i am having galaxy ace s5830i and it had stock gb and it was not rooted. but i booted it into stock recovery ie android recovery system and flashed cm beta 7 rom
.. and after that flashing completed it said device is ready to use, installation successfull and after that when i rebooted it just got hung on start up logo.....
i tried to boot it in download mode but its not getting in download mode and when tried to boot in android recovery its booting up
i again tried to flash stock gb but installation aborts... and when again flashed cm beta 7 its successfull......
plz help me get out if this..........
Try volume up and power, basically every button combo you can till it gets into download mode (I think it's different on the 5830i.
99% of roms on this forum are for the 5830 only :/
Sent from my GT-S5830 using XDA
saffu said:
i am having galaxy ace s5830i and it had stock gb and it was not rooted. but i booted it into stock recovery ie android recovery system and flashed cm beta 7 rom
.. and after that flashing completed it said device is ready to use, installation successfull and after that when i rebooted it just got hung on start up logo.....
i tried to boot it in download mode but its not getting in download mode and when tried to boot in android recovery its booting up
i again tried to flash stock gb but installation aborts... and when again flashed cm beta 7 its successfull......
plz help me get out if this..........
Click to expand...
Click to collapse
But u CANT flash roms via stock recovery u need cwm recovery
you know you are rooted when you use XDA more than FB
u misunderstood that all methods and roms in s5830 are NOT for s5830i
Hi I have rooted my UK i9100 with odin and successfully installed resurrection remix previously. When trying to flash an updated version I stupidly forgot to factory wipe and now my phone wont boot, it gets stuck on the rom boot screen and i cant get into cwm.
I can get into download mode and from there have tried flashing another rom via odin (litening rom) to see if that would boot to get me into cwm but that freezes on the boot screen also. I tried to use Galaxys2recovery as shown on zedomax youtube channel but then realised that is done from gingerbread only. I tried reflashing "CF-Root-SGS2_XX_OXX_LP6-v5.2-CWM5" via odin and then the litening rom again but that still hangs when trying to boot.
Is there something obvious I should be doing? ..I am (unsuprisingly) a noob
Thank you
you could have asked at the first time itself, before various yourown attempts ?
if you are able to get CWM now, try to install the ROM after data factory reset and all the wipes + system format from Mounts & storage.
if it didnt help again go to CWM do all the wipes and format system, and switch off and get into the download mod and flash a GB stock rom from ODIN
I can get into download mode and from there have tried flashing another rom via odin (litening rom) to see if that would boot to get me into cwm but that freezes on the boot screen also
Click to expand...
Click to collapse
odin if for stock roms not custom roms / .zip files....
zaheedahmed said:
if it didnt help again go to CWM
Click to expand...
Click to collapse
that's the thing, i cant get into cwm, or at least i don't know how to. Is there a file I can install from odin that will put me straight into cwm without having a working rom?
why do you wait to boot the phone to get into the CWM,
didnt you try Vol-up+Home+Power while phone is off
Hi I Have a Lenovo A390 and I'm Having
Trouble going into the recovery
mode,Everytime I Boot Into Recovery
Mode,A dead android icon with a Red
Triangle Appears and nothing happens
(The Icon is like this> cdn.howtogeek.com/wp-content/
uploads/2012/12/android-recovery-
mode.jpg ) I waited 2-3 minutes and still
Nothing happens,What should i do?Should
i install a custom recovery? Or what. I'm
on stock and my phone is rooted,I rooted
it using framaroot. Please Help Me.
Thanks.
U need to install TWRP, coz a390 doesn't have default recovery. Ask Google for TWRP, install using flashtool.
Sent from my Lenovo A390_ROW
JuliusAlfred77 said:
Hi I Have a Lenovo A390 and I'm Having
Trouble going into the recovery
mode,Everytime I Boot Into Recovery
Mode,A dead android icon with a Red
Triangle Appears and nothing happens
(The Icon is like this> cdn.howtogeek.com/wp-content/
uploads/2012/12/android-recovery-
mode.jpg ) I waited 2-3 minutes and still
Nothing happens,What should i do?Should
i install a custom recovery? Or what. I'm
on stock and my phone is rooted,I rooted
it using framaroot. Please Help Me.
