[Q] GT-i9300 - Galaxy S III Q&A, Help & Troubleshooting

hello guys. brother gave me a phone Samsung Galaxy S3, because bought a new one, but when the sparks out display with visas, does not enter the recovery mode, only in download mode,and when the set in charging LED does not light up, and I tried to installed a firmware from download mode with Odin finds the phone but when I press start installation starts not only looks FAIL .. please help me

Try the rescue firmware in general forum, otherwise it's a brick.

boomboomer said:
Try the rescue firmware in general forum, otherwise it's a brick.
Click to expand...
Click to collapse
INGLESE
I did not understand, I just was looking for help to fix it, because as written before I tried every way but does not work

SalvatoreXeka said:
INGLESE
I did not understand, I just was looking for help to fix it, because as written before I tried every way but does not work
Click to expand...
Click to collapse
boomboomer suggested the rescue firmware (it's not the "normal" one). Did you check this one? http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
Good luck!

thank you very much for your answer, I'm trying to download but does not work does not begin the unloading, sorry for my bad English

Related

[Q] Android isn't booting up

I think I bricked my Android, I installed messed with ROM manager, then I shut down my phone, tried to reboot it and it didn't boot, also I cant see download mode or rescovery, though Odin detects my phone and I plug the USB to the phone. I think the only solution is go to the service... please help me..
eulfen said:
I think I bricked my Android, I installed messed with ROM manager, then I shut down my phone, tried to reboot it and it didn't boot, also I cant see download mode or rescovery, though Odin detects my phone and I plug the USB to the phone. I think the only solution is go to the service... please help me..
Click to expand...
Click to collapse
If Odin can detect your phone then you should be able to flash your phone with it regardless what the screen looks like.
Can you help me how to do it? I have Samsung Galaxy Gio S-5660 GT
If you will turn my phone on, I promise to pay you.
eulfen said:
Can you help me how to do it? I have Samsung Galaxy Gio S-5660 GT
If you will turn my phone on, I promise to pay you.
Click to expand...
Click to collapse
Well you said Odin detects your phone still right? You should be able to find Odin flashable firmware for your phone and flash as usual.
Sent from my SAMSUNG-SGH-I897 using XDA App
If Odin detects your phone then there might be a chance to flash a new rom to your device.
Go to samfirmware.com and find an rom/firmware for your phone... Then download it and flash it using one package techinque in odin. If you need more help post your phone model, it might help for better reply ...
yagya said:
If Odin detects your phone then there might be a chance to flash a new rom to your device.
Go to samfirmware.com and find an rom/firmware for your phone... Then download it and flash it using one package techinque in odin. If you need more help post your phone model, it might help for better reply ...
Click to expand...
Click to collapse
He did mention his phone model. Hasn't posted in 2 days so I'm hoping he fixed it.
eulfen said:
Can you help me how to do it? I have Samsung Galaxy Gio S-5660 GT
If you will turn my phone on, I promise to pay you.
Click to expand...
Click to collapse
remove battery , hold 3buttons and replace it!
u will see downloadin...
I opened Odin, loaded 1.0 GIO
then put the package of firmware, pressed start and it said.. downloding and then error popped up something with timer
I have 5660 GIO GT
Plz plz plz help
Not sure if it'll make much difference, but you could try Heimdall.
Sent from my SAMSUNG-SGH-I897 using XDA App
eulfen said:
I opened Odin, loaded 1.0 GIO
then put the package of firmware, pressed start and it said.. downloding and then error popped up something with timer
I have 5660 GIO GT
Plz plz plz help
Click to expand...
Click to collapse
Go to this link and get yourself a good rom/kenel that is for your region's device. Then try to flash it using one package option in ODIN in download mode.
You can also find a guide on flashing your rom @ samfirmware.com/guides.htm

