hi
in the top right corner of my white LTE xperia z4 tablet the frame before the corner is a bit higher than thefram in the corner itself, as you can see in the image, is it the same with yours too?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thank you very much
I have a black LTE tablet and the bumpers on the corners are flush on my device.
Sent from my SGP771 using Tapatalk
uv101 said:
hi
in the top right corner of my white LTE xperia z4 tablet the frame before the corner is a bit higher than thefram in the corner itself, as you can see in the image, is it the same with yours too?
thank you very much
Click to expand...
Click to collapse
Mine is like yours too although not that pronounced. And dude, you are super observant!
najoor said:
Mine is like yours too although not that pronounced. And dude, you are super observant!
Click to expand...
Click to collapse
i think the correct word is obseesive
by the way, i found that tiny black scratch on the bottom of my tablet' it's so tiny but it is driving me crazy
the tablet is upside down inthe picture' this is the bottom frame
does any of you have something similar on you tablet?
thank you
uv101 said:
i think the correct word is obseesive
by the way, i found that tiny black scratch on the bottom of my tablet' it's so tiny but it is driving me crazy
the tablet is upside down inthe picture' this is the bottom frame
does any of you have something similar on you tablet?
thank you
Click to expand...
Click to collapse
Not to be negative, but is it possible that your tablet is counterfeit? Can you confirm the serial number with Sony? Or perhaps dunk it in water to see if it's watertight?
DaddyWhale said:
Not to be negative, but is it possible that your tablet is counterfeit? Can you confirm the serial number with Sony? Or perhaps dunk it in water to see if it's watertight?
Click to expand...
Click to collapse
i logged in with my google account to sony my tablet appeared in the suppot page, compared the imei to both the one in the dialer and in the settings and they are the same, i gues that means it's fine
uv101 said:
i logged in with my google account to sony my tablet appeared in the suppot page, compared the imei to both the one in the dialer and in the settings and they are the same, i gues that means it's fine
Click to expand...
Click to collapse
Very glad to hear that, uv101. I live in the US and am getting my Z4 tablet tomorrow. Bought it on ebay and am a bit paranoid about getting a fake one, which is why I brought it up as a possibility.
DaddyWhale said:
Very glad to hear that, uv101. I live in the US and am getting my Z4 tablet tomorrow. Bought it on ebay and am a bit paranoid about getting a fake one, which is why I brought it up as a possibility.
Click to expand...
Click to collapse
well' i live in israel so my only option to buy it was through an israely retail who imports in from china, as part of the import process they are forced buy the state to open the box and replace the wall plug with an israeli one,so i got and open box with a SAMSUNG wall plug, i also suspect thaqt they turned on the device and installed some localiztion and warranty software on it
anyway of you find on your tablet one of the two things i stated before' please tell me, thank you
Anybody else?
I can kinda see the corner of mine there like that too, but I don't think it's much to worry about. If you're really worried about the tablet being counterfit, run AnTuTu and see how the score matches up. If it's counterfit, it obviously won't be a Snapdragon 810.
Though, I really don't like how my tablet creaks a little when I squeeze the back. Does that happen for anyone else?
King Cole said:
I can kinda see the corner of mine there like that too, but I don't think it's much to worry about. If you're really worried about the tablet being counterfit, run AnTuTu and see how the score matches up. If it's counterfit, it obviously won't be a Snapdragon 810.
Though, I really don't like how my tablet creaks a little when I squeeze the back. Does that happen for anyone else?
Click to expand...
Click to collapse
creaking is normal, because it's plastic, i didn't get to test mine yet, but my gs4 was creaking, but after some time i didn't touch that area it somehow stopped and my ps vita also creaks.
by the wa' do you have that scratch at the bottom of the device as shown in the picture i posted here?
Well, mine is black, so.. I probably couldn't see it all too well even if it was there, but no, I don't see anything down there. If it really bothers you so much, ask for a replacement from whomever you bought it from. I'd doubt they'd deny you.
