Hello all,
I had rooted my Asus Memo Pad Smart 10 with KingoRoot.
Bought SuperSU Pro and BusyBox Pro
Been using it for many months without issue
Went to options in SuperSU Pro to install itself as a system app
Tablet rebooted, but now only shows Asus logo without spinning dots and hangs
This is what I've tried so far:
------------------------------
Rebooted to recovery with Power button + Volume Down button
Showed the following:
Android cardhu-user bootloader <1.00 e> released by "US_epad-10.6.1.31-20130823" A03
key driver not found.. Booting OS
Starting Fastboot USB download protocol
It then has the usual 3 choices: RCK, Android, Wipe Data
I chose Wipe Data with Volume Up button
Then showed:
Please wait a few minutes..
Booting Recovery kernel image
Signature match.
Are you sure to wipe your user data?
Press <VOL_DOWN> to cancel,
Press <VOL_UP> to continue.
I pressed Volume Up button
Then showed the android with spinning hexagon-type cube in stomach
After about 5 seconds, it went back to Asus logo without spinning dots
------------------------------
------------------------------
After rebooting to recovery, I chose the Android option with Volume Up button
It showed:
Cold-booting Linux
Signature match.
Then it hangs
------------------------------
------------------------------
On my laptop, I downloaded latest firmware file for my Asus Memo Pad Smart 10 (ME301T), US_epaduser_10_6_1_31_UpdateLauncher.zip
Unzipped it to reveal US_epad-user-10.6.1.31.zip
Placed US_epad-user-10.6.1.31.zip onto MicroSD card and inserted into tablet
After rebooting, I chose the RCK option with Volume Up button
Rebooted with Power button + Volume Down button
Chose RCK with Volume Up
It showed:
Booting Recovery kernel image
Signature match.
Then showed dead android with red triangle with exclamation point
------------------------------
I can't get to the tablet with ADB because it no longer recognizes the device.
Can anyone help me flash the firmware?
SOLVED!
I was able to flash my firmware by renaming the zip file from "US_epad-user-10.6.1.31.zip" to "EP201_1024_SDUPDATE.zip"
Copied this file onto blank MicroSD card (formatted FAT32)
Pressed Power button and Volume Down simultaneously to reboot into recovery
Press Volume Up to select RCK
Yes!!!
jerryferreira said:
Hello all,
I had rooted my Asus Memo Pad Smart 10 with KingoRoot.
Bought SuperSU Pro and BusyBox Pro
Been using it for many months without issue
Went to options in SuperSU Pro to install itself as a system app
Tablet rebooted, but now only shows Asus logo without spinning dots and hangs
This is what I've tried so far:
------------------------------
Rebooted to recovery with Power button + Volume Down button
Showed the following:
Android cardhu-user bootloader <1.00 e> released by "US_epad-10.6.1.31-20130823" A03
key driver not found.. Booting OS
Starting Fastboot USB download protocol
It then has the usual 3 choices: RCK, Android, Wipe Data
I chose Wipe Data with Volume Up button
Then showed:
Please wait a few minutes..
Booting Recovery kernel image
Signature match.
Are you sure to wipe your user data?
Press <VOL_DOWN> to cancel,
Press <VOL_UP> to continue.
I pressed Volume Up button
Then showed the android with spinning hexagon-type cube in stomach
After about 5 seconds, it went back to Asus logo without spinning dots
------------------------------
------------------------------
After rebooting to recovery, I chose the Android option with Volume Up button
It showed:
Cold-booting Linux
Signature match.
Then it hangs
------------------------------
------------------------------
On my laptop, I downloaded latest firmware file for my Asus Memo Pad Smart 10 (ME301T), US_epaduser_10_6_1_31_UpdateLauncher.zip
Unzipped it to reveal US_epad-user-10.6.1.31.zip
Placed US_epad-user-10.6.1.31.zip onto MicroSD card and inserted into tablet
After rebooting, I chose the RCK option with Volume Up button
Rebooted with Power button + Volume Down button
Chose RCK with Volume Up
It showed:
Booting Recovery kernel image
Signature match.
Then showed dead android with red triangle with exclamation point
------------------------------
I can't get to the tablet with ADB because it no longer recognizes the device.
Can anyone help me flash the firmware?
Click to expand...
Click to collapse
nice job
Hi folks!
Does anybody still keep in depth of HDD (tape archives, possibly? %) ) firmware less than or equal US_epad-user-10.6.1.29.zip?
Found last week ME301T with US 10.6.1.31, registered at ASUS, but have no luck with unlocking bootloader - network error...
MitMProxy+rooted+root certs from cacerts.org does this own, but no luck with unlocking bootloader...
mr.kolucci said:
Hi folks!
Does anybody still keep in depth of HDD (tape archives, possibly? %) ) firmware less than or equal US_epad-user-10.6.1.29.zip?
Found last week ME301T with US 10.6.1.31, registered at ASUS, but have no luck with unlocking bootloader - network error...
MitMProxy+rooted+root certs from cacerts.org does this own, but no luck with unlocking bootloader...
Click to expand...
Click to collapse
Hi I am on the same boat. Let me know if you have an idea.
With Android 4.2. and bloatware this Tab is unusable
Related
I have TnT Lite 4.4.0 on my tablet now and it is working fine with no issues. I want to install the new honeycomb OS on my tablet but I can not get into recovery mode.
