IMEI NVRAM Restore Tools - Lenovo P780

Hi all users of P780. I have here this tools that can be useful to you.
Link: HERE
Please post some messages with the tool worked for you, and how.
Pressing thanks button will be apreciated! :good:
How to and some explanations.
If your IMEI is not there you can check by going to: your phone settings - About phone - Status (general information) - Information on IMEI. If the IMEI is not there, it means NVRAM damaged.
Now lets see the tutorial:.
How to restore the NVRAM with Maui META 3G and SP META
Youtube Link here on this post: http://forum.xda-developers.com/unite-2/general/guide-repair-imei-invalid-micromax-t3048984
First 3 basic conditions
1. Make sure that you have really damaged NVRAM (the information is up).
2. Charge the smartphone. I recommend to charge it all the way to 100%.
3. Find and download the factory firmware for SP Flash Tool. There must be a base APBD and MODEMDB (usually in the folder of the same name, but rarely in the bulk folder target_bin). Skip this is you have it allready.
Creating a basic structure of NVRAM settings and recording IMEI.
1. Perform clearing the NVRAM or Formatting telephone (recommended) .
2. Remove and reinsert the battery. If this is not possible, after switching off the machine wait for 1 minute not less.
3. Install the drivers.
4. Flash STOCK Firmware.
5. Disconect the phone from PC.
6. AGAIN: Remove and reinsert the battery. If this is not possible, after switching off the machine wait for 1 minute not less.
7. Now with the phone powered off start with button pressed "Volume Down" and "Power" and keep up till the appearance of the logo. On the screen of your smartphone after the logo should appear on a black background "Have been in meta mode". TURN OFF THE PHONE.
8. WITH THE PHONE POWERED OFF connect to a standard computer "MicroUSB cable." In Device Manager, the equipment will appear: "CDC Serial" and "Lenovo XX". Using drivers SP_Drivers_EXE_v1.6.rar device "CDC Serial" to install the drivers "MediaTek Inc. -> MediaTek PreLoader USB VCOM (Android)", the unit "Lenovo XX" install drivers "Google, Inc. -> Android Composite ADB Interface"
9. Start MAUI META
10. In the menu: Actions - Open NVRAM Database. Select the file (usually begins at BPLGUInfoCustomAppSrcP ...) from my modemdb factory firmware for SP Flash Tool. For example for the A850 + file named BPLGUInfoCustomAppSrcP_MT6592_S00_A850 + _V1_1_wg_n and size 5,5MB for A606 file named LWD3I15.1.6.1.3T21A0828_M015.src and size 7.3Mb. The main thing that this file has been included with the firmware that is now on your phone. It is important!
11. Press Reconnect. Flashes circle from red to green.
12. AGAIN: Remove the battery and re-set. If this is not possible, after switching off the machine wait for 1 minute.
13. Turning off the machine connect to a standard computer "MicroUSB cable."
14. If the program is successfully connected to the phone to change the color of a circle of yellow and opens the selected option. ** Before connecting the program selection option is not available, so if it is not "Update parameter" just close the window that appears.
15. In the main window of the program Maui META 3G select "Update parameter"
16. In the "Update parameter" click "Load from file" and select the ini-file with the calibration. Base to restore NVRAM as possible will be augmented with such files.
17. Click Download to Flash
18. Wait until all the blue lettering turn gray, close the "Update parameter".
19. In the main window of the program Maui META 3G select "IMEI Download"
20. Enter in the field without the last of the IMEI numbers (it will be calculated automatically) and click "Download to flash"
21. Go to the second tab. Enter in the field without the last of the IMEI numbers (it will be calculated automatically) and click "Download to flash". If you can not find / remember what was the IMEI, then add to the penultimate figure 8, the checksum will be calculated automatically.
22. IMEI Download Close window and click Disconnect. Phone out of METAMODE and power off.
23. Reboot.
Record MAC-addresses of Bluetooth and Wi-Fi, as well as SN in NVRAM.
1. Start SP_META (Attention! The second program from the set). If the proposed version of the program is not connected to the phone, then we try to pick up a different version .
2. Select the option "AP NVRAM Editor".
3. Press Reconnect. Flashes circle from red to green.
4. Remove the battery and re-set. If this is not possible, after switching off the machine wait for 1 minute.
5. Turning off the machine connect to a standard computer "MicroUSB cable."
6. If the program is successfully connected to the phone screen appears "AP Editor".
7. In the "AP Editor" click "read from NVRAM". The program will ask you APDB. Select the file (usually begins at APDB _...) from my apdb factory firmware for SP Flash Tool. For example for the A850 + file named APDB_MT6592_S01_ALPS.JB9.MP_ and size 163Kb for A606 file named APDB_MT6582_S01_KK1.MP3_ and size 162Kb. The main thing that this file has been included with the firmware that is now on your phone. It is important!
Correction MAC for Bluetooth
1. In the left pane, open the tree: "RDEB LID -> AP_CFG_RDEB_FILE_ BT_ADDR _LID -> 1 "
2. Click "read from NVRAM".
3. In the right pane to open: "ap_nvram_btradio_mt6610_struct -> addr".
