I do not know if this is the appropriate category to ask but i have a problem with my phone Lenovo P780.
I flashed several Roms during my trials to solve some battery issues and once i forgot to press the Da_DLAll with SumCheck button and since i get a dll error, when I am trying to reflash my mobile i get an error s_ft_readback_fail (4009) at flash tool and stops the flashing. The hard reset does not work either.... So my phone is practically dead what can i do??
thank you
Related
i got a problem on my Lenovo P780, i can turn it on normally but all process stopped and it keep warning it with pop up and after a few minutes it turns into bootloop . i tried flashing with every ROM and every SP Flashtool versions, but i got the same error if i check the 'DA DL All With Check Sum'. I completed the flash till the green circle when i uncheck it but nothing happen to my phone. I'm searching everywhere for the solution.. but no solution at all.. please help me..!!!
Noticed:
i've got the preload not selected in every ROM that i tried to flashed with. Is it a problem? so i have to choose it manually the preload.img
Please help...
priatempodoeloe said:
i got a problem on my Lenovo P780, i can turn it on normally but all process stopped and it keep warning it with pop up and after a few minutes it turns into bootloop . i tried flashing with every ROM and every SP Flashtool versions, but i got the same error if i check the 'DA DL All With Check Sum'. I completed the flash till the green circle when i uncheck it but nothing happen to my phone. I'm searching everywhere for the solution.. but no solution at all.. please help me..!!!
Noticed:
i've got the preload not selected in every ROM that i tried to flashed with. Is it a problem? so i have to choose it manually the preload.img
Please help...
Click to expand...
Click to collapse
Get copy of the rom that is not corrupted. One cause of corruption is a bad download of the rom.
As it's a checksum error, see if there's an MD5 hash for the ROM file on the download site, if so run an MD5 on what you've downloaded and check if the hash you get matches the one on the download site.
Also deleting the checksum.ini file from the firmware folder removes these errors.
I get the same problem even after deleting that file. In other posts/sites, one mentions that in the ".ini " file change the switch from "1" to "0". For me that too didn't work. I tried 3 ROM files, and all can't be corrupt.
But please try these, as they work with some ROMs.
priatempodoeloe said:
i got a problem on my Lenovo P780, i can turn it on normally but all process stopped and it keep warning it with pop up and after a few minutes it turns into bootloop . i tried flashing with every ROM and every SP Flashtool versions, but i got the same error if i check the 'DA DL All With Check Sum'. I completed the flash till the green circle when i uncheck it but nothing happen to my phone. I'm searching everywhere for the solution.. but no solution at all.. please help me..!!!
Noticed:
i've got the preload not selected in every ROM that i tried to flashed with. Is it a problem? so i have to choose it manually the preload.img
Please help...
Click to expand...
Click to collapse
Use one of this 2 SP Flash Tools. Reccomended V5. See if that preload is loading.
Link: https://drive.google.com/folderview?id=0B_B98oK4DpK1S1l2bXRkTGxhVFk&usp=sharing
Hey guys i am tired of searching for solutions online (this is my first article)
so my canvas hd was stuck in bootloop i tried flashing it with sp flash but the brom error (5096) always stops the process .
I did a memory test and it says that nand flash was not detected . My phone is now formatted and it wont even boot I tried flashing 2 stock roms and a custom rom but the same brom error comes .
I have also tried flashing the files one at a time but only preloader
I dont have a backup of the phone . experts please help!!!!!!!!!
HI,
Did you solve your problem?
I have exactly the same problem with my phone.
An Brom Error 5069 appears after red and purple progress bar in Flashtool.
Any update on this...I m also getting same problem....
ok guys calm down ! I had this problem before. But step out in another way. But 1st let me know how u did things ....
Hello guys,
this is my first post here!
I recently got Idol 2 from my brother to use and seeing as it says on GSM arena that it has KitKat I wanted to flash it to get rid of slow 4.2.2.
I used SP flashtool and on youtube I found how and also the ROM. I flashed it, first I used format all except bootloader and after flashing it wont switch on.
PC can see it and I tried every guide, I have 6 roms, many of them russian and every time I try flashing I get
brom error sft enable dram failed 4032. I somehow solved that but not I get brom error s_ft_enable_dram_fail (0xfc0) every time I try flashing.
I have a boat load of drives, I used USBDEVIEW to uninstall them and I have reinstalled them 47 times, always same error. Flashing wont start.
What am I doing wrong? IS there anyone who knows? :crying:
I really wanna fix it because I dont have a phone anymore..... I had to sell my OnePlus 3 cause of money issues and cannot afford a new one.....
