Hey guys i am tired of searching for solutions online (this is my first article)
so my canvas hd was stuck in bootloop i tried flashing it with sp flash but the brom error (5096) always stops the process .
I did a memory test and it says that nand flash was not detected . My phone is now formatted and it wont even boot I tried flashing 2 stock roms and a custom rom but the same brom error comes .
I have also tried flashing the files one at a time but only preloader
I dont have a backup of the phone . experts please help!!!!!!!!!
HI,
Did you solve your problem?
I have exactly the same problem with my phone.
An Brom Error 5069 appears after red and purple progress bar in Flashtool.
Any update on this...I m also getting same problem....
ok guys calm down ! I had this problem before. But step out in another way. But 1st let me know how u did things ....
Related
i got a problem on my Lenovo P780, i can turn it on normally but all process stopped and it keep warning it with pop up and after a few minutes it turns into bootloop . i tried flashing with every ROM and every SP Flashtool versions, but i got the same error if i check the 'DA DL All With Check Sum'. I completed the flash till the green circle when i uncheck it but nothing happen to my phone. I'm searching everywhere for the solution.. but no solution at all.. please help me..!!!
Noticed:
i've got the preload not selected in every ROM that i tried to flashed with. Is it a problem? so i have to choose it manually the preload.img
Please help...
priatempodoeloe said:
i got a problem on my Lenovo P780, i can turn it on normally but all process stopped and it keep warning it with pop up and after a few minutes it turns into bootloop . i tried flashing with every ROM and every SP Flashtool versions, but i got the same error if i check the 'DA DL All With Check Sum'. I completed the flash till the green circle when i uncheck it but nothing happen to my phone. I'm searching everywhere for the solution.. but no solution at all.. please help me..!!!
Noticed:
i've got the preload not selected in every ROM that i tried to flashed with. Is it a problem? so i have to choose it manually the preload.img
Please help...
Click to expand...
Click to collapse
Get copy of the rom that is not corrupted. One cause of corruption is a bad download of the rom.
As it's a checksum error, see if there's an MD5 hash for the ROM file on the download site, if so run an MD5 on what you've downloaded and check if the hash you get matches the one on the download site.
Also deleting the checksum.ini file from the firmware folder removes these errors.
I get the same problem even after deleting that file. In other posts/sites, one mentions that in the ".ini " file change the switch from "1" to "0". For me that too didn't work. I tried 3 ROM files, and all can't be corrupt.
But please try these, as they work with some ROMs.
priatempodoeloe said:
i got a problem on my Lenovo P780, i can turn it on normally but all process stopped and it keep warning it with pop up and after a few minutes it turns into bootloop . i tried flashing with every ROM and every SP Flashtool versions, but i got the same error if i check the 'DA DL All With Check Sum'. I completed the flash till the green circle when i uncheck it but nothing happen to my phone. I'm searching everywhere for the solution.. but no solution at all.. please help me..!!!
Noticed:
i've got the preload not selected in every ROM that i tried to flashed with. Is it a problem? so i have to choose it manually the preload.img
Please help...
Click to expand...
Click to collapse
Use one of this 2 SP Flash Tools. Reccomended V5. See if that preload is loading.
Link: https://drive.google.com/folderview?id=0B_B98oK4DpK1S1l2bXRkTGxhVFk&usp=sharing
Hello guys,
this is my first post here!
I recently got Idol 2 from my brother to use and seeing as it says on GSM arena that it has KitKat I wanted to flash it to get rid of slow 4.2.2.
I used SP flashtool and on youtube I found how and also the ROM. I flashed it, first I used format all except bootloader and after flashing it wont switch on.
PC can see it and I tried every guide, I have 6 roms, many of them russian and every time I try flashing I get
brom error sft enable dram failed 4032. I somehow solved that but not I get brom error s_ft_enable_dram_fail (0xfc0) every time I try flashing.
