Anybody know how to recover from fastboot and rescuemode ?
Davinci50 said:
Anybody know how to recover from fastboot and rescuemode ?
Click to expand...
Click to collapse
There is a post from I think Xordos on that in development..
---------- Post added at 04:11 PM ---------- Previous post was at 04:09 PM ----------
http://forum.xda-developers.com/asc...to-fix-soft-bricked-phone-using-twrp-t2886630
my huawei G630-U10 phone is under fast boot and rescue mode with recommendation of "please connect the Usb cable to your computer and open Hisuite". However, when I opened the Hisuite on my computer it dsiplays as the phone is not connected to the computer. What is the solution for this .
This is for ascend mate 2.
i have the same problem with ascend g630 u10 plsss guys any suggestions
Related
My SD card is affected by virus and when i tried to get it rid off
i formatted everything in recovery mode..
So, my phone is not booting now, no recovery, no fastboot, not even charging
any ideas for recovering it would be appreciated...
when i try to flash it withflashtool s1 boottool driver is not installing (says mobile is not connected, even when it is connected) any ideas
Try installing flashmode drivers from flashtool / drivers
Sent from my ST25i using Tapatalk 2
---------- Post added at 02:06 PM ---------- Previous post was at 02:04 PM ----------
Also install fastboot drivers
Sent from my ST25i using Tapatalk 2
thanks mate i got it booted
Hi everyone,
I bought Lenovo A806 from china and wanted to clear the android so I flashed bootloader. After flashing with SP flash tool, phone cannot start.
If I connect it to PC with or without battery, it looks like PC find some device, but in about 30 seconds, it disconnect it and connect again. If I try to flash again, SP tool cannot find the phone.
I don't want to send it to china again, so if someone have any idea, it would be very helpful.
Thank you and Merry Christmas
format again with manual option don't use auto.
same issue
Martasdx said:
Hi everyone,
I bought Lenovo A806 from china and wanted to clear the android so I flashed bootloader. After flashing with SP flash tool, phone cannot start.
If I connect it to PC with or without battery, it looks like PC find some device, but in about 30 seconds, it disconnect it and connect again. If I try to flash again, SP tool cannot find the phone.
I don't want to send it to china again, so if someone have any idea, it would be very helpful.
Thank you and Merry Christmas
Click to expand...
Click to collapse
Same problem here with my phone, you got any solution?
please tell me if you fixed it
---------- Post added at 12:53 AM ---------- Previous post was at 12:46 AM ----------
abgnokia said:
format again with manual option don't use auto.
Click to expand...
Click to collapse
can you elaborate, about addresses ?
I fix it. Try to connect your phone without battery. It will connect with proper drivers (ADB) and you are able to flash bootloader and ROM.
Hey there I'm having the same problem - every time I run flash tool hit download and connect the phone, nothing happens.
I've tried connecting without battery but doesn't seem to make a difference. When phone is on I can connect the phone and is recognised fine but when I turn it off and connect I can hear it connect and then disconnect after 20sec approx.
Please could you give step by step how you got this to work plzzzzzzzz
Thanks
Martasdx said:
I fix it. Try to connect your phone without battery. It will connect with proper drivers (ADB) and you are able to flash bootloader and ROM.
Click to expand...
Click to collapse
Can you share bootloader file for Lenovo A806. Thanks
You can download it here: http://www.needrom.com/download/vibe-ui-2-0-1508-st-multilanguage-deodex/ or browse roms or bootloaders in parent folder.
Step without battery is simple:
unplug phone from PC
install PC drivers
remove battery
connect with USB to PC
After that you should heart sound indication your phone was recognized by PC and You can install bootloader
link of file for Lenovo A806. Thanks
Can you share bootloader and driver file for Lenovo A806. Thanks
Same here..Encounter bootloop after flash official Fw from needrom after search for tutorial..Now stuck on boot with TOOL DL Image fail...Anyone can help??
---------- Post added at 11:10 PM ---------- Previous post was at 10:53 PM ----------
feez909 said:
Same here..Encounter bootloop after flash official Fw from needrom after search for tutorial..Now stuck on boot with TOOL DL Image fail...Anyone can help??
Click to expand...
Click to collapse
Hi..Problem solve..
I try use SP Flash tool 5.14 instead of 5.16.
Found preloader solve.Now able to boot to ROM.Thanks
Hi there, I after trying to flash twrp to my a806 I got stuck with TOOL DL Image fail. I tried sp v5.14,5.16 and 3.something.
Nothing seems to work. Any suggestions.
Sent from my 620G using Tapatalk
Hello. So after going into download mode and plugging my G3 into my computer via usb, i got to a screen saying 'firmware update... Do not unplug the USB connection until the process is complete'. For about thirty minutes i've been stuck at 0% and am worried that i may have messed up my phone. How do i fix this??
Via tot or kdz. I did a YouTube search on how to do it on the LG g2. It is the same software and procedure as l3 with different files of course so you can can accustomed to the steps and procesd
---------- Post added at 04:15 AM ---------- Previous post was at 04:11 AM ----------
Steps and procedures
i was trying to flash twrp on my lg g3 vs985 and i dnt know what happened screen is now black but when i hold the volume up button and connect the usb i hear it connect and the device manager / port ( con/lpt) it comes up as lge androidnet for vzw usb serial port. please tell me whats happening anf how can i fix it....no recovery and no download mode:crying::crying::crying:
help i have same problem
---------- Post added at 03:08 PM ---------- Previous post was at 03:08 PM ----------
please anybody forgodsake
My computer cannot recognize my i8552 device in fastboot mode(download mode). I have install several times samsung usb driver but still the same. But I want to flash twrp, any ideas? driver error code 10
Jason_20 said:
My computer cannot recognize my i8552 device in fastboot mode(download mode). I have install several times samsung usb driver but still the same. But I want to flash twrp, any ideas? driver error code 10
Click to expand...
Click to collapse
root ur device with kingroot
use rasher app with flash recovery.img via phone storage
if fail then
unlock developer option by tap 10 times on build number in about device
turn on usb debugging in developer option
use pda.net for pc or minimal adb pc
for force install driver on pc
rony raj said:
root ur device with kingroot
use rasher app with flash recovery.img via phone storage
if fail then
unlock developer option by tap 10 times on build number in about device
turn on usb debugging in developer option
use pda.net for pc or minimal adb pc
for force install driver on pc
Click to expand...
Click to collapse
I am also facing the same problem. I waana install Stock again. I tried Minimal ABD, it connects when phone it is ON, but in download mode it says no device connected....
nfs2014 said:
I am also facing the same problem. I waana install Stock again. I tried Minimal ABD, it connects when phone it is ON, but in download mode it says no device connected....
Click to expand...
Click to collapse
minimal adb not detect device in download mode
only odin with samsung driver and samsung kies auto
run both to connect in odin in download mode
I fixed the problem. If you want to know the solution, you can P. M. me.
Jason_20 said:
I fixed the problem. If you want to know the solution, you can P. M. me.
Click to expand...
Click to collapse
how didi u fix this issue
---------- Post added at 11:44 PM ---------- Previous post was at 11:43 PM ----------
how didi u solved it??
vaisakmct said:
how didi u fix this issue
---------- Post added at 11:44 PM ---------- Previous post was at 11:43 PM ----------
how didi u solved it??
Click to expand...
Click to collapse
I just use a proper way to enter fastboot mode instead of using shortcut way (by command).