Related
Today a tried ogo2's beta3 ROM. In SetCPU I can't change the frequency. There are min 480-max 600 Mhz, if I change the value, nothing happens. That's wrong because it drains my battery.
Yeah, same problem here... such a pity because other than that its a great ROM!
Not really an 'issue' - the kernel isn't set up to allow overclocking, so why would it?
Not just overclocking. I can't go under 480 Mhz. That's a bigger problem for me.
cserepg said:
Not just overclocking. I can't go under 480 Mhz. That's a bigger problem for me.
Click to expand...
Click to collapse
I don't think the kernel allows you to change clock speeds from the MAX600 MIN480 HTC set as the default. Not an issue, but that feature will be added sometime (ogo2 said it would eventually I think)
OK, I thought that the default min clock speed is 245 Mhz.
Oh ok, didn't know it depended on the kernel, thanks.. This may be a totally noob question, but this is the Q&A section so, can I not just flash another kernel that does enable overclocking...?
Guys, cannot start neither beta3 nor beta4. When flash beta3 (through Clockworkmod 3), the system doesn't load, green 'HTC' letters tend to reboot. After beta4 installation the same screen, but static - without any reboots. I have S-ON. Wiping doesn't help.
Please, advise what to do.
Cheers!
cserepg said:
Today a tried ogo2's beta3 ROM. In SetCPU I can't change the frequency. There are min 480-max 600 Mhz, if I change the value, nothing happens. That's wrong because it drains my battery.
Click to expand...
Click to collapse
I eventually answered my own question.. You can just flash another kernel.. Look under the Overclocking tutorial in the Dev section...
It's ok now, I am using B-ROM. In this I've got too much reboot, battery drain, GPS issues, etc. Maybe beta 5-6-7 will get a chance...
cserepg said:
It's ok now, I am using B-ROM. In this I've got too much reboot, battery drain, GPS issues, etc. Maybe beta 5-6-7 will get a chance...
Click to expand...
Click to collapse
I'm using Blay0's ROM as well, haven't had any issues so far... are u doing a full wipe before you flash the ROM...?
If I installing a different ROM I always do a full wipe sure. I did not do full wipe, if I installing a newer version of a same ROM. Btw the most stable ROM is Blayo's, next Cyanogen, but there are no new sense...
I have Galaxy 5.0 player (US version) running Eryigit-GB-2.3.6 ROM on it from last 6 months, While everything worked great during that time, i want to try one of the newer ROMs now, may be ICS if all the bugs have been fixed. Can anybody help me where to start now, I used Odin before, I have no idea about Heimdall..Can i still use Odin? also can anyone recommend me what ROM i should go for ? and what should be the correct steps to flash it again? do i need to backup the current ROM?
thanks in advance.
ministerjee said:
I have Galaxy 5.0 player (US version) running Eryigit-GB-2.3.6 ROM on it from last 6 months, While everything worked great during that time, i want to try one of the newer ROMs now, may be ICS if all the bugs have been fixed. Can anybody help me where to start now, I used Odin before, I have no idea about Heimdall..Can i still use Odin? also can anyone recommend me what ROM i should go for ? and what should be the correct steps to flash it again? do i need to backup the current ROM?
thanks in advance.
Click to expand...
Click to collapse
I'm in the same position as you. I know how to use CWM (I think), at least it worked for me before.
I would like to try out JackpotClavin's apparently awesome :good: new Kernel.
Should I wait for the PAC-Man version of iurnait or just flash jackpot's rom?
Lots of bugs are still being reported, so I'm wondering if it's already running stable enough for daily use.
And do I need to make a clean install if I install Jackpot's ROM now and later on want to switch to PAC-Man?
Thanks in advance!
I've been keeping with the Jellybean releases as they come, and would say it's definitely good enough for daily use. The only thing that doesn't work yet on 4.2.2 is taking pictures with the rear camera.
The speed and fluidity of the UI is definitely worth checking out and a lot of apps use the new framework. Overall, it just feels like a much more polished and intuitive experience.
If you are going from gingerbread to jellybean you have to wipe or you'll get some serious issues. coming from ice cream sandwich or 4.1 jellybean, you should be fine with just wiping /cache, /system, and the dalvik cache. coming from any other 4.2 rom, you're perfectly fine.
halomademeapc said:
I've been keeping with the Jellybean releases as they come, and would say it's definitely good enough for daily use. The only thing that doesn't work yet on 4.2.2 is taking pictures with the rear camera.
