Hello everebody!
My name is Walace and I'm from Brazil.
So, I've a SE x10 mini with kernel 2.6.29.6-nAa-06 and MiniCM7-2.1.4 and I don't no what happened, the accelerometer doesn't work anymore.
Please help me!
thanks.
Walace
walace.elias said:
Hello everebody!
My name is Walace and I'm from Brazil.
So, I've a SE x10 mini with kernel 2.6.29.6-nAa-06 and MiniCM7-2.1.4 and I don't no what happened, the accelerometer doesn't work anymore.
Please help me!
thanks.
Walace
Click to expand...
Click to collapse
first of all make a backup and wipe your phone and then install an up to date kernel as well as rom, i think this might solve the problem.
My accelerometer doesn't work too
NAA knows this probleme.
NAA have changed the driver of the sensor in the last MiniCM ( 2.1.4,2.1.5,.2.1.6,2.1.7 ) and now my sensor doesn t work. ( and for some other users )
### MiniCM7-2.1.4
* Sensors are now built from source (no compat mode). No sensor delays
* Many CM fixes related to stability, bugs and new features
* Disabled automatic light sensor screen dimming
* Automatic brightness now works (select tickbox from display settings and also allow light decrease from CM Display Settings)
* Liblights fixes
Click to expand...
Click to collapse
I hope NAA is working on this probleme
But you can do that for now :
Open MiniCM 2.1.3 with winrar :
You need : libsensorservice.so ( system => lib ) and sensors.default.so ( system => lib => hw ); sensors.goldfish.so ( system => lib => hw )
Extract this 3 files .
Now, open the new MiniCM ( ex : 2.1.7 the lastest ) with winrar :
-go to system => lib; delete libsensorservice.so and add libsensorservice.so ( that s taken from MiniCM 2.1.3 )
-go to system => lib => hw; delete sensors.goldfish.so and sensors.robyn.so; and add sensors.default.so and sensors.goldfish.so ( that s taken from MiniCM 2.1.3 )
Now, flash your phone with the new MiniCM that is created, and your phone will use the compatibility driver, and your acceleromter must work
TESTED with my phone !
PS: Sorry for my bad english
Well,
s0ftcorn I tried what you said but doesn't work. So, I did what SpliFFdu95240 and doesn't work too!
I installed the ROM MiniCm7 2.1.3 and now my cell is working very well.
I'll wait a new ROM until the problem will be solved.
Thank's
You must do a mistake; if I can ( but mu is dead ), I will try to upload my version of MiniCM
EDIT: This is my Modify version with compatibility driver
http://depositfiles.com/files/axqjrblfd
Don t forget, for a fresh install : ( you will lose all data )
Flash your phone with the last NAA kernel ( 09 )
Turn on your phone and go to recovery
Wipe data/factor reset
Wipe cache partition
=>advanced , Wipe dalvik cache
Install MiniCM ( modified )
Install gapps
Sorry for double post !
I make a new thread with poll, please go here http://forum.xda-developers.com/showthread.php?t=1477205
Any chance to use it on other ROMs or at least.. Is it possible to port same script from other ROM to second ROM (like StornMix which has accelerometer sensor problem)?
I don t know, ask to the autor of the ROM.
It s NAA who said to me to do that, so I don t know, sorry
Hi all,
I make this thread to poll how many people have sensors problem with MiniCM7. ( if you have trouble, post a message, because i do a mistake with the poll, and i can t see we have trouble , thanks )
My accelerometer doesn't work
NAA knows this probleme.
NAA have changed the driver of the sensor in the last MiniCM ( 2.1.4,2.1.5,.2.1.6,2.1.7 ) and now my sensor doesn t work. ( and for some other users )
### MiniCM7-2.1.4
* Sensors are now built from source (no compat mode). No sensor delays
* Many CM fixes related to stability, bugs and new features
* Disabled automatic light sensor screen dimming
* Automatic brightness now works (select tickbox from display settings and also allow light decrease from CM Display Settings)
* Liblights fixes
Click to expand...
Click to collapse
I hope NAA is working on this probleme
But you can do that for now :
Open MiniCM 2.1.3 with winrar :
You need : libsensorservice.so ( system => lib ) and sensors.default.so ( system => lib => hw ); sensors.goldfish.so ( system => lib => hw )
Extract this 3 files .
