing issues.
Click to expand...
Click to collapse
After reading some of these threads it seems that the Telstra SBF is incompatible with the AT&T atrix. After my own experience with flashing this to the Bell Atrix, I've come to the conclusion that there seems to be an American version of the Atrix as well as an international version. This is because the Atrix can either be recognized as NS Olympus or SE Olympus through RSD Lite. Since my Atrix, as well as other who have successfully flashed theirs with the Telstra SBF have the SE version, it seems that this may be the only one compatible with the Australian firmware.
If you ordered your phone through Amazon, it is likely that you have the NS version. You can verify by downloading RSD Lite, plugging in your phone while in RSD mode and seeing what shows up on your computer.
Hi, I just bought a Motorola Atrix 4g , and presume that it will be shipping with the newest stock update. I have been searching everywhere on how to do this, but can't find anything, fit specifically to my needs. I need directions on how to put my unmodded brand new Motorola Atrix 4G with stock update 4.5.91 to the latest update of Gingerblur. Thanks, I'm new to the forums, but I understand technical stuff.
Hello, I recently acquired a motorla atrix 3g (Dominican Republic), the phone is currently at android version 2.2.2 and I would like to upgrade to Gingerbread but when I try to find updates from the phone it points that the phone is up to date, this is since the carrier (Claro Dominicana) has not yet released GB for this phone. I would like to know the best method to do upgrade to GB preferably without rooting the device.
Oscar.
Unlock the bootloader, get a recovery, flash a rom
So after I became impatient waiting for Motorola to release their official ics update for the me860 I decided to try and unlock my bootloader and flash on jokersax's excellent cm9 rom (I must say its sexxay) but now when I go to settings -> about phone it says my phone model is mb860 instead of me860. Now I understand that mb860 is branded as the atrix 4g and mainly distributed in America whereas the me860 is not branded as the atrix 4g and is mainly distributed in Asia and Europe but their hardware are still the same. My question is can I treat my phone as mb860 and flash mb860 roms on it or is it still an me860 that thinks it is an mb860???
Sent from my atrix me860/mb860(??)
When I bricked my Atrix (MB860), I ended up flashing a HKTW SBF which changed the branding on my Atrix to ME860. There isn't any difference, works like it did before.
Posted from my rooted Motorola Atrix.