The speed and fluidity of the UI is definitely worth checking out and a lot of apps use the new framework. Overall, it just feels like a much more polished and intuitive experience.
If you are going from gingerbread to jellybean you have to wipe or you'll get some serious issues. coming from ice cream sandwich or 4.1 jellybean, you should be fine with just wiping /cache, /system, and the dalvik cache. coming from any other 4.2 rom, you're perfectly fine.
Click to expand...
Click to collapse
Okay, thanks. That sounds good.
Tomorrow I will probably try and flash Jackpot's Rom then.
As I am coming from Eryigit-GB-2.3.6 ROM I will have to do a full wipe first and then I am good to go flashing from CWM? Or do I have to install another Kernel first, and/or format everything?
Thanks for your help!
my problem is i do not have CWM installed. If i remember correctly i used SuperoneClick to root and Odin to put Gingerbread ROM with Entrophy512's Kernel.
Do i need to install CWM before i try another rom?
Looks like we still do not have any ICS/JB ROM with all bugs fixed????
ministerjee said:
my problem is i do not have CWM installed. If i remember correctly i used SuperoneClick to root and Odin to put Gingerbread ROM with Entrophy512's Kernel.
Do i need to install CWM before i try another rom?
Looks like we still do not have any ICS/JB ROM with all bugs fixed????
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1445840
It states here, that Entropy's kernel does in fact come with CWM. And if you're on the same version of Erygit's Rom as I am (3.5), then you should have an application called RebootMenu, where you can choose to reboot directly into recovery.
Weird
Okay now, I managed to flash it, wasn't as easy as I thought, though Lots of assert failed errors, google apps not installing, etc. but now everything is working fine!
i do have rebootmenu and i can reboot into CWM.i want to try Chips ROM.i think its very stable like my current one Eryigit
do i do this after copying rom on SD card???
Backup Existing ROM
Wipe Data and Cache
install from zip
reboot
ministerjee said:
i do have rebootmenu and i can reboot into CWM.i want to try Chips ROM.i think its very stable like my current one Eryigit
do i do this after copying rom on SD card???
Backup Existing ROM
Wipe Data and Cache
install from zip
reboot
Click to expand...
Click to collapse
Yes that will work great.
thanks
one last question
how is the battery life on Chips ROM, is it same as Eryigit. ???????
On Eryigit it pretty good, (just doesnot go over 80 fully charged)
How to install jelly bean coming from stock gingerbread ?
halomademeapc said:
I've been keeping with the Jellybean releases as they come, and would say it's definitely good enough for daily use. The only thing that doesn't work yet on 4.2.2 is taking pictures with the rear camera.
The speed and fluidity of the UI is definitely worth checking out and a lot of apps use the new framework. Overall, it just feels like a much more polished and intuitive experience.
If you are going from gingerbread to jellybean you have to wipe or you'll get some serious issues. coming from ice cream sandwich or 4.1 jellybean, you should be fine with just wiping /cache, /system, and the dalvik cache. coming from any other 4.2 rom, you're perfectly fine.
Click to expand...
Click to collapse
I have stock gingerbread on my player and flashed CWM v5.0.2.7 and I want install the PAC MAN ROM 4.2.2. The install instructions say to wipe data, dalvik, system and dbdata. But I can't find anything that says dbdata on my player the closes one I found was format /datadata. What exactly do i need to do so i can install this ROM on to my player and get it working ? I'm a noob to flashing roms
Ki6465 said:
I have stock gingerbread on my player and flashed CWM v5.0.2.7 and I want install the PAC MAN ROM 4.2.2. The install instructions say to wipe data, dalvik, system and dbdata. But I can't find anything that says dbdata on my player the closes one I found was format /datadata. What exactly do i need to do so i can install this ROM on to my player and get it working ? I'm a noob to flashing roms
Click to expand...
Click to collapse
yea, its named /datadata in older versions of CWM, so wipe that
iurnait said:
yea, its named /datadata in older versions of CWM, so wipe that
Click to expand...
Click to collapse
Thank you , I installed the ROM and it worked. :good:
Ki6465 said:
Thank you , I installed the ROM and it worked. :good:
Click to expand...