Thank you
By the way, my tablet does creak
Related
On the G1 you get no flash so how can you add or convert or accessories for getting flash?
use a torch.
mod your phone so that it will fit an led> solder the led connections to the power source of the g1> rewrite camera code to whenevr u push the camera button the light will come on.
IDK if this is possible but i am sure it is
I did some very intense research, and here is what I came up with.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SolemnWishing said:
I did some very intense research, and here is what I came up with.
Click to expand...
Click to collapse
I nearly soiled myself when I saw this post.....
SolemnWishing said:
I did some very intense research, and here is what I came up with.
Click to expand...
Click to collapse
lmao! now that is funny!
LOL that's hawt.
how much does a mod like that cost?!!!
i think i peed a little.
kvizz said:
LOL that's hawt.
how much does a mod like that cost?!!!
i think i peed a little.
Click to expand...
Click to collapse
well considering that the new camera mod is nikon brand...hmmm i say it be in the hundreds =X
seriously guys.... guys, SERIOUSLY...
BIG
ASS
CLOCK
rofl.
i think it says
BIG
ASS
CHAIN
dawg.
http://www.cmt.com/videos/shows/cmt-music-awards-2009/401599/thug-story.jhtml
http://www.youtube.com/watch?v=Umu1eYa_1MA&feature=related
joke all you want but it was done ages ago....
Freedomcaller said:
http://www.youtube.com/watch?v=Umu1eYa_1MA&feature=related
joke all you want but it was done ages ago....
Click to expand...
Click to collapse
Well, there is our proof of concept... now who wants to be the first to crack open their phone?
SolemnWishing said:
I did some very intense research, and here is what I came up with.
Click to expand...
Click to collapse
when this hit the store,its just what i been looking for wow..lol
SolemnWishing said:
I did some very intense research, and here is what I came up with.
Click to expand...
Click to collapse
LOL this made my day, love the "very intense research part". But back to the point it is definitely possible but do you want to go trough the hassle of doing it?
Freedomcaller said:
http://www.youtube.com/watch?v=Umu1eYa_1MA&feature=related
joke all you want but it was done ages ago....
Click to expand...
Click to collapse
Interestingly enough, I looked into that. The "rear flash pack" the guy is talking about doesnt exist. The static image at the beginning of the phone with the back off is PHOTOSHOPPED to show an LCD on there. Yay, he touched an app on the screen that "turned on the lcd"! I could disassemble an lcd flashlight and tape the contact point, battery and lcd to the back of my phone and duplicate this video. I could even put an icon on my desktop to press too, just to make it look nifty! Notice how nowhere in the video does he show the back of the phone ON video in good light.
Oh, and very interesting that people have been asking the guy for the link for his "rear flash pack" for almost a year and hes given 0 responses.
Theres no proof of concept there. You know how ridiculous a mod like that would be? Not only would you have to have the knowledge of the circuitboards to solder the lcd leads on, but you would also have to know android well enough to know how to activate those specific contact points. Hell, we cant even figure out how to crack the rogers coding yet, what makes you think that someone out there figured all this out?
EDIT: Heres proof:
This is the "picture" from said video.
Increase the image to biggest size and notice the following:
-The LCD holes arent round.
-The LCD holes are PIXELATED
-The LCD holes are drilled right through a flimsy metal clip under the battery door. Look at it on YOUR phone and tell me how thats possible without the clip breaking into pieces and falling off.
-the rim of the LCD holes has obviously had the burn tool in photoshop applied to it (notice how its darker around the edges than any other part of the phone.
Oh, and the coup de grace: THE PICTURE IS AN UNBOXING PHOTO FROM THE PHONE'S RELEASE LAST SEPTEMBER. You can see the G1 box and all of the box contents on the floor right under the phone!
Well.. that brings us back to square one, ill bust out my nikon as soon as I get my phone up and running again, ran into some minor (i mean major) technical difficulties.
kusotare said:
...
...
EDIT: Heres proof:
This is the "picture" from said video.
