Hello guys,
this is my first post here!
I recently got Idol 2 from my brother to use and seeing as it says on GSM arena that it has KitKat I wanted to flash it to get rid of slow 4.2.2.
I used SP flashtool and on youtube I found how and also the ROM. I flashed it, first I used format all except bootloader and after flashing it wont switch on.
PC can see it and I tried every guide, I have 6 roms, many of them russian and every time I try flashing I get
brom error sft enable dram failed 4032. I somehow solved that but not I get brom error s_ft_enable_dram_fail (0xfc0) every time I try flashing.
I have a boat load of drives, I used USBDEVIEW to uninstall them and I have reinstalled them 47 times, always same error. Flashing wont start.
What am I doing wrong? IS there anyone who knows? :crying:
I really wanna fix it because I dont have a phone anymore..... I had to sell my OnePlus 3 cause of money issues and cannot afford a new one.....
Thanks in advance!
Related
Hello every one,well i flashed my LG KS20 so many times before,every thing worked just fine,two days ago i hard reseted the phone because it was somehow late after installing few applications,well i hard reset it each time i feel like it was slow(so that won't be for sure the first time). The problem is,when i tried to flash it today,it stops within 15 seconds and it says( error nand write!) when it was writing the assm or something like this,i tried all rom that i have but still the same problem,i don't really know what to do,when i turn on the phone,it bugs on the lg logo screen.
i searched,really searched a lot,but whether i'm a real newbie and i cannot find the solution,or no one passed by this problem before.
what should i do???
Please help me,pleaase!
Hey guys,i finally flashed it(well for now with an old rom,but i'll immediatly flash it with the WM6.5 build),the problem was the usb driver,i tried so many times to reinstall it on my laptop,and each new time it began flashing,and it stop suddenly after 4minutes,and that's exactly when an error message appears telling me that the windows couldn't install the driver device(i'm on Windows 7)
So i switched to my Desktop(with an xp pack 2),i installed the driver,and it worked propely ,cooooooooool
(Sorry for new post, a guys ask me to write my ask here)
Hello guys, this is two days I'm looking for how to fix the problem but it's two days that I can not.
There are two days I tried to install firmware on my Jiayu 3s while operating, SP Flash Tool said the root had gone well since that day, impossible to turn on my phone, does not start, but does not load is detected as the "Alcatel DNIS # ** Interface" on my computer, I tried several methods; reinstall the drivers, try to reflash ect .. but nothing happens. I know this method before, I had a Chinese firmware (MOLY.lr9.w1423.md.lwtg.cmcc.mp.v9) , everything had gone well, stages ect ..
But when I tried to flash firmware with Europeans, it was bricked the phone and from that day, I can not do anything.
(Sorry for the bad English but I use Google Translate)
Can you help me solve the problem? I you will be very grateful if someone could help me.
My phone has a non-removable battery.
Regards,
Lackted
I need help please...
I need my phone
Hey guys i am tired of searching for solutions online (this is my first article)
so my canvas hd was stuck in bootloop i tried flashing it with sp flash but the brom error (5096) always stops the process .
I did a memory test and it says that nand flash was not detected . My phone is now formatted and it wont even boot I tried flashing 2 stock roms and a custom rom but the same brom error comes .
I have also tried flashing the files one at a time but only preloader
I dont have a backup of the phone . experts please help!!!!!!!!!
HI,
Did you solve your problem?
I have exactly the same problem with my phone.
An Brom Error 5069 appears after red and purple progress bar in Flashtool.
Any update on this...I m also getting same problem....
ok guys calm down ! I had this problem before. But step out in another way. But 1st let me know how u did things ....
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
flagpol said:
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
Click to expand...
Click to collapse
Do you find the solution yet? Cause I face the same problem too..
Tzul please help.. :crying:
me too, please help
similar issue, cant power on, keep on vibrate loop interval, no display, not detected by pc
flagpol said:
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
Click to expand...
Click to collapse
Hi, did you find anything?
I have three TB3-710l (they are the company I work for), I have successfully root 2 of them but the newest tablet doesn't have the same luck.
First I install TWRP by Tzul, but the TWRP have an error never mount anything.
Second I try to flash stock firmware (Lenovo_Tab_3_TB3-710I_MT6580_S000032_160921) then the same happened, never turn on and just vibrates.
Always using SPFT, and now I have the same problem has you: always shows that it cannot load DRAM (4032 error or 0xFC0 error).
EDIT: Hi, for everyone who get in here with this problem, please read all this thread.
I unbrick my tablet with this answer in specific.
Good Luck!
asdrubalsantander said:
Hi, did you find anything?
I have three TB3-710l (they are the company I work for), I have successfully root 2 of them but the newest tablet doesn't have the same luck.
First I install TWRP by Tzul, but the TWRP have an error never mount anything.
Second I try to flash stock firmware (Lenovo_Tab_3_TB3-710I_MT6580_S000032_160921) then the same happened, never turn on and just vibrates.
Always using SPFT, and now I have the same problem has you: always shows that it cannot load DRAM (4032 error or 0xFC0 error).
EDIT: Hi, for everyone who get in here with this problem, please read all this thread.
I unbrick my tablet with this answer in specific.
Good Luck!
Click to expand...
Click to collapse
THis might WOrk i ve havent tried yet ,tho i wanna flash it now
https://forum.xda-developers.com/android/development/tb3-710i-tb3-710f-rom-stock-rom-lenovo-t3437810
same problem faced,can any developer please help us
hi guys, so i got a really big problem with my leeco. first i bricked my leeco by inputting the wrong code trying to unlock the bootloader, so i used the sp tool to try and flash the unbrick rom found in other threads....i did everything correctly, unticked the recovery and boot and the rest of the stuff but after the flashing process begins after 3mins ,it would stops and gives me and error and the colour of the flashing process below never changed to yellow still remained red till it gave out and error so i panicked and stupidly used the auto flash part of the sp flash tool , now anytime i try to flash the unbrick rom with the sp flash tool...it keeps giving me this error
''error status brom cmd send da fail 0xc0060003'' , yes i tried changing the Da_PL_High to Da_br also to Da_PL , It still keeps giving me the same error ''error status brom cmd send da fail 0xc0060003", is the phone completely dead? so i can take my mind off it:crying:
i have read all the leeco threads here tried it all, nothing works....pls any help will be of use, thanks in advance
bizzytheone said:
hi guys, so i got a really big problem with my leeco. first i bricked my leeco by inputting the wrong code trying to unlock the bootloader, so i used the sp tool to try and flash the unbrick rom found in other threads....i did everything correctly, unticked the recovery and boot and the rest of the stuff but after the flashing process begins after 3mins ,it would stops and gives me and error and the colour of the flashing process below never changed to yellow still remained red till it gave out and error so i panicked and stupidly used the auto flash part of the sp flash tool , now anytime i try to flash the unbrick rom with the sp flash tool...it keeps giving me this error
''error status brom cmd send da fail 0xc0060003'' , yes i tried changing the Da_PL_High to Da_br also to Da_PL , It still keeps giving me the same error ''error status brom cmd send da fail 0xc0060003", is the phone completely dead? so i can take my mind off it:crying:
i have read all the leeco threads here tried it all, nothing works....pls any help will be of use, thanks in advance
Click to expand...
Click to collapse