4. Fill 6 groups of elements. For example, to assign a MAC Address: 98: FF: DD: A1: 05: 06 must be:
in addr [0] to enter 0x98 (the first character of zero, then the Latin character "X"),
addr [1] - 0xFF,
addr [ 2] - 0xDD,
addr [3] - 0xa1,
addr [4] - 0x05,
addr [5] - 0x06.
5. In the left pane again highlight: "RDEB LID -> AP_CFG_RDEB_FILE_ BT_ADDR _LID -> 1 "
6. Press the "save to NVRAM"
7. Check that the bottom left of the window there was an inscription: "NVRAM write record successfully", and the right side red field addr [0] - addr [6] become black.
8. Click "Clear".
Correction MAC for WIFI
1. In the left pane, open the tree: "RDEB LID -> AP_CFG_RDEB_FILE_ WIFI _LID -> 1 "
2. Click "read from NVRAM".
3. In the right pane to open: "WIFI_CFG_PARAM_STRUCT -> aucMacAddress".
4. Fill 6 groups of elements. For example, to assign a MAC Address: 98: FF: DD: A2: 05: 06 must be:
in aucMacAddress [0] to enter 0x98 (the first character of zero, then the Latin character "X"),
aucMacAddress [1] - 0xFF,
aucMacAddress [ 2] - 0xDD,
aucMacAddress [3] - 0xa2,
aucMacAddress [4] - 0x05,
aucMacAddress [5] - 0x06.
5. In the left pane again highlight: "RDEB LID -> AP_CFG_RDEB_FILE_ WIFI _LID -> 1 "
6. Press the "save to NVRAM"
7. Check that the bottom left of the window there was an inscription: "NVRAM write record successfully", and the right side red field aucMacAddress [0] - aucMacAddress [6] become black.
8. Close window "AP Editor".
9. The "SP Meta Tool" click "Disconnect" and close the program.
How to format the phone ...
It is recommended to make mandatory before starting the recovery process NVRAM.
1. Download and Start SP_Flash_Tool_v5.
2. Charge your phone 100%.
3. Disconnect the device from the charger or PC
4. Turn off your phone.
5. Remove the battery and re-set. If this is not possible, after switching off the machine wait for 1 minute.
6. Turning off the machine connect to a standard computer "MicroUSB cable." In Device Manager, the equipment will appear: "MT65xx Preloader"
7. At this step you must install the drivers
8. Disconnect the device from the computer and set aside.
9. Start SP FlashTool 5.1352.01 , and load the scatter-file **.
10. Open tab Format, set the switch to "Auto Format Flash" and "Format whole flash except Bootloader"
11. Click the Start button in the program SP_Flash_Tool.
12. Connect the phone
13. The program will run SP_Flash_Tool red and green stripe, and the program will display a window with a green circle and a bird .
14. Disconnect the device from your computer.
SN WRITE TOOL TUTORIAL TESTED AND WORKING
The process is performed in two steps.
Step one
1. Install the drivers, CDC drivers must be installed manualy! NOT OPTIONAL!
2. After instalation of the drivers disconect the phone.
3. Download SP Flash Tool from here: https://drive.google.com/folderview?id=0B_B98oK4DpK1S1l2bXRkTGxhVFk&usp=sharing
4. To format the phone using SP FlashTool:
a) Choose scatter file from the factory firmware.
b) Click "Format" and choose the radio button "Format whole flash except Bootloader" and press OK. Wait until the operation is complete.
5. Flash the phone stock firmware from here: http://forum.xda-developers.com/lenovo-p780/development/p780-stock-rom-links-t2842399
Step two
1. After flashing stock firmware disconect the phone from PC or Notebook. Boot at least once.
2. In the google drive you have all the drivers you need in each folder for each tool.
3. Power down the phone. Start the phone by Holding pressed "Power" and "Volume down". The phone will boot in Metamode. The screen will display: "Have been in meta mode, long press the power button and the normal boot". In this state, connect the phone to PC and install drivers ADB and CDC Serial, which are given in drive.
4. After drivers instalation disconect the phone and keep him powered off for at least 1 minute.
5. Install and open SN WRITE TOOL
6. Load files under apdb, ap_modem_db_p780, modem_db
7. Now run the program SN WRITE TOOL and configure as in the screenshot.
8. Disconect the phone again and keep him powered off for at least 1 minute.
9. Press the Start button on SN WRITE TOOL. One window will appear with the option to write 2 IMEI`s option b from below.
a. In the first window you want to record the serial number of "Please scan SN", it looks something like this "are 0123456789abcdef" and press Enter;
b. In the second box IMEI Scaner" to write 2 IMEI and press OK;
c. In the third window, "Please scan SmartPhone BT adress" to enter the Bluetooth address, it looks like "80cf41750505" and press Enter;
d. In the fourth box, "Please scan Wifi MAC then ower On phone" to enter the address of Wi-Fi, it looks like "80cf41760606" and press Enter. (If after the prescription SN you have problems with communication and in the settings, when viewing information about IMEI error settings application, in the field of SN do not enter anything!)
10. Power on the phone in Meta Mode and connect the phone to PC. Wait for the Write Result Indicator to become from black to green. (When the line "Step: Meta Disconnect with target" may disconnect your phone and try again)
11. Disconect the phone and keep him powered off for at least 1 minute.
12. Turn on your phone and to check the efficiency of telephony, Bluetotth and Wi-Fi.
13. If you have NVRAM WARNING: Err = 0x10 error flash WIFI FIX from attached file.
14. Good Luck.