I have a boat load of drives, I used USBDEVIEW to uninstall them and I have reinstalled them 47 times, always same error. Flashing wont start.
What am I doing wrong? IS there anyone who knows? :crying:
I really wanna fix it because I dont have a phone anymore..... I had to sell my OnePlus 3 cause of money issues and cannot afford a new one.....
Thanks in advance!
hi guys, so i got a really big problem with my leeco. first i bricked my leeco by inputting the wrong code trying to unlock the bootloader, so i used the sp tool to try and flash the unbrick rom found in other threads....i did everything correctly, unticked the recovery and boot and the rest of the stuff but after the flashing process begins after 3mins ,it would stops and gives me and error and the colour of the flashing process below never changed to yellow still remained red till it gave out and error so i panicked and stupidly used the auto flash part of the sp flash tool , now anytime i try to flash the unbrick rom with the sp flash tool...it keeps giving me this error
''error status brom cmd send da fail 0xc0060003'' , yes i tried changing the Da_PL_High to Da_br also to Da_PL , It still keeps giving me the same error ''error status brom cmd send da fail 0xc0060003", is the phone completely dead? so i can take my mind off it:crying:
i have read all the leeco threads here tried it all, nothing works....pls any help will be of use, thanks in advance
bizzytheone said:
hi guys, so i got a really big problem with my leeco. first i bricked my leeco by inputting the wrong code trying to unlock the bootloader, so i used the sp tool to try and flash the unbrick rom found in other threads....i did everything correctly, unticked the recovery and boot and the rest of the stuff but after the flashing process begins after 3mins ,it would stops and gives me and error and the colour of the flashing process below never changed to yellow still remained red till it gave out and error so i panicked and stupidly used the auto flash part of the sp flash tool , now anytime i try to flash the unbrick rom with the sp flash tool...it keeps giving me this error
''error status brom cmd send da fail 0xc0060003'' , yes i tried changing the Da_PL_High to Da_br also to Da_PL , It still keeps giving me the same error ''error status brom cmd send da fail 0xc0060003", is the phone completely dead? so i can take my mind off it:crying:
i have read all the leeco threads here tried it all, nothing works....pls any help will be of use, thanks in advance
Click to expand...
Click to collapse
Actually i was on EUI
Then I Saw a video about JUI Nougat update
It was looking awesome & i tired it to flash with twrp
but after flashing recovery it was asking password
so i google it again n i saw that format the data will to remove that password
i had done it
then i flash JUI after flashing i realized that in JUI there is no support for VOLTE
so now i was trying to get back to eui with the help of YGDP
in that i was getting error something like name issue like i flashed JUI so my phone become c106 completly
in YGDP it was that c106 is the name n i was C1 & the proccess failed
so i tired soo many to recover EUI
but unfortunatly now i'm stuck on jui
and imei numbers corptted
can't connect to wifi
and in twrp recovery there is a error of "failed to mount /persist"
i had also tired to flash with qfil
it was also failed by saying something cannot divede by zero
please give a best solution
Hi , tell me what is your Original model number because I didn't understand clearly , in order to help you I need right informations .
HELLO FREINDS I HAVE A PROBLEM IN MY PHONE THL T6C I HAVE BROKE MY SYSTEM BECAUSE I CHANGE BOOT ANIMATIONS
THEN I HAVE GO TO FLASH HIM WITH SP-FLASH TOOL AND HE GET ME A ERROR
I THINK THE ERROR ABOUT THE PRELOADER PLZ GUYS I NEED HELP I WANT TO GET PHONE BACK TO LIFE
:crying::crying::crying:
Were you able to get your device fixed?
I have a similar problem with my mom's THL T6C which stopped booting out of the blue. It will just get stuck on the THL logo.
I tried flashing with the SP Flashtool which always seems to error out when formating the EMMC.
I have tried flashing all 3 firmwares from the THL site for this device.
Any help would be appreciated.