Hello all,
I am having a problem trying to upgrade my bootloader from NC5 to OC5 and my modem from NH7 to OC5. I have tried to use odin to upgrade straight to OC5 and still says baseband is NH7. I have tried to use odin to up grade to NK4 then go to OC5 and still says NH7. Each time i have formatted data, do a full and complete wipe through TRWP recovery x3. I have no clue to how to be able to upgrade to OC5, any ideas or tips would be great thanks guys!
Can you Odin back to stock NH7 and take the OTA? Or would you have to go back to NC5 even, because of your bootloader?
joeboo28 said:
Hello all,
I am having a problem trying to upgrade my bootloader from NC5 to OC5 and my modem from NH7 to OC5. I have tried to use odin to upgrade straight to OC5 and still says baseband is NH7. I have tried to use odin to up grade to NK4 then go to OC5 and still says NH7. Each time i have formatted data, do a full and complete wipe through TRWP recovery x3. I have no clue to how to be able to upgrade to OC5, any ideas or tips would be great thanks guys!
Click to expand...
Click to collapse
Do a battery pull let it sit for a few sec. Then put your battery back in and do the 3 button download mode combo (Power, Home, Volume down) from a completely powered off state. Once in D.L. mode and plugged in to Odin hit the (phone tab) not the (pda tab) and load your bootloader/modem tar file in (phone) then hit start and BAM! Happy face! Best if luck my friend.
Goat1378 said:
Do a battery pull let it sit for a few sec. Then put your battery back in and do the 3 button download mode combo (Power, Home, Volume down) from a completely powered off state. Once in D.L. mode and plugged in to Odin hit the (phone tab) not the (pda tab) and load your bootloader/modem tar file in (phone) then hit start and BAM! Happy face! Best if luck my friend.
Click to expand...
Click to collapse
Where can you find just the bootloader/modem tar? I have been looking all day. (N900P)
Moritzio said:
Where can you find just the bootloader/modem tar? I have been looking all day. (N900P)
Click to expand...
Click to collapse
I usually tuck them away just in case I think it's the Tar I'm downloading new to see what it was. But check it out it you like.
https://www.androidfilehost.com/?fid=23991606952614907
And this is the most recent I have which is the OH1 update: https://www.androidfilehost.com/?fid=24052804347796070
Moritzio said:
Where can you find just the bootloader/modem tar? I have been looking all day. (N900P)
Click to expand...
Click to collapse
Found these:
OC5
http://forum.xda-developers.com/note-3-sprint/development/baseband-modem-oc5-odin-flashable-t3097789
OK2
(removed - wrong device model - still looking)
[edit]Found this:
http://forum.xda-developers.com/not...ck-rom-odin-flashable-stock-firmware-t3306053
and used this guide:
http://forum.xda-developers.com/galaxy-s3/general/guide-extract-bootloader-make-flashable-t2864264
to make my own tar.md5 files.
Please note that, for Samsung devices, you need the NON-HLOS.bin also.
https://ohthehugemanatee.org/blog/2...m-slash-baseband-firmware-on-a-samsung-phone/
[/edit]
Anyone have the ph1 bootloader and modem tar file?
Sent from my SM-N910P using XDA-Developers mobile app
+1 on looking for the PH1 boot/modem.
Related
SOLVED Flashing stock with odin http://forum.xda-developers.com/show....php?t=2289325
After a couple hours of searching I haven't had any luck fixing what i've mistakenly done to my phone.
I made a new account and am first posting because I am at witts end.
The status of my phone is-
it will not boot.
It hangs at the Samsung Custom screen.
I can only get into download mode.
When I try to boot into recovery the blue text top left says it's booting but it doesn't boot into recovery.
I suspect I corrupted my recovery somehow.
I've tried flashing different kernels with odin and the few that ive tried successfully flash but same thing still happens.
I think I need a CWM recovery or TWRP recovery that I can flash with odin? Is that a thing?
Any point in the right direction would greatly be appreciated.
http://forum.xda-developers.com/showthread.php?p=41747406
You can try that I don't know if it'll work in download/odin.
I suggest just flashing the stock update via odin and re root..
Sent from my SCH-I545 using Tapatalk 2
notstevek said:
http://forum.xda-developers.com/showthread.php?p=41747406
You can try that I don't know if it'll work in download/odin.