Thanks.
Click to expand...
Click to collapse
The stock recovery what you have got.
If you press the home button, you can see the menu.
If you want to install a custom recovery, you can use my ported CWM, which works. This recovery is based on bgcngm ZTE V970 recovery, using his mtktools.
CWM 6.0.1.2 for Lenovo A390
md5sum : 8ef0d0a92682a93fe147436d0ce20549
You can install it - considering that your phone is rooted - with the help of MobileUncleTools; Possible ways from A820 thread.
Ok.Thanks sir :thumbup:
Sent from my Lenovo A390_ROW using xda app-developers app
Red triangle dead android still appears even with your cwm
Hello Cappa. I too have rooted my Lenovo A390 using framaroot. and installed ROM Manager. Initially, ROM manager complained there is no clockworkmod recovery for my device model. I then flashed your clockworkmod recovery using spflashtool. Successful and ROM Manager finally detcted my clockworkmod too as version 5.x.x.x.. But, then when i tried to backup my current ROM, phone reboots and tries to enter recovery mode. But, then the dead android killed by a red triangle still appears. Help me!!!! Somewhere i read that it is the stock recovery icon and the phone should still be able to enter recovery mode using volume up, down buttons. Is it true. Somewhere, I read that TWRP must be used instead, because LENOVO A390 does not have cutom recovery. What should I do next? Suggest. If TWRP should be installed, I would wish to remove CWM first. Is it possible to remove CWM, after it has been flashed?
Sorry for lots of questions.
Will be grateful for your help.
Regards
cappa72 said:
The stock recovery what you have got.
If you press the home button, you can see the menu.
If you want to install a custom recovery, you can use my ported CWM, which works. This recovery is based on bgcngm ZTE V970 recovery, using his mtktools.
CWM 6.0.1.2 for Lenovo A390
md5sum : 8ef0d0a92682a93fe147436d0ce20549
You can install it - considering that your phone is rooted - with the help of MobileUncleTools; Possible ways from A820 thread.
Click to expand...
Click to collapse
ZaiduPaidu said:
Hello Cappa. I too have rooted my Lenovo A390 using framaroot. and installed ROM Manager. Initially, ROM manager complained there is no clockworkmod recovery for my device model. I then flashed your clockworkmod recovery using spflashtool. Successful and ROM Manager finally detcted my clockworkmod too as version 5.x.x.x.. But, then when i tried to backup my current ROM, phone reboots and tries to enter recovery mode. But, then the dead android killed by a red triangle still appears. Help me!!!! Somewhere i read that it is the stock recovery icon and the phone should still be able to enter recovery mode using volume up, down buttons. Is it true. Somewhere, I read that TWRP must be used instead, because LENOVO A390 does not have cutom recovery. What should I do next? Suggest. If TWRP should be installed, I would wish to remove CWM first. Is it possible to remove CWM, after it has been flashed?
Sorry for lots of questions.
Will be grateful for your help.
Regards
Click to expand...
Click to collapse
There can be many reasons for not having the CWM.
You mentioned that you could flash the CWM.
I have not used ROM manager for MTK platform - I don't know if it is compatible with it. I used Mobileuncletools instead: you can change recovery with this program (can be downloaded from PlayStore - free app)
Right after you change the recovery from stock to CWM, then you have to enter into it.
And then make a backup directly from CWM.
This is my suggestion.
Also, I would recommend that run the chinese application remover, right after entering the CWM.
The reason why I suggest it that the stock rom can contain patches, which rewrite all the modified recovery to stock.
can i flash twrp recovery with same scatter file to remove cwm
One more question. I found on several forums that TWRP recovery works for Lenovo A390 and can be flashed using SPFlashtool. Will flashing the TWRP recovery overwrite the CWM recovery, if I use the same scatter file. I guess the scatter file provides the start and end address for flashing into ROM.
chokybali said:
U need to install TWRP, coz a390 doesn't have default recovery. Ask Google for TWRP, install using flashtool.
