Actually i was on EUI
Then I Saw a video about JUI Nougat update
It was looking awesome & i tired it to flash with twrp
but after flashing recovery it was asking password
so i google it again n i saw that format the data will to remove that password
i had done it
then i flash JUI after flashing i realized that in JUI there is no support for VOLTE
so now i was trying to get back to eui with the help of YGDP
in that i was getting error something like name issue like i flashed JUI so my phone become c106 completly
in YGDP it was that c106 is the name n i was C1 & the proccess failed
so i tired soo many to recover EUI
but unfortunatly now i'm stuck on jui
and imei numbers corptted
can't connect to wifi
and in twrp recovery there is a error of "failed to mount /persist"
i had also tired to flash with qfil
it was also failed by saying something cannot divede by zero
please give a best solution
Hi , tell me what is your Original model number because I didn't understand clearly , in order to help you I need right informations .
Related
Hello friends,
I have a smartphone Bepa - G900W ( KOT49H.G9008SKSU1AND3 ). My GPS was not working so I wanted to re-record the phone's ROM.
I used the tool SP-Flash-Tool - v.5.1532.00 I created the Read Back ROM0 and over MTK Droid tools ( v.2.5.3 ) I wanted to automatically create a recovery file . When I recorded the phone to a new recovery error occurred BROM ERROR 5007 followed by telephone or light up.
It scared me a lot! So I downloaded a custom ROM ( http://www.needrom.com/download/bepa-g900w/ ). Use the SP - v.5.1408.00 FlashTool upgrade firemwaru went well and the phone running again. The problem is that the IMEI is unknown.
They would have these information to pull data out of ROM0 what did I do? Or should I try to reload ROM?
Thanks for any idea or post! Attention amateur and I apologize for my English .
You will have to send it back or try and flash a stock rom. This is a common issue with devices that use that sub par chip.
Hey guys i am tired of searching for solutions online (this is my first article)
so my canvas hd was stuck in bootloop i tried flashing it with sp flash but the brom error (5096) always stops the process .
I did a memory test and it says that nand flash was not detected . My phone is now formatted and it wont even boot I tried flashing 2 stock roms and a custom rom but the same brom error comes .
I have also tried flashing the files one at a time but only preloader
I dont have a backup of the phone . experts please help!!!!!!!!!
HI,
Did you solve your problem?
I have exactly the same problem with my phone.
An Brom Error 5069 appears after red and purple progress bar in Flashtool.
Any update on this...I m also getting same problem....
ok guys calm down ! I had this problem before. But step out in another way. But 1st let me know how u did things ....
not too long ago i bought lenovo vibe p1 from
http://www.tinydeal.com/lenovo-vibe...5-octa-core-android-51-4g-phone-p-159991.html
so i failed didint made backup,tryed to flash unsucessfully and didnt made system backup.
what goes now
i seems to made unlock boot,instal twrp 3.0 and its not dificult,got all drivers and etc. but what goes next .as telephone got no os,i downloaded several of p1a42 versions and tryed to instal thruoght twrp recovery
http://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650
none of those roms suited me,because as instalion begins mine smartphone tells :
failed to instal p1a42 rom because this model is idol 347.
i even delete some files in
http://forum.xda-developers.com/showthread.php?t=2522762
finally everything seemd to go well enought,thought mobile phone doesnt boot ,only restart.as well can go in twrp.
tryed loads of ways-to instal original recovery and put image througt instal update. udate.zip but it gets immediatly failed and nothing happens.tryed t instal throuht qst.but as much as telephone needs to restart.it goes to boot loop and nothing happens...tell me what exact information i need to give to go futher,thank you
as well i would try files with qsb format (sdfuse) but mine bootloader is gone. and i nowhere even find how to make it back. i mean i have recovery mode,but dont have bootloader.and as qsb should be launched fom some of bootloader options,i cant
you can edit it? I'm having the same issue
I'm also having the same problem!! Can anyone help?
I recently got this device and I did the same mistake. Just update twrp to latest one and you will be able to flash ROMs.
i just bought redmi note 4x from banggood...it was unlocked. i flashed developer rom without problems....however after few days the sensors ( acceleration ,magnetic) stop working ( verified by *#*#6484#*#*). searching a lot and i found the problem may be corrupted persist.img...... i tried to flash it by fast boot but failed , it gives me message :
FAILED (remote: Error: This image isn't allow download).
please how i flash persist.img....alternatively , can any one provide me with twrp backup of persist partition.?
pleeeeeeeeeeeeeeeeeeeeeeeeease urgent help.
please any one can provide me dump of persist partition (using dd command) ? my device is nearly dead , i cannot flash any system : (cannot mount persist partition invalid argument).
i got the same problem exactly.. mine is dead too.
miflash EDL mode flashing and flash/install/restore in TWRP are not working.. please give me your hand.
I have the same problem too did you guys solve it? I really need some help
anyone solve this problem ? thanks
I try flash miui 7.9.7 global beta via EDL mode. But still not working
Then i flash rom miui v8.1.10.0 via edl mode... Taraaa.....My mido bootloop duk on mi logo only.
Next i flash in edl mode use miui 7.9.7 again.
Done... All sensor working perfectly.
Maybe anyone try whats ive done.
Thanks
Sory my bad english
link post
hi guys, so i got a really big problem with my leeco. first i bricked my leeco by inputting the wrong code trying to unlock the bootloader, so i used the sp tool to try and flash the unbrick rom found in other threads....i did everything correctly, unticked the recovery and boot and the rest of the stuff but after the flashing process begins after 3mins ,it would stops and gives me and error and the colour of the flashing process below never changed to yellow still remained red till it gave out and error so i panicked and stupidly used the auto flash part of the sp flash tool , now anytime i try to flash the unbrick rom with the sp flash tool...it keeps giving me this error
''error status brom cmd send da fail 0xc0060003'' , yes i tried changing the Da_PL_High to Da_br also to Da_PL , It still keeps giving me the same error ''error status brom cmd send da fail 0xc0060003", is the phone completely dead? so i can take my mind off it:crying:
i have read all the leeco threads here tried it all, nothing works....pls any help will be of use, thanks in advance
bizzytheone said:
hi guys, so i got a really big problem with my leeco. first i bricked my leeco by inputting the wrong code trying to unlock the bootloader, so i used the sp tool to try and flash the unbrick rom found in other threads....i did everything correctly, unticked the recovery and boot and the rest of the stuff but after the flashing process begins after 3mins ,it would stops and gives me and error and the colour of the flashing process below never changed to yellow still remained red till it gave out and error so i panicked and stupidly used the auto flash part of the sp flash tool , now anytime i try to flash the unbrick rom with the sp flash tool...it keeps giving me this error
''error status brom cmd send da fail 0xc0060003'' , yes i tried changing the Da_PL_High to Da_br also to Da_PL , It still keeps giving me the same error ''error status brom cmd send da fail 0xc0060003", is the phone completely dead? so i can take my mind off it:crying:
i have read all the leeco threads here tried it all, nothing works....pls any help will be of use, thanks in advance
Click to expand...
Click to collapse