Click to collapse
Should also try mercuis new kernel or sultan kernel with it!
Sent from my YP-G70 using xda premium
lazepr said:
Should also try mercuis new kernel or sultan kernel with it!
Sent from my YP-G70 using xda premium
Click to expand...
Click to collapse
I have the sultan kernel installed and its good though i don't overclock beyond 1.2 if i do i start to get force closes in apps. I haven't tried mercuis new kernel. Is there a kernal to get better battery life ?
we have both lowered in our kernels lcd screen voltage which greatly improves batterylife You can also lower cpu voltages but if your device turns off while overcloking that means your chip has poor quality
Wysyłane z mojego Nexus S za pomocą Tapatalk 2
kernel
Well I'm looking for a kernel that has the 100 MHz and 200 MHz range included since all I pretty much do is listen to music. When I had stock rom, kernel, everything I had amazing battery life on both music playback and standby time. I just installed the the sultan kernel r4 and the lowest CPU speed is 400mhz. Wish the lowest speed was 100 MHz speed. is ever going to be at 100 MHz or at least 200mhz ?
Voltage difference is slight between 200mhz and 400mhz and 100mhz has equal to 200mhz 100 is totally useless unless you don't undervolt
Wysyłane z mojego Nexus S za pomocą Tapatalk 2
Ki6465 said:
Well I'm looking for a kernel that has the 100 MHz and 200 MHz range included since all I pretty much do is listen to music. When I had stock rom, kernel, everything I had amazing battery life on both music playback and standby time. I just installed the the sultan kernel r4 and the lowest CPU speed is 400mhz. Wish the lowest speed was 100 MHz speed. is ever going to be at 100 MHz or at least 200mhz ?
Click to expand...
Click to collapse
100MHz and 200MHz were causing SODs so as a dirty fix KOala and I removed them from our kernels. However, the SODs might be fixed now so I'm going to test 100MHz and 200MHz again today
Also, 100MHz and 200MHz are pretty useless because they're too weak to do anything. When the screen is off the player sets the CPU to 800MHz so having 200MHz and 100MHz won't get you better battery life if you're listening to music while the screen is off.
Sent from my HTC Sensation using xda app-developers app
android1234567 said:
100MHz and 200MHz were causing SODs so as a dirty fix KOala and I removed them from our kernels. However, the SODs might be fixed now so I'm going to test 100MHz and 200MHz again today
Also, 100MHz and 200MHz are pretty useless because they're too weak to do anything. When the screen is off the player sets the CPU to 800MHz so having 200MHz and 100MHz won't get you better battery life if you're listening to music while the screen is off.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
Well hopefully they work. :fingers-crossed:
Q&A for [KERNEL] [I9300] [Samsung JB] Boeffla-Kernel 5.3/6.0 (08-07-2014)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
No sound during call
This might be one of the best kernels for the 4.4 roms out there but it has just one problem in my device : there's no sound during calls. This happens only when I have Boeffla , as soon as I flash another kernel the sound fixes. I have tried uninstalling Boeffla Config and running the kernel without it but it's the same. How to solve this ? Thank you.
eb6 said:
This might be one of the best kernels for the 4.4 roms out there but it has just one problem in my device : there's no sound during calls. This happens only when I have Boeffla , as soon as I flash another kernel the sound fixes. I have tried uninstalling Boeffla Config and running the kernel without it but it's the same. How to solve this ? Thank you.
Click to expand...
Click to collapse
Hi,
make sure your init.d folder does not contain left overs of other kernels.
Especially when you were on Agni Pure before, this is a known issue as it overwrites Boeffla-Settings in an incompatible way.
Andi
eb6 said:
This might be one of the best kernels for the 4.4 roms out there but it has just one problem in my device : there's no sound during calls. This happens only when I have Boeffla , as soon as I flash another kernel the sound fixes. I have tried uninstalling Boeffla Config and running the kernel without it but it's the same. How to solve this ? Thank you.
Click to expand...
Click to collapse
Lord Boeffla said:
Hi,
make sure your init.d folder does not contain left overs of other kernels.
Especially when you were on Agni Pure before, this is a known issue as it overwrites Boeffla-Settings in an incompatible way.
Andi
Click to expand...
Click to collapse
I had similar problem with sound. Just before writting here I realized that I flashed again Boeffla after testing different kernel. After cleaning - see above - issue disapperared.