Increase the image to biggest size and notice the following:
-The LCD holes arent round.
-The LCD holes are PIXELATED
-The LCD holes are drilled right through a flimsy metal clip under the battery door. Look at it on YOUR phone and tell me how thats possible without the clip breaking into pieces and falling off.
-the rim of the LCD holes has obviously had the burn tool in photoshop applied to it (notice how its darker around the edges than any other part of the phone.
Oh, and the coup de grace: THE PICTURE IS AN UNBOXING PHOTO FROM THE PHONE'S RELEASE LAST SEPTEMBER. You can see the G1 box and all of the box contents on the floor right under the phone!
Click to expand...
Click to collapse
I think the "flimsy metal clip" is the G1's phone antenna, lol NOT something you'd want to damage
Actual Solution-Kinda!
Try this!
http://phonephlash.com/store/index.html
Or this!
http://www.greenbulb.com/products/fcube.htm
andrew richardson said:
Try this!
http://phonephlash.com/store/index.html
Or this!
http://www.greenbulb.com/products/fcube.htm
Click to expand...
Click to collapse
Hmm... a stick on led flashlight or a blinking led flashlight decisions decisions.
I have no idea how this happened 5 minutes ago I was playing draw something on the tablet then I closed it did a few things and when I come back to it I have a large horizontal line going across the screen and a small ink splotch on the bottom of the horizontal line. I can't take a screen shot of it. The picture comes out fine. Can someone plz tell me if this is a hardware or software issue and how to handle it. I bought the prime in Feb so I don't know if I'm under warranty or not. Plz help this is extremely upsetting.
yoursexyhero said:
I have no idea how this happened 5 minutes ago I was playing draw something on the tablet then I closed it did a few things and when I come back to it I have a large horizontal line going across the screen and a small ink splotch on the bottom of the horizontal line. I can't take a screen shot of it. The picture comes out fine. Can someone plz tell me if this is a hardware or software issue and how to handle it. I bought the prime in Feb so I don't know if I'm under warranty or not. Plz help this is extremely upsetting.
Click to expand...
Click to collapse
If you reboot and the problem is there during the splash screen, then I'd say hardware.
Sent from my HTC Desire using XDA
I guess its hardware but how could this happen maybe too ,much pressure in that area? How much/little pressure could cause this. Its even in a roocase. Will Asus fix it if I complain about this with GPS issues?
yoursexyhero said:
I have no idea how this happened 5 minutes ago I was playing draw something on the tablet then I closed it did a few things and when I come back to it I have a large horizontal line going across the screen and a small ink splotch on the bottom of the horizontal line. I can't take a screen shot of it. The picture comes out fine. Can someone plz tell me if this is a hardware or software issue and how to handle it. I bought the prime in Feb so I don't know if I'm under warranty or not. Plz help this is extremely upsetting.
Click to expand...
Click to collapse
Like this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That was mine on starting it for the first time. Had to RMA to replace the screen.
leppie said:
Like this?
That was mine on starting it for the first time. Had to RMA to replace the screen.
Click to expand...
Click to collapse
Not sure if its just my net but I can't see the pic
yoursexyhero said:
Not sure if its just my net but I can't see the pic
Click to expand...
Click to collapse
Not sure, it's a pic from this thread.
yoursexyhero said:
I can't take a screen shot of it. The picture comes out fine.
Click to expand...
Click to collapse
You used your Prime to take a screenshot and were surprised that the crack in the glass didn't show up in the image?
Just... lol
hmm sounds like mine was
i had to send mine in for repair.. i opened it up one day i have the keyboard dock..on the top part of screen when in landscape there was a line accross the top, it was all dotted as if water or almost a mold spore look to it..but only showed up when grey color or grey screen was on..they replaced the screen and repaired it free of charge for me...
Mubble said:
You used your Prime to take a screenshot and were surprised that the crack in the glass didn't show up in the image?
Just... lol
Click to expand...
