Will someone PLEASE explain to me how i get Vodaphone GPRS to work on WM6.5?
When i insert the Sim it detects it as a BPL sim and it fails to automatically get the settings,i've tried connection manager AND IT JUST CRASHES upon launch
If i have to input the settings manully will someone please direct me in a gprs-for-dummies kinda way?
Solution
Hi bro here's the setting
Frist goto
Setting than connection and tap on connection
Then u will find advanced option below tab it
Then select new
Give name as vodafone
Then tap on modem and create new
Name it vodafone then select cellular line (gprs) than next
Then give access point name as
portalnmms
Then next and finish leave user name and password blank
Now select proxy setting below
Check on both the box
Give proxy server as
10.10.1.100
Now select advanced
Than select http
Edit server as above and port as
9401
Also configure for wap;secure wap and socks as the above way
Then tab ok and you are done
Just ran across this on another forum... anybody tried this, I don't have time right now, might look at it later, the menu comes up but I didn't have time to get any further than that.
Wifi Hotspot Hack 4 No Root And Infrastructure Tether 4 Root Updated 7/17 Incredible2
WiFi Hotspot Hack
Steps:
1) Dial ##778#, SEND.
2) EPST dialog comes up. Select 'Edit Mode'. Enter SPC (000000), hit OK.
3) Scroll to down to 'Security', select it. Change 'S.IP DUN User name just take out dun. Of the email address.
4) Hit back arrow to go back and go/select 'M.IP Default Profile' just take out dun. Of the email address.
5) Hit menu button, and 'Commit Modifications', phone will save changes and reboot.
If Your Rooted And No Longer Needing Hack.
(Cygenmod Doesnt Work With This Your Must Do This Before)
Steps:
1) Dial ##778#, SEND.
2) EPST dialog comes up. Select 'Edit Mode'. Enter SPC (000000), hit OK.
3) Scroll to down to 'Security', select it. Change 'S.IP DUN put dun. back in front of vzw.
4) Hit back arrow to go back and go/select 'M.IP Default Profile' change only the DUN NAI back to .
5) Hit menu button, and 'Commit Modifications', phone will save changes and reboot.
Hey guy/gals, I've got a nifty little trick here for you. Now, the trick I'm about to explain is a rather low-level trick that most of you may know, but its for those who don't or are new. So, at the school i attend, they have wifi throughout the school. They make the password something simple like "internet", and then wait for someone to figure it out and tell everyone. Once everyone start joining the network and using it, they just go through and blacklist (ban) the MAC addresses that aren't pre-approved. This was a huge mistake on their part. So here is a method that allows you to spoof your MAC (ghosting) address and regain access to the network.
Method 1: Go to the market and download 2 apps, "BusyBox" and "MAC Spoofer (changer)". Install BusyBox and run it to give it SU permissions. Then run MAC Spoofer and give it permissions. Turn on your wifi and try to connect to the desired network. If you are blacklisted, it will just loop over and over trying to connect. Don't stop it from looping. Press the home button and then open MAC Spoofer. Now, when you run MAC Spoofer there will be a black box in the center of the screen and it should say ">CHECKING FOR ROOT PERMISSION AND WIFI FILE: OK!" then on the next line it will show your original MAC address and your current one. In the entry box between the black box and the spoof button, you can enter your desired address and press "Spoof my MAC". It will then say ">ATTEMPTING TO MODIFY MAC ADDRESS:" and on the next 2 lines it will show your original and current MAC. On the last line it should say "**SUCCESS** MAC OF INTERFACE wlan0 CHANGED TO: (Whatever you chose)". Now you can exit the app and go back to your wifi network selection. Select the network you were trying to join and it should connect.
I hope this works for you all. If you have any questions or issues, just reply to this thread. Don't forget to give me a thanks!
Note: Your MAC will reset to the original MAC when you turn off your wifi or if your reboot your phone.
Note: I am running ME7 with 4.2.2 JellyBean and stock rom.
(Deleted)
Any .apk or .zip I can flash that will allow me to have the Fallout terminal lock screen as my lock screen. When you access a locked terminal it has all that random strings of letters, number, symbols and words and you select the password out of that. When I awake my lg g3 running newest CM13 nightly I want to swipe and it open a screen exactly like on the terminal and have to select my password that I have chosen to be my password. Of course with the audio of the terminal in the game too when opening it, all the random strings appearing, selecting the wrong password , selecting the correct password. I would like it to be an option in the lock screen menu though so I can easily switch from it to a pin or just swipe or no lock screen at all and then back to fallout terminal as I please. Thanks!