Thanks in advance!
Hi there,
I'm still new to this (started in 2014 with A706), therefore i implore that you be patient with me.
i have now a Lenovo S860, which cannot boot to the android user interface.
It gets stuck at the Lenovo logo (not bootloop) with a message at the bottom left corner "TOOL DL IMAGE FAIL
uboot is blocking by dl info"
I have tried SP Flash Tool v5.1516, with "Lenovo_S860_ROW_S405_150126" Stock ROM but the following occurs;
1. I selected "Download only" and a message popped up saying "error PMT changed it must be downloaded"
2. Then i selected "Format & Download" and the flashing process stops at 25% and another error message appears " BROM ERROR: S_FT_DOWNLOAD_FAIL (4008)"
I've read many articles around the web, trying many ways, but to no avail.
Could someone from XDA please guide me or share some thoughts on this matter please. And maybe even direct me to the proper thread.
thanking in advance
solomanlye69 said:
Hi there,
I'm still new to this (started in 2014 with A706), therefore i implore that you be patient with me.
i have now a Lenovo S860, which cannot boot to the android user interface.
It gets stuck at the Lenovo logo (not bootloop) with a message at the bottom left corner "TOOL DL IMAGE FAIL
uboot is blocking by dl info"
I have tried SP Flash Tool v5.1516, with "Lenovo_S860_ROW_S405_150126" Stock ROM but the following occurs;
1. I selected "Download only" and a message popped up saying "error PMT changed it must be downloaded"
2. Then i selected "Format & Download" and the flashing process stops at 25% and another error message appears " BROM ERROR: S_FT_DOWNLOAD_FAIL (4008)"
I've read many articles around the web, trying many ways, but to no avail.
Could someone from XDA please guide me or share some thoughts on this matter please. And maybe even direct me to the proper thread.
thanking in advance
Click to expand...
Click to collapse
Hi dear,
I am stuck in the same situation since week.
Exactly same scenario. If u have found any solution, please share.
Thanks bro.
bhaumikkhamar said:
Hi dear,
I am stuck in the same situation since week.
Exactly same scenario. If u have found any solution, please share.
Thanks bro.
Click to expand...
Click to collapse
Same here, I tried everything but my s860 is freezing at 26-30% while flashing stock rom, tried several links, with or without battery, several different versions ot SP Flash tools, every time around 330mb freezes. Can somebody please give us some rom which is smaller 300mb so me and guys before in this post can try flash it? I even tried to move mainboard to another same model, again freezes at 330mb while flashingand Sp tool gives every time different error.
iam also faceing this problem
same here
hi guys, so i got a really big problem with my leeco. first i bricked my leeco by inputting the wrong code trying to unlock the bootloader, so i used the sp tool to try and flash the unbrick rom found in other threads....i did everything correctly, unticked the recovery and boot and the rest of the stuff but after the flashing process begins after 3mins ,it would stops and gives me and error and the colour of the flashing process below never changed to yellow still remained red till it gave out and error so i panicked and stupidly used the auto flash part of the sp flash tool , now anytime i try to flash the unbrick rom with the sp flash tool...it keeps giving me this error
''error status brom cmd send da fail 0xc0060003'' , yes i tried changing the Da_PL_High to Da_br also to Da_PL , It still keeps giving me the same error ''error status brom cmd send da fail 0xc0060003", is the phone completely dead? so i can take my mind off it:crying:
i have read all the leeco threads here tried it all, nothing works....pls any help will be of use, thanks in advance
bizzytheone said:
hi guys, so i got a really big problem with my leeco. first i bricked my leeco by inputting the wrong code trying to unlock the bootloader, so i used the sp tool to try and flash the unbrick rom found in other threads....i did everything correctly, unticked the recovery and boot and the rest of the stuff but after the flashing process begins after 3mins ,it would stops and gives me and error and the colour of the flashing process below never changed to yellow still remained red till it gave out and error so i panicked and stupidly used the auto flash part of the sp flash tool , now anytime i try to flash the unbrick rom with the sp flash tool...it keeps giving me this error
''error status brom cmd send da fail 0xc0060003'' , yes i tried changing the Da_PL_High to Da_br also to Da_PL , It still keeps giving me the same error ''error status brom cmd send da fail 0xc0060003", is the phone completely dead? so i can take my mind off it:crying:
i have read all the leeco threads here tried it all, nothing works....pls any help will be of use, thanks in advance
Click to expand...
Click to collapse