RESERVED FOR FUTURE INFORMATION

@stympy, man you are awesome. great work. thank you.

No one tested this tools?
No feedback here ?
Anyone ?

stympy said:
No one tested this tools?
No feedback here ?
Anyone ?
Click to expand...
Click to collapse
I tried to restore mac addr bluetooth and wifi, but no results. Bluetooth addres passed, wifi mac always was wrong (I wrote both them just after buing phone, but unfortunately I didn't make nvram backup) My phone lenovo p780 2014 (speed version). I tried to use many tools (probably all possible). Maybe I have wrong modemdb file? Installed rom is 226 (Kitkat), rooted, twrp. I tried to restore nvram.img (file from web)- no results.
Regards

gitbroda said:
I tried to restore mac addr bluetooth and wifi, but no results. Bluetooth addres passed, wifi mac always was wrong (I wrote both them just after buing phone, but unfortunately I didn't make nvram backup) My phone lenovo p780 2014 (speed version). I tried to use many tools (probably all possible). Maybe I have wrong modemdb file? Installed rom is 226 (Kitkat), rooted, twrp. I tried to restore nvram.img (file from web)- no results.
Regards
Click to expand...
Click to collapse
Thanks for your feedback! Did you tried stock JellyBean firmware?

Yes, but not every tool. I will try to flash 116 rom, i tried already few times with 228 preloader, but something was wrong. I'll try to use different preloader...

I flashed 136 rom (4.2.1)
I tried to restore everything (four in one)
result:
"OK: Connect to target successfully.
>>Step: Start to write Wifi MAC.
Error: Write Wifi MAC fail. Meta Result = META_INVALID_ARGUMENTS"
I don't know correct serial (I bought only mainboard and I forgot to write it down)
Maybe this is a reason?

gitbroda said:
I flashed 136 rom (4.2.1)
I tried to restore everything (four in one)
result:
"OK: Connect to target successfully.
>>Step: Start to write Wifi MAC.
Error: Write Wifi MAC fail. Meta Result = META_INVALID_ARGUMENTS"
I don't know correct serial (I bought only mainboard and I forgot to write it down)
Maybe this is a reason?
Click to expand...
Click to collapse
must be... it is possible!
did you tried one by one ?

maybe I wrote something wrong in MAC addr...?
>>Step: Scan Smart Phone Wifi MAC.
OK: Wifi MAC = "00082268bffb".
>>Step: Start to Connect with target.
COM port searching and Kernel handshake
COM port searching and preloader handshake ok
COM port searching and Kernel handshake
OK: Connect to target successfully.
>>Step: Start to write Wifi MAC.
Error: Write Wifi MAC fail. Meta Result = 10

gitbroda said:
maybe I wrote something wrong in MAC addr...?
>>Step: Scan Smart Phone Wifi MAC.
OK: Wifi MAC = "00082268bffb".
>>Step: Start to Connect with target.
COM port searching and Kernel handshake
COM port searching and preloader handshake ok
COM port searching and Kernel handshake
OK: Connect to target successfully.
>>Step: Start to write Wifi MAC.
Error: Write Wifi MAC fail. Meta Result = 10
Click to expand...
Click to collapse
try to write thisway: Wifi MAC = "00:08:22:68:bf:fb".
Iff thisdont work try this: https://www.youtube.com/watch?v=8ejnFB5i5o8
Tell me what is going on !

Thank You for Your help!
Anyway... it doesn't work
In Sn_station is possible only to write 12 digits, no one more
I tried to do this Youtube way, precisely copied files, changed permissions, doesn't work too
I lost both Mac addresses after rooting phone vroot aplication
Now system shows them just: "unavaible"
What is interesting, bluetooth addres passed sn_station, but bluetooth doesn't work anyway
Regards

gitbroda said:
Thank You for Your help!
Anyway... it doesn't work
In Sn_station is possible only to write 12 digits, no one more
I tried to do this Youtube way, precisely copied files, changed permissions, doesn't work too
I lost both Mac addresses after rooting phone vroot aplication
Now system shows them just: "unavaible"
What is interesting, bluetooth addres passed sn_station, but bluetooth doesn't work anyway
Regards
Click to expand...
Click to collapse
Hi. I have modified the tutorial nr. 2 and now iti is working. Tested.

stympy said:
Hi. I have modified the tutorial nr. 2 and now iti is working. Tested.
Click to expand...
Click to collapse
stympy i could not understood step 6 in SN write tool method.

