Hey
I deleted my operation system on my s6 edge.... And i trying to use Samsung Swtich to fix it but i cant find my serial number. any help pleas???
It's hard to say what number you need. Your best bet is also the easiest: have a look at the stickers on the box it came in.
You can get the S/N by holding the power, home, and volume down buttons until the warning screen appears. Then press the home button to see the bar code screen. Hope this helps.
My serial number was on a sticker on the back of the phone when it was bought.
THANK YOU Russjhjr YOU ARE THE BEST YOU ADVICE CAN HELP ME A LOT BRO
CAR777 said:
THANK YOU Russjhjr YOU ARE THE BEST YOU ADVICE CAN HELP ME A LOT BRO
Click to expand...
Click to collapse
Can you explain how that helped you? I'm stuck in download mode after a failed ODIN update and trying to use smart switch to initialize my phone. I enter the IMEI that I get from the screen in Russjhjr's post, but it tells me that the serial I've entered is invalid.
32BitWhore said:
Can you explain how that helped you? I'm stuck in download mode after a failed ODIN update and trying to use smart switch to initialize my phone. I enter the IMEI that I get from the screen in Russjhjr's post, but it tells me that the serial I've entered is invalid.
Click to expand...
Click to collapse
Did you make sure that what you typed was case-sensitive? And it's the S/N number. Not the IMEI. The picture below the imei picture, if you will.
Russjhjr said:
You can get the S/N by holding the power, home, and volume down buttons until the warning screen appears. Then press the home button to see the bar code screen. Hope this helps.
Click to expand...
Click to collapse
THANK YOU SO MUCH. You have saved me from having to buy another phone. I owe you.
S/N NUMBER
I deleted my operation system on my s6 edge.... And i trying to use Samsung Swtich to fix it but i cant find my serial number. any help pleas??? I DONT NO REGION. I CHANGED THE BACK COVER NO S/N NUMER ON IT TELL ME PLZZZ
SORRY FOR BAD ENGLISH
The serial number is on the back of the handset. Underneath the CE logo (and the other symbols/numbers) you'll see, in TINY and hard to see writing, that the S/E is there. UNLESS you've changed the rear glass.
dont know if u noticed..but u can just reflash the firmware via odin if u get error during download,no ned for that smart switch
HELP!
brag288 said:
dont know if u noticed..but u can just reflash the firmware via odin if u get error during download,no ned for that smart switch
Click to expand...
Click to collapse
The problem for me is I rooted and after my first reboot I got the FRP lock screen in a boot loop. I can enter download but flashing from Odin fails due to the frp lock. I can reset from bootloader but still no joy. The only post I have found that looks promising is the one that says to use Smart Switch Emergency Recovery but none of the numbers work for the SN. I have tried every one on the box, and the one on the back of the phone. No luck. I can't boot the phone so I can't see from the software either. The one that shows up on the barcode (vol down + home+ pwr then home) is the same as the one on the back of the phone. Any help greatly appreciated.
Russjhjr said:
You can get the S/N by holding the power, home, and volume down buttons until the warning screen appears. Then press the home button to see the bar code screen. Hope this helps.
Click to expand...
Click to collapse
hi. it doesn`t work for me . if I do like what you say, it will put into odin mode
help me please
geotravelcat said:
The problem for me is I rooted and after my first reboot I got the FRP lock screen in a boot loop. I can enter download but flashing from Odin fails due to the frp lock. I can reset from bootloader but still no joy. The only post I have found that looks promising is the one that says to use Smart Switch Emergency Recovery but none of the numbers work for the SN. I have tried every one on the box, and the one on the back of the phone. No luck. I can't boot the phone so I can't see from the software either. The one that shows up on the barcode (vol down + home+ pwr then home) is the same as the one on the back of the phone. Any help greatly appreciated.
Click to expand...