Wrong section, delete.
kernel issue
hi good night i install the kernel today with the rom back-to-n00t- and when boot i lose my sdcard (internal) i uset a cwm touch as well and have a issue with that, i have to remove the kernel for keep my internal sdcard, some can help me?
Cwm touch comes with it's own kernel, so this proves it is not a kernel problem.
Must be something else, maybe a defective sd card...
Lord Boeffla said:
Cwm touch comes with it's own kernel, so this proves it is not a kernel problem.
Must be something else, maybe a defective sd card...
Click to expand...
Click to collapse
im i mean with de internal storage, i dont have a sd card chip at this momento, when try to get in on the sd into cwm touch and intal zip, say sdcard/0/ seems the kernel put the "/0" to my phone. before flashing the new cwm touch i used a TWR and trying to flash get a error on this kernel. some help?
thx
Hi Andi,
triangle away will work on QS-kk rom?
mahe. said:
Hi Andi,
triangle away will work on QS-kk rom?
Click to expand...
Click to collapse
I never tried it. I am not very sure Triangle Away is compatible with any S3 kk rom.
I would be very cautious to not end up in a brick.
I recall I purposely did not put native TriangleAway support into my 6.x series kernel, to not open up any risk here.
Andi
Lord Boeffla said:
I never tried it. I am not very sure Triangle Away is compatible with any S3 kk rom.
I would be very cautious to not end up in a brick.
I recall I purposely did not put native TriangleAway support into my 6.x series kernel, to not open up any risk here.
Andi
Click to expand...
Click to collapse
Andi,
could you please add above mentioned suggestion in op if not done already? i think this very good piece of information.
Hello.
In NIK60 ROM v.3.0 (4.4.4) I installed Kernel Boeffla 6 Beta 6 with the latest Boeffla Config V2 with Boeffla Config change the values and to reset the phone's settings Governor, the Governor's profile and Internal memory back to their default values pegasusq, standard and CFQ. The other parameters I've changed if maintained.
Where can be the problem? I have proven to Beta 5 and with different versions of Boeffla Config and the result is the same.
Sorry for my bad English.
Thank you
xileftld said:
Hello.
In NIK60 ROM v.3.0 (4.4.4) I installed Kernel Boeffla 6 Beta 6 with the latest Boeffla Config V2 with Boeffla Config change the values and to reset the phone's settings Governor, the Governor's profile and Internal memory back to their default values pegasusq, standard and CFQ. The other parameters I've changed if maintained.
Where can be the problem? I have proven to Beta 5 and with different versions of Boeffla Config and the result is the same.
Sorry for my bad English.
Thank you
Click to expand...
Click to collapse
Must have something to do with the rom.
It seems like
- either you have scripts init.d that overwrite the settings
- you have another app that resets this stuff again
- the rom start takes extremely long (you can give additional startup delay in boeffla-configs settings for a try)
Unfortunately there is no way to do a better diagnose without having your phone in hands.
But... there are reasons why I recommend going on pretty clean roms like JustArchis Port. There these kind of things do not happen.
Andi
Lord Boeffla said:
Must have something to do with the rom.
It seems like
- either you have scripts init.d that overwrite the settings
- you have another app that resets this stuff again
- the rom start takes extremely long (you can give additional startup delay in boeffla-configs settings for a try)
Unfortunately there is no way to do a better diagnose without having your phone in hands.
But... there are reasons why I recommend going on pretty clean roms like JustArchis Port. There these kind of things do not happen.
Andi
Click to expand...
Click to collapse
Just try to Blekota ROM 8.1 and the result is the same, previously had Blekota 8.0 and had no problem.
The install has been fully cleaned, wiping up the internal sd.
Init.d folder only has 2 files and 99SuperSUDaemon 85sqlite
Thank you.
xileftld said:
Just try to Blekota ROM 8.1 and the result is the same, previously had Blekota 8.0 and had no problem.
The install has been fully cleaned, wiping up the internal sd.
Init.d folder only has 2 files and 99SuperSUDaemon 85sqlite
Thank you.
Click to expand...
Click to collapse
I am sorry, but I have no time to try all sort of roms. That's what you users need to do.
I officially do not support the roms you mentioned, only Archiport. So, if all works, fine. But if not, it is like it is.