Click to collapse
The screen physically is fine. No "cracks" on the outside so I wasn't sure if it was on the internal or software
Has anyone noticed that the bottom edge of your DNA has a slight 1-2mm shadowy area where the backlight is dim as well as random areas along the sides (this is not the capacitive light bleed which most units all have, which I don't consider a big deal)? I've had numerous replacements and all have exhibited these issues including a few Verizon store units. I find it surprising that this hasn't been reported upon in any reviews. It's fairly annoying on white and light colors, the majority of what I use the phone for (side-by-side with my 4s, the 4s has even lighting to the edges). I also checked out the HTC One in an AT&T store and couldn't see these issues, so it looks DNA rather than HTC specific.
It's a bit hard to make out from pictures, but it is visible.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is a more obvious example along the side:
I guess I'm one of the few who is bothered by stuff like this. Otherwise, this phone is sick.
Infinite Jest said:
I guess I'm one of the few who is bothered by stuff like this. Otherwise, this phone is sick.
Click to expand...
Click to collapse
No, your one of the few whose phone has that issue.
Sent from my HTC6435LVW using xda app-developers app
Bigandrewgold said:
No, your one of the few whose phone has that issue.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
I've literally had 10 replacements with the same issues.
Infinite Jest said:
I've literally had 10 replacements with the same issues.
Click to expand...
Click to collapse
that sucks you must be getting bad batches. Here's a pic of mine attached below, also I am extremely near sighted to the point where i can see the pixels on this phone no problem taking off my glasses and getting close. I can not find on a white background any light lvl differences. Id try another store to get your next replacement from or something.
reaverclan said:
that sucks you must be getting bad batches. Here's a pic of mine attached below, also I am extremely near sighted to the point where i can see the pixels on this phone no problem taking off my glasses and getting close. I can not find on a white background any light lvl differences. Id try another store to get your next replacement from or something.
Click to expand...
Click to collapse
If the top of that pick is the bottom of the phone, then I can see the dim area, but you're right about the sides looking uniform. I wonder if the refurbishment process introduces issues along the long sides.
yeah they all have it dude. most people just don't see stuff like us lol i know exactly w hat you mean but it doesn't bother me..
now how about this...turn your phone at an angle and look straight down to the top, and notice on the left and right of the verizon logo these 2 black squarish looking spots? lol
Infinite Jest said:
If the top of that pick is the bottom of the phone, then I can see the dim area, but you're right about the sides looking uniform. I wonder if the refurbishment process introduces issues along the long sides.
Click to expand...
Click to collapse
That is the top not the bottom you can see on the bottom where the camera picks up the buttons light bleed.
jayochs said:
yeah they all have it dude. most people just don't see stuff like us lol i know exactly w hat you mean but it doesn't bother me..
now how about this...turn your phone at an angle and look straight down to the top, and notice on the left and right of the verizon logo these 2 black squarish looking spots? lol
Click to expand...
Click to collapse
that's probably the foam between the screen and buttons lol.
jayochs said:
yeah they all have it dude. most people just don't see stuff like us lol i know exactly w hat you mean but it doesn't bother me..
now how about this...turn your phone at an angle and look straight down to the top, and notice on the left and right of the verizon logo these 2 black squarish looking spots? lol
Click to expand...
Click to collapse
Yeah, man; it's a curse. I'm one of those who notices the digitizer when the display is on as well.
Because of those lights, I think the top 1/8 of the screen is a bit brighter than the rest as well, especial if you're viewing in landscape. If you do the same on the bottom, you see nothing, like they didn't put any LEDs there. The inconsistency I've noticed along the sides isn't the exact same between any two phones (I've had a number of replacements mostly due to other issues). I bothers me pretty much any time I use the browser, maps app, texting, or anything like that, but I think i'm slowly getting used to it. From what I can tell of hands on time with the HTC One, it looks like they've mostly avoided this in that model, if not because of a larger bezel to hide the diffuser/LEDs in.
Thought I would post this as I just brought one..
My Screen died yet again. after only having it in for service about March. Mind you it was here in Asus China.. so...