I suggest just flashing the stock update via odin and re root..
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
Those files do not work with ODIN.
I dont have a stock update file to flash with odin nor have I been able to find any for download.
The mdk stock firmware file is located in the dev section, flashable via odin.
SCH-I545 using Tapatalk 2
http://forum.xda-developers.com/showthread.php?t=2289325
This is the MDK image that will take you back to bone stock, out-of-the-box. Just open ODIN, put the phone in download mode, put this file in PDA only section, and you're golden.
Hethor said:
http://forum.xda-developers.com/showthread.php?t=2289325
This is the MDK image that will take you back to bone stock, out-of-the-box. Just open ODIN, put the phone in download mode, put this file in PDA only section, and you're golden.
Click to expand...
Click to collapse
I'm pretty sure this is exactly what I need.
Downloading and flashing now.
You all were very helpful!
Phew!!! Solved.
Hethor said:
http://forum.xda-developers.com/showthread.php?t=2289325
This is the MDK image that will take you back to bone stock, out-of-the-box. Just open ODIN, put the phone in download mode, put this file in PDA only section, and you're golden.
Click to expand...
Click to collapse
It's nice to have my phone back , I was getting really worried there for a bit..
I had TWRP and CleanRom Running just fine but after a few mods and a reboot it hung on me.
I wonder if anyone is aware of these issues or if I'm just 'special' Hmmm
I really wanted to have a LIGHT TouchWiz rom that I can add mods to myself.
Any suggestions?
I was able to downgrade from the NG6 update released a few days ago back to NC5.
Knox Warranty Void: 0x0
I used the info and tut from this post
I used the full wipe method, I'm unsure if the no wipe one works
Information:
1. ROOT METHOD can be found here
2. Otherwise, Download Odin 3.09 here (Note: Bootloader = BL , PDA = AP , Phone = CP)
Download: VRUFNC5 No-Wipe SCH-I545_VZW_1_20140330160240_yni63xq6zh.zip
MD5: 71d1c7ea58d2ba81ccadd965b54a2215
Download: VRUFNC5 Full-Wipe SCH-I545_VZW_1_20140330160240_8il17ls9o2_fac.zip
MD5: 8a22dd4a47c2c5f890227fd952657d38
Directions:
No-Wipe
1. Unzip the file and you should have a tar.md5
2. Select the tar.md5 in Odin under PDA (or AP if using Odin 3.09) and keep Odin's default settings
3. Click start and wait for it to say Pass!
Full Wipe ( AKA Emeregency Repair)
1. Unzip the file and you should have a ALL_VZW_I545VRUFNC5_I545VZWFNC5_1151670_REV06_user _low_ship_MULTI_CERT.tar.md5
2. Select the tar.md5 in Odin under PDA (or AP if using Odin 3.09) and keep Odin's default settings
3. Extract the PIT file from your phone or Odin tar, also I've uploaded it here just in case.
4. Put the PIT file in PIT and load the the Odin tar.md5 in PDA (or AP if using Odin 3.09) then click start.
Click to expand...
Click to collapse
Just confirming that this downgrade from ng6 worked for me too. im back to nc5 and yet to see if there will be no more reboots that everyone is having issues with on ng6.
Is there a way to do this with out using odin on a computer?
Im trying this right now via odin..... wish me luck.
brewer15650 said:
Im trying this right now via odin..... wish me luck.
Click to expand...
Click to collapse
Good Luck!!
Let everyone know how it went. I don't intend to take this update, but others will and will, undoubtedly, need to take the path you are now on...
snickerzz said:
I was able to downgrade from the NG6 update released a few days ago back to NC5.
Knox Warranty Void: 0x0
I used the info and tut from this post
I used the full wipe method, I'm unsure if the no wipe one works
Click to expand...
Click to collapse
No-Wipe works fine.
jwhistler said:
Good Luck!!
Let everyone know how it went. I don't intend to take this update, but others will and will, undoubtedly, need to take the path you are now on...
Click to expand...
Click to collapse
Worked like a charm. I did the full wipe and repartion(PIT). Took me a 1st timer using odin maybe 30mins to do.
npjohnson said:
No-Wipe works fine.
Click to expand...