Hi everyone,
Is there any people already used Multiple users in MIUI?
I need to use Multiple android users on my Redmi Note 8T running MIUI 11 very much.
In order to do that I turned off MIUI optimizations and changed build.prop(via unlocking bootloader) to have:
fw.max_users=5
fw.show_multiuserui=1
Also tried adding:
fw.show_hidden_users=1
fw.power_user_switcher=1
I see the "Multiple Users" option in Settings now.
However, when I create New User, finish it's setup process and switch back to Owner,
I can't use this New User anymore. It doesn't let me switch to it again. (Click on "New User" in users list does nothing.)
Also there is no User icon in notification bar menu to switch users.
I have a guess why:
1) MIUI Second Space feature: when I create new user and set up it's profile I constantly see Second Space Icon in the notification bar near battery percentage.
And only way it lets me switch back to Owner is clicking on "Switch" Icon (which was automatically created shortcut at main screen). Clicking Owner in "Multiple Users" menu does nothing.
2) not as plausible as first one but: When I create new user profile it doesn't let me finish the process without setting it's password first. Maybe
Second Space logic somehow can't use new profile password.
Is there any people already used Multiple users in MIUI?
Or maybe someone have any ideas on how to disable Second Space interception of users switch with modifying some prop files or other system files?
I will appreciate any help with this very much.
PS. Also I know there is an option to switch users via running terminal/shell commands, but it's not so convinient to run these commands every time and it requires root.
I prefer to not root the device and try every option I can first.
If there is nothing to do with that, then I am willing to use Lineage OS instead of rooted MIUI.
Thanks for any feedback!
I have the same issues, I add a new user from 'multiple users' in settings, but I have no way of actually switching back and forth between user profiles. Even EMUI allows this, which I never knew was possible up until a few days ago.
Any Updates?
I have same problem.
Is there a fix?
I m also searching for this only...
Is anyone knows this?
realdidi said:
Hi everyone,
Is there any people already used Multiple users in MIUI?
I need to use Multiple android users on my Redmi Note 8T running MIUI 11 very much.
In order to do that I turned off MIUI optimizations and changed build.prop(via unlocking bootloader) to have:
fw.max_users=5
fw.show_multiuserui=1
Also tried adding:
fw.show_hidden_users=1
fw.power_user_switcher=1
I see the "Multiple Users" option in Settings now.
However, when I create New User, finish it's setup process and switch back to Owner,
I can't use this New User anymore. It doesn't let me switch to it again. (Click on "New User" in users list does nothing.)
Also there is no User icon in notification bar menu to switch users.
I have a guess why:
1) MIUI Second Space feature: when I create new user and set up it's profile I constantly see Second Space Icon in the notification bar near battery percentage.
And only way it lets me switch back to Owner is clicking on "Switch" Icon (which was automatically created shortcut at main screen). Clicking Owner in "Multiple Users" menu does nothing.
2) not as plausible as first one but: When I create new user profile it doesn't let me finish the process without setting it's password first. Maybe
Second Space logic somehow can't use new profile password.
Is there any people already used Multiple users in MIUI?
Or maybe someone have any ideas on how to disable Second Space interception of users switch with modifying some prop files or other system files?
I will appreciate any help with this very much.
PS. Also I know there is an option to switch users via running terminal/shell commands, but it's not so convinient to run these commands every time and it requires root.
I prefer to not root the device and try every option I can first.
If there is nothing to do with that, then I am willing to use Lineage OS instead of rooted MIUI.
Thanks for any feedback!
Click to expand...
Click to collapse
Bro what is that terminal command plz tell
realdidi said:
Hi everyone,
Is there any people already used Multiple users in MIUI?
I need to use Multiple android users on my Redmi Note 8T running MIUI 11 very much.
In order to do that I turned off MIUI optimizations and changed build.prop(via unlocking bootloader) to have:
fw.max_users=5
fw.show_multiuserui=1
Also tried adding:
fw.show_hidden_users=1
fw.power_user_switcher=1
I see the "Multiple Users" option in Settings now.
However, when I create New User, finish it's setup process and switch back to Owner,
I can't use this New User anymore. It doesn't let me switch to it again. (Click on "New User" in users list does nothing.)
Also there is no User icon in notification bar menu to switch users.
I have a guess why:
1) MIUI Second Space feature: when I create new user and set up it's profile I constantly see Second Space Icon in the notification bar near battery percentage.