Click to collapse
Hey did you ever find a fix to this by chance? I'm currently having the same issues that your describing and not able to find a fix..
jbudness said:
Hey did you ever find a fix to this by chance? I'm currently having the same issues that your describing and not able to find a fix..
Click to expand...
Click to collapse
I flashed a later stock version onto the phone to recover. Next I ran the rooted version I wanted, then ran the frx fix. I reset and ran it again. Be sure not to install the OTA update for security or it will give the error again. Also, reboot a few times before you start reinstalling apps to make sure it doesn't error out. I am pretty sure the OTA update is the culprit. Good luck
Russjhjr said:
You can get the S/N by holding the power, home, and volume down buttons until the warning screen appears. Then press the home button to see the bar code screen. Hope this helps.
Click to expand...
Click to collapse
^^ This doesn't work on Note 5
Marshmallow update glitches on install now it is calling for smart witch emergency recovery but it requires a S/N which is NOT IEMI and it's NOT written on the phone. Odin wont load Sammobile firmwares. What to do? :crying:
having the same problem with Samsung S6 (SM-G920P) Smart switch does not recognize serial number (barcode) found either in download mode or on back cover
The needed serial number for these type of Sammy phones is not on the phone somewhere like the Smart Switch software says! It's actually inside the box on a sticker with a barcode on it only with IEM numbers and model number.
After my above post I found this and the serial no. worked inside Smart Switch to do and initialise , dl latest stock rom and install.
Unfortunately as of mid 2016 even having the serial number is now being rejected ... yes I am in trouble again with indian curry muncher custom rom and can't load back a stock rom via smart switch or odin!
abuts said:
having the same problem with Samsung S6 (SM-G920P) Smart switch does not recognize serial number (barcode) found either in download mode or on back cover
Click to expand...
Click to collapse
Hey man did you find a solution... I am in the same boat now... correct serial number (previously used in Smart Switch successfully) now being rejected by Samesungs servers!
1
AlienSexGod said:
The needed serial number for these type of Sammy phones is not on the phone somewhere like the Smart Switch software says! It's actually inside the box on a sticker with a barcode on it only with IEM numbers and model number.
After my above post I found this and the serial no. worked inside Smart Switch to do and initialise , dl latest stock rom and install.
Unfortunately as of mid 2016 even having the serial number is now being rejected ... yes I am in trouble again with indian curry muncher custom rom and can't load back a stock rom via smart switch or odin!
Hey man did you find a solution... I am in the same boat now... correct serial number (previously used in Smart Switch successfully) now being rejected by Samesungs servers!
Click to expand...
Click to collapse
Yours is an S6?. Then should be SM-G9208. N9208 is Note 5. N is reserved for Note Series.
Sent from my SM-G925F
Rosli59564 said:
1
Yours is an S6?. Then should be SM-G9208. N9208 is Note 5. N is reserved for Note Series.
Sent from my SM-G925F
Click to expand...
Click to collapse
Yes my phone is a N9208 Note 5 how is that relevant?
I think the problem is that I have a custom rom now Dr Ketan's M12 and this rom makes the phone software say is a N920S and maybe the Sammy server rejects my serial number and model of SM-N9208 because the phone currently says it's a SM-N920S
Maybe this is not this reason but it's all I can think of and currently have no way of going back to a stock rom since Odin never gets past 0.05% progress bar on a rom flash on this phone! (though I can flash recovery and root fine in Odin... ie it's communicating
???
Related
I tried to root my phone using universal-androot and it was successful. After that i flashed clockworkmod recovery. And i thought of making a back-up of my current stock-ROM and there it was... my phone suddenly got blacked-out. Now i cant even turn-on my phone. I tried all the different possibilities like holding 'vol down+home+power', 'vol up+vol down+power', dint work .!! help me please
I was told that you can't backup stock roms using clockworkmod.
Can you turn the phone on in any mode? normal/download/anything else?
Nop !! can't do anything. Tried all the patterns.
did the phone do anything before it turned off? or did it just go blank?