Click to collapse
I am having a hellish time with no-wipe. Constant errors prevent input of even the lockscreen PIN. I've tried different cables, ports, running Odin as administrator and not... Ideas?
posaune76 said:
I am having a hellish time with no-wipe. Constant errors prevent input of even the lockscreen PIN. I've tried different cables, ports, running Odin as administrator and not... Ideas?
Click to expand...
Click to collapse
turn on usb debugging in the settings and turn off the lock code
snickerzz said:
turn on usb debugging in the settings and turn off the lock code
Click to expand...
Click to collapse
Damn. That probably was the thing that was killing me. After the first attempt, though, I could barely fight through the errors to a home screen, let alone change settings (delete corporate account to get rid of PIN, turn on dev mode, etc.). Ended up doing full wipe. Thanks for the thought. Lesson learned in case there's a next time.
Using Odin 3.09 for the no-wipe method, I load the NC5 .md5 file, and select it as instructed, but once I hit start, I get message stating "All threads completed. (succeed 0 / failed 0) " instantaneously without anything actually happening. I have both developer mode and USB Debugging enabled.
Am I missing something?
Ignore all of that. I loaded the .md5 file up before the phone was connected in Download Mode. Re-loading it fixed everything.
I flashed NC5 over NG6. constant ERROR!! process.acore HELP
It flashed successfully via ODIN. MD5 checker matched. So no corrupt rom. After booting, i keep getting non-stop android.process.acore & android.process.media stopped working every 1 sec, and hitting ok keeps bringing it back and I cannot do anything !!! This is so frustrating. I specifically wanted no wipe. Please tell me i dont have to Full Wipe it. How did it work for you, tell me the step by step. My NG6 was rooted, should I have unrooted first. Tell me what to do!!!
I tried to do this method,but I have had no luck. My phone returned the error "fused 6 binary 5" - What is it that I'm missing?
i keep getting errors
Going to try it.
fyi, after error upon error I tried a different cable using a different USB port. Worked like a charm!
I did the no-wipe method and got the android.process.acore & android.process.media errors. I ended up doing a full wipe and it worked fine. Unfortunately my Titanium Backup I ran the night before didn't run quite right ><. Live, learn and check backups!
NG6
Was NG6 released with a new update from VZ, or was this ported from the S5?
jwhistler said:
Good Luck!!
Let everyone know how it went. I don't intend to take this update, but others will and will, undoubtedly, need to take the path you are now on...
Click to expand...
Click to collapse
Is there a way unrooted to stop the update??
I had to take the wipe method but no biggie.
rfd177 said:
Is there a way unrooted to stop the update??
I had to take the wipe method but no biggie.
Click to expand...
Click to collapse
Are the problems with NG6 isolated to rooted phone, custom roms, or both at the same time?
I went to upgrade to the new hyperdrive since they sent me the ota. Phone has been acting weird so I was going to do a complete wipe. I took my sd card out which my son took and lost on me and OI can find anywhere. I had another card so d/l new hyperdrive onto other card. I went to wipe cache and install new rom. phone wiped data and now wouldnt install new rom. I dont remember all the build I was on on the phone but I had Hyperdrive 16 before I started this if that helps at all. I am stuck on samsung custom boot screen. I can get into odin recovery and tried recovery but keeps failing. can I get some help I need my phone i have to go to work soon. Thanks
ive tried the rootjunky video with both no wipe and full wipe neither worked. odin failed.
FlipFlop425 said:
ive tried the rootjunky video with both no wipe and full wipe neither worked. odin failed.
Click to expand...
Click to collapse
What files are you trying to flash? Did you use Safestrap to install RLS16?
Sent from my NCC-1701 using Tapatalk.
i had downloaded the new update for hyper drive. Right now my biggest probelm is I cannot get past the splash screen. I can get into download mode though so can we try to figure out how to unbrick me first. Download mode is the only thing I can seem to get into right now
FlipFlop425 said:
i had downloaded the new update for hyper drive. Right now my biggest probelm is I cannot get past the splash screen. I can get into download mode though so can we try to figure out how to unbrick me first. Download mode is the only thing I can seem to get into right now
Click to expand...
Click to collapse
That's why I need to know if you used Safestrap as your recovery. It's very likely you're trying to flash the wrong file with Odin.
If you had Safestrap your build wasn't MDK. If you didn't need Safestrap then your build was MDK.