bauuuuu said:
stympy i could not understood step 6 in SN write tool method.
Click to expand...
Click to collapse
In stock firmware, in the archive you will find 2 files. That are the files from step 6. Look in what i have posted on the google drive. There are the files.

stympy said:
In stock firmware, in the archive you will find 2 files. That are the files from step 6. Look in what i have posted on the google drive. There are the files.
Click to expand...
Click to collapse
All is good. I was missing the CDC driver installation. Now all OK

Hi @stympy
I restored my imei using sn write tool but i wrote imei 1 and 2 manually, automatically it didnt detect .
Anyway it fixed my imei problem .
I skipped BT address how to get BT address ??

kishanjith said:
Hi @stympy
I restored my imei using sn write tool but i wrote imei 1 and 2 manually, automatically it didnt detect .
Anyway it fixed my imei problem .
I skipped BT address how to get BT address ??
Click to expand...
Click to collapse
Dont understand!
This tool do not detect your IMEI!
You must write your IMEI in that boxes! Manualy!
When the green sesor appear it is done !

8. WITH THE PHONE POWERED OFF connect to a standard computer "MicroUSB cable." In Device Manager, the equipment will appear: "CDC Serial" and "Lenovo XX". Using drivers SP_Drivers_EXE_v1.6.rar device "CDC Serial" to install the drivers "MediaTek Inc. -> MediaTek PreLoader USB VCOM (Android)", the unit "Lenovo XX" install drivers "Google, Inc. -> Android Composite ADB Interface"
Click to expand...
Click to collapse
Download Driver_Auto_Installer_v1.1236.00_.7zip
SP_Drivers_EXE_v1.6.rar
But still cannt install CDC Serial Driver
use "SP_Drivers_EXE_v1.6\cdc-acm.inf " , computer prompt " You select inf file not support this install method“ . (In fact , computer give Chinese message , I translate
use "Driver_Auto_Installer_v1.1236.00\install.bat", computer prompt ” System can not find the path specified ".
My computer os is win7 32bit . I use administrator account . P780 4G ,
If you know how to solve , Please inform

. In the menu: Actions - Open NVRAM Database. Select the file (usually begins at BPLGUInfoCustomAppSrcP ...) from my modemdb factory firmware for SP Flash Tool. For example for the A850 + file named BPLGUInfoCustomAppSrcP_MT6592_S00_A850 + _V1_1_wg_n and size 5,5MB for A606 file named LWD3I15.1.6.1.3T21A0828_M015.src and size 7.3Mb. The main thing that this file has been included with the firmware that is now on your phone. It is important!
Click to expand...
Click to collapse
Open NVRAM Database , Meta2_3G prompt " Execution Failure : Initialize NVRAM database file."
I found "BPLGUInfoCustomAppSrcP_MT6589_S00_P780_V23 " in ap_modem_db_P780.7z and modemdb.7z and I try twice . Meta2_3G still prompt " Execution Failure : Initialize NVRAM database file."

Related

Step By Step: Unbrick Your Hermes

This tutorial is for who have problem No GSM, device hangs on startup or black screen after startup animation. Just follow the procedure;
1. Download Visual Studio 2005 and Microsoft Windows CE 6.0 Embedded.
2. Click setup.exe and choose to install Visual Studio 2005 Professinal.
3. Now install Microsoft Winows Embedded CE 6.0
4. Disable USB connection in Microsoft Active Sync.
5. Open Visual Studio 2005, first time it will ask for default environment, select Visual C++.
6. Select File > New > Project
7. Select Platform Builder for CE 6.0, click OK.
8. Design Wizard will come up. Click Next
9. Select Device Emulator: ARMV4I, Click Next.
10. Select Custome Device, click Next.
11. Now Click next, next , next .... , leave all the boxes blank and finish the wizard.
12. Click Build > Copy files to release Directory
13. Again Click Build > Make Run-Time Image
14. Click Build > Open Release Directory in Build Window
now notice the path (its like C:\WINCE600\OSDEsigns\OSDesign1\OSDesign1\ReDir\DeviceEmulator_ARMV4I_Debug) and open the folder manually from Windows Explorer.
15. Copy nk.bin , ril.dll , rilgsm.dll , serial_cmd.dll , stk_service.dll to that folder (see attachment for the dll's and bin)
16. Now go to Target > Connectivity Options and set like below
Download=Emulator (set to 256MB)
Transport=Usb
Debug=None
17. Now open your phone in KITL mode (COM MANAGER + POWER) and attach to PC USB.
18. Click Target > Attach Device
Process will start, wait around 2-3 min and you will see your device run up (do calibration if need but don't remove USB cable)
19. I tell you again don't remove usb cable at this stage, otherwise your device will hang up and you have to do the whole process again.
20. Now copy SSPL_HERM.exe in a MMC and insert that to device, go to File Explorer and execute that. Device will go to tri-color boot screen.
21. Now Flash RUU_Radinly_1.27.00.00.exe, it will take some minutes so be patient.
Your phone is unbricked.
this procedure is also for No GSM, but the device run the OS, but when i try to update only GSM radio ROM it stucks on 0%.. i think not!??!
What about no GPRS
Is there a possibility this could fix a problem where i can make phonecalls ok but cannot connect to gprs/3g/edge? (i have posted about this recently.):
http://forum.xda-developers.com/showthread.php?t=611014
very usefull this new guide since win ce 5 not avaible anymore on microsoft site. thx for your work
can't make it KITL mode (COM MANAGER + POWER)
any screen shuts or other help pls. thx
in bootmode or windows splash screen the result is the same: "invalid or missing ROM".
I waited at list 15 min each time
Which button is com manager ?
Thanx !
Please tell me which button is com manager !
Thanx !
See right side, in the middle.
13. Again Click Build > Make Run-Time Image
receive an error when making img. !
can't pass this point. Any help!!!
i can't download Windows CE 6.0 Embedded. who can share link for me? please!!!
thanks!!!!!
you know wich ...
you know wich rom have KITL?...
Request
It would be a great Help if you could upload the Run-Time image that is made in step 13.
13. Again Click Build > Make Run-Time Image
Click to expand...
Click to collapse
I am having problems with this step.