Please help! Bricked GT - I9108

So I was helping my friend with her China Galaxy S2 GT - I9108 and I foolishly tried to flash "GT-I9100_ClockworkMod-Recovery_5.0.2.3.tar" onto her phone through odin...
Now it's stuck at the yellow triangle everytime when I boot up. I've bricked her 500$ phone...
Please tell me anyone, how do I make it work again?
There are chinese methods apparently but I am not chinese.... I just wish someone could provide reasonably well written instructions and DL links so I can fix her phone! Please!
Since it is apparently a Chinese only model phone, I think you'd be hard pressed to find any English websites that can help you... Maybe some Chinese sites, with Google Translate? Not perfect, but it's something.
Try to find stock firmware and flash it via odin. Google translate can help you for chinese sites.
Sent from my GT-I9100 using XDA
Also, if this isn't obvious now... Don't flash any more i9100 kernels or firmwares. Only flash i9108 kernels or firmwares.
Stock?
I can't seem to find it anywhere! My brain aches from looking for the stock >< Please help? ): What would I need to do IF I found it?
Since I flashed a GT - I9100 tar file can someone link me to a tar file that is compatible with the GT - I9108?
http://forum.xda-developers.com/showthread.php?t=1457458
Will this guide work?
hadrice said:
I can't seem to find it anywhere! My brain aches from looking for the stock >< Please help? ): What would I need to do IF I found it?
Since I flashed a GT - I9000 tar file can someone link me to a tar file that is compatible with the GT - I9108?
Click to expand...
Click to collapse
You meant I9100, above, right?
hadrice said:
http://forum.xda-developers.com/showthread.php?t=1457458
Will this guide work?
Click to expand...
Click to collapse
Possibly, but don't use any of the firmwares linked within, as they are all for i9100 model phones.
Go to samfirmware.com to find stock i9108 firmwares. Download one from there, (you'll have to register but it's free) and flash using that guide. Again, don't use any files linked from the guide as they are not meant for your phone. But the steps should be the same.
EDIT: actually, don't use that guide. Just download an i9108 firmware from samfirmware.com, flash it in Odin in the PDA field, then do a factory reset. Then you should be good.
Yes Sorry, I fixed it haha
GT - i9100 haha
And okay I'll try that right now!
ctomgee said:
You meant I9100, above, right?
Possibly, but don't use any of the firmwares linked within, as they are all for i9100 model phones.
Go to samfirmware.com to find stock i9108 firmwares. Download one from there, (you'll have to register but it's free) and flash using that guide. Again, don't use any files linked from the guide as they are not meant for your phone. But the steps should be the same.
EDIT: actually, don't use that guide. Just download an i9108 firmware from samfirmware.com, flash it in Odin in the PDA field, then do a factory reset. Then you should be good.
Click to expand...
Click to collapse
Enter *#1234# to get the PDA and ???? to get your product code
I can't enter that on my phone since its bricked? What should I do? Also It comes up as blank... I mean no firmwares are listed when I click the link
hadrice said:
Enter *#1234# to get the PDA and ???? to get your product code
I can't enter that on my phone since its bricked? What should I do? Also It comes up as blank... I mean no firmwares are listed when I click the link
Click to expand...
Click to collapse
Don't worry about product code. You know you have an I9108.
The site is a tad confusing. You have to click the Firmwares tab, then click Type: Smartphone, then OS: Android, then Models: GT-I9108, then Region: Asia. That will get you a list of stock firmwares for the i9108.
Edit to add: Also, ignore the box at the bottom that says "LATEST FIRMWARES". If you notice, the models are all for a different model of phone; not the GT-I9108. The PDA for the I9108 should always start with "I9108".
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9108&r=-1#modelsa
I'm there! However theres none under the list O_O is it just my browser not loading the list? It wont show haha
Edit: NVM I forgot to click "asia"
edit 2: You reached your hourly traffic limit.
You can wait download for 13 minutes or upgrade to premium
Oh my goodness hotfile... ugh.
FYI, this may or may not be of interest to you.
I found this page using google that suggests that the i9108 uses the same SoC/chipset that the i9100G uses. Which is why you had issues when you used an i9100 kernel to try to root.
EDIT: well, you never explicitly said you were rooting, but you were flashing a kernel that had CWM Recovery in it, so I assumed you were rooting.
My phone won't enter download mode with
Volume Down home and power! What do I do?
Last thing I did was flash "I9100ZSKG2-kernel-PDA.tar" pda.....
hadrice said:
My phone won't enter download mode with
Volume Down home and power! What do I do?
Last thing I did was flash "I9100ZSKG2-kernel-PDA.tar" pda.....
Click to expand...
Click to collapse
Was that before or after I told you to go to samfirmware.com?
And when you're trying download mode, you're doing it with the phone powered off, right? Then holding Vol Down + home, then pressing power till the screen lights?
Edit: PLEASE tell me you did not flash yet another I9100 kernel, even after I told you not to.
ctomgee said:
Was that before or after I told you to go to samfirmware.com?
And when you're trying download mode, you're doing it with the phone powered off, right? Then holding Vol Down + home, then pressing power till the screen lights?
Click to expand...
Click to collapse
Before ): Yup I am...
Strangely the phone only turns on when I plug it into the USB cable
Apparently the power button is working fine when USB connected.... and it keeps restarting when USB is connected too!
Edit: Restarting seems to be just when plugged into computer... so i guess its driver stuff.
On wall charger its just stuck on the boot screen
hadrice said:
Before ): Yup I am...
Strangely the phone only turns on when I plug it into the USB cable
Apparently the power button is working fine when USB connected.... and it keeps restarting when USB is connected too!
Click to expand...
Click to collapse
Well, during one of the boot cycles while the plug is in, try holding vol down and home. Maybe you'll get lucky. OR take out batt, hold vol down and home, (keep holding) then put battery back, and THEN press power till screen lights.
If that doesn't work, you may need to try obtaining a USB jig. You can order them on eBay or construct your own. There are instructions all over google on how to do it, but they cost like $2-3, so I just bought one.
So since it still powers on and home button works the USB jig should work right?
And flashing to stock firmware using PDA option on Odin should in theory work right?
Can you reccomend a link for a good jig? Don't wanna buy a bad one.
hadrice said:
So since it still powers on and home button works the USB jig should work right?
And flashing to stock firmware using PDA option on Odin should in theory work right?
Click to expand...
Click to collapse
Probably, and yes.
hadrice said:
Can you reccomend a link for a good jig? Don't wanna buy a bad one.
Click to expand...
Click to collapse
I just got one off a reputable eBay seller, and it worked. Maybe I got lucky.
I suggest you a Chinese forum here:http://bbs.gfan.com/forum-712-1.html
The posts there are ALL about GT-9108. Good luck!
Why did you revive several months old thread?
Sent from my Galaxy S2 GT i9100
how u fixed it
how u fixed it??? can teach me thnx!!!

