i flash UPDATEMODE_R350OXA0BOA2_R350XXU0BOA2.tar
but after that my gear fit show this screen
how to unbrick
--------------------------------------
i try many solution
but work
use USB JIG
case close...
Related
phone stuck at phone exclamation mark and computer sign underneath it says software update failed not able to get into download mode also i have bought a usb jig which is also not working
i dont know what to do please help
thanks
212nyc said:
phone stuck at phone exclamation mark and computer sign underneath it says software update failed not able to get into download mode also i have bought a usb jig which is also not working
i dont know what to do please help
thanks
Click to expand...
Click to collapse
Read the rules questions = Q&A
You give zero details of firmware or method of upgrading or what you upgrade to and have almost certainly failed to search .
Details please so we can guess whats wrong .
USB jig does not work on new bootloaders you been ICS flashing ???
jje
thanks for the reply this is not my phone i am just helping someone but i see this weird thing every time i open odin even though its not in a download mode its get connected to odin for a couple seconds and then get disconnected
i think its trying to install the drivers
but not able to
is there nything i can do or i just ran out of option
what happened was he was try put austrailian firmaware 2.3.6 and odin flash it and while it was flashing his computer turned off and now it stuck on that logo
Your phones not bricked. The jig should work. Try installing Kies. It will install the drivers needed for the phone
thanks for the reply i had usb jig plugged in for a while no luck i have just reinstalled the kies
i have attached a screenshot of the logo thats just keep blinking
now
http://www.lmgtfy.com/?q=fix+bricked+i9100g+xda
Ya but I can't get into the download mode neither with three buttons or USB jig I don't know how I am gone flash the file
212nyc said:
Ya but I can't get into the download mode neither with three buttons or USB jig I don't know how I am gone flash the file
Click to expand...
Click to collapse
try this one! may be it will help! http://forum.xda-developers.com/showthread.php?t=1448765
I was running cm12 on my s2 using twrp and decided to flash cm13. However, after I factory reset (from default Settings app) I was stuck on the TeamWin boot screen. The usb port is broken, and will very occasionally work if I bend the plug backwards (I charge the battery through a different s2 that has power button issues), so I can’t use odin and flash a recovery through download mode. I have read that jig plugs can be used to fix bricked phones. Is this true a phone with a broken mini-usb port? Or should I try replacing the usb port on the phone?
Replacing the usb port is your only real option. Here is a guide I wrote that will help you do just that......
http://forum.xda-developers.com/showthread.php?t=2335961
Have you thought of combining the good parts of both phones to make one fully functional unit?
If you decide to do that, just make sure the rev number on the usb flex cables match each other (more info on that in the guide)........
http://i.imgur.com/rVnFwJM.jpg
As the title says i bricked my phone, whenever i try to access fastboot or recovery mode the mi logo lights up and for a split second i can see a blue screen then it boots into cyanongenmod which stays there. I cant figure a way out of this. I cant enter EDL without fastboot as far as I know if someone knows a way to do this please notify me
vznxc said:
As the title says i bricked my phone, whenever i try to access fastboot or recovery mode the mi logo lights up and for a split second i can see a blue screen then it boots into cyanongenmod which stays there. I cant figure a way out of this. I cant enter EDL without fastboot as far as I know if someone knows a way to do this please notify me
Click to expand...
Click to collapse
You need to make a deep flash cable to get into edl mode.......you can make it by yourself it is very easy..
just pick any micro usb cable(data cable) peel of the cable with a sharp blade...you will find 4 wires inside it Red,white,green and black....just shock the green and black wire and switch off your phone and connect the modified cable to the phone and your pc to get into the edl mode and flash latest firmware with the help of miui flashtools.....good luck...
What's shock here?
Biswajyoti said:
You need to make a deep flash cable to get into edl mode.......you can make it by yourself it is very easy..
just pick any micro usb cable(data cable) peel of the cable with a sharp blade...you will find 4 wires inside it Red,white,green and black....just shock the green and black wire and switch off your phone and connect the modified cable to the phone and your pc to get into the edl mode and flash latest firmware with the help of miui flashtools.....good luck...
Click to expand...
Click to collapse
Bro what do you mean by just shock the green and black wire??pls reply!