Anyway, It was giving me the dreaded black screen no turn on type thing, Plus a few of the other characteristics that have been documented in the Katkiss thread of late- Corrupted partition.
After the last battle with it, I ended up with a full strip on the left hand side about 50mm that is unresponsive.. nothing that you can do on the touch side of things, but mouse still works. Anyway.. wasn't going to send it back. as its not worth the aggravation of dealing with the idiots at the Asus aftersales service. So went and brought the Nexus 10.. Loving it..
but for project decided to look for another LCD screen and came across this seller with the full frame for sale.. so its about $US65.. so its my weekend project.. as Dam.. with Katkiss JB4.3 around.. I just want to play with it on the TF101.. Just not ready to let this thing die as yet.
I will update the post once i get it up and running.
http://item.taobao.com/item.htm?spm=a230r.1.14.288.E5qF2L&id=20842680877&_u=6n4kj1c3dd2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Good luck, looking forward to seeing how you get on
*Detection* said:
Good luck, looking forward to seeing how you get on
Click to expand...
Click to collapse
Well, its back up and running..not with out a few tense moments..
The picture you see is NOT what you get..as no frame..they **** you on that..
Which I found out to my detriment.. As I order the full set thinking that I wasn't going to have screw around with the glue thing..
it turned out it turned up and I was...what the...
Click to expand...
Click to collapse
As I had ready been watching videos so kinda knew what to do..
Anyway as it comes glued already..how the .... Are you suppose to screw the LCD panel in..
Derrrrrrr...can't unless you do some strange but thing..and or bend the brackets around..
Click to expand...
Click to collapse
Anyway..
Not to be deterred.. I got out the trusted plastic tools and went about separation of the screen from the LCD panel...new one...as I already had got the old one off with no drama..and cleanly.
Note..make sure you know which you are separating..as I found out the hard way that I was actually separating the gorilla glass from the touch screen...were wondering why it was so dam hard...plus one hell of a mess..
Lucky the original was still in good order so I finally was able to separate the new LCD panel and clean it up..
I almost gave up..but pushed through..it wasn't going to beat me.. plenty of man handling going on..I put it all back together...yeha..
Mind you I wasn't thinking that it was going to crank up as I was man handling the LCD panel pretty heavily ...but up popped Tims little mascot and 4.2.2 fired right up...sign of relief..
So straight to 4.3 I have came and its powering along...too good to be true..
Thanks Tim...and others that have ported the 4.3..
Of course I have a few more creaks from around the edges And a little light bleed on the left hand side but as I was lucky that the double sided tap from the original glass was still sticky and usable..
Will let it settle in and put it thru its passes and see how it goes before I pull it apart and pop some silicon in there..
Click to expand...
Click to collapse
Will edit post later with the YouTube links used.
If you do it, the Russian video is the best to use to strip it down but there are a few little steps it miss's
Thus the other two come in handy.
Sent from my Transformer TF101 using Tapatalk 4
Where did you find the full frame with the LCD for $65? I currently have the same problem with my tf101. And would love to replace it. Right now its just a paper weight.
Disregard, I got all excited a quick Google search lead me to one on amazon. Thank you for the tutorial I will follow once mine gets in and I'll report back!
Sent from my XT912 using Tapatalk 4
Custom and Stock Grills for the Axon 7
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Replacement grills for the Axon 7. If yours break or you just want to try another design, you can use these!
If you want a specific design, you can tell me and i'll do my best.
These models are UNTESTED - We don't know if they are the right size yet. Please print one and tell me where I need to refine the model!
They might be a few tenths of a millimeter off, but not more than that. my main worry is if the height is right - if someone can test and measure, i'd appreciate it (and fix it if needed)!
The grills are in .STL format, tolerances 0.05mm (You can open them with Win10's 3d file viewer)
View attachment 4432017 DO NOT USE
Calling @kitcostantino @alvinlwh @kountry83 @chrisrodsa210 to the new thread
edit, double-post
Wow, wish I had a printer. I would love these in glossy black.