Especially on the 6.x kernel series I do give only very limited support as it is kinda inofficial and experimental kernel only.
If it worked fine on Blekota 8.0 and not on 8.1 anymore, it is quite obvious something changed which broke some functionality. But as said, I cannot support all roms around as my day only has 24 hours
Thanks for understanding
Andi
Ok, let's start writing in this Boeffla Q&A thread
zRam...for needing multitasking if not working that good...but which values???
I'm on stock 1 device 300mb and 80 swappiness....any other super better setting???
Tnx!
Sent from my Samsung Galaxy S3 GT-i9300 using TapaTalk2
PIRATA! said:
Ok, let's start writing in this Boeffla Q&A thread
zRam...for needing multitasking if not working that good...but which values???
I'm on stock 1 device 300mb....any other super better setting???
Tnx!
Sent from my Samsung Galaxy S3 GT-i9300 using TapaTalk2
Click to expand...
Click to collapse
WHEN (!) I use zram, I use 600 MB total size with 4 devices.
But I almost never use it, I am a lean user, I always close my apps with back button. So zRam is not required for me.
Andi
installed on a fresh V5 coming from a V2, changed nothing in the settings, works flawlessly. Smooth and fast, thanks man!
SHV E210K
I 'm using S3 SHV E210K and my phone don't boot when i flash boeffla kernel.
Do boeffla kernel support my phone?
Lame question maybe. Should I turn the S3 power saving feature on while running a power saving profile or is it useless?
Q&A for [KERNEL][Apolo JB 4.14,New 7.1][SAMMY ROMS and AOSP]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
How to built my own version
This kernel is wonderful. But if the among of apps grows up, the system will become slowly and stucky. I want to add zram and memory merge support for this kernel. However, I don't know what to use that source that posted on github for doing this. Apolo 7.1 seems doesn't have a kernel repository, but just a init repository? What should I do? I am new in making kernel. Thanks.
My huge thanks to the developers of this amazing Kernel. I really appreciate your work. It works perfect with NeatRom 8 ! Thank you.
Apolo Kernel Config
Hey guys I'm using KK Neatrom V8.0st with KERNEL Apolo_7.1_CM_Regular. What is the best of scheduler/governor for this rom?
Apolo voltage versions - I still don't understand
Ok, I've read OP and searched relevant replies and I still don't get what's the real difference between particular Apolo voltage versions and the difference between flashing another version and just setting corresponding voltage presets in configurator app.
So, there are CPU, GPU and "internals" voltages. In Regular and Extreme GPU and internal are set to -50mV (according to OP), so there is no difference in these. The only difference seems to be in CPU voltages - which can easily be set in app. Where is the catch?
Yesterday I also made an interesting investigation (maybe relevant to this question). I had an issue with wifi not working with Apolo/NeatRom combination. Apolo Regular worked fine but Extreme V0 didn't, other conditions being absolutely equal. I can understand that lower voltage may lead to certain parts of the SoC not working properly. But again - the internal voltages are the same in Reg and V0. (This problem was solved by clean reflash of ROM and kernel.)
Edit: OK, I now read the OP one more time and found Voltages PDF. This explains everything....
nalott said:
Ok, I've read OP and searched relevant replies and I still don't get what's the real difference between particular Apolo voltage versions and the difference between flashing another version and just setting corresponding voltage presets in configurator app.
So, there are CPU, GPU and "internals" voltages. In Regular and Extreme GPU and internal are set to -50mV (according to OP), so there is no difference in these. The only difference seems to be in CPU voltages - which can easily be set in app. Where is the catch?
Yesterday I also made an interesting investigation (maybe relevant to this question). I had an issue with wifi not working with Apolo/NeatRom combination. Apolo Regular worked fine but Extreme V0 didn't, other conditions being absolutely equal. I can understand that lower voltage may lead to certain parts of the SoC not working properly. But again - the internal voltages are the same in Reg and V0. (This problem was solved by clean reflash of ROM and kernel.)
Edit: OK, I now read the OP one more time and found Voltages PDF. This explains everything....
Click to expand...
Click to collapse
Please give the link for PDF File
Esk_maghdouni said:
Please give the link for PDF File
Click to expand...
Click to collapse
Press the button under "More information and Voltages values" heading in the OP. The whole hidden text under this button is interesting and there is also the link you need.
