Greeting all.
As said, I have bricked my one day old phone.
http://www.aliexpress.com/snapshot/230332055.html
I accidentaly flashed it with wrong rom (it was late and didn't read).
Now when i try to flash it, i get this message:https://www.dropbox.com/sc/5cdxl6cdemcbvra/MkG1w84hHd
If anyone has the solution or know how to help me, I would appreciate it.
I wanted to flash it because my sim card didnt catch any signal (thinking that flashing could resolve the problem).
Flashed with this rom (not correct):http://www.needrom.com/mobile/star-x920e-6/
Should flash with this one:http://www.needrom.com/mobile/star-x920e/
Thank everyone in advance.
Sloution found.
Big thanks to dorschdns from chinamobiles.org
This is the solution:
1. Please load this Rom first:
http://www.needrom.com/wp-content/up...ROOT_V0401.zip
2. Download now this ROM:
http://www.needrom.com/wp-content/uploads/2013/05/ML_20130423_STAR_X920_ROOT_LDv0404.zip
""" when you flash click on UBOOT and selected "LK_CD2.bin" and flashed """"""
you will flash only this image now!!!
Good luck!:good:
Repost Links.
jsain said:
Sloution found.
Big thanks to dorschdns from chinamobiles.org
This is the solution:
1. Please load this Rom first:
needrom /wp-content/up...ROOT_V0401.zip
Hi, can you re post the 1st link, its not complete. Thank you.
Click to expand...
Click to collapse
Hello, I have a bricked x920 but e2001v21_v89_zlh_hd version, I tried everything but cant find solution.
I'm trying to flash using windows 8 but, I tried this rom but I still got "enable DRAM failed" as in the 1st post.
Any solutions?
Hi guys,
After flashing different Recovery ROMs I've finally bricked Star (Tengda) x920 8Gb device by flashing ROM from this link needrom.com/mobile/star-x920e-6/
Now when connecting it to Windows 7 x64 SP1 computer it is recognized as "MT65xx Preloader" device and after a few seconds disconnects itself. It connects/disconnects seems like forever.
I have installed driver for this device, but behavior stays the same. I've tried Mini Windows XP (x86) SP3, behavior stays the same.
What could be possibly done to recover device?
Please be patient, noobie here
UPD: This was resolved via video posted on needrom.com/mobile/star-x920e-6/ page.
star x920 flashing
I have the x920, rooted , added autocwm recovery,
Found rom on needrom, download on SD
Reboot in recovery
Clean data/fasctory reset
Clean cache partition
Clean dalvik
Install zip
Opening but it stops and says aborted !
What am i doing wrong ?
does anyone have the oem room of the star x920Q?? i cant fine it anyware...
somebody had this rom??
Hi, I need ROM 101_v82_zlh_hd for my X920 is a MTK6582... My phone just stuck in the boot logo animation.. can somebody help me please.. :crying:
arngrim said:
Hi, I need ROM 101_v82_zlh_hd for my X920 is a MTK6582... My phone just stuck in the boot logo animation.. can somebody help me please.. :crying:
Click to expand...
Click to collapse
did you find a solution ?
arngrim said:
Hi, I need ROM 101_v82_zlh_hd for my X920 is a MTK6582... My phone just stuck in the boot logo animation.. can somebody help me please.. :crying:
Click to expand...
Click to collapse
Same problem here with the exact model. Any solutions? Thanks
Hi I really need some help unbricking my phone.
I have a doogee Mini F1 Turbo which was rooted. Today I did an OTA update (bad idea).
During the update the word ERROR appeared on the screen. When the phone rebooted it was stuck on the white boot logo screen.
I've downloaded the SP Flash tool and rom from the doogee website
When I try and re-flash I get the Message "Error initializing scatter file failed. Please check the name of scatter file you load is legal"
Hopefully some body can point me in the right direction and help me get my phone working again.
Thanks for your time,
Gavin
Hi Gavin,
I'd you get a solution to this? I'm facing the same issue.
Denclan
Soultion
Hi Denclan,
Sorry about the delay inb replying.
Yes I found a solution to my reflashing problem. What I had to do was move the contents of the ROM Download into to same folder as the Flashing program. This then worked.
I would be carefull with the R07 update.
After reflashing my phone I updated it before rooting. Then rooted it. Everything seemed fine but the battery drain was shocking so I've flashed it back to R05 and that works a treat.
Hope this helps you out.
Gavin
denclan said:
Hi Gavin,
I'd you get a solution to this? I'm facing the same issue.
Denclan
Click to expand...
Click to collapse
I had recently upgraded my Lenovo A6000 to the Lollypop upgrade. However the phone kept getting slower until yesterday when the screen kept flickering and the phone failed to restart. I have tried unbricking the phone by following the instructions given in the other thread by installing the firmware file (1.2GB) on the phone, but no joy. After that i tried the unbricking using the Lenovo Downloader V1.2 , the download was success. However on doing the CWM recovery the screen does not display anything but it only flickers a black background. In this stage if i touch the screen or menu buttons, the vibration response comes. The phone is also being detected by PC as Lenovo A6000 and i can access both Internal memory and SD card from my PC. However no joy with the black flickering display.
Please help urgently.
Plz reply
I had given this phone to a local mobile reapir center but after 10 days he came up with the reply that this may be an issue with the processor and he can not repair it. Please help
derian1234 said:
I had recently upgraded my Lenovo A6000 to the Lollypop upgrade. However the phone kept getting slower until yesterday when the screen kept flickering and the phone failed to restart. I have tried unbricking the phone by following the instructions given in the other thread by installing the firmware file (1.2GB) on the phone, but no joy. After that i tried the unbricking using the Lenovo Downloader V1.2 , the download was success. However on doing the CWM recovery the screen does not display anything but it only flickers a black background. In this stage if i touch the screen or menu buttons, the vibration response comes. The phone is also being detected by PC as Lenovo A6000 and i can access both Internal memory and SD card from my PC. However no joy with the black flickering display.
Please help urgently.
Click to expand...
Click to collapse
If ur mob has warranty simply give it to them or maybe ur display is gone I think
Hey guys i am tired of searching for solutions online (this is my first article)
so my canvas hd was stuck in bootloop i tried flashing it with sp flash but the brom error (5096) always stops the process .
I did a memory test and it says that nand flash was not detected . My phone is now formatted and it wont even boot I tried flashing 2 stock roms and a custom rom but the same brom error comes .
I have also tried flashing the files one at a time but only preloader
I dont have a backup of the phone . experts please help!!!!!!!!!
HI,
Did you solve your problem?
I have exactly the same problem with my phone.
An Brom Error 5069 appears after red and purple progress bar in Flashtool.
Any update on this...I m also getting same problem....
ok guys calm down ! I had this problem before. But step out in another way. But 1st let me know how u did things ....
HELLO FREINDS I HAVE A PROBLEM IN MY PHONE THL T6C I HAVE BROKE MY SYSTEM BECAUSE I CHANGE BOOT ANIMATIONS
THEN I HAVE GO TO FLASH HIM WITH SP-FLASH TOOL AND HE GET ME A ERROR
I THINK THE ERROR ABOUT THE PRELOADER PLZ GUYS I NEED HELP I WANT TO GET PHONE BACK TO LIFE
:crying::crying::crying:
Were you able to get your device fixed?
I have a similar problem with my mom's THL T6C which stopped booting out of the blue. It will just get stuck on the THL logo.
I tried flashing with the SP Flashtool which always seems to error out when formating the EMMC.
I have tried flashing all 3 firmwares from the THL site for this device.
Any help would be appreciated.