Now, open the new MiniCM ( ex : 2.1.7 the lastest ) with winrar :
-go to system => lib; delete libsensorservice.so and add libsensorservice.so ( that s taken from MiniCM 2.1.3 )
-go to system => lib => hw; delete sensors.goldfish.so and sensors.robyn.so; and add sensors.default.so and sensors.goldfish.so ( that s taken from MiniCM 2.1.3 )
Now, flash your phone with the new MiniCM that is created, and your phone will use the compatibility driver, and your acceleromter must work
TESTED with my phone !
PS: This is my Modify version with compatibility driver
http://depositfiles.com/files/axqjrblfd
Don t forget, for a fresh install : ( you will lose all data )
Flash your phone with the last NAA kernel ( 09 )
Turn on your phone and go to recovery
Wipe data/factor reset
Wipe cache partition
=>advanced , Wipe dalvik cache
Install MiniCM ( modified )
Install gapps
If some people have same problem, and if my modified MiniCM works for other; I will upload the new MiniCM modified.
Just ask, and i will do
Original thread : http://forum.xda-developers.com/showthread.php?t=1456028
http://code.google.com/p/minicm/iss...Milestone Owner Summary&groupby=&sort=&id=347
Sorry for my bad English
Hi,
I ve trouble with my sensor / accelerometer ( again and again ).; he doesn t work
This is my adb logcat and dmesg with MiniCM 2.1.9 + K 11
ADB logcat http://www.mirorii.com/fichier/23/495158/logcat_2-1-9-txt.html
DMESG http://www.mirorii.com/fichier/41/495159/dmesg_minicm_2-1-9-txt.html
And I use MiniCM 2.1.9 with older lib ( from MiniCM 2.1.3, libsensorservice.so ( system/lib ) and sensors.default.so + sensors.goldfish.so ( system/lib/hw ) ) and my sensor / accelerometer works ( in compat mode )
This my adb logcat and dmesg with MiniCM 2.1.9 with old lib + K 11
ADB logcat http://www.mirorii.com/fichier/91/495168/logcat_2-1-9_MOD-txt.html
DMESG http://www.mirorii.com/fichier/40/495172/dmesg_minicm_2-1-9_MOD-txt.html
I hope someone can help me
Some of you don't see it. but there is a clear difference between 2.1 and custom.
small lags for starters.
no filtering secondly.
Also the source SE drops is mostly missing bits.
I'm really not trolling the developer..
To be honest every rom since 2.2.1... has Accl issue's.
Custom kernel or not.
My accelerometer works.. fine.. good enough.
This is my MiniCM7 2.1.9 modify
http://www.mirorii.com/fichier/64/495974/MiniCM7-2-1-9-MOD-zip.html
SpliFFdu95240 said:
This my MiniCM7 2.1.9 modify
http://www.mirorii.com/fichier/64/495974/MiniCM7-2-1-9-MOD-zip.html
Click to expand...
Click to collapse
?? explain.
Is this a mod for the Accelerometer?
SpliFFdu95240 said:
Hi all,
I make this thread to poll how many people have sensors problem with MiniCM7. ( if you have trouble, post a message, because i do a mistake with the poll, and i can t see we have trouble , thanks )
My accelerometer doesn't work
NAA knows this probleme.
NAA have changed the driver of the sensor in the last MiniCM ( 2.1.4,2.1.5,.2.1.6,2.1.7 ) and now my sensor doesn t work. ( and for some other users )
I hope NAA is working on this probleme
But you can do that for now :
Open MiniCM 2.1.3 with winrar :
You need : libsensorservice.so ( system => lib ) and sensors.default.so ( system => lib => hw ); sensors.goldfish.so ( system => lib => hw )
Extract this 3 files .
Now, open the new MiniCM ( ex : 2.1.7 the lastest ) with winrar :
-go to system => lib; delete libsensorservice.so and add libsensorservice.so ( that s taken from MiniCM 2.1.3 )
-go to system => lib => hw; delete sensors.goldfish.so and sensors.robyn.so; and add sensors.default.so and sensors.goldfish.so ( that s taken from MiniCM 2.1.3 )
Now, flash your phone with the new MiniCM that is created, and your phone will use the compatibility driver, and your acceleromter must work
TESTED with my phone !
PS: This is my Modify version with compatibility driver
http://depositfiles.com/files/axqjrblfd
Don t forget, for a fresh install : ( you will lose all data )
Flash your phone with the last NAA kernel ( 09 )
Turn on your phone and go to recovery
Wipe data/factor reset
Wipe cache partition
=>advanced , Wipe dalvik cache
Install MiniCM ( modified )
Install gapps
If some people have same problem, and if my modified MiniCM works for other; I will upload the new MiniCM modified.