So I'll ask again, what file are you trying to flash, with Odin, that keeps failing?
riker147 said:
That's why I need to know if you used Safestrap as your recovery. It's very likely you're trying to flash the wrong file with Odin.
If you had Safestrap your build wasn't MDK. If you didn't need Safestrap then your build was MDK.
So I'll ask again, what file are you trying to flash, with Odin, that keeps failing?
Click to expand...
Click to collapse
I used to have to use safestrap. I was trying to flash the mdk file from rootjunky's video on unbricking your phone
FlipFlop425 said:
I used to have to use safestrap. I was trying to flash the mdk file from rootjunky's video on unbricking your phone
Click to expand...
Click to collapse
NO!!! You cannot flash the MDK file, you cannot downgrade the S4! Always ends badly, go to the general section and grab the NC5 full-wipe tar and flash with ODIN.
npjohnson said:
NO!!! You cannot flash the MDK file, you cannot downgrade the S4! Always ends badly, go to the general section and grab the NC5 full-wipe tar and flash with ODIN.
Click to expand...
Click to collapse
I have tried that from SUrge1223. That did not work for me. I cannot get in to my phone to re root it. Is that the right file the one from him?
FlipFlop425 said:
I have tried that from SUrge1223. That did not work for me. I cannot get in to my phone to re root it. Is that the right file the one from him?
Click to expand...
Click to collapse
From here http://forum.xda-developers.com/showthread.php?t=2735172. I would choose the "Full Wipe" version. Make sure you have a good download. Check MD5. Make sure you follow the directions for Odin. If you verify all of that, and it still doesn't work, I'm afraid I won't be any more help. Someone with more knowledge than I have will have to step in. Good luck.
riker147 said:
From here http://forum.xda-developers.com/showthread.php?t=2735172. I would choose the "Full Wipe" version. Make sure you have a good download. Check MD5. Make sure you follow the directions for Odin. If you verify all of that, and it still doesn't work, I'm afraid I won't be any more help. Someone with more knowledge than I have will have to step in. Good luck.
Click to expand...
Click to collapse
I can vouch for the full Version. Saved my bacon.
You have to boot the phone into a special mode that will allow ODIN to funtion
Turn off the SGS4 and boot it into Download/Odin Mode: press and hold the Volume Down, Home and Power buttons simultaneously for a couple of seconds till you see a warning screen. Then press Volume Upkey to enter Download Mode.
I got it!!! Found my Samsung cable and all went well. TY for ALL the help!
FlipFlop425 said:
I got it!!! Found my Samsung cable and all went well. TY for ALL the help!
Click to expand...
Click to collapse
Yeah, it is a really good feeling when that ODIN starts to run like it means it. Nothing beats that first boot up!
I'm sure this has been asked before but I have no idea how to find the right thread, I've been searching but I'm not sure which method to use. I used towel root to root my S4 with NC5 build running 4.4.2 a while back and lately my phone has been randomly powering off. It shuts down instantly as if holding down the power button for 10 seconds. I'm not sure if this matters but I have xposed installed and before I found out about the locked bootloader I tried to install TWRP and CWP, so when I boot up it says custom. I want to factory reset the phone to hopefully solve this powering off problem, and I wanna be able to root again so I can put xposed back on. I have a laptop to use odin on if I need to. If someone could help me out it would be very much appreciated.
Start here.
http://forum.xda-developers.com/showthread.php?t=2735172
-
meazz1 said:
Start here.
http://forum.xda-developers.com/showthread.php?t=2735172
-
Click to expand...
Click to collapse
Thank you that helps so much. So I should do the full wipe correct? And how do I extract the PIT file? Should I just download the one from the thread?
Autokill45 said:
Thank you that helps so much. So I should do the full wipe correct? And how do I extract the PIT file? Should I just download the one from the thread?
Click to expand...
Click to collapse
You want stock yes? Should just download Odin and the NC5 image. Place the NC5 in PDA if I remember correctly, been a while but should be. Once it is flashed you can then re root and do what not And yes I would do full wipe.
Illogi.xbone said:
You want stock yes? Should just download Odin and the NC5 image. Place the NC5 in PDA if I remember correctly, been a while but should be. Once it is flashed you can then re root and do what not
Click to expand...
