Hello
I am new to both this forum and rooting and I hope that I am writing a thread on the right place. I've been trying to install 2.3.4 gingerbread on my Alcatel One Touch 990, following this tutorial from this forum. After installing the batch file from Pack 2 (install.bat) , my phone got stucked into bootloop. (I would post the link of tutorial but the forum blocks me :/ ).
I can't access recovery neither clockwork mode. Whenever I try to do anything with power button, the phone gets into boot loop. I am not sure but I think that usb debugging is turned on.
Can anybody help me out?
Thank you.
josip95 said:
Hello
I am new to both this forum and rooting and I hope that I am writing a thread on the right place. I've been trying to install 2.3.4 gingerbread on my Alcatel One Touch 990, following this tutorial from this forum. After installing the batch file from Pack 2 (install.bat) , my phone got stucked into bootloop. (I would post the link of tutorial but the forum blocks me :/ ).
I can't access recovery neither clockwork mode. Whenever I try to do anything with power button, the phone gets into boot loop. I am not sure but I think that usb debugging is turned on.
Can anybody help me out?
Thank you.
Click to expand...
Click to collapse
Try the fixes mentioned here:
http://forum.xda-developers.com/showthread.php?t=1597847
Evolution_Tech said:
Try the fixes mentioned here:
http://forum.xda-developers.com/showthread.php?t=1597847
Click to expand...
Click to collapse
I've been trying those already, but when I tried again, it actually worked. Thanks a lot
Related
I download the steakdroid 2.0 and try to update the room. everything was all right. but couldn't boot into the system, it stop at the steakdroid-by DJ STEVE logo. can anyboy help me ? thank you.
bronsongu said:
I download the steakdroid 2.0 and try to update the room. everything was all right. but couldn't boot into the system, it stop at the steakdroid-by DJ STEVE logo. can anyboy help me ? thank you.
Click to expand...
Click to collapse
You should try QDL tool if your stuck in the loop. After the QDL tool, root and update with either CWM or StreakMod Recovery.
QDL Tool WILL WIPE your phone completely. Search for QDL tool and make sure you have the drivers for the Qualcomm diagnostic usb hs 9002 or the QDL tool will fail. Hope this helps.
Someone here might have a better way of fixing it, so keep searching before you go anything and the carnal rule READ READ READ
Good Luck!!
I couldn't find a direct link to QDL Tool, but search the forums and google. I know what it feels like when you're stuck, so I wanted to ease the frustration by giving you direct links. Just do searches.
You need: Drivers and QDL Tool. There are two versions of the QDL Tool...get them both just in case.
o, thank you so much, I am going totry, and will post if it works.
try a factory reset
Streakdroid.com web site is missing content --"streakflash" link.
ebaul said:
I couldn't find a direct link to QDL Tool, but search the forums and google. I know what it feels like when you're stuck, so I wanted to ease the frustration by giving you direct links. Just do searches.
You need: Drivers and QDL Tool. There are two versions of the QDL Tool...get them both just in case.
Click to expand...
Click to collapse
DynamicRam said:
try a factory reset
Click to expand...
Click to collapse
What baseband are you using? You can get/verify this information by restarting while holding POWER+CAMERA and instead of clicking "Fastboot", entering
Code:
*#301#
on the number pad beneath the "Fastboot" clickable area, then entering
Code:
01
to get the Modem Version from the "Device info" produced.
What custom recovery are you using? IIRC, I had an identical problem when using ClockworkMod Recovery and got things past the boot animation after installing StreakMod recovery, which seems to be more predictable in a number of ways.
From the description provided, I think it might be premature to resort to QDL Tool to get past the point at which you're stuck.
You haven't described for how long you have waited while stuck on the boot animation. I assume that you watched it hang for at least ten minutes. It is a truism that the first boot can take quite awhile.
How many times have you rebooted and gotten stuck on the boot animation in this manner? If more than twice, then I suppose that you can expect that restarting won't help. I myself have gotten stuck at the boot animation and then upon restart found it to boot up fully to the home screen.
I'd vote first for a factory reset from the white-background Dell recovery.
As far as QDL is concerned, I think that one should use the StreakFlash version rather than the other/older version (which I can't find anyway).
For QDL, if and when you must use it: StreakDroid.com is kinda screwed up right now. Try: http://downloads.streakdroid.com/djsteve/streakflash.zip
bronsongu said:
I download the steakdroid 2.0 and try to update the room. everything was all right. but couldn't boot into the system, it stop at the steakdroid-by DJ STEVE logo. can anyboy help me ? thank you.
Click to expand...
Click to collapse
Android Development is not for Questions we have a Q&A Fora for that and this Question could have been asked in the Streakdroid thread
Moving to Q&A
i think i have bricked mine new P 7500
but there is nothing wrong i did with this device
tab is now in only conecting in APX
NVIDIA USB Boot-recovery driver for Mobile devices
no sign of charging and no light on display
is there any way to recover it back??????????