Also, can you remember what clockworkmod was saying before it went blank? e.g. what processes it was undergoing?
I think the problem is with clockworkmod recovery. Coz while trying to flash the recovery, I was asked to select the phone model, but 'samsung galaxy 5' was not in the list, So i selected 'Huawei model' or something in order complete the installation! but still the installation was successful. And when i clicked 'Backup my current ROM' the phone suddenly got switched-off.
Were you trying to install the recovery from rom manager?
You need to install it via odin for the Galaxy 5.
Your phone probably needs a time+materials trip to the service centre.
Yeah, flashing that can't have done your phone any good Rom manager doesnt (yet) support our phone
have you tried firmware download mode?
remove your battery, put it back on
now press volume down, central select button and power.
keep holding till a yellow sign appears with android and a broom
now go to odin and flash CWM recovery or other rom.
madteam.co forum has lots of info about europas
rpadula said:
have you tried firmware download mode?
Click to expand...
Click to collapse
It appears to me he did.
I had the same problem.
I removed the battery for 30 minutes, and removed the SIM. SIM removal was necessary.
Remove the SD Card too; it might help.
rpadula said:
have you tried firmware download mode?
remove your battery, put it back on
now press volume down, central select button and power.
keep holding till a yellow sign appears with android and a broom
now go to odin and flash CWM recovery or other rom.
madteam.co forum has lots of info about europas
Click to expand...
Click to collapse
guys i 2 did the same dumb thing now is there any way of restoring it
i have the same problem...please help
ya, i did too. your hooped. send it in. I just got my replacement but need to know how to back up baseband cause all the ones available give me issues here in Canada. Anyone seen I5500MUGKE3 ? Virgin mobile canada still using eclair
Has anyone tried a jig to get it to Download mode?
Fully bricked! Now you can build a new home. Bye
Solve problem
proimage said:
i have the same problem...please help
Click to expand...
Click to collapse
Singura solutie e serviceúl Placa de baza se face scrum Am patit-o de 2 ori cu backupul Acum il astept iar sa vina din service
VibrantWind said:
Has anyone tried a jig to get it to Download mode?
Click to expand...
Click to collapse
Yes I tried it and it didn't work does maybe a new battery make the G5 working again?
sorry if english was bad
Its the piece of crap that is ROM manager. I bricked mine too, only way to fix is by sending it back to Samsung, mine was under warranty so I was ok
Priezti said:
Its the piece of crap that is ROM manager. I bricked mine too, only way to fix is by sending it back to Samsung, mine was under warranty so I was ok
Click to expand...
Click to collapse
My too! Luckily me!
Sent from Outerspace
Hi guys, I am new to this rooting thing and android/samsung in general. I bought this Galaxy S5 as a gift for a relative in Vietnam because she is paying about $200 total in monthly payments for a Galaxy S3. I have tried searching the forums too but I can't find the answers I am looking for.
It is model SM-G900T Android 6.0.1
I can go into download mode and all that but the root files I have (ODIN)don't work, it just goes back to the "recovery is not seandroid enforcing" screen.
I think my root failed because I was watching tutorials on how to root it from like a year ago. I am trying to get a language pack for this phone so I can change it to Vietnamese. Can anyone link me the proper procedures and download links? I'll pay you like $20 in paypal if it works... Please assist, thanks!
Pull the Back of the Phone off, Remove the battery Verify you have a SM-G900T and not a G900T1 or G900T3. Look at the battery to see if it was Made in China too (as a precaution)
You need to Go back to the Stock ROM of the phone, Get Odin Version 3.11.1, ff you don't have the samsung driver already, get it, then get the Android Version you had-What ever baseband it was before you goofed it up. Put the Phone into download mode -Press and Hold Volume Down, Home Button, and then Press and Hold Power until you see the the Download option, then hit install ROM, Hook Phone Up to a computer and then Run Odin and select the ROM on the AP button
once that is done,
follow these directions to the T
https://forum.xda-developers.com/tm...l/root-how-to-root-sm-g900t-firmware-t3358190
.