I get the "Recovery Key Detected" in the upper left corner of the screen while the VS Birds logo is on the screen then it got to the next screen w/ gtablet logo, then a black screen loads with a box and status bar, then NOTHING it resets.
Any ideas?
Here are two ideas to consider:
1) are you trying to enter recovery from a powered off state? And are you sure you are holding the volume Plus key and pressing power? When i first got the g tab, I was messed up by the volume Plus and minus keys.
2) while fully booted into your ROM, can you connect to the tablet with ADB? if so, you can use the "adb reboot recovery" command.
Hope this helps.
djab67
(If I have helped, please hit the "Thanks" button)
[GUIDE] Restore G Tablet after a Failed Recovery Mode "update.zip"
Hi, a friend gave me his mediapad x1 7D-501u, coz he had forgot the password and bought the Nexus 7.
I cant seem to reset the mediapad to its factory settings though!! I tried booting into the bootloader, but when I press the volume down + power for 10 seconds, the tab just starts normally, but now it says "Safe Mode" near the lockscreen.
Is there anyway I can reset this tab for use ? Also, I tried vol Up+ vol Down + power, but it boots into an an update loop and then tries to update and says that no file was found in the SD card. Then a big Red "FAIL" comes on the screen, and it says "please press the power button for 10 seconds to restart"
Please can anyone help on this ??
TarunN5 said:
Hi, a friend gave me his mediapad x1 7D-501u, coz he had forgot the password and bought the Nexus 7.
I cant seem to reset the mediapad to its factory settings though!! I tried booting into the bootloader, but when I press the volume down + power for 10 seconds, the tab just starts normally, but now it says "Safe Mode" near the lockscreen.
Is there anyway I can reset this tab for use ? Also, I tried vol Up+ vol Down + power, but it boots into an an update loop and then tries to update and says that no file was found in the SD card. Then a big Red "FAIL" comes on the screen, and it says "please press the power button for 10 seconds to restart"
Please can anyone help on this ??
Click to expand...
Click to collapse
Is there any reason you can't just do a "Factory data reset" from the "Backup & reset" setting?
Its password locked
Easiest way is to download an official full ROM (not an update), follow the instructions on how to put it on an SD card and start the X1 with volume+&- and power.
Try Volume Up + Power. Worked for me.
Hold the Volume Up Connect the charge cable into the tablet.Wait until you get into recovery
I installed the new update and it installed it and it booted up and it was stuck on my carrier's screen
I hardbooted it and now it's stuck on the lg screen.
Help me please
N33dhelp said:
I installed the new update and it installed it and it booted up and it was stuck on my carrier's screen
I hardbooted it and now it's stuck on the lg screen.
Help me please
Click to expand...
Click to collapse
Hello, N33dhelp.
Have you tried using the phone's current factory reset (will destroy all data on the phone; Pictures, programs, files, etc)?
You can initiate it with the phone itself. Press and hold the VOLUME DOWN key and POWER key. When the boot-up logo appears: Temporarily release the POWER key and re-press and hold it (do not release VOLUME DOWN key).
The "FACTORY RESET" screen should appear shortly (the phone should NOT reboot; If it does: It did not work). You can release all keys.
The volume keys select menu items. The power button becomes an 'OK' or 'SELECT' button for what is highlighted (selected).
I just wrote this short guide on using LG UP to flash your phone to a factory reset state (using your PC).
If you're unable to factory-reset your device: You could consider flashing the phone: https://forum.xda-developers.com/lg-k7/how-to/guide-factory-stock-flash-t3722424
I hope this helps!
Hello, Gents.
My fat fingers inadvertently ticked a package in BK package disabler which led to the device freezing instantaneously (yes, I know, I suck). it was a system package which I failed to write down. anyway, the volume down+ power button trick does not work for me since I can't turn the device off - I go through the screens where the V30+ model page shows up then the LG logo follows; releasing the power button and pressing it after 2 seconds just restarts the process.
can anyone help me with the adb command to entry the dialog screen for the data wipe?
adb reboot recovery just gives me the robot with a message "no command" at the bottom.
adb recovery --wipe_data does thing.
TIA.
Hold down power and vol down for 8 seconds, phone will shut down and then reboot
release both buttons as soon as the screen goes off
after half a second hold both again
as soon as the lg v30 logo appears, release the power button and then hold it again (while doing this continue to hold the vol down button)
you need to get the timing right, but that will boot the v30 (you can also check videos on youtube for the g6 for example) into the factory reset screen, which will boot recovery (if you select twice yes) and perform a factory reset
Hello! i don't know how but my rooted Mi A3 last night decided on its own to update to Android 10. So i woke up with all of mine Magisk magic all gone. I tried to root again but my phone is stuck on the 'Mi' boot screen.
So here's the situation:
if i press volume up + power button, instead of entering recovery mode the "no Command" screen shows up;
if i try to fastboot, my pc doesn't recognize anymore my device;
There is any another way to enter recovery mode? Can i flash a boot image on a sd card? Do i have to throw away my beloved xiaomi?
You have most probably incompatible Magisk module which prevents phone from booting Android 10. Flash stock boot image to get phone working (fastboot should work, double check your drivers etc.).
Or perform factory reset from stock recovery:
"If presented with an image of a broken Android with "No Command" shown on the screen, do the following:
- Press and hold the Power button.
- While holding the Power button press the Volume Up button then release the Volume Up button then the Power button."