What exactly did you do? Nothing? You did try to hold the power button for 15 seconds, right?
yes exactly
when no luck in powering on
is this hard bricked on semi??
do i need Jtag for this??????
What did you try to do that caused this problem?
trying rooting
messed up with commands
so my tab is bricked ???????????????
If you really want some help from here, you'd better exactly describe (step by step) what you were doing when things went wrong. Fisrt post you say you did nothing wrong, 6th post you say you messed up commands. I would be jumpy too if my tab was bricked, but your short replies don't add to the possible solution.
a very good answer
thanks
but i have messed up with commands now
not while it was working fine
when nothing happened nothing shown on screen
then i started using commans of those rooting procedure mentioned in devlepment forum for 10.1
all i wanted to reboot it with commands
so i thought may be i have done something wrong with commands
thats why i wrote now that
messed up with commands now
only obove mentioned device is shown on my device manager
thats all happened
Ok, so we have apx mode for stock GT-P7500. I thougt that only was for that Google I/O version. But then you should be able to nvflash a firmmware on to your tab. APX mode is the same as nvflash. Do a search for NVflash on the tab and see if you come up with answers. Good luck
And by the way, whhat kind of rooting process where you doing? you should just download the root zip and flash thru stock recovery
Edit: Heres a link that might help http://forum.xda-developers.com/showthread.php?t=1130574
yes i was trying rooting exactly this procedure
http://forum.xda-developers.com/showthread.php?t=1130574
ok i have nvflash command software and stock firmware too
but the problem is, my tab does'nt recognised by odin
then how to flash it
thanks for your help but would you plz tell me how can i flash in apx mode??
Im not sure how its done on Galaxy tab. but in the download package there should be all that is needed for nvflash and you should ad the .img files for system and boot and recovery of the firmware version you want. And there should be a .bat file in the package i think. you should run it from there. But you need to google and collect info about this yourself as i have not done this myself on the Tab. Good Luck
can you boot into recovery? ! Holding volume down and power at the same time?
attu90 said:
can you boot into recovery? ! Holding volume down and power at the same time?
Click to expand...
Click to collapse
no not at all
wish it could boot in recovery so that i would able to install stock from odin
only black screen while apx found in device manager
nickwarn said:
Im not sure how its done on Galaxy tab. but in the download package there should be all that is needed for nvflash and you should ad the .img files for system and boot and recovery of the firmware version you want. And there should be a .bat file in the package i think. you should run it from there. But you need to google and collect info about this yourself as i have not done this myself on the Tab. Good Luck
Click to expand...
Click to collapse
thanks for your answer i have stock firmware
but its tar file not img file
searched on google too
how to flash firmware using nvflash
but could'nt found any useful post
all flash procedures on google are with odin or hemdell
still looking for help
ok after reading lot of pages
its clear that mine is not completly bricked
hope it will alive again
Sheeda Talli said:
ok after reading lot of pages
its clear that mine is not completly bricked
hope it will alive again
Click to expand...
Click to collapse
Good luck, go to this place and ask for help. http://tabletroms.com/forums/forum.php#major-devices-android They have very good guys for nvflash on other devices. And as nvflash is something within tegra2 it should be the same rules that apply for our TAB. Check in Asuus Transformer forum.
well i have checked that forum too
and there are only 10 or 15 threads in every section of samsung 10.1
it clearly shows repo of that forum
anyway i have posted there too, thanks for your advise
no one can ??????????
No luck? If i were you i would PM one of the Devs and see if one of them is in a good mood.
Edit: I was thinking, the nvflash mode is nothing to do with Samsung. Its a tegra2 thing so you should be able to follw the guide from Transformer forum. Just put Tab .img files in there. because the one for Transformer(nvflash package) comes with a .bat file that runs the install process. it goes thru all partions and installs all .img files. but you need to chek with the Dev for Transformer so that there is no partion map for Transformer or something in there.
Hello everyone,
I was trying to launch fastboot but instead of that (I'm not the smartest I guess), I did a full destroy of the system (I think I pressed the power button more than 3 times then got a message telling me to press POW+VOL DOWN to destroy the system, which I did )
Now, when I try to start the tablet, I get nothing but a the red button on. Under windows, it's not detected and the drivers don't install, all I have is :
"other devices ==> APX" in my device manager.
Can someone help me revive the tablet (if it's still possible)?
Thanks!!!
Josefon said:
Hello everyone,
I was trying to launch fastboot but instead of that (I'm not the smartest I guess), I did a full destroy of the system (I think I pressed the power button more than 3 times then got a message telling me to press POW+VOL DOWN to destroy the system, which I did )
Now, when I try to start the tablet, I get nothing but a the red button on. Under windows, it's not detected and the drivers don't install, all I have is :
"other devices ==> APX" in my device manager.
Can someone help me revive the tablet (if it's still possible)?
Thanks!!!
Click to expand...