You will need to do a carrier unlock to the phone to work in other countries since this phone is designed to work in the US only.
By the way we are not accepting any money here, this forum is free so the help is too.
eidairaman1 said:
Pull the Back of the Phone off, Remove the battery Verify you have a SM-G900T and not a G900T1 or G900T3. Look at the battery to see if it was Made in China too (as a precaution)
You need to Go back to the Stock ROM of the phone, Get Odin Version 3.11.1, ff you don't have the samsung driver already, get it, then get the Android Version you had-What ever baseband it was before you goofed it up. Put the Phone into download mode -Press and Hold Volume Down, Home Button, and then Press and Hold Power until you see the the Download option, then hit install ROM, Hook Phone Up to a computer and then Run Odin and select the ROM on the AP button
once that is done,
follow these directions to the T
https://forum.xda-developers.com/tm...l/root-how-to-root-sm-g900t-firmware-t3358190
.
You will need to do a carrier unlock to the phone to work in other countries since this phone is designed to work in the US only.
By the way we are not accepting any money here, this forum is free so the help is too.
Click to expand...
Click to collapse
Hey bro, is there a way to see which baseband I have if I cant check it on my device? If I can't, is it possible to try every stock rom until I get the correct one or will I just mess it up more?
Michaeln93 said:
Hey bro, is there a way to see which baseband I have if I cant check it on my device? If I can't, is it possible to try every stock rom until I get the correct one or will I just mess it up more?
Click to expand...
Click to collapse
since your phone is goofed up, I would verify if you have a SM-G900T or G900T1, etc go to sammobile.com and enter SM-G900T, T1 etc which ever phone you have, just grab a 4.4.2 Version, enter download mode and open up ODIN
eidairaman1 said:
since your phone is goofed up, I would verify if you have a SM-G900T or G900T1, etc go to sammobile.com and enter SM-G900T, T1 etc which ever phone you have, just grab a 4.4.2 Version, enter download mode and open up ODIN
Click to expand...
Click to collapse
Hello, sorry If I am being bothersome but I did what you told me. The phone boots now but it's stuck at the "T-Mobile 4G LTE" screen (screen before it goes into the lock/swipe screen). How long should it stay there?
Michaeln93 said:
Hello, sorry If I am being bothersome but I did what you told me. The phone boots now but it's stuck at the "T-Mobile 4G LTE" screen (screen before it goes into the lock/swipe screen). How long should it stay there?
Click to expand...
Click to collapse
if it doesnt boot up in 15 minutes, put the phone into stock recovery by shutting off the phone, press and hold the volume up key, home key and power key until it says recovery, once there wipe the cache and also do a factory reset.
then the phone should boot, leave it be at that point
Title says it all, after having gone through a ton of different processes trying to fix this, scouring the internet and finding what i thought were solutions, I just simply cant get past the boot screen...
So I find myself here, in what i hope is the right place to be.
I will explain what happens and what i've done to try and fix this, and if there is anything I can do to help assist any of you that may know the answer to my problem, please just let me know what i need to do, whether it be posting a video of what is happening on my phone or whatever, just let me know.
So I rooted my s6 (tmobile) a couple weeks ago, which was the first time i had rooted a phone in probably 8 years, but it was super easy this time compared to back then.
Then I made the mistake of turning off Custom OEM lock yesterday for some reason, not even sure why i did it, and now im here. Unable to flash anything, it always fails.
I've tried flashing the stock firmware, the latest firmware, and my custom firmware again, all to no avail. Maybe I'm not flashing the correct firmware from Sammobile, not sure, just frustrated to my wits end and could use a little bit of help, anyt suggest at all I am willing to try. I did make a backup on Titanium, if I can just get back into the phone I can recover everything i hope, but if i lose everything then so be it.