USB Device not recognised

Hi All,
I flashed my HD2 ROM last night, and after that everything was working except, I could not make a call or receive a call.
I tried pulgging into my PC with windows 7 ultimate, and it's saying USB device not recognised.
ROM i used is miri HD2 ROM-v19.0 WWE
Can someone please help me with this?
First you will have to remove all references to the failed usb connection:
as Administrator,go to My Computer <Right Click> Properties <Left Click>
select tab "Advanced"
Click Environment variables
Create following Environment variables in the system section:
Code:
DEVMGR_SHOW_DETAILS
and assign it a value of 1
Code:
DEVMGR_SHOW_NONPRESENT_DEVICES
and assign it a value of 1
Click OK twice
Next: go to My Computer <right-click> Manage <Left-click>
go to device manager.
select view > show hidden devices,
then:
Remove all devices with a questionmark
Remove all devices which are greyed out and which you can relate to your mobile
Once you have done this, reboot for certainty.
Try again, making sure to insert USB connector first in your Phone, afterwards in a fast, secure way in your PC. Do not "hesitate" while connecting USB connector. (sometimes slow/not complete insertion may cause this problem too)
Wilco said:
First you will have to remove all references to the failed usb connection:
as Administrator,go to My Computer <Right Click> Properties <Left Click>
select tab "Advanced"
Click Environment variables
Create following Environment variables in the system section:
Code:
DEVMGR_SHOW_DETAILS
and assign it a value of 1
Code:
DEVMGR_SHOW_NONPRESENT_DEVICES
and assign it a value of 1
Click OK twice
Next: go to My Computer <right-click> Manage <Left-click>
go to device manager.
select view > show hidden devices,
then:
Remove all devices with a questionmark
Remove all devices which are greyed out and which you can relate to your mobile
Once you have done this, reboot for certainty.
Try again, making sure to insert USB connector first in your Phone, afterwards in a fast, secure way in your PC. Do not "hesitate" while connecting USB connector. (sometimes slow/not complete insertion may cause this problem too)
Click to expand...
Click to collapse
I'm interested if this works... Still have a Touch Pro2 with the same message, so I will try the same for that device. Thanks for showing the hidden devices!

[A] Resolving one cause of warning "Device Cannot Start (Code 10)"

Hi,
I've just spent a few hours trying to fix a problem with Kies and Windows 7. I had just used Odin3 and download mode to download a Chainfire kernel onto my GT-I9100, and afterword when I connected my phone Windows 7 would try installing drivers and fail on the MTP driver. I tried a lot of things to fix the problem, the only information I could get on it was an error message "Device Cannot Start (Code 10)".
I had spotted that when connecting my phone in download mode to Odin3 that Windows 7 had detected and installed a driver for "Unknown Device". On a hunch that this driver was causing the issue with connecting after using Odin3 I tried to completely uninstall it.
This is what I did (the first 8 or 9 steps are just to enable Device Manager to show *inactive* device drivers so you can uninstall the Unknown device. I've nicked this these steps from another site since I'm not allowed to link it yet):
1. Go to Control Panel and double click on System. You can also right-click "Computer" on the Start menu (or on the desktop if it's shown there) and choose Properties.
Note: A faster way for opening up the System applet is to press the Windows logo key on your keyboard and then press Pause/Break at the same time.
2. Click on "Advance System Settings" link, and then click on the "Environment Variables" button.
3. In the System Variables section click on the "New" button.
4. In the New System Variable dialog box, under the Variable Name value enter devmgr_show_nonpresent_devices (just copy the value from here and paste it there) and give it a variable value of 1.
Click Ok.
5. In the Environment Variables window notice how the new variable appeared in the System Variables section. Click Ok.
6. In the System Properties window click Ok.
7. Log off and log on.
8. Open Device Manager (Control Panel > System > Hardware > Device Manager).
9. From the View menu click Show Hidden Devices and searched for Unknown Device under Portable Device and USB Devices.
10. Right click the Unknown Device and select to uninstall, making sure to select complete removal of drivers option.
11. Restart the PC.
12. Start Kies without plugging the phone in.
13. Click on Troubleshooting for USB device and continue until it repairs the drivers.
14. Reboot the PC. Open Kies and plugin the phone again and let it reinstall the drivers.
Hope this sheds some light on this pernicious issue.