Esk_maghdouni said:
Hey guys I'm using KK Neatrom V8.0st with KERNEL Apolo_7.1_CM_Regular. What is the best of scheduler/governor for this rom?
Click to expand...
Click to collapse
OK now I choosed sio/zzmoove. It seems to be good Config. Anybody has another idea? please advise.
nalott said:
Press the button under "More information and Voltages values" heading in the OP. The whole hidden text under this button is interesting and there is also the link you need.
Click to expand...
Click to collapse
Thanks mate
tar file
where can i find tar file for this kernel so i can use with odin?
It works perfect with NeatRom 8 ! Thank you.:angel:
I cannot find BFQ I/O in your new kitkat version anymore , it is something wrong with it?
- SPEEDUP KEYRESUME (Faster wake up at power button and incoming call)
Click to expand...
Click to collapse
No improvements for me. Still ~2 sec delay.
Anyone felt the difference?
[ROM][5.0.1][I9100] CyanogenMod 12 [ALPHA][12/22]
I have an internal memory of 12 GB problem instead I only 1.89 GO
thank you
@pedestre : would you consider making cpu thermal limits editable? Also, the "ZEN" i/o is pretty decent, should you want to check it out.
Sent from my GT-I9100 using XDA Free mobile app
Break the wifi on slimsaber
Hi, the latest beta (7.2 beta 3) installed over SlimSaber 21/12 breaks the wifi and i can turn it on. Any workaround? thanks.
7.2 beta 3 OMNI (zeitferne fix) works OK
I am on the 7.2 beta 3 OMNI version of your kernel (with zeitferne fix) since 24h now.
Everything works OK, very smooth. Not a single problem so far.
Thanks for bringing back the BFQ i/o in your 7.2 beta 3 , Keep it up!
zzmoove + BFQ = Awesome
Fix for Fuse bug in 4.x branch ?
I see that 4.X branch beta 2 does not have fuse bug included. Is it possible to add this?
geoff10 said:
where can i find tar file for this kernel so i can use with odin?
Click to expand...
Click to collapse
Hey guys,
Is it possible to get .tar files of the latest KitKat or Lollipop versions of this wonderful kernel that are flashable via Odin? Would love to use them in order to install Lollipop on my phone.
Thanks in advance and best regards
Edit: A user from a German Android Forum (www.android-hilfe.de) was so kind to create and provide the different kernel versions as .tar files for Odin. Here goes the link. Thanks a lot to KST66!
Edit 2: Also just saw that @gsstudios provided the .tar files in the development thread. Thanks a lot to him as well!
Q&A for [KERNEL][OC 1.6ghz ][d620] kool-aid 1.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][OC 1.6ghz ][d620] kool-aid 1.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I flashed the zip via CWM and all went fine. although I think GPU of doesn't work
UC 192 MHz reboot
Hi, first of all many thanks @invaderjohn for the great job.
I would inform you that, if I set the min freq on 192 Mhz instead of 300 my phone reboot about any 20 min.
Instead with the min freq at 300 everything it' s perfect and no reboot at all, the phone with cm12 and the new kernel it's great!
I use :
Max Freq 1593 Mhz
Min Freq 300 Mhz
Governor On-demand
Scheduler Cfq
If someone else have experience of reboot could try to set the min freq on 300 and check if that solve the issue
Custom kernel on stock
So I can't install this kernel on stock rom? Or is this possible in some way?
Thanks in advance
kultz said:
So I can't install this kernel on stock rom? Or is this possible in some way?
Thanks in advance
Click to expand...
Click to collapse
I would not recommend this, please.
kultz said:
So I can't install this kernel on stock rom? Or is this possible in some way?
Thanks in advance
Click to expand...
Click to collapse
no,it's impossible. john said that it is made for caf based rom like cm ora pac-man.
if you try to flash it on stock rom the phone wouldn't boot.
sorry for bad english! :crying:
kultz said:
So I can't install this kernel on stock rom? Or is this possible in some way?
Thanks in advance
Click to expand...
Click to collapse
xander33 said:
Hi, first of all many thanks @invaderjohn for the great job.
I would inform you that, if I set the min freq on 192 Mhz instead of 300 my phone reboot about any 20 min.
Instead with the min freq at 300 everything it' s perfect and no reboot at all, the phone with cm12 and the new kernel it's great!