Thanks for reading, look forward to hearing from you guys
Hi , send me private your imei and S/N number I will look what I can do for you .
Teddy Lo said:
Hi , send me private your imei and S/N number I will look what I can do for you .
Click to expand...
Click to collapse
man I gladly will i just dont know how i can find it, phone wont turn on and there is no removable back or anything...ideas?
dinh1999 said:
man I gladly will i just dont know how i can find it, phone wont turn on and there is no removable back or anything...ideas?
Click to expand...
Click to collapse
Do you have on the battery glass on the botom that information ? like for example Made in Vietnam by Samsung
Imei: 357804/07/6500471 and S/N : RFTxxxxxxx ?
Teddy Lo said:
Do you have on the battery glass on the botom that information ? like for example Made in Vietnam by Samsung
Imei: 357804/07/6500471 and S/N : RFTxxxxxxx ?
Click to expand...
Click to collapse
I sent you a PM, sorry for taking so long
Try to flash one of this :
Firmware 1 :
https://updato.com/firmware-archive-select-model?record=62B4939F374A11E89F15FA163EE8F90B
or
Firmware 2 :
https://updato.com/firmware-archive-select-model?record=09AE03D9D1A211E7A5F9FA163EE8F90B
If booth fail in Odin send me screenshot on PM log of Odin
Teddy Lo said:
Try to flash one of this :
Firmware 1 :
https://updato.com/firmware-archive-select-model?record=62B4939F374A11E89F15FA163EE8F90B
or
Firmware 2 :
https://updato.com/firmware-archive-select-model?record=09AE03D9D1A211E7A5F9FA163EE8F90B
If booth fail in Odin send me screenshot on PM log of Odin
Click to expand...
Click to collapse
that top download worked, it let me flash it finally, but now its just stuck at the samsung screen...I got into recovery once, ive tried to get the phone to just turn on and it wont.
Hello,
I've purchased a Galaxy Tab S6 (SM-T865N) International version, mainly to use it with with 4G in US on Xfinity Mobile. I received the tablet, inserted the SIM card and it was working 'relatively' on the network. Every now & then I would get a message 'failed to register to network', but for the most part, mobile data is working.
Since it is a Korea version, certain things don't work. Nothing major, but I would like to make it perfect. Certain User update posts in the Galaxy store display in Korean Language, and the weather app is slightly limited, with the error 'not available outside of Korea'.
I did some searching and found other firmware available for this exact model on Sammobile. My country (US) is not supported, but I would like to try the UK firmware, if nothing else, to fix some of the language issues. I downloaded the UK firmware package and Odin (3.13 & 3.14.1). I installed the Samsung drivers. I booted the tablet into recovery by holding 'power & volume up' then connected it to the computer. Odin WILL NOT found the tablet. I rebooted into the normal OS and connected it and Odin then found it, but obviously that doesn't work. I can not get Odin to connect while in recovery.
Does anyone have suggestions on what might be happening?
And maybe all this effort isn't worth it either, hard telling whether it'll work better or worse with the UK firmware on it. Any tips?
It's been several years since I did this sort of thing, so I'm a little rusty. I thought this would be a simple procedure.
it sounds to me like you are not putting it into download / Odin mode, but I could be wrong. I haven't tried to use Odin on this tablet yet, but was actually about to do this same thing as well, as my device has an origin CSC of singapore, and hasn't had an official update in almost 2 months, so I was going to flash the UK version as well.
---------- Post added at 07:58 PM ---------- Previous post was at 07:51 PM ----------
So I just tested it on my tablet, here is what you need to do:
Power off the device
Press and hold the Volume up button and then press and hold the power button
When you see the initial boot screen, release the power button, but keep holding volume button
When you get to the recovery screen, you need to use the volume up / down buttons to highlight the option that has "bootloader" in the title, and press the power button to select it.
Then you should see a screen that says "Download" or something like that.
Plug in USB, and Odin should see the device.