And only way it lets me switch back to Owner is clicking on "Switch" Icon (which was automatically created shortcut at main screen). Clicking Owner in "Multiple Users" menu does nothing.
2) not as plausible as first one but: When I create new user profile it doesn't let me finish the process without setting it's password first. Maybe
Second Space logic somehow can't use new profile password.
Is there any people already used Multiple users in MIUI?
Or maybe someone have any ideas on how to disable Second Space interception of users switch with modifying some prop files or other system files?
I will appreciate any help with this very much.
PS. Also I know there is an option to switch users via running terminal/shell commands, but it's not so convinient to run these commands every time and it requires root.
I prefer to not root the device and try every option I can first.
If there is nothing to do with that, then I am willing to use Lineage OS instead of rooted MIUI.
Thanks for any feedback!
Click to expand...
Click to collapse
I had a Same problem with my xiaomi redmi 9A but I have figured out the solution. So if u r still interested then reach me here "email: [email protected]" 0r tel: 0789644207.
realdidi said:
Hi everyone,
Is there any people already used Multiple users in MIUI?
I need to use Multiple android users on my Redmi Note 8T running MIUI 11 very much.
In order to do that I turned off MIUI optimizations and changed build.prop(via unlocking bootloader) to have:
fw.max_users=5
fw.show_multiuserui=1
Also tried adding:
fw.show_hidden_users=1
fw.power_user_switcher=1
I see the "Multiple Users" option in Settings now.
However, when I create New User, finish it's setup process and switch back to Owner,
I can't use this New User anymore. It doesn't let me switch to it again. (Click on "New User" in users list does nothing.)
Also there is no User icon in notification bar menu to switch users.
I have a guess why:
1) MIUI Second Space feature: when I create new user and set up it's profile I constantly see Second Space Icon in the notification bar near battery percentage.
And only way it lets me switch back to Owner is clicking on "Switch" Icon (which was automatically created shortcut at main screen). Clicking Owner in "Multiple Users" menu does nothing.
2) not as plausible as first one but: When I create new user profile it doesn't let me finish the process without setting it's password first. Maybe
Second Space logic somehow can't use new profile password.
Is there any people already used Multiple users in MIUI?
Or maybe someone have any ideas on how to disable Second Space interception of users switch with modifying some prop files or other system files?
I will appreciate any help with this very much.
PS. Also I know there is an option to switch users via running terminal/shell commands, but it's not so convinient to run these commands every time and it requires root.
I prefer to not root the device and try every option I can first.
If there is nothing to do with that, then I am willing to use Lineage OS instead of rooted MIUI.
Thanks for any feedback!
Click to expand...
Click to collapse
I had a Same problem with my xiaomi redmi 9A but I have figured out the solution. So if u r still interested then reach me here "email: [email protected]" 0r Tel: +256789644207 Or via Whatsapp: +256789644207.
sam107 said:
I m also searching for this only...
Is anyone knows this?
Click to expand...
Click to collapse
I had a Same problem with my xiaomi redmi 9A but I have figured out the solution. So if u r still interested then reach me here "email: [email protected]" 0r Tel: +256789644207 Or via Whatsapp: +256789644207
tzahik1 said:
Any Updates?
I have same problem.
Is there a fix?
Click to expand...
Click to collapse
I had a Same problem with my xiaomi redmi 9A but I have figured out the solution. So if u r still interested then reach me here "email: [email protected]" 0r Tel: +256789644207 Or via Whatsapp: +256789644207
10000% working solution.
Download Security core component v25 apk from here:https://www.apkmirror.com/apk/xiaomi-inc/security-core-component/security-core-component-25-release/
Download quick-short-cut maker from here:
Download QuickShortcutMaker APK for FRP Bypass (All Version) - Latest 2022
Download QuickShortcutMaker apk It makes a shortcut for every pre-installed Android application and let you FRP Bypass from your phone,
www.bypassfrpfiles.com
Install both the packages to ur phone
Launch quick shortcut maker
Under activities tab in quick shortcut maker, look for security core component And click on it.
U will view so many icons then select 2nd option which says second space
After that click on the Try this option.
Go through the setup process And complete setting up ur second space but remember to password ur space so as to distinguish between them.
Also remember to select the use password to switch between spaces.
When ur space is ready u can always open quick shortcut maker and under the security componetns option try all the available options to complete ur setup process like sharing apps, duo apps, shared files, contacts e.t.c.
There now u r done......