Click to collapse
Same happened to me and I panicked. I solved it with this guide
http://forum.xda-developers.com/showthread.php?t=1458876
After that, you can do all the necessary pugrades, etc, for CM10 A4 and get your folio working again
yellowumbrella said:
Same happened to me and I panicked. I solved it with this guide
http://forum.xda-developers.com/showthread.php?t=1458876
After that, you can do all the necessary pugrades, etc, for CM10 A4 and get your folio working again
Click to expand...
Click to collapse
Thanks for your help, I have read the whole post and have managed to revive the tablet thanks to NVflash. I used the 16g version as the tablet is a 16g, but I'm stuck to CWM v0.3 and it seems there's nothing I can install under there. Where did you go from there, did you use fastboot to load another rom? Nothing will install under CWM which is making me confused...
Thanks again for your help!!
Josefon said:
Thanks for your help, I have read the whole post and have managed to revive the tablet thanks to NVflash. I used the 16g version as the tablet is a 16g, but I'm stuck to CWM v0.3 and it seems there's nothing I can install under there. Where did you go from there, did you use fastboot to load another rom? Nothing will install under CWM which is making me confused...
Thanks again for your help!!
Click to expand...
Click to collapse
As long as your tablet is out of APX, you should be able to just go ahead and follow this
http://forum.xda-developers.com/showthread.php?t=1864774
to get updated to the latest CM10
hi,
plz help
mine is hox+ device which is rooted
not able to connect with usb port now, doesn't show anything on my windows file explorer
moreover my mobile shows white screen with htc logo and just hangs
I tried factory reset, even though of no use
have used all-in-ont-tool-kit-2.3
tried with adb commands as well
please advice and help to recover my device. I have backup of boot.img on my pc
MyHOX said:
hi,
plz help
mine is hox+ device which is rooted
not able to connect with usb port now, doesn't show anything on my windows file explorer
moreover my mobile shows white screen with htc logo and just hangs
I tried factory reset, even though of no use
have used all-in-ont-tool-kit-2.3
tried with adb commands as well
please advice and help to recover my device. I have backup of boot.img on my pc
Click to expand...
Click to collapse
Do NOT make double threads of the same topic, you already made one : http://forum.xda-developers.com/showthread.php?p=46837019#post46837019
Ghand0ur said:
Do NOT make double threads of the same topic, you already made one : http://forum.xda-developers.com/showthread.php?p=46837019#post46837019
Click to expand...
Click to collapse
sorry, this is the only thread I made to get response as quickly posted.
its true that I did post same content in other thread
I am desperate the recover my phone and looking for help. plz advice
Hi everyone! I'm asking a desperate help to solve a problem about recovery an almost bricked Huawei G610S-U00.
I tell you the story...
Few days ago I've tried to flash the original firmware of this device with the SP Flash Tool. The firmware has been downloaded from another forum.
The flash procedure ends successfully but when I've tried to reboot the phone it powers on correctly but the screen remain black. I can say it turn on correctly because you can see the back ligth of the screen and you also che feel the vibration pushing the power on button.
Now I think that the problem is due to an wrong scatter file or a wrong firmware version.
Now the situation is that the phone turns on and is recognized by the SP Flash Tool and I can do flashing operations but I need the correct files to flash.
Can anyone help me in this situation?
I really thank everyone could help!
Thank you very much
andbrigo said:
Hi everyone! I'm asking a desperate help to solve a problem about recovery an almost bricked Huawei G610S-U00.
I tell you the story...
Few days ago I've tried to flash the original firmware of this device with the SP Flash Tool. The firmware has been downloaded from another forum.
The flash procedure ends successfully but when I've tried to reboot the phone it powers on correctly but the screen remain black. I can say it turn on correctly because you can see the back ligth of the screen and you also che feel the vibration pushing the power on button.
Now I think that the problem is due to an wrong scatter file or a wrong firmware version.
Now the situation is that the phone turns on and is recognized by the SP Flash Tool and I can do flashing operations but I need the correct files to flash.
Can anyone help me in this situation?
I really thank everyone could help!
Thank you very much
Click to expand...
Click to collapse
No one can help?
Same problem here. I've downloaded a rom and flashed via SPFlash tools and I end at black screen. But once connected to usb the phone is recognized by the PC so it can be flashed if I have the right files. So if possible , someone with G610s , please make a whole backup and give us the file so we can flash . Please !
jazzymc said:
Same problem here. I've downloaded a rom and flashed via SPFlash tools and I end at black screen. But once connected to usb the phone is recognized by the PC so it can be flashed if I have the right files. So if possible , someone with G610s , please make a whole backup and give us the file so we can flash . Please !
Click to expand...
Click to collapse
Hi, I've solved the problem using a full backup given me from a friend.
I upload it to a cloud and then I will give you the link.
:good:
Mine is blank as well
andbrigo said:
Hi, I've solved the problem using a full backup given me from a friend.
I upload it to a cloud and then I will give you the link.
:good:
Click to expand...
Click to collapse
Hi bud, i understand it's an old thread but same thing happened to my G610 U00 and the only option i have is a proper rom for sp flashtool, please if you may, upload the link to the one that saved your phone, thanks ahead!