Yeah, you're booting into recovery, you need to boot into Download mode - Hold both volume up and down whilst inserting the USB-C cable to enter Download mode.
Your correct
bartleby999 said:
Yeah, you're booting into recovery, you need to boot into Download mode - Hold both volume up and down whilst inserting the USB-C cable to enter Download mode.
Click to expand...
Click to collapse
Your Correct. Device needs to be plugged into the pc for it to boot to the screen that shows all the info. I wonder why they made this a requirement. Its very unintuitive. I also didn't see it documented anywhere. How did you find out about this ? Thanks again for the help!
naruto.ninjakid said:
Your Correct. Device needs to be plugged into the pc for it to boot to the screen that shows all the info. I wonder why they made this a requirement. Its very unintuitive. I also didn't see it documented anywhere. How did you find out about this ? Thanks again for the help!
Click to expand...
Click to collapse
You wouldn't happen to have that firmwire file handy / a way to share it online would you? Sammobile's free download server is down right now, and I was going to try to flash it this weekend.
naruto.ninjakid said:
Your Correct. Device needs to be plugged into the pc for it to boot to the screen that shows all the info. I wonder why they made this a requirement. Its very unintuitive. I also didn't see it documented anywhere. How did you find out about this ? Thanks again for the help!
Click to expand...
Click to collapse
I did a lot of reading before I rooted this Tab and that piece of Info came from This thread.
fallingup said:
You wouldn't happen to have that firmwire file handy / a way to share it online would you? Sammobile's free download server is down right now, and I was going to try to flash it this weekend.
Click to expand...
Click to collapse
Sorry, I dont. I meant to make that post in another thread. I have not flashed anything on my device yet.
I have the same Korean model SM-T865N 4G LTE version with the latest firmware.
Can I flash it using Odin with the latest frimware for UAE?
I mean the one with CSC code XSG (XSG - United Arab Em)
AP VERSION T865XXU2BTC7
CSC VERSION T865OJM2BTC7
Besides i have another issue with my speakers as they are not working for some reason? I tried reset both soft and hard without luck. It always get stuck on rebooting many times but after many times i got it to reboot BUT i can only have sound from bluetooth headphones!!
buafnan said:
I have the same Korean model SM-T865N 4G LTE version with the latest firmware.
Can I flash it using Odin with the latest frimware for UAE?
I mean the one with CSC code XSG (XSG - United Arab Em)
AP VERSION T865XXU2BTC7
CSC VERSION T865OJM2BTC7
Besides i have another issue with my speakers as they are not working for some reason? I tried reset both soft and hard without luck. It always get stuck on rebooting many times but after many times i got it to reboot BUT i can only have sound from bluetooth headphones!!
Click to expand...
Click to collapse
Did you able to flash that firmware on your tablet?
IF you mean did I succeed in flashing it through Odin then yes BUT unfortunately I couldn't get it to reboot correctly & it takes a lot of time trying to reboot but still no luck. So, I took it to a repair shop & they told me it needs new motherboard !! How can this be even possible IF I still can get it to connect to Odin and download the firmware successfully BUT no luck in getting it to reboot correctly!!
buafnan said:
IF you mean did I succeed in flashing it through Odin then yes BUT unfortunately I couldn't get it to reboot correctly & it takes a lot of time trying to reboot but still no luck. So, I took it to a repair shop & they told me it needs new motherboard !! How can this be even possible IF I still can get it to connect to Odin and download the firmware successfully BUT no luck in getting it to reboot correctly!!
Click to expand...
Click to collapse
Have you tried reflashing the old firmware of your country? Weird that its not working.
I did try that and managed to flash it successfully to the old firmware using Odin but unfortunately I still couldn't get it past a full reboot as it got stuck after a long time and it takes me to the Android System Recovery screen wherein also tried to 'wipe cache partition.’ and try reboot again but I still end up with the recovery screen!
buafnan said:
I did try that and managed to flash it successfully to the old firmware using Odin but unfortunately I still couldn't get it past a full reboot as it got stuck after a long time and it takes me to the Android System Recovery screen wherein also tried to 'wipe cache partition.’ and try reboot again but I still end up with the recovery screen!