[Q] LG L3 E430 Security Error - wont boot

As the title says my LG L3 E430 wont boot up. The LG logo appears for a moment, disappears, then reappears with the words Security Error beneath it. It then shuts down
Confession time...Been a long time since I rooted my HTC and jumped straight in to the "how to" below out of boredom I guess!.....
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit
Everything seemed to go as planned until step 8. My PC no longer recognised the phone so I removed SD card and copied Framaroot to it. It was around this time I remembered about bootloader and thought DARN! I've screwed up
Anyway before I get the pleasure of smashing it with a sledge hammer (hated it from day one!) I thought I would ask if there is anyway back from this situation....
It will go into download mode but pc doesn't see it and I cant access it because, as I said, it turns on, Security Error comes up and then it shuts down.
regards
J
belfastjohn said:
As the title says my LG L3 E430 wont boot up. The LG logo appears for a moment, disappears, then reappears with the words Security Error beneath it. It then shuts down
Confession time...Been a long time since I rooted my HTC and jumped straight in to the "how to" below out of boredom I guess!.....
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit
Everything seemed to go as planned until step 8. My PC no longer recognised the phone so I removed SD card and copied Framaroot to it. It was around this time I remembered about bootloader and thought DARN! I've screwed up
Anyway before I get the pleasure of smashing it with a sledge hammer (hated it from day one!) I thought I would ask if there is anyway back from this situation....
It will go into download mode but pc doesn't see it and I cant access it because, as I said, it turns on, Security Error comes up and then it shuts down.
regards
J
Click to expand...
Click to collapse
THIS GUIDE IS FOR UN-BRICKING ALL KNOWN TO ME LG Lx PHONES ON WINDOWS BASED COMPUTERS
(Virtual Machine Will Work )
THIS GUIDE ASSUMES YOU HAVE DRIVERS INSTALLED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE KDZ UPDATE PROGRAM
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE .kdz FIRMWARE DOWNLOADED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<​
1. Plug USB cable to PC
2. Take battery out of phone
3. Press and hold VOL- button
4. Plug USB cable to phone
5. Wait few seconds ... (it should display "Download Mode" on black screen)
6. Put battery back in phone
7. UPDATE YOUR KDZ NOW
8. navigate to phone settings and security and preform wipe/master reset (not obligatory but ensures "clean rom" )
​
Enjoy your NEW OLD phone
also check my thread for bootloader and cwm (NO MORE ERRORS)
Many thanks...worked a treat:good:

