HELLO FREINDS I HAVE A PROBLEM IN MY PHONE THL T6C I HAVE BROKE MY SYSTEM BECAUSE I CHANGE BOOT ANIMATIONS
THEN I HAVE GO TO FLASH HIM WITH SP-FLASH TOOL AND HE GET ME A ERROR
I THINK THE ERROR ABOUT THE PRELOADER PLZ GUYS I NEED HELP I WANT TO GET PHONE BACK TO LIFE
:crying::crying::crying:
Were you able to get your device fixed?
I have a similar problem with my mom's THL T6C which stopped booting out of the blue. It will just get stuck on the THL logo.
I tried flashing with the SP Flashtool which always seems to error out when formating the EMMC.
I have tried flashing all 3 firmwares from the THL site for this device.
Any help would be appreciated.
Related
Hello,
A friend of mine recomended me this forum because it has alot of experts on the matter so, ill be fast.
I tried to instal cyanogen mod 11 for thl t100s by recovery mode, and after wipe/factory reset It's now looping: logo THL and then black screen.
I scew it up, and so i searched all over the internet for tuts, help, etc... and instaled SP flash tools, all drivers, verified everything and ok.
I tried to Flash it and after finishing "Downloading" i disconected, and it was the same cellphone again, looping again....
I would apreciate if some expert could help me resolve my issue.
Best regards
Hi,
My mobile was suddenly stuck at start up Lenovo screen so I flashed it with stock ROM S308 following the instructions at http://guidebelajar.blogspot.in/2015/07/how-to-flash-install-firmware-lenovo_16.html?m=1
All the process was okay with green tick being displayed at the end. But now the mobile won't start. The screen is not even flickering.
I also tried to load the other 3 stock firmware files but have been getting DRAM 4032 error for all of them. Please help!.. Appreciate your help!
same problem here!!
Help me if you've found any solution for this.
A319 dead after flash
Same problem after flashing mobile dead... have any solution...
Hi friends,
dear experts I am facing problem of boot loop
my phone is just showing brand logo and vibrating after few seconds after I installed fake device with xposed andmade changes I think in prop.build file through software mentioned above.
I have ROM back up made through ROM manaager and mtk toolkit and I restored , factory reset but all in vain and in mtk toolkit my device is not shown/reveled. I have installed drivers PDA , adb , phone official but all ended in smoke.oops
kindly tell me the sulotion of this problem. I be strong hope I will get the solution from you EXPERTS Guys!
Hey guys i am tired of searching for solutions online (this is my first article)
so my canvas hd was stuck in bootloop i tried flashing it with sp flash but the brom error (5096) always stops the process .
I did a memory test and it says that nand flash was not detected . My phone is now formatted and it wont even boot I tried flashing 2 stock roms and a custom rom but the same brom error comes .
I have also tried flashing the files one at a time but only preloader
I dont have a backup of the phone . experts please help!!!!!!!!!
HI,
Did you solve your problem?
I have exactly the same problem with my phone.
An Brom Error 5069 appears after red and purple progress bar in Flashtool.
Any update on this...I m also getting same problem....
ok guys calm down ! I had this problem before. But step out in another way. But 1st let me know how u did things ....
hi guys, so i got a really big problem with my leeco. first i bricked my leeco by inputting the wrong code trying to unlock the bootloader, so i used the sp tool to try and flash the unbrick rom found in other threads....i did everything correctly, unticked the recovery and boot and the rest of the stuff but after the flashing process begins after 3mins ,it would stops and gives me and error and the colour of the flashing process below never changed to yellow still remained red till it gave out and error so i panicked and stupidly used the auto flash part of the sp flash tool , now anytime i try to flash the unbrick rom with the sp flash tool...it keeps giving me this error
''error status brom cmd send da fail 0xc0060003'' , yes i tried changing the Da_PL_High to Da_br also to Da_PL , It still keeps giving me the same error ''error status brom cmd send da fail 0xc0060003", is the phone completely dead? so i can take my mind off it:crying:
i have read all the leeco threads here tried it all, nothing works....pls any help will be of use, thanks in advance
bizzytheone said:
hi guys, so i got a really big problem with my leeco. first i bricked my leeco by inputting the wrong code trying to unlock the bootloader, so i used the sp tool to try and flash the unbrick rom found in other threads....i did everything correctly, unticked the recovery and boot and the rest of the stuff but after the flashing process begins after 3mins ,it would stops and gives me and error and the colour of the flashing process below never changed to yellow still remained red till it gave out and error so i panicked and stupidly used the auto flash part of the sp flash tool , now anytime i try to flash the unbrick rom with the sp flash tool...it keeps giving me this error
''error status brom cmd send da fail 0xc0060003'' , yes i tried changing the Da_PL_High to Da_br also to Da_PL , It still keeps giving me the same error ''error status brom cmd send da fail 0xc0060003", is the phone completely dead? so i can take my mind off it:crying:
i have read all the leeco threads here tried it all, nothing works....pls any help will be of use, thanks in advance
Click to expand...
Click to collapse