please help me ?

please guys i really need some help.
i tried to update my phone but i had put on a bad firmware (i9100 instead of i9100g)
now it doesnt do anything exept when i connect it to a usb it will turn on and put the "samsung galaxy s2 GT-i9100g" with a yellow triangle.
i cant put it in download mode can someone please help me ?
enniocharchar said:
please guys i really need some help.
i tried to update my phone but i had put on a bad firmware (i9100 instead of i9100g)
now it doesnt do anything exept when i connect it to a usb it will turn on and put the "samsung galaxy s2 GT-i9100g" with a yellow triangle.
i cant put it in download mode can someone please help me ?
Click to expand...
Click to collapse
You have been asking many common questions asked. And you managed to install the wrong firmware? The thing you can do is to use a USB jig. If it doesn't work then many Jtag or samsung.
You really need to stop creating multiple threads. It's not your first time.
Your other thread (http://forum.xda-developers.com/showthread.php?p=33426283) for this issue even already has the answer you are looking for, and you even thanked the guy who linked you to the answer you were looking for. What's your issue now?
yes i know but this is another problem ... i cant seem to put it in download mode and i have search a lot of threads but none seems to be helping me
Use a USB jig. If it doesn't work, Jtag or Samsung. This question has been asked multiple times.
i know it has been asked but non of them are working with me are there any other way please i nedd some help, i have the firmware odin... but the only problem is that i cant put it in download mode
enniocharchar said:
i know it has been asked but non of them are working with me are there any other way please i nedd some help, i have the firmware odin... but the only problem is that i cant put it in download mode
Click to expand...
Click to collapse
If you can't put it in download mode there is no other way. Unless you can go to CWM.
Sent from my GT-I9100 using xda app-developers app
ctomgee said:
You really need to stop creating multiple threads. It's not your first time.
Click to expand...
Click to collapse
.........and it wont be the last.
Clear cut case of needing spoon-fed all the way..........lol.