Root, cwm Recovery, Readback Micromax Canvas Nitro 2 3E11

Steps:
1. Download Mtk droid Tools, SP Flash Tools, drivers for your phone, (no need, just connect your e311 to pc and choose connect as buil in cd rom and install drivers).
2. People having windows 8/8.1/7 first of all disable driver signature verification(google it, pretty easy)
e.g. on windows 8/8.1 go to bottom right corner,choose setting on charm bar,select change pc settings, update and recovery,go to recovery,advance start up,restart, advance startup/troubleshooting, disable driver signature verification by pressing 7 on keyboard(you need physical keyboard, touch keyboard won't be there).
3. READBACK ROM BACKUP
i. open/run as administrator MTK droid Tools, your phone should be switched on, connect it,accept usb connection on phone, let the droid tools detect it and show its specifications.(make sure usb debugging is enabled)
ii. click on blocks map, a window tile of block info will pop up. Note down or better save it using notepad++/screenshot by pc or ms word file, you need values of preloader and userdata/(some other phones may show FAT,don't panic,it's just your internal sd partition) under scatter column(also note the values under size column for backing up a single item like recovery, for entire rom you only need scatter column values of preloader and userdata/FAT).
iii. alongwith block info, a tile asking to creat scatter file will pop up, create it. This will be our scatter file for SP Flash Tools.
iv. Disconnect usb, switch off phone. you may close mtk droid tools, it will be needed after next step.
4. Open/Run SP Flash Tools as administrator,
i. click scatter loading and select previously created scatter file.
ii. click on readback tab on sp flash tools..then click on add button.
iii. double click on the item (it should be checked in the selection box)and save it as ROM_0(default) or ROM_1 , it does not matter.This will be a large file approx 3.2 GB so save it to a dedicated folder on pc not usb.
iv. next readback block address tab will open, under start address value will be like 0x00000000, leave it as it is(don't change to 0x0), under length use the value under scatter column of userdata/FAT previously noted in block info..Make note that value entered should be like 0x1234567 and not like 0x0001234567. the zeros after 0x should be removed and only till first non zero value after that and middle zeros like 120458000 shoud be written as it is. The length value may be numeric for some phones but e311 will show like 0x000CDF7000, Don't worry enter it like 0xCDF7000. This is just example not actual value, i assume each phone will show different value.
v. after entering length and pressing ok, click readback and now connect switched off phone.
vi. after that click ok and wait for readback to complete. It will take about 7-11 minutes depending on your pc processor. a green check will appear on completion.
vii. close Sp flash tools, disconnect usb. switch on phone.
5. Open MTK droid tools,connect switched on phone,select the root,backup,recovery tab.
6.Click*To*process*file*ROM_*from*Flash*Tool.
7. *Select*the*ROM_1*file*you*saved*in*the*step*above*in*the*window*that*pops*up.
8.*Wait*for*MTK*Droid*tools*to*finish*copying.
9. *When*prompted*to*make*CWM*Recovery*automatically,*click*Yes*or*No*.*If*you*click*Yes,*you'll*need*to*select
the*Recovery.img*from*the*window*that*pops*up.This will make cwm recovery, take backup of stock recovery.
10. Your Rom backup will be in MTK DROID TOOLS/backup folder. You can now flash cwm created in backup with Sp Flash Tools and also root your phone by flashing supersu.
hem.crz said:
Steps:
1. Download Mtk droid Tools, SP Flash Tools, drivers for your phone, (no need, just connect your e311 to pc and choose connect as buil in cd rom and install drivers).
2. People having windows 8/8.1/7 first of all disable driver signature verification(google it, pretty easy)
e.g. on windows 8/8.1 go to bottom right corner,choose setting on charm bar,select change pc settings, update and recovery,go to recovery,advance start up,restart, advance startup/troubleshooting, disable driver signature verification by pressing 7 on keyboard(you need physical keyboard, touch keyboard won't be there).
3. READBACK ROM BACKUP
i. open/run as administrator MTK droid Tools, your phone should be switched on, connect it,accept usb connection on phone, let the droid tools detect it and show its specifications.(make sure usb debugging is enabled)
ii. click on blocks map, a window tile of block info will pop up. Note down or better save it using notepad++/screenshot by pc or ms word file, you need values of preloader and userdata/(some other phones may show FAT,don't panic,it's just your internal sd partition) under scatter column(also note the values under size column for backing up a single item like recovery, for entire rom you only need scatter column values of preloader and userdata/FAT).
iii. alongwith block info, a tile asking to creat scatter file will pop up, create it. This will be our scatter file for SP Flash Tools.
iv. Disconnect usb, switch off phone. you may close mtk droid tools, it will be needed after next step.
4. Open/Run SP Flash Tools as administrator,
i. click scatter loading and select previously created scatter file.
ii. click on readback tab on sp flash tools..then click on add button.
iii. double click on the item (it should be checked in the selection box)and save it as ROM_0(default) or ROM_1 , it does not matter.This will be a large file approx 3.2 GB so save it to a dedicated folder on pc not usb.
iv. next readback block address tab will open, under start address value will be like 0x00000000, leave it as it is(don't change to 0x0), under length use the value under scatter column of userdata/FAT previously noted in block info..Make note that value entered should be like 0x1234567 and not like 0x0001234567. the zeros after 0x should be removed and only till first non zero value after that and middle zeros like 120458000 shoud be written as it is. The length value may be numeric for some phones but e311 will show like 0x000CDF7000, Don't worry enter it like 0xCDF7000. This is just example not actual value, i assume each phone will show different value.
v. after entering length and pressing ok, click readback and now connect switched off phone.
vi. after that click ok and wait for readback to complete. It will take about 7-11 minutes depending on your pc processor. a green check will appear on completion.