Click to expand...
Click to collapse
Can't you put in a warranty claim ? Here where i am based i had a new battery, and new screen installed from samsung! this was a Galaxy S8+ was well over 2 years old they did it for free! New screen and new battery! My Note 9 is going this monday for a new battery my Tab S6 works flawlessly so don't need to send that in! but i'm sure if you ring up Samsung they will replace the motherboard for free as it's not even 12 months old!
Hello ,
My friend has issue with his huawei p20 lite (ANE LX1).
He poked needle in earphones connector and his screen went black.
When the phone is booted to the android os, I can see for a split second (less than 5ms) screen on what is it, which is impossible to naviage since i have to press power button multiple times to show once.
But the Fastboot&Rescue mode as well as download mode works fine.
Soo How can i flash rom+firmware on it, since mostly what I find on google is "Exit from Rescure&Fasboot mode
WoW2ndJob said:
Hello ,
My friend has issue with his huawei p20 lite (ANE LX1).
He poked needle in earphones connector and his screen went black.
When the phone is booted to the android os, I can see for a split second (less than 5ms) screen on what is it, which is impossible to naviage since i have to press power button multiple times to show once.
But the Fastboot&Rescue mode as well as download mode works fine.
Soo How can i flash rom+firmware on it, since mostly what I find on google is "Exit from Rescure&Fasboot mode
Click to expand...
Click to collapse
Hi,
IMO the best solution is searching for the Service rom on https://androidhost.ru/ (type ANE- or ANNE- , the correct FW depends on the current version of Android and your region - Cxxx), and doing the dload method from SD card. Process will erase all the data from your device !
Before you do anything, read carefully Software Upgrade Guidline in "ReleaseDoc" . With Service ROM you will get full stock with locked bootloader.
Funky enough will download tomorrow, since my network speed is crap.
Another thing while holding vol+ with vol- and power button it gives me in ADB recovery, since i cannot see the screen i dont know what it shows.
Also to mention I've pulled from fastboot all info
product model ANE-LX1
build ANE-LX1 9.1.0.306
hw/eu
And the Cxxx is matching except the last 2 T8 for example.
I think I've found culprit. Seems like the backlight is dead for some apparent reason or totally turned down, not even In dark i can see the screen, except on the lock screen where i see the warning the phone has been recently turned off then on input password.
But why is then working absolutley fine in fastboot&rescue mode?
If you do not belive me ill upload pictures.
https://ibb.co/MML06Vb - normal
https://ibb.co/ZL3wtJn -rescue mode.
WoW2ndJob said:
https://ibb.co/MML06Vb - normal
https://ibb.co/ZL3wtJn -rescue mode.
Click to expand...
Click to collapse
I believe you , but if it's HW problem (damaged motherboard, short circuit etc.), I can't help you anymore. Have you tried dload method with Service ROM?
I have my Huawei p20 lite ANE-LX2 stuck on logo, bootloader is lock at the same time. Can i perform DLOAD method through system Recovery? to flash stock firmware? thanks
AmorPower said:
I have my Huawei p20 lite ANE-LX2 stuck on logo, bootloader is lock at the same time. Can i perform DLOAD method through system Recovery? to flash stock firmware? thanks
Click to expand...
Click to collapse
Yes, You can (process will erase all Your data) . Use Service ROM only!
bozka1 said:
Yes, You can (process will erase all Your data) . Use Service ROM only!
Click to expand...
Click to collapse
Thank you! gotta do this later and give an update. God bless
AmorPower said:
Thank you! gotta do this later and give an update. God bless
Click to expand...
Click to collapse
my phone can't enter recovery mode, it only booting constantly