Click to collapse
Yes I want stock NC5 so I can use towel root again. Sorry if these are stupid questions, this is my only experience with anything like this and I'm having trouble understanding.
So I should download Odin amd the full wipe NC5 image, unzip the image and place it in AP correct? But in the video he talks about drivers, do I need these and if so where do I get them? And in the thread under the directions for the full wipe step 3 says to extract the PIT file from your phone, do I need to do that?
Autokill45 said:
Yes I want stock NC5 so I can use towel root again. Sorry if these are stupid questions, this is my only experience with anything like this and I'm having trouble understanding.
So I should download Odin amd the full wipe NC5 image, unzip the image and place it in AP correct? But in the video he talks about drivers, do I need these and if so where do I get them? And in the thread under the directions for the full wipe step 3 says to extract the PIT file from your phone, do I need to do that?
Click to expand...
Click to collapse
We all start from somewhere :highfive: Yes, follow the instructions to the letter. Follow step 3 and you are golden. First Check to see if you already have drivers installed. Open Odin with your phone in download mode and plug it in. If Odin finds it then you already have the drivers if not windows may install them for you, if you are on 7 and up I know for sure. :laugh: Had to use Odin a lot before with my old S4.
Well I finally figured it out. Nearly had a heart attack when I pushed the run button lol. Thank you guys so much for the help!
Autokill45 said:
Well I finally figured it out. Nearly had a heart attack when I pushed the run button lol. Thank you guys so much for the help!
Click to expand...
Click to collapse
No problemo man :highfive:
I did the full wipe via Odin to restore to NC5 and the only hiccup I'm having is that WiFi will not connect. I've done multiple reboots, too, just FYI.
Any suggestions, please?
Do you have Safestrap installed? Sounds like you need the right modem.
Sent from my SCH-I545 using XDA Free mobile app
I have been away from the boards for a while but I am back because I have a problem I need help with.
My rooted Note 3 tried to update itself and I lost root, but it is also not unrooted. The update failed and only managed to annoy my phone.
BUT....
I got a text message today saying, "Action Needed. Perform a software update to prevent service interruption.
My work phone has company paid for Hot spot so I don't really need to have my personal phone rooted any longer.
Is there a way to reset my phone so Sprint thinks it was never rooted and the update goes through OR should I update with the latest mods and a new ROM?
Currently running:
4.4.2
N900PVPUNCNC5
w/kernel: 3.4.0 - 951486
any help would be... well.. .um... helpful
Thanks
I got the same text today. When i try to download the software update, it says that my phone has been modified and to try going to samsung kies on a pc to download the update.
Sent from my SM-N900P using XDA Free mobile app
Got the same text this morning, but I still need root. Does anyone know what the update is actually for, so we can work around it?
You could try to restore it to stock and try the ota update again. I know in recent years Samsung has implemented the KNOX warranty bit (switch) that gets tripped by certain root methods, flashing kernels, recoveries and is basically un-revertible.
Try out this guide below and let me know how it goes. I don't own a note 3 but thought I might try and help.
http://www.galaxynote3update.com/un...turn-to-official-4-4-2-n900pvpubnc5-firmware/
Sent from my LGMS395 using XDA Free mobile app
Jayzion said:
I have been away from the boards for a while but I am back because I have a problem I need help with.
My rooted Note 3 tried to update itself and I lost root, but it is also not unrooted. The update failed and only managed to annoy my phone.
BUT....
I got a text message today saying, "Action Needed. Perform a software update to prevent service interruption.
My work phone has company paid for Hot spot so I don't really need to have my personal phone rooted any longer.
Is there a way to reset my phone so Sprint thinks it was never rooted and the update goes through OR should I update with the latest mods and a new ROM?
Currently running:
4.4.2
N900PVPUNCNC5
w/kernel: 3.4.0 - 951486
any help would be... well.. .um... helpful
Thanks
Click to expand...
Click to collapse
bowhunt2005 said:
I got the same text today. When i try to download the software update, it says that my phone has been modified and to try going to samsung kies on a pc to download the update.
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
Ltrain23 said:
Got the same text this morning, but I still need root. Does anyone know what the update is actually for, so we can work around it?
Click to expand...
