i just flashed a custom rom to my verizon and now i have no network and wifi always fails to obtain IP. i am on a rooted NC5 build. i tried restoring the APN to default and that failed. i am a noob and have searched the forums but have had no luck. i would be incredibly thankful for any help. please? and thanx
What Rom and did u flash modules?
no network
i installed bajarom v2.2, i am on ss v3.72, and am rootred by towelroot method.
jee12891 said:
i installed bajarom v2.2, i am on ss v3.72, and am rootred by towelroot method.
Click to expand...
Click to collapse
So did you flash the module?...you need to flash to enable radios....it's talked about all over the place. I use gigilies nc2 wifi fix zip for any kitkat based SS compatible rom.
sent by safestrap powered echo v26
no network after rom install on verizon s4
no i didnt flash the wifi fix. noob mistake apparently. i have that same module installed already too but didnt think to flash before bootin now i cant get into my safestrap recovery and i have no way of downloading busybox to enable ss. any suggestions?
jee12891 said:
no i didnt flash the wifi fix. noob mistake apparently. i have that same module installed already too but didnt think to flash before bootin now i cant get into my safestrap recovery and i have no way of downloading busybox to enable ss. any suggestions?
Click to expand...
Click to collapse
Must be a way to get busy box install on to your extsd card and install it from there. You still have root?
sent by safestrap powered echo v26
no network after rom install on verizon galaxy s4
no I do not have root permission
jee12891 said:
no I do not have root permission
Click to expand...
Click to collapse
You probably need to start all over...
sent by safestrap powered echo v26
No network after rom install on Verizon galaxy s4
So what rom/roms would you recommend?
jee12891 said:
So what rom/roms would you recommend?
Click to expand...
Click to collapse
All the safestrap compatible ones are worth a look. I have personally run hyperdrive. ..baja...echo...
sent by safestrap powered echo v26
I am running I545VRUEMJ7 and was wondering if I'd use this http://forum.xda-developers.com/showthread.php?t=2441441 to install Safestrap on my device. Also, what version would I use? v 3.71?
The only other concern I have is that I have Xposed Framework installed on my device, so should I completely uninstall it before trying to install Safestrap?
I do have root access already, but if there is any other do's and don'ts please let me know!
Thank you!
Update!
There is now a flashable option for mere mortals! If you have a deodexed TW ROM, you can install xposed installer, flash zip, and will have xposed.
Verified it in my S4 running Muniz_ri's OC1 stock, rooted, deodexed ROM. ROM must be deodexed for this to work.
It's new, so make a backup first!
See the OP here, use the V3 version of the framework flash file:
http://forum.xda-developers.com/showthread.php?t=3113463
Install Xposed installer 3.0 Alpha 2
Flash Xposed framework zip V3
Reboot, cache will rebuild
Run xposed and start adding modules.
Read up on modules, all aren't compatible.
Holy crap.
It's been sold. I have been debating heavily over the past week whether to stay on HyperdriveRLS21 KitKat or finally flash a custom Lollipop rom. Xposed is my life, and I told myself that the moment any sort of advancement of Xposed for TouchWiz_LP I would upgrade. I'll flash this Saturday to test this xposed out
(Echoe looks nice, but it seems that as of v49 the sending SMS/MMS is broken, if anyone knows of a stock-deodex I'd like a link)
Will Flashfire work for flashing this zip?
06sharpshot said:
Will Flashfire work for flashing this zip?
Click to expand...
Click to collapse
No idea...I'd ask on the thread.
There are issues w/some S4 variants and probably not working on our phone yet.
Kinks being worked out...i9505 issues are almost resolved according to the OP on the thread, and I'm hoping that will help for us as well, since we run i9505 kernels and ROMs w/some mods.
@SnyderGuy
There is a fix for SMS/MMS now. I'll update thus with the post link when I get home.
Arter97 made an update that completely fixes Xposed for our device! Install the xposed apk from rovo. Flash arter97's new V3 zip. Install the Lollipop memory leak fix module and Disable Samsung DVFS module for great performance.
Yup, just installed it today and verified it works! Updated OP.
Anyone get this to work? I flashed the V3 (I believe) and it bricked my device.
Which version should I download and is FlashFire okay to use?'
SCH-i545, 5.0.1 OC1, Rooted, Deodexed stock TW rom,
SnyderGuy said:
Anyone get this to work? I flashed the V3 (I believe) and it bricked my device.
Which version should I download and is FlashFire okay to use?'
SCH-i545, 5.0.1 OC1, Rooted, Deodexed stock TW rom,
Click to expand...
Click to collapse
I haven't tried myself but if you used Flashfire that would be my first suspect. I've seen that CWM may be needed. This is in its early days still.
Sent from my SCH-I545 using XDA Premium HD app
Just flashed this fix and I am waiting for the ROM to boot. It did as I typed this..
EchoeROM port by gigilie... Safestrap
SnyderGuy said:
Anyone get this to work? I flashed the V3 (I believe) and it bricked my device.
Which version should I download and is FlashFire okay to use?'
SCH-i545, 5.0.1 OC1, Rooted, Deodexed stock TW rom,
Click to expand...