vii. close Sp flash tools, disconnect usb. switch on phone.
5. Open MTK droid tools,connect switched on phone,select the root,backup,recovery tab.
6.Click*To*process*file*ROM_*from*Flash*Tool.
7. *Select*the*ROM_1*file*you*saved*in*the*step*above*in*the*window*that*pops*up.
8.*Wait*for*MTK*Droid*tools*to*finish*copying.
9. *When*prompted*to*make*CWM*Recovery*automatically,*click*Yes*or*No*.*If*you*click*Yes,*you'll*need*to*select
the*Recovery.img*from*the*window*that*pops*up.This will make cwm recovery, take backup of stock recovery.
10. Your Rom backup will be in MTK DROID TOOLS/backup folder. You can now flash cwm created in backup with Sp Flash Tools and also root your phone by flashing supersu.
Click to expand...
Click to collapse
Bro can you plz tell how to install drivers ,mtk droid tool is not detecting e311.along with download links of drivers. Mine windows is xp
Sent from my Micromax E311 using XDA Free mobile app
akashjasani13 said:
Bro can you plz tell how to install drivers ,mtk droid tool is not detecting e311.along with download links of drivers. Mine windows is xp
Sent from my Micromax E311 using XDA Free mobile app
Click to expand...
Click to collapse
Installing Drivers for Micromax Cannvas Nitro 2 E311:
(A) Enable usb debugging on E311:
1. Go to settings, about phone, tap on build number 7 times to enable developer options.
2. Select developer option, check box for usb debugging, thats it.
3. Also allow installation of apps from unknown sources under Personal/security in settings menu...useful for installation of apps that are not from play store.
(B) Install Drivers:
1. Connect Switched on or even switched off phone with pc via usb cable. It will automatically install driver.
If step 1 does not work for you then
2. Connect your phone via usb, it will be connected as MTP Device. Change it to connect as Built in CD Rom. It will show as cd drive/micromax e311.
3. Open it, there will be drivers folder alongwith usb guide(useless).
4. Inside drivers folder, there is drivers auto installer,within that folder you will find drivers with installation instruction on excel sheet.
It should work but even if it does not then search google for auto drivers installer for micromax devices or pda net or drivers for specific model no. like e311, a311, etc.
MTK DROID Tools Not reading phone:
1. Just check if you have usb debugging allowed or not. If not then do so as explained above.
2. When you connect switched on phone via usb to pc, MTK Droid Tools should be running as administrator(not necessary on windows Xp).
3. After running MTK Droid Tools and connecting usb, a message will pop up on phone asking to allow/accept usb debugging for droid tools, allow/accept it.... wait for few seconds and MTK droid tools will show info for E311 as connected.
In case of difficulties search mediafire.com for drivers, picture guide for readback backup,root and recovery, cwm image and MT6592_Android_scatter uploaded by me. I was trying to post them here but XDA won't allow it as it's my 2nd post only and they allow it after 10 posts only. I'm giving the file names as searching will be easier i hope
1. How_to_Get_Stock_ROM_RomDump_of_Mediatek_MT6582_via_MTK_Droid_Root_and_Tools_-_GSM-Forum.pdf
2. Micromax-E311_150522__recovery_150724-082456.img
3. MT6592_Android_scatter.txt
4.How_to_make_a_ROM_backup_Dump_using_Sp_Flash_Tool_Read_Back.pdf
5. Supersu
6. Drivers for Micromax E311
hem.crz said:
Installing Drivers for Micromax Cannvas Nitro 2 E311:
(A) Enable usb debugging on E311:
1. Go to settings, about phone, tap on build number 7 times to enable developer options.
2. Select developer option, check box for usb debugging, thats it.
3. Also allow installation of apps from unknown sources under Personal/security in settings menu...useful for installation of apps that are not from play store.
(B) Install Drivers:
1. Connect Switched on or even switched off phone with pc via usb cable. It will automatically install driver.
If step 1 does not work for you then
2. Connect your phone via usb, it will be connected as MTP Device. Change it to connect as Built in CD Rom. It will show as cd drive/micromax e311.
3. Open it, there will be drivers folder alongwith usb guide(useless).
4. Inside drivers folder, there is drivers auto installer,within that folder you will find drivers with installation instruction on excel sheet.
It should work but even if it does not then search google for auto drivers installer for micromax devices or pda net or drivers for specific model no. like e311, a311, etc.
MTK DROID Tools Not reading phone:
1. Just check if you have usb debugging allowed or not. If not then do so as explained above.
2. When you connect switched on phone via usb to pc, MTK Droid Tools should be running as administrator(not necessary on windows Xp).
3. After running MTK Droid Tools and connecting usb, a message will pop up on phone asking to allow/accept usb debugging for droid tools, allow/accept it.... wait for few seconds and MTK droid tools will show info for E311 as connected.
In case of difficulties search mediafire.com for drivers, picture guide for readback backup,root and recovery, cwm image and MT6592_Android_scatter uploaded by me. I was trying to post them here but XDA won't allow it as it's my 2nd post only and they allow it after 10 posts only. I'm giving the file names as searching will be easier i hope
1. How_to_Get_Stock_ROM_RomDump_of_Mediatek_MT6582_via_MTK_Droid_Root_and_Tools_-_GSM-Forum.pdf
2. Micromax-E311_150522__recovery_150724-082456.img
3. MT6592_Android_scatter.txt
4.How_to_make_a_ROM_backup_Dump_using_Sp_Flash_Tool_Read_Back.pdf
5. Supersu
6. Drivers for Micromax E311
Click to expand...
Click to collapse
Thank you for the expanation i already had install driver from built cd rom but adb android interface/htc android interface is showing exclamation mark on device manager
Sent from my Micromax E311 using XDA Free mobile app
Use kingroot. Its 100% working. Try it.
Sent from my Micromax E311 using XDA Free mobile app
What about custom rom for this device
Sent from my Micromax E311 using XDA Free mobile app
Can any one please give me Custom rom for this device ?
stuck
after i flashed cm 12.1 from one of the threads using cwm everything was working fine but after i made a data wipe it won't turn on . and it had low battery so after a while it turned off . now even the pc is not recognizing it . i don't know what to do , someone please helpppp

Categories

Resources