Click to collapse
You guys can download the OC5 (Lollipop) tar from this thread and flash it using ODIN. **Fair warning: this will get rid of your root access and also any custom recovery you installed** If you want to regain root, you can follow the same procedure but with CF-Autoroot instead of the OC5 .tar file.
1) Download the OC5 .tar.zip file and ODIN
2) Unzip
3) Go to the ODIN folder and right click, select "run as administrator"
4) Click on the PDA button and select the OC5 .tar file you just extracted
5) Completely power down your phone (I pull the battery for a few seconds)
6) Enter Download mode by pressing and holding Volume Down + Menu + Power button, then Volume Up to continue
7) Plug in your phone and click start
8) Your phone will reboot and be upgraded to OC5 Lollipop
I am at work, I will try this this weekend.
Thank You!
I also received this message this AM, and am very curious...
Is Sprint basically forcing all Note 3 users to update to Lollipop?
Anybody have any additional info, by any chance? Even a suggestion of why this is or could be necessary...
I'm happy with my KitKat, especially since Xposed will cease working if I update...
Thanks!
weavr said:
You guys can download the OC5 (Lollipop) tar from this thread and flash it using ODIN. **Fair warning: this will get rid of your root access and also any custom recovery you installed** If you want to regain root, you can follow the same procedure but with CF-Autoroot instead of the OC5 .tar file.
1) Download the OC5 .tar.zip file and ODIN
2) Unzip
3) Go to the ODIN folder and right click, select "run as administrator"
4) Click on the PDA button and select the OC5 .tar file you just extracted
5) Completely power down your phone (I pull the battery for a few seconds)
6) Enter Download mode by pressing and holding Volume Down + Menu + Power button, then Volume Up to continue
7) Plug in your phone and click start
8) Your phone will reboot and be upgraded to OC5 Lollipop
Click to expand...
Click to collapse
Thanks for info. I figured i may have to lose root. However, im already on oc5 and still recieved the text. I originally flashed the nab and let the ota update happen. So i was stock unrooted oc5. Then i rooted by installing twrp with odin and then flashed that updatesu.zip in twrp. So why would i be getting an update notification? Is there a way that sprint knows my phone is rooted? Why would i lose service?
Sent from my SM-N900P using XDA Free mobile app
bowhunt2005 said:
Thanks for info. I figured i may have to lose root. However, im already on oc5 and still recieved the text. I originally flashed the nab and let the ota update happen. So i was stock unrooted oc5. Then i rooted by installing twrp with odin and then flashed that updatesu.zip in twrp. So why would i be getting an update notification? Is there a way that sprint knows my phone is rooted? Why would i lose service?
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
No, they wouldn't be sending that knowing your phone is rooted. Mine has been rooted with Knox tripped since the second day I owned it and I haven't gotten that message. Maybe it is their way of trying to get people on to the latest modem. They are are probably saying that they think you will have better service on the OC5 modem? As long as you made it to OC5, I wouldn't worry.
They just want you on 0C5. They dont care if you're on kitkat or lollipop
Got this message today as well.
I was also a recipient of this unwelcomed text. I've been on a MJ4 ROM for a long time and had no intention of upgrading, especially until Xposed framework works with Lollipop.
For those who took the update, anything good from it?
It's not all bad, definitely different then other android version but overall I think it runs rather smooth
Just odin oc5 modem not the bootloader. I wanna stay on kitkat a bit longer.
jeeperz said:
Just odin oc5 modem not the bootloader. I wanna stay on kitkat a bit longer.
Click to expand...
Click to collapse
Any advice on how to do this? I'm not ready to lose all my Xposed modules yet.
Ltrain23 said:
Any advice on how to do this? I'm not ready to lose all my Xposed modules yet.
Click to expand...
Click to collapse
Here is the thread with the baseband/modem that you can ODIN to keep KitKat. There are instructions in the first post but don't be afraid to ask if you have any questions.
Would this work for MJ4 or would I need to upgrade to KitKat?
weavr said:
Here is the thread with the baseband/modem that you can ODIN to keep KitKat. There are instructions in the first post but don't be afraid to ask if you have any questions.
Click to expand...
Click to collapse
Just to clarify, ONLY push the modem through Odin in those instructions. I wasn't the only one stupid enough to try and push an OC5 bootloader on 4.4.4
Got it figured out with some help, but what a waste of time.