Sent from my ZTE A2017U using XDA Labs
those are sick i really like the single line one
@Choose an username... I'm gonna try to see what I can do with my setup.
Thank you
Are all these holes needed? I mean the speakers are not this "long" right?
A black one with cutouts only where its necessary would be awesome.
In wish i had a printer :/
With a standard 0.4mm nozzle, the model with all the holes will not be printable on an FDM machine. Maybe with an 0.2mm nozzle but I think the holes will still cause problems.
Spillunke said:
Are all these holes needed? I mean the speakers are not this "long" right?
A black one with cutouts only where its necessary would be awesome.
In wish i had a printer :/
Click to expand...
Click to collapse
The problem is that the top speaker is in the middle and the bottom speaker is on the lower right corner. So it would be really weird
eMadman said:
With a standard 0.4mm nozzle, the model with all the holes will not be printable on an FDM machine. Maybe with an 0.2mm nozzle but I think the holes will still cause problems.
Click to expand...
Click to collapse
As long as the outermost shape is okay, just with having the holes as rough marks to drill them later is enough. That's why I want someone to print and test them, so that I can improve the design until it can be printed and sanded as little as possible.
These models are based on a 1200dpi scan of the grills. They might be smaller or bigger, or the camera hole might be slightly off-center.
Choose an username... said:
The problem is that the top speaker is in the middle and the bottom speaker is on the lower right corner. So it would be really weird
Click to expand...
Click to collapse
Yeah i saw the positions in a teardown video. I wouldnt have a problem with that.
Spillunke said:
Yeah i saw the positions in a teardown video. I wouldnt have a problem with that.
Click to expand...
Click to collapse
well, as long as you could print it, just send me a sketch with how you want it to look and i'll make it
Choose an username... said:
well, as long as you could print it, just send me a sketch with how you want it to look and i'll make it
Click to expand...
Click to collapse
I cant i have no 3d printer and dont know anything about these sketches. I wish i could!
Maybe there is someone who also like my idea and has a printer. I would buy these
Spillunke said:
I cant i have no 3d printer and dont know anything about these sketches. I wish i could!
Maybe there is someone who also like my idea and has a printer. I would buy these
Click to expand...
Click to collapse
I mean get a piece of paper and write down your idea. I make the models.
You can send stuff to print and then pay for it. I don't know how expensive that would be but it's known to be a common thing, since people can make custom things like Rubik cubes and get them all printed and ready to assemble. Since these pieces are tiny I guess it wouldn't be very expensive. But I have to test them first and see if the size is right or not
i wish those speakers in black,is there any video that show how the remove/replace the speaker grills?
scale is bad....
they are less than 10mm.... really tiny
scale it and quote me, I print it. is a few minutes to do it
Just wow! Love the Idea and it could be awesome to use black Ones with bigger Diamond shaped holes... Wish i could Print some, but i would also mind buying a pair of them...
Black Grills with Black Panel... Mhhhhhh
pelelademadera said:
scale is bad....
they are less than 10mm.... really tiny
scale it and quote me, I print it. is a few minutes to do it
Click to expand...
Click to collapse
I don't know why that could've happened, bur I don't know how to scale them. My .par files are on scale, around 70 mm long. I'll see how I can save them to retain the size, but it's weird
Miustone said:
Just wow! Love the Idea and it could be awesome to use black Ones with bigger Diamond shaped holes... Wish i could Print some, but i would also mind buying a pair of them...
Black Grills with Black Panel... Mhhhhhh
Click to expand...
Click to collapse
Well there are services where you send the file and they print the grills for you and send them... You're on Brazil, right?
pelelademadera said:
scale is bad....
they are less than 10mm.... really tiny
scale it and quote me, I print it. is a few minutes to do it
Click to expand...
Click to collapse
you're right, just checked and they look like 4 mm long... @kitcostantino don't try anything else, not your fault or the printer's ? let me get the files ready