I Soft Bricked My Phone

I'm not sure my s3 bricked or not, yesterday i try to flash a new firmware MC3. But it was fail after, i was trying to flash older firmwares but it didn't work either. I can't turn on s3, it's also said "Please connect with KIES for recovery", i plugged it to computer but it doesn't seem connect with my computer. Please help, thanks so much.
hoangtung619 said:
I'm not sure my s3 bricked or not, yesterday i try to flash a new firmware MC3. But it was fail after, i was trying to flash older firmwares but it didn't work either. I can't turn on s3, it's also said "Please connect with KIES for recovery", i plugged it to computer but it doesn't seem connect with my computer. Please help, thanks so much.
Click to expand...
Click to collapse
Make sure you put your phone in download mode, and also Samsung USB Drivers installed on your PC. Try other USB cable if it did'nt work. Redownload the firmware, maybe it is a corrupted file
If you can boot into recovery then format data and cache, that might make the phone bootable again. If that doesn't help then boot into download mode as above and flash the correct stock rom via odin.
If it won't boot into download then you have a hard brick, service centre repair required.
fanbogo said:
Does anyone know how to run triangle away on SGS 3 without downloading additional data? The point is that I bricked my device, somehow lost IMEI and put phone into factory mode, wifi doesn't work, the same goes for mobile networking. I'd like to give it back to where I bought it from but in Odin mode you can see that the custom binary download is yes (10 counts). In other words I'd appreciate it if you told me what to do to return the device and get it fixed or replaced. Thank you.
Click to expand...
Click to collapse
Have you tried without downloading or used some other wifi .
Please stop hijacking other threads all the time .
jje
JJEgan said:
Have you tried without downloading or used some other wifi .
Please stop hijacking other threads all the time .
jje
Click to expand...
Click to collapse
sorry mate, I'm desperate. It can't be done without mobile networking or wi-fi because it claims it needs some additional data.
fanbogo said:
sorry mate, I'm desperate. It can't be done without mobile networking or wi-fi because it claims it needs some additional data.
Click to expand...
Click to collapse
Do not spam the forums, I have deleted your posts. Did it ever cross your mind that the best way to get an answer would be to create your own thread in the Q&A forum and give as much detail in there as you can? If it didn't cross your mind then I would suggest doing it.

Samsung Admire 4G (SCH-R820)

I tried to root device but now the phone it's not booting... Any help will be appreciated. I think it's soft bricked....it's charging and i can enter Download mode.....but nothing else.....in recovery mode it's dead (black screen).
gordonisrock said:
I tried to root device but now the phone it's not booting... Any help will be appreciated. I think it's soft bricked....it's charging and i can enter Download mode.....but nothing else.....in recovery mode it's dead (black screen).
Click to expand...
Click to collapse
I'd say get the original firmware directly from the Samsung website for this device and you should be able to flash it somehow via download mode. I could be wrong I've never been without recovery. Sorry I can't be of more help.
emmanuel_baez said:
I'd say get the original firmware directly from the Samsung website for this device and you should be able to flash it somehow via download mode. I could be wrong I've never been without recovery. Sorry I can't be of more help.
Click to expand...
Click to collapse
Thanks.I'm looking for the firmware but i can't find it. I Think i will go to a Samsung store to ask.
gordonisrock said:
Thanks.I'm looking for the firmware but i can't find it. I Think i will go to a Samsung store to ask.
Click to expand...
Click to collapse
Not a problem. Best of luck to you

Categories

Resources