Sent from my Lenovo A390_ROW
Click to expand...
Click to collapse
Hello,
I visited TWRP site as well as CWM recovery site. Niether of them supports Lenovo_A390_ROW, not listed. I guess coz the brand is new to the market. ROM Manager too complains that the phone model is not supported and I should wait until an official recovery from CWM is available. However, I googled and got one CWM recovery by cappa for Lenovo_A390 but got the dead android triangle. Then, I googled and got a TWRP recovery for Lenovo_A390_Row and flashed this one too (some friends suggested flashing with same scatter file overwrite the previous CWM). But, I still get the dead andorid with triangle icon. What is wrong? I guess the recovery images that I am flashing are not correct. Do you have the correct TWRP recovery image for Lenovo_A390_ROW?
How can I use SPflashtool and make the downloaded cwm 6.012 a scatter file?
ZaiduPaidu said:
Hello Cappa. I too have rooted my Lenovo A390 using framaroot. and installed ROM Manager. Initially, ROM manager complained there is no clockworkmod recovery for my device model. I then flashed your clockworkmod recovery using spflashtool. Successful and ROM Manager finally detcted my clockworkmod too as version 5.x.x.x.. But, then when i tried to backup my current ROM, phone reboots and tries to enter recovery mode. But, then the dead android killed by a red triangle still appears. Help me!!!! Somewhere i read that it is the stock recovery icon and the phone should still be able to enter recovery mode using volume up, down buttons. Is it true. Somewhere, I read that TWRP must be used instead, because LENOVO A390 does not have cutom recovery. What should I do next? Suggest. If TWRP should be installed, I would wish to remove CWM first. Is it possible to remove CWM, after it has been flashed?
Sorry for lots of questions.
Will be grateful for your help.
Regards
Click to expand...
Click to collapse
I downloaded SPflashtool and the CWM recovery image. It says I need a scatter file and it couldn't continue. How do I make that CWM recovery image a scatter file to flash and how do you flash that into the phone using SPflasher? Do I need ROM Manager for that?
hey all,
I had a bootloop issue today. I cant get into recovery but I do have a clockwork backup.
I can still get into download mode
I was on resurrection remix KitKat (Resurrection_Remix_KK_v5.0.3-20140213-i9100) with clockwork Recovery v6.0.4.7
Can you please help me restore my phone
Also could you please confirm that I wont loose my 2step authentication keys.
Thank you!
S1MB4D said:
hey all,
I had a bootloop issue today. I cant get into recovery but I do have a clockwork backup.
I can still get into download mode
I was on resurrection remix KitKat (Resurrection_Remix_KK_v5.0.3-20140213-i9100) with clockwork Recovery v6.0.4.7
Can you please help me restore my phone
Also could you please confirm that I wont loose my 2step authentication keys.
Thank you!
Click to expand...
Click to collapse
You could try to get your phone in download mode and flash the clockworkmod recovery you used for the backup via Odin. Then boot to recovery and restore the backup. Hope this helps.
Hello,
I have a samsung alpha from korea (G850S) and I tried to install the custom rom ResurrectionRemix so I rooted my phone using odin 3 and CF auto root, then I have installed twrp using flashify app and finally installed the rom.
The rom was apparently not stable because it has booted the first time but when I rebooted my phone it was stuck on samsung alpha logo, so I decided to install Jumbo rom.
I made a wipe (system, data ...) and install it using trwp. The problem is the instalation failed and now I have no rom and I can access to trwp anymore
I only have access to download mode and android system recovery <3e>, I have tried to instal trwp again using odin but when I press vol up+home+power I have the samsung alpha logo
With android system recovery I can have adb acess but I dont know what to do.
Could you help me ? Thank you
This happened to me with my g850f. Make official rom installation with odin. Use cf auto root again BUT you must install twrp 3.0.0.0 for higher android versions like lollipop or marsmallow. You can find twrp 3.0.0.0 or higher versions by searching xda forum. After rooting your phone you can install twrp with flashfy. You can find it in play store. Good luck
Sorry for bad english