Biswajyoti said:
You need to make a deep flash cable to get into edl mode.......you can make it by yourself it is very easy..
just pick any micro usb cable(data cable) peel of the cable with a sharp blade...you will find 4 wires inside it Red,white,green and black....just shock the green and black wire and switch off your phone and connect the modified cable to the phone and your pc to get into the edl mode and flash latest firmware with the help of miui flashtools.....good luck...
Click to expand...
Click to collapse
Turns out that i was just dumb. I could access fastboot mode and i unbricked it via it :good:
HELLO I was trying to unlock my bootloader by flashing a zip file with mi flash in EDL MODE the result was the device is now bricked it only flashes red led no power on no recognition by computer bootloader locked no fastboot no adb
people suggested something called a deep flash cable to connect straight to the CPU Qualcomm port 9008 now the computer recognize the phone but when I try to flash a ROM it gives cannot receive hello packet error
is there any hope left?:crying:
redmi note 3 pro snapdragon
Only Service center ATM.
aliamiri70007 said:
HELLO I was trying to unlock my bootloader by flashing a zip file with mi flash in EDL MODE the result was the device is now bricked it only flashes red led no power on no recognition by computer bootloader locked no fastboot no adb
people suggested something called a deep flash cable to connect straight to the CPU Qualcomm port 9008 now the computer recognize the phone but when I try to flash a ROM it gives cannot receive hello packet error
is there any hope left?:crying:
redmi note 3 pro snapdragon
Click to expand...
Click to collapse
deep flash cable problem.it should show Qualcomm qdloader 9008 or something.
use testpoint method. i did it once by my self with just a screwdriver and forceps
I connect the phone to PC it shows up as Qualcomm 9008
And flash tool shows as com20 but there is no flash button
We're is the flash button?
aliamiri70007 said:
HELLO I was trying to unlock my bootloader by flashing a zip file with mi flash in EDL MODE the result was the device is now bricked it only flashes red led no power on no recognition by computer bootloader locked no fastboot no adb
people suggested something called a deep flash cable to connect straight to the CPU Qualcomm port 9008 now the computer recognize the phone but when I try to flash a ROM it gives cannot receive hello packet error
is there any hope left?:crying:
redmi note 3 pro snapdragon
Click to expand...
Click to collapse
if deep flash mated ( with deep flash cable) not work for you:
open your phone and disconnect your battery and flash your phone
Please help there is no flash button on flash tool even though the computer says the phone is connected Qualcomm 9008
If red notification light flashes, then you are already in EDL mode, and deep flash cable is nothing but the usb cable which has circuit breaker(switch) between green and white cable... jus buy a cheap data cable from market and peel it partially... now peel the green and white wire... ur deep flash cable is ready.. now insert the cable in pc and phone.. and join the green wire and white wire for 8 seconds... you are in EDL mode.
Hey bro i had faced the same issue that u are on. I had lost hope, but there is solution. There is a video on YouTube -
. This you can watch.
Now the procedure is very simple.
1. Remove the backpanel of your phone( don't worry nothing that serious)but do it carefully as the fingerprint wire is connected already so u should not tear it. Remove the fingerprint cable. Then remove the battery's frap type cable and reinsert it and reinsert the fingerpint one and close the panel. Similar to removing the battery and inserting it again.
2. According to that video, take the copper wire and insert it on the middle pins, very very carefully and insert it in the usb port of your computer. Mind it it might not work at the very first try, due to not applying the wire correctly but for sure it works, so take a small wire and not a bunch of wires and connect it with the port connected to your phone.
3. After inserting let your computer detect it and then remove the Usb cable. Remove the wire. And insert the cable again without wire. Now the port is unlocked and you can easily flash stock os through Mi flash application on pc.
It is super simple and don't panic. Hope you get your phone recovered???.
Don't work it can be fixed,dm me if you haven't already
Hi
Actually, I have a redemi note 4x device. last week unfortunately I flashed a wrong Rom on my phone and it became brick
I can not turn it on and it does not go to recovery mode or fastboot mode or anything
I understood that I need to flash the Rom with deep flash cable
I ordered deep flash cable and followed instructions but my laptop does not recognize Qualcomm driver
I press the bottom on the cable and then connect the phone but it does not recognize it
it is really annoying that I can not do anything for it
I have heard redemi note 4x does not go to EDL mode with this cable is that true?
Has anyone any solution?
Ps: I opened the back of the of the phone even tried to use 2 points to jumper but it did not work really so I ordered the cable but it seems the cable is also not working
I appreciate if anyone knows a way regarding this problem
Thanks and Regards
flash firmware then rom