Click to collapse
As I already said, working perfectly for me. Stock, rooted, deodexed OC1 ROM from Muniz_ri in the Android dev section here.
Follow the steps in the OP in the thread I linked to. Install the Xposed installer, flash the framework file (use V3).
Reboot after flashing the framework zip will rebuild your cache and then you can use Xposed as usual.
Not all modules are lollipop compatible!
Remember, requires deodexed ROM.
SnyderGuy said:
Anyone get this to work? I flashed the V3 (I believe) and it bricked my device.
Which version should I download and is FlashFire okay to use?'
SCH-i545, 5.0.1 OC1, Rooted, Deodexed stock TW rom,
Click to expand...
Click to collapse
I'm running v3 with no problems.
I'm still mdk bootloader and twrp recovery. I'm running Echoe v49 deodexed rom.
Sent from my SCH-I545
I actually flashed Xposed on Echoe v49. Works like normal. Used the Safestrap kernal changing thing to get access in safestrap but it still worked.
66gt350 said:
I'm running v3 with no problems.
I'm still mdk bootloader and twrp recovery. I'm running Echoe v49 deodexed rom.
Sent from my SCH-I545
Click to expand...
Click to collapse
I'm mdk as well but can't get echo to boot what all did u do to get it working (wifi as well)? Sorry for asking here..... Got excited.
this worked fine through muniz_ri's deodexed oc1, and flashed through flashfire perfectly for me.
skepticmisfit said:
this worked fine through muniz_ri's deodexed oc1, and flashed through flashfire perfectly for me.
Click to expand...
Click to collapse
Alpha 4 with v3 sdk?
Install Xposed installer 3.0 Alpha 2
Flash Xposed framework zip V3
Reboot
Run xposed and start adding modules.
Read up on modules, all aren't compatible.
zekesamas said:
I'm mdk as well but can't get echo to boot what all did u do to get it working (wifi as well)? Sorry for asking here..... Got excited.
Click to expand...
Click to collapse
I don't think that I had to do anything special to get it to boot. It's been a few days since I installed it, but I might have just cleared the cache. I haven't had any issues with wifi. It worked right away.
skepticmisfit said:
this worked fine through muniz_ri's deodexed oc1, and flashed through flashfire perfectly for me.
Click to expand...
Click to collapse
I was very hesitant to flash xposed via Flashfire, but after reading this decided to try it. Worked well! Of course we have a limited selection of modules and mostly look forward to Wanam. But at least it isn't bricked and see a great future!
Also have muniz_ri's deodexed oc1, Verizon I545
Right now I'm on the oc1 bl running stangs rom is it impossible get ss at all if there is I'm willing to go through all the steps to get it
you can't use safestrap on the oc1 bootloader
Safestrap on OF1 ?
skepticmisfit said:
you can't use safestrap on the oc1 bootloader
Click to expand...
Click to collapse
Am I understanding correctly that Safestrap will not support OF1 as well? I'm completely stock and just obtained root and would love to try loading some ROMs via SS.
jwhistler said:
Am I understanding correctly that Safestrap will not support OF1 as well? I'm completely stock and just obtained root and would love to try loading some ROMs via SS.
Click to expand...
Click to collapse
yes safestrap won't work, you may want to check out flashfire tho
I am at Lollipop 5.0 OC1 with root. I was never able to install suSuper or get OC2 to install while I was is SafeStrap so I installed a rooted Lollipop OC1 .tar via Flashfire. So far so good... except ATT wants to push an update on me, which I declined knowing I'd lose root.
I assume I need to/want to go to OC2 . What file would I use to do that and can I use Flashfire to do that? I don't have access to Odin on this machine (company machine is locked down and I can't add the Samsung drivers)
Can I install the StageFright fix via Flashfire as well?
http://forum.xda-developers.com/showthread.php?t=3132475
Sent from my SM-N9005 using Tapatalk
alphaeagle777 said:
http://forum.xda-developers.com/showthread.php?t=3132475
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thanks but had you read my question better (and that thread), you would have seen that I was asking about going from OC1 to OC2. I used Flashfire to get to OC1. I was asking if you can get from OC1 to OC2 using Flashfilre.
True,but so far I haven't seen oc2, yet,
Also i have been able to use flashfire to flash any oc1 based rom with out safestrap
Also please use the Q&A session
Sent from my SM-G920F using Tapatalk
ParrotSquawk said:
I am at Lollipop 5.0 OC1 with root. I was never able to install suSuper or get OC2 to install while I was is SafeStrap so I installed a rooted Lollipop OC1 .tar via Flashfire. So far so good... except ATT wants to push an update on me, which I declined knowing I'd lose root.
I assume I need to/want to go to OC2 . What file would I use to do that and can I use Flashfire to do that? I don't have access to Odin on this machine (company machine is locked down and I can't add the Samsung drivers)
Can I install the StageFright fix via Flashfire as well?
Click to expand...
Click to collapse
I'm pretty sure many here on xda took the oc2 update while on rooted oc1 and didn't loose root. carl1961 has a thread with the oc2 update zip. Check that thread out (can't remember exactly which thread sorry). It's a config file, rename to update.zip and don't see why Flashfire wouldn't flash. I hope this info helps