Hello,
I am trying to connect my Wireless Xbox 360 controller to my Samsung Galaxy S3 with an USB-OTG adapter. It doesn't work though. When I try to connect the controller to the dongle, the lights on the controller just keeps flashing.
- When I plug the dongle into my phone, a notification saying a USB-connector is connected appears, but quickly disappears.
- When I plug the USB-OTG adapter out of my phone, a notification saying a USB connector is disconnected appears.
- I have followed this thread: http://forum.xda-developers.com/showthread.php?t=1792531 and downloaded both files, both put them into the right folders and run the script.
Still, my phone does not recognize any input from my controller. Can anybody help me with this?
Related
I guess I'm a total noob. I rebooted the tablet and now the 360 controls work fine! FFS
Read on if you want to know what the problem was...
I have tried to use my xbox360 wireless controller with wired PC dongle and a xbox360 wired control in the USB port of the dock and the wireless dongle lights up only when i push the button then i sync the control and the light goes off and the control wont map in any of the emu's or games I tried where the WII-mote worked. The wired one doesn't even turn on (flickers on then off .2 sec) when plugged in. Am I missing something do I have a defective doc? I also happen to have a ps3 control and that also doesn't work with the USB cable and the six-axises app. App says its compatible with the Transformer Prime but it always just asks me to pug the USB in even tho its plugged in. Any ideas? Does the Dock need a certain amount of charge does it have to be plugged into the wall to have enough power? Wireless dongle light goes off after the control is synced, is that normal? Could it be because its rooted?
(4.0.3 ICS brand spanking new Transformer Prime w/ wired 360 control, wireless PC dongle & wireless 360 control, and PS3 control with USB wire and Six-Axises app plugged to dock with no success)
Did you fix this? I have the same issue.
I have a two week old unrooted red 300 on 4.1.1 with dock, I already had a ps3 with controllers so my controller was previously paired with ps3 ( which may be the problem). As long as I have it connected via usb to my dock it works fine, but when I disconnect the controller shuts off. I see on youtube people just connect via usb, disconnect the usb and viola, playing bluetooth but mine is not working, is there any steps or apps that I need to have before I can play wirelessly. oh and yes my bluetooth is on lol.
akareem27 said:
I have a two week old unrooted red 300 on 4.1.1 with dock, I already had a ps3 with controllers so my controller was previously paired with ps3 ( which may be the problem). As long as I have it connected via usb to my dock it works fine, but when I disconnect the controller shuts off. I see on youtube people just connect via usb, disconnect the usb and viola, playing bluetooth but mine is not working, is there any steps or apps that I need to have before I can play wirelessly. oh and yes my bluetooth is on lol.
Click to expand...
Click to collapse
There shouldn't be anything special you need to do. Plug in the USB, with bluetooth on, hit the PS3 button to turn the controller on and the Bluetooth should connect with it. Double-check in the Bluetooth devices that it shows a PS3 Controller listed in the paired devices after performing the above steps.
When you disconnect the USB cable it should disconnect and turn off the controller. Just hit the PS3 button again and the lights should indicate a flash showing it's on and then switch to connected at controller 1 and the bluetooth devices will show connected in the ASUS settings.
-Nate
Hi,
i have a Cube U23GT tablet. It supports OTG. The tablet can be charged only trough DC in with an adaptor, so not trough usb port. I have an OTG cable, and if i plug with that a mouse in, or keyboard, it works perfectly. I saw on youtube some videos where people connected mouse and keyboard at the same time to their tablets, for example: youtube.com/watch?v=benblX95ORM
So as i saw this video i thinked: all i need is an USB HUB, i bought one: logilink.eu/showproduct/UA0138.htm?seticlanguage=en
I plugged the HUB in trough OTG and the result was: the LED of the hub lights are on, but then, when i try to plug the mouse OR (not just "AND") the keyboard, it wont work. The infra of the mouse is lights too but the tablet dont detect it, i cant use it.
So can you tell me what can be the problem? Its not a powered HUB i know, but on the videos that i saw (for example what i linked here) arent powered hubs too, and works.
If you can, please help me, thanks!
Hello friends,
I have an issue when trying to connect PS4 controller to my phone. First, I would like to inform that I have seen a lot of youtube how-to videos and none of them work for me.
So, basically when I'm connecting my PS4 controller to my Samsung Galaxy J7 2017 device via bluetooth - both devices see eachother and they are connected - Andoird status is OK, PS4 controller LED diode is not flashing but shine with constant light. Seems that everything is OK, but pushing ANY button on controller does not do anything on the phone. No move, nothing shows on the phone, icons are not underlight, nothing.
So I have PS4 controller from basic PS4 version and I bought second controller V2, also I have bunch of cables:
mini usb male <-> mini usb male
mini usb male <-> normal usb female
mini usb male <-> normal usb male
and similar
I tried all possible combinations of cables with both controllers V1 and V2 (controllers works fine with PS4 console). I tried to connect both controllers via bluetooth and connections works but that's it, nothing happens.
I tried all these combinations on Android 8.1 Oreo and Android 9.0 Pie - both original, I have no root on my phone.
Nothing. Works.
(What's courious, PC mouse connected via USB to phone works perfectly - I can see mouse coursor etc.)
I have no more ideas what to do. Please, kindly ask you for help
/up/
Can I count on your help please?
Hey guys,
So I recently bought a Hama USB hub, which connects to my phone with usb type c and its working fine with mouse and keyboard but not with a controller. I see the mouse cursor if I plug in, I can click on things etc... If I connect the controller it gets power but the games dont detect them. It only works with Steam Link which is weird. I tested it on 2 phone, Honor 10 and Mi Mix 2. I have a wireless xbox 360 controller and a wired Logitech F310. Please help, cant find a proper answer on google.