I use :
Max Freq 1593 Mhz
Min Freq 300 Mhz
Governor On-demand
Scheduler Cfq
If someone else have experience of reboot could try to set the min freq on 300 and check if that solve the issue
Click to expand...
Click to collapse
I have been testing this kernel a lot but never stayed with underclocked longer than few mins to see it working. Well 300MHz is really ok for being battery friendly. Let me check on mine. I will change it your way and let's see what happens. Thanks
matbo said:
no,it's impossible. john said that it is made for caf based rom like cm ora pac-man.
if you try to flash it on stock rom the phone wouldn't boot.
sorry for bad english! :crying:
Click to expand...
Click to collapse
Okay, thanks.
Re. frequency below 300 MHz, it makes perhaps a bit sense, when being on powersave. Using ondemand or interactive with min 192 may lead to a collapse because of cpu scaling from a very mimimum to maximum. Using ondemand or interractive ur fine with the 300.
hello
i install it over the stock rom and as u can say my phone dont boot.
It s not for stock roms..cyanogen.. Pac man..resurrection..
Sent from my LG-D620 using XDA Free mobile app
Kool-aid kernel compatible with stock?
The kool-aid kernel it's compatible with the LG rom stock?
Sorry for my bad english, but I am Italian!
CyanogenPlus said:
The kool-aid kernel it's compatible with the LG rom stock?
Sorry for my bad english, but I am Italian!
Click to expand...
Click to collapse
Can't you at least read the one post before yours!?
Diaze said:
It s not for stock roms..cyanogen.. Pac man..resurrection..
Sent from my LG-D620 using XDA Free mobile app
Click to expand...
Click to collapse
Sent from my D620r [Stock 4.4.2]
performance in gaming
can someone tell me the performance of this in gaming, it will run smooth in gta san andreas?
undervolt
Hi, in the future you will implemented undervolt control? For better battery life.
OTG ?? 5GHz ??
QA Bot said:
Q&A for [KERNEL][OC 1.6ghz ][d620] kool-aid 1.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][OC 1.6ghz ][d620] kool-aid 1.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Click to expand...
Click to collapse
HI,
are u planing to add support for OTG and 5GHz ??
great work.
WoytazZer CZ said:
HI,
are u planing to add support for OTG and 5GHz ??
great work.
Click to expand...
Click to collapse
OTG is not supported from hardware (as i know) and 5GHz ?!?!?! for what?? CPU frequency or you mean something else???
OTG , 5GHz
AntonPanos said:
OTG is not supported from hardware (as i know) and 5GHz ?!?!?! for what?? CPU frequency or you mean something else???
Click to expand...
Click to collapse
OTG is not HW problem its only SW problem, because the booster which change Voltage from charger 5V to 3,7V battery can do it reverse. (tested on SonyEricsson LWW (2011), on stock its not working on OTG USB flash disk and on custom ROm its working great) and my friend whos working with this boosters , siad it should work - I will ask him for more details.
And Vagelis1608 working on it . http://forum.xda-developers.com/g2-mini/development/kernel-stock-kernel-modded-ramdisk-t3082562
5GHz I read it somewhere its should work on our SoC ( on CPA ROM I found it in setting ,maybe its bug only, but , but I did not test it , no 5GHz WiFi in reach , only 2,4GHz,)
WoytazZer CZ said:
OTG is not HW problem its only SW problem, because the booster which change Voltage from charger 5V to 3,7V battery can do it reverse. (tested on SonyEricsson LWW (2011), on stock its not working on OTG USB flash disk and on custom ROm its working great) and my friend whos working with this boosters , siad it should work - I will ask him for more details.
And Vagelis1608 working on it . http://forum.xda-developers.com/g2-mini/development/kernel-stock-kernel-modded-ramdisk-t3082562
5GHz I read it somewhere its should work on our SoC ( on CPA ROM I found it in setting ,maybe its bug only, but , but I did not test it , no 5GHz WiFi in reach , only 2,4GHz,)
Click to expand...
Click to collapse
I know about vaggelis' work and i'm thinking of testing it when i have the otg i need. But wait till it works about the 5GHz for our phone it is risky and i am sure about overheat problems.
Sent from my D620fr [Stock 4.4.2]
Suppose it doesn't support our official Lollipop?