Just ask, and i will do
Original thread : http://forum.xda-developers.com/showthread.php?t=1456028
http://code.google.com/p/minicm/iss...Milestone Owner Summary&groupby=&sort=&id=347
Sorry for my bad English
Click to expand...
Click to collapse
Same for 2.1.9
It's going fine in my MiniPro with MiniCM7 2.1.9 and nAa kernel v11.
i have problem with the new sensor drivers too! They were working at the beginig but not now! I have the same problem with ics!
jccz said:
It's going fine in my MiniPro with MiniCM7 2.1.9 and nAa kernel v11.
Click to expand...
Click to collapse
Same here mini pro naa v11 minicm 2.1.9 all sensors working fine
Sent from my U20i using xda premium
stelios97, maybe you can ask to NAA if he can help us ( because your are a Recognized Developer ).
I ve already ask to NAA, but I m not sure he work on it ( because I m the only one who spoke about this problem )
Sorry for my bad English
Accelometer problem
Since minicm 2.1.3 I have the same problem too...Sensors don't respond at all...I had asked nAa but we couldn't find a solution and I thought I was the only one with this problem...
I have no sensors problems at all, sometimes just a little lag
I have that problem too. In alarmdroid, alarm can be stopped via flip or shake - I am used to that and now it doesn't work. App worked in original system, in SonyStyle but when I switched to this, it stopped working.
EDIT: Is there any way, how to use posted fix without system wipe? I just (friday) installed new rom, all apps, and then set them up properly - it took me some time and I don't have much of that right now. I don't really want to wipe again
Tested mine extensively...
1.What is your default cpu settings?
2. Do you have a screen off profile?
I am sorry, I just missed something in app - it works when alarm sounds, but it doesn't work in app, when I try to setup it. I have checked it via some sensor monitor and it works well.
I jumped to conclusion, because previously, it worked in that app even in setup mode and now I presumed, that it doesn't due to system changes.
GonziHere said:
I am sorry, I just missed something in app - it works when alarm sounds, but it doesn't work in app, when I try to setup it. I have checked it via some sensor monitor and it works well.
I jumped to conclusion, because previously, it worked in that app even in setup mode
Click to expand...
Click to collapse
I use Alarmdroid too (and MiniCM 2.2.0), and I have exactly the same issues: sensors don't work in app setup, but they do when an alarm sounds or when testing with other apps.
Sent from my E10i using XDA
I had this problem back in version 2.1.1... the sensors didn't work at all... I put it in the miniCM thread and n4a told me to do a full wipe, which I did, and now everything works like a charm ^^.
Sent from my E10i using xda premium
I have this problem since I flashed cm 10.. I then downgraded to cm7 but the problem persists. Here's the question : can I just replace the files that where posted on the first post without having to flash the rom again? So just replace the files...
Send from beneath my cloak of magic
Hi
I have X10 mini MIUI v3 | Stable 3 | DEC 17-2012 rom but
1-messaging not support persian and arabic
for example:
this>"رضا" show like>"اضر"
2- sensors not working.
3-the folder named"theme" in /data/system also had been created.and when I am editing lock screen thems in setting ,themes .the lock screen is bigger than my screen resolution .
how can I fix this problems ?
help me please!:crying::crying::crying:
sorry for my bad English .
1 bug
gps also could not initialized .
2 more bugs
1-name of folders when I install root explorer didn't show
2-system file explorer some time show force close.
OK. Thanks for reporting bugs. I am working on it, so give me some time to fix it.
Not installed with permissions needed for binding widgets touchwiz FIX
Im Gonna show you how to fix ( Not installed with permissions needed for binding widgets ) in Touchwiz launcher
You just need :
- Root explorer ( the file below )
- mount the system r\w ( you cant simply do it from the root explorer )
Now what should we do ??!
you just need to watch this video an do the same in the video
Watch : youtu.be/PbHVKcffctA
BY : Jawad Twam ( Android Man )
Jawad Twam said:
Not installed with permissions needed for binding widgets touchwiz FIX
Im Gonna show you how to fix ( Not installed with permissions needed for binding widgets ) in Touchwiz launcher
You just need :
- Root explorer ( the file below )
- mount the system r\w ( you cant simply do it from the root explorer )
Now what should we do ??!
you just need to watch this video an do the same in the video
Watch : youtu.be/PbHVKcffctA
BY : Jawad Twam ( Android Man )
Click to expand...
Click to collapse
Yaaaa.. It's Work ... Thanks///\\\ Just Put SecLauncher2.apk from system/app to system/priv-app....